Skip to contentSkip to conversation

what is the proper way to build with fedora rawhide/gcc-5.0?

DISCUSSION Robert P. J. Day 3 participants 8 messages Mar 31, 2015 – Apr 2, 2015

lore
Share & tools
lore
#0 lore raw

i asked about this a few weeks ago, finally getting back to it ...
for better or worse, i'm running fedora rawhide, updated to the point where i have gcc-5.0.0:

$ gcc --version
gcc (GCC) 5.0.0 20150208 (Red Hat 5.0.0-0.10)
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$

which causes a number of build issues trying to build for something as simple as qemux86.

first, there is a linemarkers issue with gcc-5.0 that i got around
by adding to local.conf:

CPPFLAGS_append= " -P"

and there were two native build issues due to gcc-5.0 being far pickier with warnings that i sidestepped with the cheap hack:

ASSUME_PROVIDED += "elfutils-native"
ASSUME_PROVIDED += "binutils-native"

at this point, the build was almost complete when i hit another compile error for udev on the target:

DEBUG: SITE files ['endian-little', 'bit-32', 'ix86-common',
'common-linux', 'common-glibc', 'i586-linux', 'common']
DEBUG: Executing shell function do_compile
NOTE: make -j 8
make: *** No rule to make target '/linux/input.h', needed by 'src/keymap/keys.txt'. Stop.
ERROR: oe_runmake failed
WARNING:
/home/rpjday/oe/builds/qemux86/tmp/work/i586-poky-linux/udev/182-r9/temp/run.do_compile.30377:1 exit 1 from
exit 1
ERROR: Function failed: do_compile (log file is located at /home/rpjday/oe/builds/qemux86/tmp/work/i586-poky-linux/udev/182-r9/temp/log.do_compile.30377)

in any event, is there a *preferred* way to build using fedora
rawide at this point?

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#1 lore raw
Quoted 3 lines · Robert P. J. Day

in any event, is there a *preferred* way to build using fedora
rawide at this point?

Blimey, gcc 5 looks like a barrel of laughs. Is installing gcc 4.x alongside 5.0 possible, and then set BUILD_CC etc?

Ross

#2 lore raw
In reply to Robert P. J. Day
Quoted 15 lines · Robert P. J. Day

i asked about this a few weeks ago, finally getting back to it ...
for better or worse, i'm running fedora rawhide, updated to the point where i have gcc-5.0.0:

$ gcc --version
gcc (GCC) 5.0.0 20150208 (Red Hat 5.0.0-0.10)
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$
Quoted 7 lines

which causes a number of build issues trying to build for something as simple as qemux86.

first, there is a linemarkers issue with gcc-5.0 that i got around
by adding to local.conf:

CPPFLAGS_append= " -P”

This should not be required. Can you post the failing package with error details it should be fixed.

Quoted 6 lines

and there were two native build issues due to gcc-5.0 being far pickier with warnings that i sidestepped with the cheap hack:

ASSUME_PROVIDED += "elfutils-native"
ASSUME_PROVIDED += "binutils-native”

There is 2.25 update available on my contrib tree.
http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/master
should help with binutils.

Quoted 10 lines

at this point, the build was almost complete when i hit another compile error for udev on the target:

DEBUG: SITE files ['endian-little', 'bit-32', 'ix86-common', 'common-linux', 'common-glibc', 'i586-linux', 'common']
DEBUG: Executing shell function do_compile
NOTE: make -j 8
make: *** No rule to make target '/linux/input.h', needed by 'src/keymap/keys.txt'. Stop.

that seems to be unrelated to gcc 5.0 on host. May be you have a different issue there.

Quoted 10 lines

ERROR: oe_runmake failed
WARNING:
/home/rpjday/oe/builds/qemux86/tmp/work/i586-poky-linux/udev/182-r9/temp/run.do_compile.30377:1 exit 1 from
exit 1
ERROR: Function failed: do_compile (log file is located at /home/rpjday/oe/builds/qemux86/tmp/work/i586-poky-linux/udev/182-r9/temp/log.do_compile.30377)

in any event, is there a *preferred* way to build using fedora
rawide at this point?

I think people will care when fedora 22 comes out later this summer or may be when they have beta’s coming out.

Quoted 18 lines

rday

Signature · 13 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                       http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================

-- 
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
#3 lore raw
Quoted 17 lines · Khem Raj
Quoted 17 lines · Robert P. J. Day

i asked about this a few weeks ago, finally getting back to it ...
for better or worse, i'm running fedora rawhide, updated to the point where i have gcc-5.0.0:

$ gcc --version
gcc (GCC) 5.0.0 20150208 (Red Hat 5.0.0-0.10)
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$

which causes a number of build issues trying to build for something as simple as qemux86.

