Linux 2.6.31-rc1
We've had the regular two-week (and one day) merge window, and -rc1 is out, and the merge window is closed.
[ I suspect I'll still merge the SCore architecture, I wanted to give it a
quick peek, but I've been busy with all the other patches so I'm closing the merge window now, but leaving myself the option of merging Score later - last I looked, the only non-SCore file it touched was the MAINTAINERS file, so it's not like it should break anything else ]
There's a lot in there, but let me say that as far as the whole merge window has gone, I've seldom felt happier merging stuff from people. I'm really hoping it isn't just a fluke, but people kept their git trees clean, and while there were a couple of times that I said "no, I'm not going to merge that", on the whole this was a really painless merge window for me.
I'm not saying that it was necessarily less bug-free than usual, I'm just saying that on the whole people sent me merge requests that made sense, explained what they did, and when I pulled I saw clear development lines. That just makes it much easier for me.
So thanks to everybody involved.
I hope that doesn't mean that it was really painful for others, or that we'll be chasing down more bugs than usual. And I _really_ hope we can keep things going this way, and it wasn't a one-off "things just happened to work this time".
As to the actual changes - too many to list. As usual, the bulk of the changes are to drivers (70% of the diffs), with drivers/staging being the bulk of that (about 60% of all driver changes - 40% of the total). But wonder of wonder, I think drivers/staging actually _shrank_ this time around, alledgely due to cleanups. Believe that who will.
On the filesystem front, we had btrfs, ext3 and xfs getting active development (Why xfs? Beats me, but that's what the stats say), and a fair chunk of work on the whole fsnotify unification work. And the VFS layer got some TLC wrt ACL and private namespace handling.
On architectures: ARM, powerpc, mips, sh, x86 are the bulk of it. On ARM, the bulk is new platforms (u300, freescale stmp, whatever), there seems to be no end to crazy new arm platforms. On x86 (and at least some degree on powerpc), a noticeable part is the whole new perf-counter subsystem. Along with lots and lots of other stuff.
On the whole? Tons of stuff. Let's start testign and stabilizing.
Linus
PATCH 1/1 i2c: fix build bug in i2c-designware.c
Find below a minor build fix for a new ARM-only driver.
Ingo
--------------->
Quoted 1 line
From
8bf467c9f4591f77e1d69bd78fb6cc4f1ff387f8Mon Sep 17 00:00:00 2001
From: Ingo Molnar <[email protected]>
Date: Thu, 25 Jun 2009 08:27:14 +0200
Subject: [PATCH] i2c: fix build bug in i2c-designware.c
This build error triggers on x86:
drivers/built-in.o: In function `i2c_dw_init':
i2c-designware.c:(.text+0x4e37ca): undefined reference to clk_get_rate' drivers/built-in.o: In function dw_i2c_probe':
i2c-designware.c:(.devinit.text+0x51f5e): undefined reference to clk_get' i2c-designware.c:(.devinit.text+0x51f76): undefined reference to clk_enable' i2c-designware.c:(.devinit.text+0x520ff): undefined reference to clk_disable' i2c-designware.c:(.devinit.text+0x52108): undefined reference to clk_put'
Because this new driver uses the clk_*() facilities which is an ARM-only thing currently.
--- drivers/i2c/busses/Kconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/i2c/busses/Kconfig +1 -0
@@ -334,6 +334,7 @@ config I2C_DAVINCI config I2C_DESIGNWARE tristate "Synopsys DesignWare" + depends on HAVE_CLK help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported.
Re: [PATCH] i2c: fix build bug in i2c-designware.c
Quoted 34 lines · Ingo Molnar
Find below a minor build fix for a new ARM-only driver.
