kvm tool: Implement a serial FIFO emulation
PATCH 1/1 kvm tool: Implement a serial FIFO emulation
Adding FIFO functionality to the serial emulator to speed up the console handling.
This also restricts sysrq functionality to the first serial port and fixes the sysrq injection, which was broken because nothing ever reset the BI status bit in the LSR.
Signed-off-by Thomas Gleixner <[email protected]>
--- tools/kvm/hw/serial.c | 124 ++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 90 insertions(+), 34 deletions(-)
tools/kvm/hw/serial.c +109 -52
@@ -12,6 +12,15 @@#include <pthread.h> +/* +* This fakes a U6_16550A. The fifo len needs to be 64 as the kernel +* expects that for autodetection. +*/ +#define FIFO_LEN 64 +#define FIFO_MASK (FIFO_LEN - 1) + +#define UART_IIR_TYPE_BITS 0xc0 +struct serial8250_device {pthread_mutex_t mutex;u8 id;
@@ -20,8 +29,11 @@ struct serial8250_device {u8 irq;u8 irq_state;int txcnt; +int rxcnt; +int rxdone; +char txbuf[FIFO_LEN ]; +char rxbuf[FIFO_LEN ]; -u8 rbr;/* receive buffer */ u8 dll;u8 dlm;u8 iir;
@@ -83,10 +95,34 @@ static struct serial8250_device devices[ }, }; +static void serial8250_flush_tx (struct serial8250_device *dev) +{ + dev->lsr |=UART_LSR_TEMT |UART_LSR_THRE ; + +if (dev->txcnt) { +term_putc (CONSOLE_8250 , dev->txbuf, dev->txcnt, dev->id); + dev->txcnt =0 ; + } +} +static void serial8250_update_irq (struct kvm *kvm,struct serial8250_device *dev) {u8 iir =0 ; +/* Handle clear rx */ +if (dev->lcr &UART_FCR_CLEAR_RCVR ) { + dev->lcr &= ~UART_FCR_CLEAR_RCVR ; + dev->rxcnt = dev->rxdone =0 ; + dev->lsr &= ~UART_LSR_DR ; + } + +/* Handle clear tx */ +if (dev->lcr &UART_FCR_CLEAR_XMIT ) { + dev->lcr &= ~UART_FCR_CLEAR_XMIT ; + dev->txcnt =0 ; + dev->lsr |=UART_LSR_TEMT |UART_LSR_THRE ; + } +/* Data ready and rcv interrupt enabled ? */ if ((dev->ier &UART_IER_RDI ) && (dev->lsr &UART_LSR_DR )) iir |=UART_IIR_RDI ;
@@ -112,66 +148,57 @@ static void serial8250_update_irq(struct* is nothing more to transmit, so we can reset our tx logic * here. */ -if (!(dev->ier &UART_IER_THRI )) { - dev->lsr |=UART_LSR_TEMT |UART_LSR_THRE ; - dev->txcnt =0 ; - } +if (!(dev->ier &UART_IER_THRI )) +serial8250_flush_tx (dev); }#define SYSRQ_PENDING_NONE 0#define SYSRQ_PENDING_BREAK 1 -#define SYSRQ_PENDING_CMD 2static int sysrq_pending;static void serial8250__sysrq (struct kvm *kvm,struct serial8250_device *dev) { -switch (sysrq_pending) { -case SYSRQ_PENDING_BREAK : - dev->lsr |=UART_LSR_DR |UART_LSR_BI ; - - sysrq_pending =SYSRQ_PENDING_CMD ; -break ; -case SYSRQ_PENDING_CMD : - dev->rbr ='p' ; - dev->lsr |=UART_LSR_DR ; - - sysrq_pending =SYSRQ_PENDING_NONE ; -break ; - } + dev->lsr |=UART_LSR_DR |UART_LSR_BI ; + dev->rxbuf[dev->rxcnt++] ='p' ; + sysrq_pending =SYSRQ_PENDING_NONE ; } -static void serial8250__receive (struct kvm *kvm,struct serial8250_device *dev) +static void serial8250__receive (struct kvm *kvm,struct serial8250_device *dev, +bool handle_sysrq) {int c;/* -* If the guest transmitted 16 chars in a row, we clear the +* If the guest transmitted a full fifo, we clear the * TEMT/THRE bits to let the kernel escape from the 8250 * interrupt handler. We come here only once a ms, so that -* should give the kernel the desired pause. +* should give the kernel the desired pause. That also flushes +* the tx fifo to the terminal. */ - dev->lsr |=UART_LSR_TEMT |UART_LSR_THRE ; - dev->txcnt =0 ; +serial8250_flush_tx (dev); -if (dev->lsr &UART_LSR_DR ) +if (dev->mcr &UART_MCR_LOOP )return ; -if (sysrq_pending) { -serial8250__sysrq (kvm, dev); +if ((dev->lsr &UART_LSR_DR ) || dev->rxcnt)return ; - } -if (!term_readable (CONSOLE_8250 , dev->id)) +if (handle_sysrq && sysrq_pending) { +serial8250__sysrq (kvm, dev);return ; + } - c =term_getc (CONSOLE_8250 , dev->id); +while (term_readable (CONSOLE_8250 , dev->id) && + dev->rxcnt <FIFO_LEN ) { -if (c <0 ) -return ; + c =term_getc (CONSOLE_8250 , dev->id); - dev->rbr = c; - dev->lsr |=UART_LSR_DR ; +if (c <0 ) +break ; + dev->rxbuf[dev->rxcnt++] = c; + dev->lsr |=UART_LSR_DR ; + } }void serial8250__update_consoles (struct kvm *kvm)
