Skip to contentSkip to conversation

XT-PIC-XT-PIC in /proc/interrupts on x86

DISCUSSION Maciej W. Rozycki 1 participant 1 message Sep 25, 2014

lore
Share & tools
lore
#0 lore raw

Hi,

Is there a specific purpose we print "XT-PIC" for twice in
/proc/interrupts these days on x86 (and maybe other) systems, e.g.:

CPU0

  0:     860089    XT-PIC-XT-PIC    timer
  1:       7165    XT-PIC-XT-PIC    i8042
  2:          0    XT-PIC-XT-PIC    cascade
  3:          6    XT-PIC-XT-PIC    serial
  4:         10    XT-PIC-XT-PIC    serial
  6:          3    XT-PIC-XT-PIC    floppy
  8:          0    XT-PIC-XT-PIC    rtc0
 12:        178    XT-PIC-XT-PIC    eth0
 14:      37128    XT-PIC-XT-PIC    ide0
 15:          0    XT-PIC-XT-PIC    ide1
NMI:          0   Non-maskable interrupts
ERR:          0

? This looks weird to me and is almost surely an artefact of code we have in `show_interrupts' in kernel/irq/proc.c:

	if (desc->irq_data.chip) {
		if (desc->irq_data.chip->irq_print_chip)
			desc->irq_data.chip->irq_print_chip(&desc->irq_data, p);
		else if (desc->irq_data.chip->name)
			seq_printf(p, " %8s", desc->irq_data.chip->name);
[...]
	if (desc->name)
		seq_printf(p, "-%-8s", desc->name);

with desc->irq_data.chip->name' and desc->name' both being "XT-PIC".

Wouldn't it make sense to set the latter to NULL if it was to be the same
as the former? I'll make a patch to implement it unless I hear a valid argument to the contrary. It's redundant information after all, and confusing noise IMHO.

Maciej