__setup_param(), unique_id and vdso_setup
just going through my outstanding list of kernel cleanup pedantry,
and i was reminded of this from include/linux/init.h:
=====
...
#define __setup(str, fn) \
__setup_param(str, fn, fn, 0)/* NOTE: fn is as per module_param, not __setup! Emits warning if fn
* returns non-zero. */
#define early_param(str, fn) \
__setup_param(str, fn, fn, 1)...
=====
in short, both invocations of __setup_param() use identical second
and third parameters, and a tree-wide grep shows:
$ grep -rw __setup_param *
arch/x86/vdso/vdso32-setup.c:__setup_param("vdso=", vdso32_setup, vdso_setup, 0);
include/linux/init.h:#define __setup_param(str, unique_id, fn, early) \
include/linux/init.h: __setup_param(str, fn, fn, 0)
include/linux/init.h: __setup_param(str, fn, fn, 1)
include/linux/init.h:#define __setup_param(str, unique_id, fn) /* nothing */
$ so apart from that single exception involving "vdso", that macro
could be simplified to just get rid of that third parameter. is there something special about the vdso boot-time parm that *requires* it to be the only boot-time parm in the entire kernel to have a different unique id? just curious. or does that have to be preserved for out-of-tree builds?
rday
--
========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA
Linux Consulting, Training and Annoying Kernel Pedantry.
Web page: http://crashcourse.ca Linked In: http://www.linkedin.com/in/rpjday Twitter: http://twitter.com/rpjday
========================================================================
Quoted 27 lines · Robert P. J. Day
just going through my outstanding list of kernel cleanup pedantry,
and i was reminded of this frominclude/linux/init.h:=====
...#define __setup(str, fn) \ __setup_param(str, fn, fn, 0)/* NOTE: fn is as per
module_param, not__setup! Emits warning if fn
* returns non-zero. */#define early_param(str, fn) \ __setup_param(str, fn, fn, 1)...
=====in short, both invocations of
__setup_param()use identical second
and third parameters, and a tree-wide grep shows:$ grep -rw __setup_param * arch/x86/vdso/vdso32-setup.c:__setup_param("vdso=", vdso32_setup, vdso_setup, 0); include/linux/init.h:#define __setup_param(str, unique_id, fn, early) \ include/linux/init.h: __setup_param(str, fn, fn, 0) include/linux/init.h: __setup_param(str, fn, fn, 1) include/linux/init.h:#define __setup_param(str, unique_id, fn) /* nothing */ $
Quoted 6 lines
so apart from that single exception involving "vdso", that macro
could be simplified to just get rid of that third parameter. is there something special about the vdso boot-time parm that *requires* it to be the only boot-time parm in the entire kernel to have a different unique id? just curious. or does that have to be preserved for out-of-tree builds?
No - so please go ahead and clean it up.
Thanks,
Sam
regarding the sole remaining invocation of __setup_param() in the
entire tree that could possibly be removed, taking the definition of __setup_param() with it:
Quoted 15 lines · Sam Ravnborg
Quoted 14 lines · Robert P. J. Day
...
=====in short, both invocations of
__setup_param()use identical second
and third parameters, and a tree-wide grep shows:$ grep -rw __setup_param * arch/x86/vdso/vdso32-setup.c:__setup_param("vdso=", vdso32_setup, vdso_setup, 0); include/linux/init.h:#define __setup_param(str, unique_id, fn, early) \ include/linux/init.h: __setup_param(str, fn, fn, 0) include/linux/init.h: __setup_param(str, fn, fn, 1) include/linux/init.h:#define __setup_param(str, unique_id, fn) /* nothing */ $
Quoted 8 lines
Quoted 6 lines
so apart from that single exception involving "vdso", that macro
could be simplified to just get rid of that third parameter. is there something special about the vdso boot-time parm that *requires* it to be the only boot-time parm in the entire kernel to have a different unique id? just curious. or does that have to be preserved for out-of-tree builds?No - so please go ahead and clean it up.
i'd be happy to, except i'm not sure how to resolve that last
invocation to no longer use __setup_param(). from arch/x86/vdso/vdso32-setup.c:
=====
...
unsigned int __read_mostly vdso_enabled = VDSO_DEFAULT;
static int __init vdso_setup(char *s)
{
vdso_enabled = simple_strtoul(s, NULL, 0);
return 1;
}/*
* For consistency, the argument vdso32=[012] affects the 32-bit vDSO
* behavior on both 64-bit and 32-bit kernels.
* On 32-bit kernels, vdso=[012] means the same thing.
*/__setup("vdso32=", vdso_setup);
#ifdef CONFIG_X86_32__setup_param("vdso=", vdso32_setup, vdso_setup, 0);
EXPORT_SYMBOL_GPL(vdso_enabled);
#endif
...
=====
if someone wants to resolve that file to remove the use of__setup_param(), this cleanup should be done in two steps, anyway. first, get rid of that final invocation, followed by removing the definition from moduleparam.h. suggestions?
rday
p.s. there are only three architectures that appear to support a boot-time parm of vdso (or some equivalent):
$ grep -rw __setup * | grep vdso
arch/sh/kernel/vsyscall/vsyscall.c:__setup("vdso=", vdso_setup);
arch/x86/vdso/vdso32-setup.c:__setup("vdso32=", vdso_setup);
arch/x86/vdso/vma.c:__setup("vdso=", vdso_setup);
arch/s390/kernel/vdso.c:__setup("vdso=", vdso_setup);
$ that doesn't quite match with what one finds inDocumentation/kernel-parameters.txt:
vdso= [X86,SH]
vdso=2: enable compat VDSO (default with COMPAT_VDSO) vdso=1: enable VDSO (default)
vdso=0: disable VDSO mapping
vdso32= [X86]
vdso32=2: enable compat VDSO (default with COMPAT_VDSO) vdso32=1: enable 32-bit VDSO (default) vdso32=0: disable 32-bit VDSO mapping
just an observation.
--
========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA
Linux Consulting, Training and Annoying Kernel Pedantry.
Web page: http://crashcourse.ca Linked In: http://www.linkedin.com/in/rpjday Twitter: http://twitter.com/rpjday
========================================================================