@@ -183,7 +210,8 @@ void serial8250__update_consoles(structmutex_lock (&dev->mutex); -serial8250__receive (kvm, dev); +/* Restrict sysrq injection to the first port */ +serial8250__receive (kvm, dev, i ==0 );serial8250_update_irq (kvm, dev);
@@ -209,11 +237,13 @@ static struct serial8250_device *find_dereturn NULL ; } -static bool serial8250_out (struct ioport *ioport,struct kvm *kvm,u16 port,void *data,int size) +static bool serial8250_out (struct ioport *ioport,struct kvm *kvm,u16 port, +void *data,int size) {struct serial8250_device *dev;u16 offset;bool ret = true; +char *addr = data; dev =find_device (port);if (!dev)
@@ -225,23 +255,33 @@ static bool serial8250_out(struct ioportswitch (offset) {case UART_TX : -if (!(dev->lcr &UART_LCR_DLAB )) { -char *addr = data; - -if (!(dev->mcr &UART_MCR_LOOP )) -term_putc (CONSOLE_8250 , addr, size, dev->id); -/* else FIXME: Inject data into rcv path for LOOP */ +if (dev->lcr &UART_LCR_DLAB ) { + dev->dll =ioport__read8 (data); +break ; + } -if (++dev->txcnt ==16 ) - dev->lsr &= ~(UART_LSR_TEMT |UART_LSR_THRE ); +/* Loopback mode */ +if (dev->mcr &UART_MCR_LOOP ) { +if (dev->rxcnt <FIFO_LEN ) { + dev->rxbuf[dev->rxcnt++] = *addr; + dev->lsr |=UART_LSR_DR ; + }break ; + } + +if (dev->txcnt <FIFO_LEN ) { + dev->txbuf[dev->txcnt++] = *addr; + dev->lsr &= ~UART_LSR_TEMT ; +if (dev->txcnt ==FIFO_LEN /2 ) + dev->lsr &= ~UART_LSR_THRE ; }else { - dev->dll =ioport__read8 (data); +/* Should never happpen */ + dev->lsr &= ~(UART_LSR_TEMT |UART_LSR_THRE ); }break ;case UART_IER :if (!(dev->lcr &UART_LCR_DLAB )) - dev->ier =ioport__read8 (data) &0x3f ; + dev->ier =ioport__read8 (data) &0x0f ;else dev->dlm =ioport__read8 (data);break ;
@@ -275,6 +315,25 @@ static bool serial8250_out(struct ioportreturn ret; } +static void serial8250_rx (struct serial8250_device *dev,void *data) +{ +if (dev->rxdone == dev->rxcnt) +return ; + +/* Break issued ? */ +if (dev->lsr &UART_LSR_BI ) { + dev->lsr &= ~UART_LSR_BI ; +ioport__write8 (data,0 ); +return ; + } + +ioport__write8 (data, dev->rxbuf[dev->rxdone++]); +if (dev->rxcnt == dev->rxdone) { + dev->lsr &= ~UART_LSR_DR ; + dev->rxcnt = dev->rxdone =0 ; + } +} +static bool serial8250_in (struct ioport *ioport,struct kvm *kvm,u16 port,void *data,int size) {struct serial8250_device *dev;
@@ -291,12 +350,10 @@ static bool serial8250_in(struct ioportswitch (offset) {case UART_RX : -if (dev->lcr &UART_LCR_DLAB ) { +if (dev->lcr &UART_LCR_DLAB )ioport__write8 (data, dev->dll); - }else { -ioport__write8 (data, dev->rbr); - dev->lsr &= ~UART_LSR_DR ; - } +else +serial8250_rx (dev, data);break ;case UART_IER :if (dev->lcr &UART_LCR_DLAB )
@@ -305,7 +362,7 @@ static bool serial8250_in(struct ioportioport__write8 (data, dev->ier);break ;case UART_IIR : -ioport__write8 (data, dev->iir); +ioport__write8 (data, dev->iir |UART_IIR_TYPE_BITS );break ;case UART_LCR :ioport__write8 (data, dev->lcr);
Pekka Enberg
AppliedQuoted 8 lines · Thomas Gleixner
Adding FIFO functionality to the serial emulator to speed up the console handling.
This also restricts sysrq functionality to the first serial port and fixes the sysrq injection, which was broken because nothing ever reset the BI status bit in the LSR.
Signed-off-by Thomas Gleixner <[email protected]>
Applied, thanks! Ingo, this speeds up serial console significantly and hopefully fixes things up for you as well.
Pekka