Quoted 7 lines
Quoted 4 lines

first, there is a linemarkers issue with gcc-5.0 that i got around
by adding to local.conf:

CPPFLAGS_append= " -P”

This should not be required. Can you post the failing package with error details it should be fixed.

for people not sure what i'm talking about, this issue was
identified back in feb at red hat:

https://lists.fedoraproject.org/pipermail/devel/2015-February/207549.html

the package that initially tripped me up was ncurses-native, and ncurses is indeed mentioned in that lengthy list of packages.

i can try another build without "-P" and note the packages that fail
if that's useful, although i assume anyone else can trivially do the same thing.

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#4 lore raw
In reply to Khem Raj
Quoted 27 lines · Khem Raj
Quoted 13 lines · Robert P. J. Day

i asked about this a few weeks ago, finally getting back to it
... for better or worse, i'm running fedora rawhide, updated to the point where i have gcc-5.0.0:

$ gcc --version
gcc (GCC) 5.0.0 20150208 (Red Hat 5.0.0-0.10)
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$
Quoted 7 lines

which causes a number of build issues trying to build for something as simple as qemux86.

first, there is a linemarkers issue with gcc-5.0 that i got around
by adding to local.conf:

CPPFLAGS_append= " -P”

This should not be required. Can you post the failing package with error details it should be fixed.

Quoted 4 lines

and there were two native build issues due to gcc-5.0 being far pickier with warnings that i sidestepped with the cheap hack:

Quoted 6 lines
Quoted 2 lines

ASSUME_PROVIDED += "elfutils-native"
ASSUME_PROVIDED += "binutils-native”

There is 2.25 update available on my contrib tree.
http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/master
should help with binutils.

i *think* i mentioned earlier that the first failing package build
is ncurses-native:

| In file included from /home/rpjday/oe/builds/qemux86/tmp/work/x86_64-linux/ncurses-native/5.9-r15.1/ncurses-5.9/ncurses/curses.priv.h:283:0,

|                  from ../ncurses/lib_gen.c:19:
| _9187.c:835:15: error: expected ')' before 'int'
| ../include/curses.h:1594:56: note: in definition of macro

'mouse_trafo'
| #define mouse_trafo(y,x,to_screen)
wmouse_trafo(stdscr,y,x,to_screen)
| ^
| gcc -DHAVE_CONFIG_H -I../ncurses -I/home/rpjday/oe/builds/qemux86/tmp/work/x86_64-linux/ncurses-native/5.9-r15.1/ncurses-5.9/ncurses -isystem/home/rpjday/oe/builds/qemux86/tmp/sysroots/x86_64-linux/usr/include
-D_GNU_SOURCE -DNDEBUG -I. -I../include -I/home/rpjday/oe/builds/qemux86/tmp/work/x86_64-linux/ncurses-native/5.9-r15.1/ncurses-5.9/ncurses/../include -I/home/rpjday/oe/builds/qemux86/tmp/sysroots/x86_64-linux/usr/include -isystem/home/rpjday/oe/builds/qemux86/tmp/sysroots/x86_64-linux/usr/include
-D_GNU_SOURCE -O2 -pipe --param max-inline-insns-single=1200 -fPIC -c /home/rpjday/oe/builds/qemux86/tmp/work/x86_64-linux/ncurses-native/5.9-r15.1/ncurses-5.9/ncurses/base/lib_isendwin.c -o ../obj_s/lib_isendwin.o
| Makefile:1682: recipe for target '../obj_s/lib_gen.o' failed

this appears to be related to the issues listed in this post
describing a mass rebuild of fedora packages with gcc-5.0.0:

https://lists.fedoraproject.org/pipermail/devel/2015-February/207549.html

particularly this:

"Main offender this time is probably the gnu11 change that entails different inline semantics, enables some warnings by default, bumps the __STDC_VERSION__, and so on. Hopefully it won't take too long till these packages catch on. Many packages were not prepared for the new major version of GCC. There's also been quite a lot of churn because of the preprocessor now emitting linemarkers in the output when the -P option is not turned on. The C++ compiler now rejects some code that it used to accept. Furthermore, GCC 5 has a batch of new warnings, which, combined with -Werror, caused some additional failures."

sure enough, down that page, ncurses and a bunch of other packages
are identified as having the issue:

"these packages failed to build because of the changes in the preprocessor; gcc started to generate line directives to better detect whether a macro tokens come from a system header - see
http://gcc.gnu.org/PR60723 The fix is to use the -P option if the code isn't prepared to deal with such directives."

i see that your oe-contrib repo has a newer version of binutils, but
not of ncurses, although your ncurses SRC_URI is different. anyway, this is just what i've tripped over lately on my rawhide system.

