Quirk for reboot stalls on a Dell Optiplex 330
PATCH 1/1 Quirk for reboot stalls on a Dell Optiplex 330
Quoted 1 line
From
6269c416487b41576107ef6f535639d3177daa43Mon Sep 17 00:00:00 2001
From: Leann Ogasawara <[email protected]>
Date: Wed, 12 Nov 2008 17:01:54 -0600
Subject: [PATCH] Quirk for reboot stalls on a Dell Optiplex 330
Dell Optiplex 330 appears to hang on reboot. This is resolved by adding a quirk to set bios reboot.
--- arch/x86/kernel/reboot.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)
arch/x86/kernel/reboot.c +9 -0
@@ -169,6 +169,15 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "0KW626"), }, }, + { /* Handle problems with rebooting on Dell Optiplex 330 with 0KP561 */ + .callback = set_bios_reboot, + .ident = "Dell OptiPlex 330", + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Dell Inc." ), +DMI_MATCH (DMI_PRODUCT_NAME ,"OptiPlex 330" ), + DMI_MATCH(DMI_BOARD_NAME, "0KP561"), + }, + }, { /* Handle problems with rebooting on Dell 2400's */ .callback = set_bios_reboot, .ident = "Dell PowerEdge 2400",
Signature · 1 line
1.5.6.3
Ingo Molnar
AppliedQuoted 5 lines · Steve Conklin
Quoted 1 line
From
6269c416487b41576107ef6f535639d3177daa43Mon Sep 17 00:00:00 2001From: Leann Ogasawara <[email protected]>
Date: Wed, 12 Nov 2008 17:01:54 -0600
Subject: [PATCH] Quirk for reboot stalls on a Dell Optiplex 330
Quoted 8 lines
Dell Optiplex 330 appears to hang on reboot. This is resolved by adding a quirk to set bios reboot.
Signed-off-by Leann Ogasawara <[email protected]>Signed-off-by Steve Conklin <[email protected]>--- arch/x86/kernel/reboot.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)
applied to tip/x86/quirks, thanks Steve!
arch/x86/kernel/reboot.c static struct dmi_system_id __initdata reboot_dmi_table[] = { · line 178
Quoted 7 lines
arch/x86/kernel/reboot.c +7
-0+ {/* Handle problems with rebooting on Dell Optiplex 330 with 0KP561 */ + .callback = set_bios_reboot, + .ident = "Dell OptiPlex 330", + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Dell Inc." ), +DMI_MATCH (DMI_PRODUCT_NAME ,"OptiPlex 330" ), + DMI_MATCH(DMI_BOARD_NAME, "0KP561"),
is the board filter really necessary? It might unnecessarily filter out small variations in board names.
Ingo