is there a list of yocto-supported dev kits somewhere?
perhaps i just haven't noticed, but is there somewhere a list of dev
kits that have a yocto project build for them? it would be great to have a reference list along the lines of, "boards for which there is a working YB build", with link(s) to relevant layer and instructions, etc.
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================2014-08-28 9:38 GMT+02:00 Robert P. J. Day <[email protected]>:
Quoted 9 lines
perhaps i just haven't noticed, but is there somewhere a list of dev
kits that have a yocto project build for them? it would be great to have a reference list along the lines of, "boards for which there is a working YB build", with link(s) to relevant layer and instructions, etc.rday
Hi,
for the sake of completeness the layerindex [1] has a list of machines that are eventually supported.
Although it lacks information about issues / supported features of these machines.
[1] http://layers.openembedded.org/layerindex/branch/master/machines/?q=
Signature · 2 lines
Regards Samuel
Quoted 13 lines · Samuel Stirtzel
2014-08-28 9:38 GMT+02:00 Robert P. J. Day <[email protected]>:
Quoted 9 lines
perhaps i just haven't noticed, but is there somewhere a list of dev
kits that have a yocto project build for them? it would be great to have a reference list along the lines of, "boards for which there is a working YB build", with link(s) to relevant layer and instructions, etc.rday
Hi,
Quoted 7 lines
for the sake of completeness the layerindex [1] has a list of machines that are eventually supported.
Although it lacks information about issues / supported features of these machines.[1] http://layers.openembedded.org/layerindex/branch/master/machines/?q=
ah, yes, that's what i was looking for, not sure why i'd never seen
that before, thanks.
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================I think the machines list is a great start, but it really lists actual machines, not dev kits. There isn't any way to see immediately from that list which are $99 dev boards and which are $9999 reference kits from the manufacturers. I think Robert is right that a list of inexpensive YP-supported boards would be extremely useful. I'll try to create such a list in the near future.
Quoted 43 lines · Robert P. J. Day
Quoted 13 lines · Samuel Stirtzel
2014-08-28 9:38 GMT+02:00 Robert P. J. Day <[email protected]>:
Quoted 9 lines
perhaps i just haven't noticed, but is there somewhere a list of dev
kits that have a yocto project build for them? it would be great to have a reference list along the lines of, "boards for which there is a working YB build", with link(s) to relevant layer and instructions, etc.rday
Hi,
Quoted 7 lines
for the sake of completeness the layerindex [1] has a list of machines that are eventually supported.
Although it lacks information about issues / supported features of these machines.[1] http://layers.openembedded.org/layerindex/branch/master/machines/?q=
ah, yes, that's what i was looking for, not sure why i'd never seen
that before, thanks.rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.caTwitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday========================================================================
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 2 lines
Jeff Osier-Mixon @Intel Yocto Project Community Manager http://yoctoproject.org
Quoted 1 line · Jeff Osier-Mixon
I think the machines list is a great start,
http://layers.openembedded.org/layerindex/branch/master/machines/?q=
Quoted 6 lines
but it really lists actual machines, not dev kits. There isn't any way to see immediately from that list which are $99 dev boards and which are $9999 reference kits from the manufacturers. I think Robert is right that a list of inexpensive YP-supported boards would be extremely useful. I'll try to create such a list in the near future.
that is kinda what i was after. i realize it's an open-ended
request, but it would be great if there was a list of "recommended" dev kits representing various architectures/processors that people new to YP could purchase for experimentation, *knowing* that those dev kits had a YP build that would work out of the box. not necessarily technically complete, but that it would just boot and let them start playing.
and as i once suggested (and jefro clearly appreciates), at this
point, dev kits like that should rarely cost more than a couple hundred dollars.
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================I think this is a great idea and I volunteer to help with the effort.
Quoted 8 lines
that is kinda what i was after. i realize it's an open-ended
request, but it would be great if there was a list of "recommended" dev kits representing various architectures/processors that people new to YP could purchase for experimentation, *knowing* that those dev kits had a YP build that would work out of the box. not necessarily technically complete, but that it would just boot and let them start playing.
