Skip to contentSkip to conversation

using objdump/readelf/nm to dump symbols by individual source file?

U-Boot Robert P. J. Day 2 participants 4 messages Apr 7, 2019 – Apr 8, 2019

lore
Share & tools
lore
#0 lore raw

i'm doing this in the context of building for ARM with a linaro
toolchain, but i'm sure it's equally valid in the context of a native build.

i'm trying to generate the same output as u-boot.map, but more
condensed and with each symbol associated with its original source file (if that's even possible).

for example, there are a couple weak symbols in board_f.c:

  __weak int arch_cpu_init(void)
  {
        return 0;
  }

  __weak int mach_cpu_init(void)
  {
        return 0;
  }

so depending on the target board, the final included version of such a routine might come from board_f.c, or it might be overridden at the board level.

you can sort of see this in u-boot.map:

.text.arch_cpu_init

                0x0000000000000000        0x8 common/built-in.o

...
.text.mach_cpu_init

                0x0000000004011cac        0x8 common/built-in.o
                0x0000000004011cac                mach_cpu_init

except i was hoping to be able to list included symbols by their *original* source file, and listed one file at a time, so the output would have the format:

board_f.o
mach_cpu_init
... other stuff from board_f.o

i could swear i once knew how to do this, but i've forgotten (or perhaps i'm misremembering). is there some variation of objdump, readelf or nm that will do what i want? i need nothing other than, for each source file, the symbols that were included in the final ELF file from that source file.

can i do this?

rday

#1 lore raw
Quoted 44 lines · Robert P. J. Day

i'm doing this in the context of building for ARM with a linaro
toolchain, but i'm sure it's equally valid in the context of a native build.

i'm trying to generate the same output as u-boot.map, but more
condensed and with each symbol associated with its original source file (if that's even possible).

for example, there are a couple weak symbols in board_f.c:

  __weak int arch_cpu_init(void)
  {
        return 0;
  }

  __weak int mach_cpu_init(void)
  {
        return 0;
  }

so depending on the target board, the final included version of such a routine might come from board_f.c, or it might be overridden at the board level.

you can sort of see this in u-boot.map:

.text.arch_cpu_init

                0x0000000000000000        0x8 common/built-in.o

...
.text.mach_cpu_init

                0x0000000004011cac        0x8 common/built-in.o
                0x0000000004011cac                mach_cpu_init

except i was hoping to be able to list included symbols by their *original* source file, and listed one file at a time, so the output would have the format:

board_f.o
mach_cpu_init
... other stuff from board_f.o

Quoted 8 lines

i could swear i once knew how to do this, but i've forgotten (or perhaps i'm misremembering). is there some variation of objdump, readelf or nm that will do what i want? i need nothing other than, for each source file, the symbols that were included in the final ELF file from that source file.

can i do this?

nm -l u-boot seems to give me what you're asking for

$ nm -l u-boot
0089b8d8 b a_b  /home/chrisp/src/u-boot/cmd/load.c:573
0089f62c b act.10860
00857780 t add_ino      /home/chrisp/src/u-boot/fs/ubifs/recovery.c:1261
00828b34 T add_mtd_device
/home/chrisp/src/u-boot/drivers/mtd/mtdcore.c:410
00829f7c T add_mtd_partitions
/home/chrisp/src/u-boot/drivers/mtd/mtdpart.c:865
00835b2c t add_to_list
0085188c t adjust_lpt_heap.isra.1
/home/chrisp/src/u-boot/fs/ubifs/lprops.c:635
0086b110 T adler32
008775e0 T __aeabi_idiv /home/chrisp/src/u-boot/arch/arm/lib/lib1funcs.S:251
008776c4 T __aeabi_idivmod
/home/chrisp/src/u-boot/arch/arm/lib/lib1funcs.S:340
00877544 T __aeabi_uidiv
/home/chrisp/src/u-boot/arch/arm/lib/lib1funcs.S:199
008776ac T __aeabi_uidivmod
/home/chrisp/src/u-boot/arch/arm/lib/lib1funcs.S:324
008776ec T __aeabi_uldivmod
/home/chrisp/src/u-boot/arch/arm/lib/uldivmod.S:38
00820fd4 t alloc_priv
0081ac20 t alloc_simple /home/chrisp/src/u-boot/common/malloc_simple.c:17
#2 lore raw
Quoted 73 lines · Chris Packham
Quoted 44 lines · Robert P. J. Day

i'm doing this in the context of building for ARM with a linaro
toolchain, but i'm sure it's equally valid in the context of a native build.

i'm trying to generate the same output as u-boot.map, but more
condensed and with each symbol associated with its original source file (if that's even possible).

for example, there are a couple weak symbols in board_f.c:

  __weak int arch_cpu_init(void)
  {
        return 0;
  }

  __weak int mach_cpu_init(void)
  {
        return 0;
  }

so depending on the target board, the final included version of such a routine might come from board_f.c, or it might be overridden at the board level.

you can sort of see this in u-boot.map:

