Skip to contentSkip to conversation

[2.6.6] Synaptics driver is 'jumpy'

DISCUSSION [email protected] 1 participant 2 messages May 16, 2004 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 10 lines

Hello,

Quoted 4 lines

The fact is, it worked _perfectly_ under 2.6.5 with the standard mode. No problems whatsoever. Something must have changed (but I'm too unfamiliar with kernel code) that causes some sort of a delay in the processing of the input queue of the touchpad.

same problem here with 2.6.6 (recent gentoo system). I am running 2.6.6-rc3 and 2.6.5 without the problems.

fwiw, I have the same observation moving from 2.6.5-mm4 -> 2.6.6 on a gentoo machine... On the observations side, i can add that it not only fails to smoothly follow the track it should, but it seems it's back to its old bad behavior of randomly jumping to the top-right corner of the screen... :-(

/Anders

#2 lore raw
Quoted 1 line

fwiw, I have the same observation moving from 2.6.5-mm4 -> 2.6.6 on a gentoo machine... On the observations side, i can add that it not only fails to smoothly follow the track it should, but it seems it's back to its old bad behavior of randomly jumping to the top-right corner of the screen... :-(

Oh, and this is on a Dell L400 with synaptics touchpad, but using the external ps/2 port to a "normal" mouse... No USB involved...