Skip to contentSkip to conversation

CROSS_COMPILE not taken into account on parisc64?

DISCUSSION Meelis Roos 2 participants 3 messages Feb 23, 2010 Kbuild

lore
Share & tools
lore
#0 lore raw

I am trying to build 2.6.33-rc* for a 64-bit parisc machine (using kernel.package in Debian unstable if it matters). The build fails assembling any .ko files with objcopy:

objcopy --add-gnu-debuglink=/home/mroos/linux-2.6/debian/linux-image-2.6.33-rc8-00173-g627fa17/usr/lib/debug/lib/modules/2.6.33-rc8-00173-g627fa17/kernel/drivers/cdrom/cdrom.ko /home/mroos/linux-2.6/debian/linux-image-2.6.33-rc8-00173-g627fa17/lib/modules/2.6.33-rc8-00173-g627fa17/kernel/drivers/cdrom/cdrom.ko objcopy:/home/mroos/linux-2.6/debian/linux-image-2.6.33-rc8-00173-g627fa17/lib/modules/2.6.33-rc8-00173-g627fa17/kernel/drivers/cdrom/cdrom.ko: File format not recognized

Trying hppa64-linux-gnu-objcopy by hand works - but we should be using this cross compile prefix automatically.

We do have
OBJDUMP = $(CROSS_COMPILE)objdump
in main Makefile, and

ifdef CONFIG_64BIT

UTS_MACHINE     := parisc64
CHECKFLAGS      += -D__LP64__=1 -m64
WIDTH           := 64
CROSS_COMPILE   := hppa64-linux-gnu-

else # 32-bit
WIDTH :=
endif

in arch/parisc/Makefile so it seems OK at the first glance.

grep 64BIT .config tells
CONFIG_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y

so this is correct too.

However, I see no inclusion of arch-specific Makefile before the assignment of OBJCOPY in main Makefile. Could this be the problem?

Signature · 1 line
Meelis Roos ([email protected])
#1 lore raw
Quoted 6 lines · Meelis Roos

I am trying to build 2.6.33-rc* for a 64-bit parisc machine (using kernel.package in Debian unstable if it matters). The build fails assembling any .ko files with objcopy:

objcopy --add-gnu-debuglink=/home/mroos/linux-2.6/debian/linux-image-2.6.33-rc8-00173-g627fa17/usr/lib/debug/lib/modules/2.6.33-rc8-00173-g627fa17/kernel/drivers/cdrom/cdrom.ko /home/mroos/linux-2.6/debian/linux-image-2.6.33-rc8-00173-g627fa17/lib/modules/2.6.33-rc8-00173-g627fa17/kernel/drivers/cdrom/cdrom.ko objcopy:/home/mroos/linux-2.6/debian/linux-image-2.6.33-rc8-00173-g627fa17/lib/modules/2.6.33-rc8-00173-g627fa17/kernel/drivers/cdrom/cdrom.ko: File format not recognized

I guess this objcopy command is run outside of the kernel build system (a packaging script storing debug info in /usr/lib/debug), nothing the kernel makefiles can do about.

[...]

Quoted 2 lines

However, I see no inclusion of arch-specific Makefile before the assignment of OBJCOPY in main Makefile. Could this be the problem?

That's OK, make variables assigned with '=' are expanded when they are used.

Michal

#2 lore raw
Quoted 3 lines

I guess this objcopy command is run outside of the kernel build system (a packaging script storing debug info in /usr/lib/debug), nothing the kernel makefiles can do about.

Thanks - my bad that I didn't notice this.

Signature · 1 line
Meelis Roos ([email protected])