how many variations to build for a beaglebone black (BBB)?
i want to build a bootable system for a BBB, and i can see at least
three possibilities:
1) the meta-yocto-bsp layer defines the beaglebone as one of its reference boards
2) the "meta-ti" layer is advertised as "official" TI board support
3) there is a "meta-beagleboard" layer, but that one looks a bit stagnant
any preferences out there for people working with the BBB?
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================Quoted 7 lines · Robert P. J. Day
i want to build a bootable system for a BBB, and i can see at least
three possibilities:1) the meta-yocto-bsp layer defines the beaglebone as one of its reference boards
Quoted 6 lines
2) the "meta-ti" layer is advertised as "official" TI board support
3) there is a "meta-beagleboard" layer, but that one looks a bit stagnant
any preferences out there for people working with the BBB?
The generic "it depends" answer applies here.
Due to the efforts of TI,the core BBB support made it into the mainline kernel for 3.14, so that forms a common baseline of feature support.
Outside of that, it depends on the functionality you need in the image and your familiarity with integration of multiple layers and features.
meta-ti gets you the latest and greatest features and support, while the reference BSP was also done by TI to provide a good baseline level of support (graphics, usb, ethernet, etc) and is supported via Wind River in the linux-yocto repository.
Cheers,
Bruce
Quoted 3 lines
rday
Quoted 21 lines · Bruce Ashfield
Quoted 7 lines · Robert P. J. Day
i want to build a bootable system for a BBB, and i can see at least
three possibilities:1) the meta-yocto-bsp layer defines the beaglebone as one of its reference boards
Quoted 6 lines
2) the "meta-ti" layer is advertised as "official" TI board support
3) there is a "meta-beagleboard" layer, but that one looks a bit stagnant
any preferences out there for people working with the BBB?
The generic "it depends" answer applies here.
Due to the efforts of TI,the core BBB support made it into the mainline kernel for 3.14, so that forms a common baseline of feature support.
Quoted 8 lines
Outside of that, it depends on the functionality you need in the image and your familiarity with integration of multiple layers and features.
meta-ti gets you the latest and greatest features and support, while the reference BSP was also done by TI to provide a good baseline level of support (graphics, usb, ethernet, etc) and is supported via Wind River in the linux-yocto repository.
excellent. since i want to configure and build for a classroom
environment and probably don't need bleeding edge, i'll stick with the yocto-bsp stuff, which has served me well thus far.
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================Quoted 27 lines · Robert P. J. Day
Quoted 25 lines · Bruce Ashfield
Quoted 7 lines · Robert P. J. Day
i want to build a bootable system for a BBB, and i can see at least
three possibilities:1) the meta-yocto-bsp layer defines the beaglebone as one of its reference boards
Quoted 6 lines
2) the "meta-ti" layer is advertised as "official" TI board support
3) there is a "meta-beagleboard" layer, but that one looks a bit stagnant
any preferences out there for people working with the BBB?
The generic "it depends" answer applies here.
Due to the efforts of TI,the core BBB support made it into the mainline kernel for 3.14, so that forms a common baseline of feature support.
Outside of that, it depends on the functionality you need in the image and your familiarity with integration of multiple layers and features.
Quoted 8 lines
Quoted 4 lines
meta-ti gets you the latest and greatest features and support, while the reference BSP was also done by TI to provide a good baseline level of support (graphics, usb, ethernet, etc) and is supported via Wind River in the linux-yocto repository.
excellent. since i want to configure and build for a classroom
environment and probably don't need bleeding edge, i'll stick with the yocto-bsp stuff, which has served me well thus far.
The big thing missing from this version(*) is no cape support, so if you need an LCD display or CAN driver or ..., you're not going to find it. The meta-ti version does support those AFAIK
(*) unless this changed in the last three weeks while I was on holiday :-)
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Gary,
Quoted 6 lines · Gary Thomas
The big thing missing from this
version(*)is no cape support, so if you need an LCD display or CAN driver or ..., you're not going to find it. The meta-ti version does support those AFAIK(*) unless this changed in the last three weeks while I was on holiday :-)
meta-ti does not have support for cape manager. Just meta-beagleboard included it for kernel 3.8.
Regards,
--
*dS
Diego Sueiro
Administrador do Embarcados
www.embarcados.com.br
<http://www.embarcados.com.br/?utm_source=assinatura_diego&utm_medium=e-mail&utm_campaign=Assinatura%20Email%20Diego>
/*long live rock 'n roll*/