The "work out of the box" part is the tricky one. Unfortunately, many YP BSP layers do not include instructions on what to do after the build has completed. If you don't know what to do with boot loader and kernel images, flattened device tree files, root file system archives and images then you are at a loss. Commonly the boards also require a special boot media partitioning and the like.
While this type of info should be in the BSP readme files I think it would be good to have step by step instructions that gets one from setting up the build environment to building and creating bootable media for each board.
Cheers,
Rudi
Quoted 10 lines · Rudolf Streif
I think this is a great idea and I volunteer to help with the effort.
that is kinda what i was after. i realize it's an open-ended request, but it would be great if there was a list of "recommended" dev kits representing various architectures/processors that people new to YP could purchase for experimentation, *knowing* that those dev kits had a YP build that would work out of the box. not necessarily technically complete, but that it would just boot and let them start playing.
Quoted 6 lines
The "work out of the box" part is the tricky one. Unfortunately, many YP BSP layers do not include instructions on what to do after the build has completed. If you don't know what to do with boot loader and kernel images, flattened device tree files, root file system archives and images then you are at a loss. Commonly the boards also require a special boot media partitioning and the like.
exactly true, but without that final bit of information, i contend
that the YP build is utterly useless unless the developer is told what to do with the final image objects.
Quoted 4 lines
While this type of info should be in the BSP readme files I think it would be good to have step by step instructions that gets one from setting up the build environment to building and creating bootable media for each board.
and those step-by-step instructions don't need to be terribly
verbose. remember, you're not trying to explain how to use YP; you're simply summarizing what it takes to get it running on a particular dev kit. all of that should fit on a single page at most.
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================Am 29.08.2014 18:01, schrieb Robert P. J. Day:
Quoted 28 lines · Rudolf Streif
Quoted 11 lines
I think this is a great idea and I volunteer to help with the effort.
that is kinda what i was after. i realize it's an open-ended
request, but it would be great if there was a list of "recommended" dev kits representing various architectures/processors that people new to YP could purchase for experimentation, *knowing* that those dev kits had a YP build that would work out of the box. not necessarily technically complete, but that it would just boot and let them start playing.Quoted 6 lines
The "work out of the box" part is the tricky one. Unfortunately, many YP BSP layers do not include instructions on what to do after the build has completed. If you don't know what to do with boot loader and kernel images, flattened device tree files, root file system archives and images then you are at a loss. Commonly the boards also require a special boot media partitioning and the like.
exactly true, but without that final bit of information, i contend
that the YP build is utterly useless unless the developer is told what to do with the final image objects.Quoted 4 lines
While this type of info should be in the BSP readme files I think it would be good to have step by step instructions that gets one from setting up the build environment to building and creating bootable media for each board.
Quoted 5 lines
and those step-by-step instructions don't need to be terribly
verbose. remember, you're not trying to explain how to use YP; you're simply summarizing what it takes to get it running on a particular dev kit. all of that should fit on a single page at most.
Robert Nelson has a good collection for ARM-Devkits in his eewiki:
https://eewiki.net/display/linuxonarm/Home Maybe that could be a good starting point.
Quoted 4 lines
rday
Quoted 3 lines · Sven Ebenfeld
Robert Nelson has a good collection for ARM-Devkits in his eewiki:
https://eewiki.net/display/linuxonarm/Home Maybe that could be a good starting point.
i agree, but i certainly don't think one needs to include *all* of
the kits robert is currently supporting, just the current ones. for example, given the existence of the beaglebone black, i see no pressing need to similarly document the earlier beaglebone (white) or the beagleboard (unless one really, really, really wants to). after all, if someone wants to get into YP and is looking for a starter dev kit, the BBB would be the obvious preference over any of the earlier beagle models.
perhaps the various maintainers of the various layers can decide
which affordable dev kit would be a good representative for their offerings. for intel, the minnowboard [max] would be a good candidate and so on. the freescale folks could pick one or two -- the wandboard seems a good choice here. others:
* altera rocketboards:
http://www.rocketboards.org/foswiki/Documentation/GSRDGettingStartedYoctoCopyArrowSoCKitEdition
* xilinx zynq:
http://www.wiki.xilinx.com/Yocto
most of this stuff seems to be out there and working, it just needs
to be put into a simple list somewhere.
