Skip to contentSkip to conversation

Linux/m68k on the Apollo FPGA softcore?

DISCUSSION Kolbjørn Barmen 3 participants 4 messages Feb 2, 2016 – Feb 5, 2016

lore
Share & tools
lore
#0 lore raw

Hello,

I have been in lurk mode on Linux/m68k the last few years, but still remain quite active in the "Amiga community". The last year or so, a new m68k CPU has emerged, the Apollo core, a softcore for FPGAs from developer Gunnar von Boehn, and the Apollo Team. From what I understand, the core implements a new FPU, not compatible with existing FPUs, and there has been talks about a new MMU implementation too.

I am wondering if any Linux/m68k developers have been in contact with the Apollo Team? Some sort of communication would be nice, a chance to make sure the softcore also works, and works well, for Linux (and *BSD) :)

Information can be found here - http://apollo-core.com

-- kolla

#1 lore raw
Quoted 3 lines · Kolbjørn Barmen

From what I understand, the core implements a new FPU, not compatible with existing FPUs, and there has
been talks about a new MMU implementation too.

Well, that would be too bad given the fact that there is already a huge number of applications and kernels which work with the old FPU/MMU combination.

I'd buy such an accelerator in a heartbeat, but it should be binary compatible with existing 68020+ code.

Adrian

Signature · 4 lines
 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer - [email protected]
`. `'   Freie Universitaet Berlin - [email protected]
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913
#2 lore raw
Quoted 8 lines · John Paul Adrian Glaubitz
Quoted 3 lines · Kolbjørn Barmen

From what I understand, the core implements a new FPU, not compatible with existing FPUs, and there has
been talks about a new MMU implementation too.

Well, that would be too bad given the fact that there is already a huge number of applications and kernels which work with the old FPU/MMU combination.

Sure, but the idea is to move forward from what I understand.

Quoted 2 lines

I'd buy such an accelerator in a heartbeat, but it should be binary compatible with existing 68020+ code.

Apparently it will be usermode compatible with all existing 68k, but not supervisor mode compatible, not MMU compatibale, not FPU compatible. And it is already blazingly fast compared to most 68060 systems, without any optimization done.

I guess it will be an AmigaOS only CPU core :)

-- kolla

#3 lore raw
Quoted 16 lines · Kolbj?rn Barmen
Quoted 8 lines · John Paul Adrian Glaubitz
Quoted 3 lines · Kolbjørn Barmen

From what I understand, the core implements a new FPU, not compatible with existing FPUs, and there has
been talks about a new MMU implementation too.

Well, that would be too bad given the fact that there is already a huge number of applications and kernels which work with the old FPU/MMU combination.

Sure, but the idea is to move forward from what I understand.

Quoted 2 lines

I'd buy such an accelerator in a heartbeat, but it should be binary compatible with existing 68020+ code.

Quoted 6 lines

Apparently it will be usermode compatible with all existing 68k, but not supervisor mode compatible, not MMU compatibale, not FPU compatible. And it is already blazingly fast compared to most 68060 systems, without any optimization done.

I guess it will be an AmigaOS only CPU core :)

From what I read it will replace only the CPU, so you still need the old, fragile Amiga/Atari/Mac hardware around it? It would be great, if this could be included into a minimig or MiST to replace all of the old hardware and allows you to use a readily available USB mouse and keyboard. Then it would be a new system m68k and "somebody" could write a new kernel for this, with drivers for the FPU/MMU, instead of splitting the amiga architecture into two incompatible ones. MiST is working great with AOS, TOS, and I would love to have an m68k machine that can boot off an SD card instead of a floppy disk (until you install some drivers on a IDE or SCSI harddisk since nothing newer is directly supported).

But the nice thing about the FPGA computers is, everybody can write his own core, so we only need to implement the original MMU/FPU in an FPGA ;-)

Christian