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#5 lore raw
In reply to Khem Raj
Quoted 18 lines · Khem Raj
Quoted 18 lines · Robert P. J. Day

i asked about this a few weeks ago, finally getting back to it ...
for better or worse, i'm running fedora rawhide, updated to the point where i have gcc-5.0.0:

$ gcc --version
gcc (GCC) 5.0.0 20150208 (Red Hat 5.0.0-0.10)
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$

which causes a number of build issues trying to build for something as simple as qemux86.

Quoted 7 lines
Quoted 4 lines

first, there is a linemarkers issue with gcc-5.0 that i got around
by adding to local.conf:

CPPFLAGS_append= " -P”

This should not be required. Can you post the failing package with error details it should be fixed.

FYI, your version of ncurses-5,9 with a more upstream SRC_URI
appears to solve the problem with building ncurses-native.

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#6 lore raw
In reply to Khem Raj
Quoted 30 lines · Khem Raj
Quoted 15 lines · Robert P. J. Day

i asked about this a few weeks ago, finally getting back to it ...
for better or worse, i'm running fedora rawhide, updated to the point where i have gcc-5.0.0:

$ gcc --version
gcc (GCC) 5.0.0 20150208 (Red Hat 5.0.0-0.10)
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$
Quoted 7 lines

which causes a number of build issues trying to build for something as simple as qemux86.

first, there is a linemarkers issue with gcc-5.0 that i got around
by adding to local.conf:

CPPFLAGS_append= " -P”

This should not be required. Can you post the failing package with error details it should be fixed.

Quoted 4 lines

and there were two native build issues due to gcc-5.0 being far pickier with warnings that i sidestepped with the cheap hack:

Quoted 6 lines
Quoted 2 lines

ASSUME_PROVIDED += "elfutils-native"
ASSUME_PROVIDED += "binutils-native”

There is 2.25 update available on my contrib tree.
http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/master
should help with binutils.

ok, i finally have a full build for qemux86/core-image-minimal.
things i did:

* wiped the old kernel tarball from my local source mirror -- not sure why that fixed the kernel issue but a fresh download seems to have done the trick.
* removed the above CPPFLAGS_append line from local.conf
* used khem's ncurses recipe
* left the two ASSUME_PROVIDED lines where they were, out of sheer laziness since they seem to work.

enough excitement for one day ...

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#7 lore raw
Quoted 42 lines · Robert P. J. Day
Quoted 30 lines · Khem Raj
Quoted 15 lines · Robert P. J. Day

i asked about this a few weeks ago, finally getting back to it ...
for better or worse, i'm running fedora rawhide, updated to the point where i have gcc-5.0.0:

$ gcc --version
gcc (GCC) 5.0.0 20150208 (Red Hat 5.0.0-0.10)
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$
Quoted 7 lines

which causes a number of build issues trying to build for something as simple as qemux86.

first, there is a linemarkers issue with gcc-5.0 that i got around
by adding to local.conf:

CPPFLAGS_append= " -P”

This should not be required. Can you post the failing package with error details it should be fixed.

Quoted 4 lines

and there were two native build issues due to gcc-5.0 being far pickier with warnings that i sidestepped with the cheap hack:

Quoted 6 lines
Quoted 2 lines

ASSUME_PROVIDED += "elfutils-native"
ASSUME_PROVIDED += "binutils-native”

There is 2.25 update available on my contrib tree.
http://git.openembedded.org/openembedded-core-contrib/log/?h=kraj/master
should help with binutils.

ok, i finally have a full build for qemux86/core-image-minimal.
things i did:

Quoted 7 lines

* wiped the old kernel tarball from my local source mirror -- not sure why that fixed the kernel issue but a fresh download seems to have done the trick.
* removed the above CPPFLAGS_append line from local.conf
* used khem's ncurses recipe
* left the two ASSUME_PROVIDED lines where they were, out of sheer laziness since they seem to work.

my branch will have more fixes for packages that are specifically originating from gcc5 work. Some has already been merged some more are to come

Quoted 14 lines

enough excitement for one day ...

rday

--

========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday

========================================================================