Ingo
--------------->
Quoted 1 line
From
8bf467c9f4591f77e1d69bd78fb6cc4f1ff387f8Mon Sep 17 00:00:00 2001From: Ingo Molnar <[email protected]>
Date: Thu, 25 Jun 2009 08:27:14 +0200
Subject: [PATCH] i2c: fix build bug ini2c-designware.cThis build error triggers on x86:
drivers/built-in.o: In function `i2c_dw_init':
i2c-designware.c:(.text+0x4e37ca): undefined reference toclk_get_rate' drivers/built-in.o: In functiondw_i2c_probe':
i2c-designware.c:(.devinit.text+0x51f5e): undefined reference toclk_get' i2c-designware.c:(.devinit.text+0x51f76): undefined reference toclk_enable' i2c-designware.c:(.devinit.text+0x520ff): undefined reference toclk_disable' i2c-designware.c:(.devinit.text+0x52108): undefined reference toclk_put'Because this new driver uses the clk_*() facilities which is an ARM-only thing currently.
Signed-off-by Ingo Molnar <[email protected]>--- drivers/i2c/busses/Kconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)drivers/i2c/busses/Kconfig +0
-0
drivers/i2c/busses/Kconfig config I2C_DAVINCI · line 340
Quoted 7 lines
drivers/i2c/busses/Kconfig +1
-0@@ -334,6 +334,7 @@ config I2C_DAVINCI config I2C_DESIGNWARE tristate "Synopsys DesignWare" + depends on HAVE_CLK help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported.
thanks, missed there not being a 'depends on' line...
Baurch - can you submit a patch to declare which ARM architectures that this runs on, or whether Ingo's dependency on HAVE_CLK is the fix to merge?
Signature · 4 lines
Ben Q: What's a light-year? A: One-third less calories than a regular year.
Re: [PATCH] i2c: fix build bug in i2c-designware.c
Hi Ben,
Quoted 39 lines · Ben Dooks
Quoted 28 lines · Ingo Molnar
Quoted 1 line
From
8bf467c9f4591f77e1d69bd78fb6cc4f1ff387f8Mon Sep 17 00:00:00 2001From: Ingo Molnar <[email protected]>
Date: Thu, 25 Jun 2009 08:27:14 +0200
Subject: [PATCH] i2c: fix build bug ini2c-designware.cThis build error triggers on x86:
drivers/built-in.o: In function `i2c_dw_init':
i2c-designware.c:(.text+0x4e37ca): undefined reference toclk_get_rate' drivers/built-in.o: In functiondw_i2c_probe':
i2c-designware.c:(.devinit.text+0x51f5e): undefined reference toclk_get' i2c-designware.c:(.devinit.text+0x51f76): undefined reference toclk_enable' i2c-designware.c:(.devinit.text+0x520ff): undefined reference toclk_disable' i2c-designware.c:(.devinit.text+0x52108): undefined reference toclk_put'Because this new driver uses the clk_*() facilities which is an ARM-only thing currently.
Signed-off-by Ingo Molnar <[email protected]>--- drivers/i2c/busses/Kconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)drivers/i2c/busses/Kconfig +0
-0drivers/i2c/busses/Kconfig config I2C_DAVINCI · line 340
Quoted 7 lines
drivers/i2c/busses/Kconfig +1
-0@@ -334,6 +334,7 @@ config I2C_DAVINCI config I2C_DESIGNWARE tristate "Synopsys DesignWare" + depends on HAVE_CLK help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported.thanks, missed there not being a 'depends on' line...
Quoted 2 lines
Baurch - can you submit a patch to declare which ARM architectures that this runs on, or whether Ingo's dependency on
HAVE_CLKis the fix to merge?
Ingo's fix should be enough.
baruch
Signature · 3 lines
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- [email protected] - tel: +972.2.679.5364, http://www.tkos.co.il -Hi!
Quoted 3 lines
On architectures: ARM, powerpc, mips, sh, x86 are the bulk of it. On ARM, the bulk is new platforms (u300, freescale stmp, whatever), there seems to be no end to crazy new arm platforms. On x86 (and at least some degree on
HW vendors on arm seem to produce all the new, incompatible devices, all the time :-(. Arm vendors seem to multiply, and compatibility seems to be very low on their list of priorities... and it is only getting worse.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html