.text.arch_cpu_init

                0x0000000000000000        0x8 common/built-in.o

...
.text.mach_cpu_init

                0x0000000004011cac        0x8 common/built-in.o
                0x0000000004011cac                mach_cpu_init

except i was hoping to be able to list included symbols by their *original* source file, and listed one file at a time, so the output would have the format:

board_f.o
mach_cpu_init
... other stuff from board_f.o

Quoted 8 lines

i could swear i once knew how to do this, but i've forgotten (or perhaps i'm misremembering). is there some variation of objdump, readelf or nm that will do what i want? i need nothing other than, for each source file, the symbols that were included in the final ELF file from that source file.

can i do this?

nm -l u-boot seems to give me what you're asking for

$ nm -l u-boot
0089b8d8 b a_b  /home/chrisp/src/u-boot/cmd/load.c:573
0089f62c b act.10860
00857780 t add_ino      /home/chrisp/src/u-boot/fs/ubifs/recovery.c:1261
00828b34 T add_mtd_device
/home/chrisp/src/u-boot/drivers/mtd/mtdcore.c:410
00829f7c T add_mtd_partitions
/home/chrisp/src/u-boot/drivers/mtd/mtdpart.c:865
00835b2c t add_to_list
0085188c t adjust_lpt_heap.isra.1
/home/chrisp/src/u-boot/fs/ubifs/lprops.c:635
0086b110 T adler32
008775e0 T __aeabi_idiv /home/chrisp/src/u-boot/arch/arm/lib/lib1funcs.S:251
008776c4 T __aeabi_idivmod
/home/chrisp/src/u-boot/arch/arm/lib/lib1funcs.S:340
Quoted 8 lines
00877544 T __aeabi_uidiv
/home/chrisp/src/u-boot/arch/arm/lib/lib1funcs.S:199
008776ac T __aeabi_uidivmod
/home/chrisp/src/u-boot/arch/arm/lib/lib1funcs.S:324
008776ec T __aeabi_uldivmod
/home/chrisp/src/u-boot/arch/arm/lib/uldivmod.S:38
00820fd4 t alloc_priv
0081ac20 t alloc_simple /home/chrisp/src/u-boot/common/malloc_simple.c:17

Just re-read your question. You might need to do some post processing to group by the source file.

#3 lore raw
Quoted 83 lines · Chris Packham
Quoted 73 lines · Chris Packham
Quoted 44 lines · Robert P. J. Day

i'm doing this in the context of building for ARM with a linaro
toolchain, but i'm sure it's equally valid in the context of a native build.

i'm trying to generate the same output as u-boot.map, but more
condensed and with each symbol associated with its original source file (if that's even possible).

for example, there are a couple weak symbols in board_f.c:

  __weak int arch_cpu_init(void)
  {
        return 0;
  }

  __weak int mach_cpu_init(void)
  {
        return 0;
  }

so depending on the target board, the final included version of such a routine might come from board_f.c, or it might be overridden at the board level.

you can sort of see this in u-boot.map:

.text.arch_cpu_init

                0x0000000000000000        0x8 common/built-in.o

...
.text.mach_cpu_init

                0x0000000004011cac        0x8 common/built-in.o
                0x0000000004011cac                mach_cpu_init

except i was hoping to be able to list included symbols by their *original* source file, and listed one file at a time, so the output would have the format:

board_f.o
mach_cpu_init
... other stuff from board_f.o

Quoted 8 lines

i could swear i once knew how to do this, but i've forgotten (or perhaps i'm misremembering). is there some variation of objdump, readelf or nm that will do what i want? i need nothing other than, for each source file, the symbols that were included in the final ELF file from that source file.

can i do this?

nm -l u-boot seems to give me what you're asking for

$ nm -l u-boot
0089b8d8 b a_b  /home/chrisp/src/u-boot/cmd/load.c:573
0089f62c b act.10860
00857780 t add_ino      /home/chrisp/src/u-boot/fs/ubifs/recovery.c:1261
00828b34 T add_mtd_device
/home/chrisp/src/u-boot/drivers/mtd/mtdcore.c:410
00829f7c T add_mtd_partitions
/home/chrisp/src/u-boot/drivers/mtd/mtdpart.c:865
00835b2c t add_to_list
0085188c t adjust_lpt_heap.isra.1
/home/chrisp/src/u-boot/fs/ubifs/lprops.c:635
0086b110 T adler32
008775e0 T __aeabi_idiv /home/chrisp/src/u-boot/arch/arm/lib/lib1funcs.S:251
008776c4 T __aeabi_idivmod
/home/chrisp/src/u-boot/arch/arm/lib/lib1funcs.S:340
Quoted 8 lines
00877544 T __aeabi_uidiv
/home/chrisp/src/u-boot/arch/arm/lib/lib1funcs.S:199
008776ac T __aeabi_uidivmod
/home/chrisp/src/u-boot/arch/arm/lib/lib1funcs.S:324
008776ec T __aeabi_uldivmod
/home/chrisp/src/u-boot/arch/arm/lib/uldivmod.S:38
00820fd4 t alloc_priv
0081ac20 t alloc_simple /home/chrisp/src/u-boot/common/malloc_simple.c:17
Quoted 2 lines

Just re-read your question. You might need to do some post processing to group by the source file.

yes, that's the info i'm after, i could swear i once identified a
command that would give it to me in the format i was suggesting. or perhaps i'm misremembering. thanks.

rday