Skip to contentSkip to conversation

irq fixes for 4.10

GIT PULL Thomas Gleixner 1 participant 1 message Feb 4, 2017

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

Linus,

please pull the latest irq-urgent-for-linus git tree from:

git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq-urgent-for-linus

This update contains:

- Prevent double activation of interrupt lines, which causes problems on certain interrupt controllers

- Handle the fallout of the above because x86 (ab)uses the activation function to reconfigure interrupts under the hood.

Thanks,

tglx

------------------>
Marc Zyngier (1):
irqdomain: Avoid activating interrupts more than once

Thomas Gleixner (1):
x86/irq: Make irq activate operations symmetric

 arch/x86/kernel/apic/io_apic.c |  2 ++
 arch/x86/kernel/hpet.c         |  1 +
 include/linux/irq.h            | 17 ++++++++++++++++
 kernel/irq/irqdomain.c         | 44 ++++++++++++++++++++++++++++--------------
 4 files changed, 50 insertions(+), 14 deletions(-)
arch/x86/kernel/apic/io_apic.c +2 -0
index 1e35dd06b090..52f352b063fd 100644
@@ -2117,6 +2117,7 @@ static inline void __init check_timer(void)
 			if (idx != -1 && irq_trigger(idx))
 				unmask_ioapic_irq(irq_get_chip_data(0));
 		}
+		irq_domain_deactivate_irq(irq_data);
 		irq_domain_activate_irq(irq_data);
 		if (timer_irq_works()) {
 			if (disable_timer_pin_1 > 0)
@@ -2138,6 +2139,7 @@ static inline void __init check_timer(void)
 		 * legacy devices should be connected to IO APIC #0
 		 */
 		replace_pin_at_irq_node(data, node, apic1, pin1, apic2, pin2);
+		irq_domain_deactivate_irq(irq_data);
 		irq_domain_activate_irq(irq_data);
 		legacy_pic->unmask(0);
 		if (timer_irq_works()) {
arch/x86/kernel/hpet.c +1 -0
index 85e87b46c318..dc6ba5bda9fc 100644
@@ -352,6 +352,7 @@ static int hpet_resume(struct clock_event_device *evt, int timer)
 	} else {
 		struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
 
+		irq_domain_deactivate_irq(irq_get_irq_data(hdev->irq));
 		irq_domain_activate_irq(irq_get_irq_data(hdev->irq));
 		disable_irq(hdev->irq);
 		irq_set_affinity(hdev->irq, cpumask_of(hdev->cpu));
include/linux/irq.h +17 -0
index e79875574b39..39e3254e5769 100644
@@ -184,6 +184,7 @@ struct irq_data {
  *
  * IRQD_TRIGGER_MASK		- Mask for the trigger type bits
  * IRQD_SETAFFINITY_PENDING	- Affinity setting is pending
+ * IRQD_ACTIVATED		- Interrupt has already been activated
  * IRQD_NO_BALANCING		- Balancing disabled for this IRQ
  * IRQD_PER_CPU			- Interrupt is per cpu
  * IRQD_AFFINITY_SET		- Interrupt affinity was set
@@ -202,6 +203,7 @@ struct irq_data {
 enum {
 	IRQD_TRIGGER_MASK		= 0xf,
 	IRQD_SETAFFINITY_PENDING	= (1 <<  8),
+	IRQD_ACTIVATED			= (1 <<  9),
 	IRQD_NO_BALANCING		= (1 << 10),
 	IRQD_PER_CPU			= (1 << 11),
 	IRQD_AFFINITY_SET		= (1 << 12),
@@ -312,6 +314,21 @@ static inline bool irqd_affinity_is_managed(struct irq_data *d)
 	return __irqd_to_state(d) & IRQD_AFFINITY_MANAGED;
 }
 
+static inline bool irqd_is_activated(struct irq_data *d)
+{
+	return __irqd_to_state(d) & IRQD_ACTIVATED;
+}
+
+static inline void irqd_set_activated(struct irq_data *d)
+{
+	__irqd_to_state(d) |= IRQD_ACTIVATED;
+}
+
+static inline void irqd_clr_activated(struct irq_data *d)
+{
+	__irqd_to_state(d) &= ~IRQD_ACTIVATED;
+}
+
 #undef __irqd_to_state
 
 static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
kernel/irq/irqdomain.c +30 -14

62 lines not on this page · raw message