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
======================================================================== took only a few minutes, here's my first pass at a short list of
affordable and YP-compatible(?) dev kits:
http://www.crashcourse.ca/wiki/index.php/Yocto_Project_dev_kits
not trying to be complete, just the ones i could think of off the top of my head that represent some variety. thoughts? perhaps the intel and freescale people could suggest other possibilities.
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================Robert,
Atmel has their own board support layer that they have not submitted as an official Yocto Project BSP. Their layer supports their AT91SAM9x5-EK series and their SAMA5D3 series evaluation kits. I've been using their AT91SAM9G25-EK kit for my reference design. Since Atmel doesn't have a BSP that is officially supported by the Yocto Project, I'm not sure whether it belongs with your list or not.
Regards,
Bryan
Quoted 37 lines
-----Original Message-----
From: [email protected] [mailto:yocto- [email protected]] On Behalf Of Robert P. J. Day
Sent: Saturday, August 30, 2014 6:14 AM
To: Sven Ebenfeld
Cc: [email protected]
Subject: Re: [yocto] is there a list of yocto-supported dev kits somewhere?took only a few minutes, here's my first pass at a short list of affordable and
YP-compatible(?) dev kits:http://www.crashcourse.ca/wiki/index.php/Yocto_Project_dev_kits
not trying to be complete, just the ones i could think of off the top of my head that represent some variety. thoughts? perhaps the intel and freescale people could suggest other possibilities.
rday
--
==========================================================
==============
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.caTwitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday==========================================================
==============--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 9 lines · Bryan Evenson
Robert,
Atmel has their own board support layer that they have not submitted as an official Yocto Project BSP. Their layer supports their AT91SAM9x5-EK series and their SAMA5D3 series evaluation kits. I've been using their AT91SAM9G25-EK kit for my reference design. Since Atmel doesn't have a BSP that is officially supported by the Yocto Project, I'm not sure whether it belongs with your list or not.
sorry for the delay, was embedded (pun intended :-) in another
project. i don't think it's necessary for a layer to be an "official" yocto layer, so much as it just needs to work out of the box for a dev kit.
so if you've used this layer and it works just fine, i'll add it to
my list. just point me at the relevant info.
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================Robert,
I'm copying Nicolas Ferre from Atmel, the main maintainer of their meta layer, in case anything I say needs correction.
Quoted 18 lines
-----Original Message-----
From: Robert P. J. Day [mailto:[email protected]]
Sent: Tuesday, September 09, 2014 5:37 AM
To: Bryan Evenson
Cc: Sven Ebenfeld; [email protected]
Subject: RE: [yocto] is there a list of yocto-supported dev kits somewhere?Quoted 8 lines · Bryan Evenson
Robert,
Atmel has their own board support layer that they have not submitted as an official Yocto Project BSP. Their layer supports their AT91SAM9x5-EK series and their SAMA5D3 series evaluation kits. I've been using their AT91SAM9G25-EK kit for my reference design. Since Atmel doesn't have a BSP that is officially supported by the Yocto Project, I'm not sure whether it belongs with your list or not.
Quoted 7 lines
sorry for the delay, was embedded (pun intended :-) in another project. i
don't think it's necessary for a layer to be an "official" yocto layer, so much as it just needs to work out of the box for a dev kit.so if you've used this layer and it works just fine, i'll add it to my list. just
point me at the relevant info.
Atmel's layer is at https://github.com/linux4sam/meta-atmel. Their main support wiki is located at http://www.at91.com/linux4sam/bin/view/Linux4SAM/, with the Yocto-specific material located at http://www.at91.com/linux4sam/bin/view/Linux4SAM/YoctoProject. Let me know if you were looking for some more information for this list
Regards,
Bryan
Quoted 13 lines
rday
--
==========================================================
==============
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.caTwitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday==========================================================
==============