watchdog: fix a small number of "watchog" typos in comments
PATCH 1/1 watchdog: fix a small number of "watchog" typos in comments
All typos in comments, should not affect functionality.
Signed-off-by Robert P. J. Day <[email protected]>
---
drivers/watchdog/booke_wdt.c +1 -1
@@ -25,7 +25,7 @@/* If the kernel parameter wdt=1, the watchdog will be enabled at boot. * Also, the wdt_period sets the watchdog timer period timeout. * For E500 cpus the wdt_period sets which bit changing from 0->1 will -* trigger a watchog timeout. This watchdog timeout will occur 3 times, the +* trigger a watchdog timeout. This watchdog timeout will occur 3 times, the * first time nothing will happen, the second time a watchdog exception will * occur, and the final time the board will reset. */
drivers/watchdog/via_wdt.c +2 -2
@@ -30,7 +30,7 @@#define VIA_WDT_CONF_MMIO 0x02/* 1: enable watchdog MMIO */ /* -* The MMIO region contains the watchog control register and the +* The MMIO region contains the watchdog control register and the * hardware timer counter. */ #define VIA_WDT_MMIO_LEN 8/* MMIO region length in bytes */
@@ -82,7 +82,7 @@ static inline void wdt_reset(void)/* * Timer tick: the timer will make sure that the watchdog timer hardware * is being reset in time. The conditions to do this are: -* 1) the watchog timer has been started and /dev/watchdog is open +* 1) the watchdog timer has been started and /dev/watchdog is open * and there is still time left before userspace should send the * next heartbeat/ping. (note: the internal heartbeat is much smaller * then the external/userspace heartbeat).
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca/dokuwiki
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================Quoted 4 lines · Robert P. J. Day
All typos in comments, should not affect functionality.
Signed-off-by Robert P. J. Day <[email protected]>
Reviewed-by Guenter Roeck <[email protected]>
Quoted 39 lines
---
drivers/watchdog/booke_wdt.c +1
-1@@ -25,7 +25,7 @@/* If the kernel parameter wdt=1, the watchdog will be enabled at boot. * Also, the wdt_period sets the watchdog timer period timeout. * For E500 cpus the wdt_period sets which bit changing from 0->1 will -* trigger a watchog timeout. This watchdog timeout will occur 3 times, the +* trigger a watchdog timeout. This watchdog timeout will occur 3 times, the * first time nothing will happen, the second time a watchdog exception will * occur, and the final time the board will reset. */ drivers/watchdog/via_wdt.c +2
-2@@ -30,7 +30,7 @@#define VIA_WDT_CONF_MMIO 0x02/* 1: enable watchdog MMIO */ /* -* The MMIO region contains the watchog control register and the +* The MMIO region contains the watchdog control register and the * hardware timer counter. */ #define VIA_WDT_MMIO_LEN 8/* MMIO region length in bytes */ @@ -82,7 +82,7 @@ static inline void wdt_reset(void)/* * Timer tick: the timer will make sure that the watchdog timer hardware * is being reset in time. The conditions to do this are: -* 1) the watchog timer has been started and /dev/watchdog is open +* 1) the watchdog timer has been started and /dev/watchdog is open * and there is still time left before userspace should send the * next heartbeat/ping. (note: the internal heartbeat is much smaller * then the external/userspace heartbeat).