Skip to contentSkip to conversation

possible variations on building bootable SD card for BBB?

DISCUSSION Robert P. J. Day 3 participants 3 messages Jul 7, 2013 – Jul 8, 2013

lore
Share & tools
lore
#0 lore raw

i'm currently working on (and documenting) the variations for
building a minimal, bootable SD card for the beaglebone black (BBB) for upcoming embedded linux classes, so i'm curious as to what others are doing.

for the last while, i've been using the layers:

* oe-core (naturally)
* meta-oe
* meta-beagleboard

with which i could generate all the appropriate artifacts and manually populate an SD card.

recent perusal suggests that i should be using the "official"
meta-ti layer rather than meta-beagleboard but if i do that and try to populate a formatted SD card the same way, i don't even get to the u-boot prompt.

so -- short form of the question -- how many ways are there to build
a bootable SD card for the BBB using different layers? which are recommended? i'm after just enough of a system to act as the basis for some classes, so i'm currently building just a core-image-minimal, but i'm interested in what others are doing, thanks.

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#1 lore raw
Quoted 20 lines · Robert P. J. Day

i'm currently working on (and documenting) the variations for
building a minimal, bootable SD card for the beaglebone black (BBB) for upcoming embedded linux classes, so i'm curious as to what others are doing.

for the last while, i've been using the layers:

* oe-core (naturally)
* meta-oe
* meta-beagleboard

with which i could generate all the appropriate artifacts and manually populate an SD card.

recent perusal suggests that i should be using the "official"
meta-ti layer rather than meta-beagleboard but if i do that and try to populate a formatted SD card the same way, i don't even get to the u-boot prompt.

Quoted 5 lines

so -- short form of the question -- how many ways are there to build
a bootable SD card for the BBB using different layers? which are recommended? i'm after just enough of a system to act as the basis for some classes, so i'm currently building just a core-image-minimal, but i'm interested in what others are doing, thanks.

I think different methods would be recommended by different people working on different goals. I personally have only built using meta-beagleboard with an Angstrom layer stack, but I understand meta-ti should work as minimal as you've shown as well as with Arago. There was recently a new TI SDK release with Black support.

Quoted 17 lines

rday

--

========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday

========================================================================
_______________________________________________
yocto mailing list
[email protected] <javascript:;>
https://lists.yoctoproject.org/listinfo/yocto

#2 lore raw
In reply to Robert P. J. Day
Quoted 2 lines

so -- short form of the question -- how many ways are there to build
a bootable SD card for the BBB using different layers?

There are many ways to skin a cat. I created my own BeagleBone BSP layer that builds u-boot and a 3.2 kernel. The idea being to demonstrate how to create a BSP layer. The recipes pull the sources from the Arago Project git repository and apply some patches. That may not be necessary anymore because patches for the am33x may be upstreamed to respective projects by now.

Rudi