Intel E7221 Server Board SATA
I have a Server here with no working SATA drives
( Intel Server board SE7221BK1-E )
I've tried 2.6.11 and then 2.6.12-pre3
*grumble intel bleading edge products*
anyway does anyone have any clue or patches that might make this beast
tick (I'm supposed to be installing a file server on Tuesday :( )
if i get really desperate i might have to try the Redhat drivers - but I don't really want software raid just pain SATA .....
attached is a lspci output
any other info needed ?
TIA
00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 05)
Subsystem: Intel Corp. Server Memory Controller Hub
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] #09 [2109]
00:02.0 VGA compatible controller: Intel Corp. Graphics Controller (rev 05) (prog-if 00 [VGA])
Subsystem: Intel Corp.: Unknown device 3444 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at dfe00000 (32-bit, non-prefetchable) [size=512K] I/O ports at de00 [size=8] Memory at c0000000 (32-bit, prefetchable) [size=256M] Memory at dfe80000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: [d0] Power Management version 2
00:1c.0 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 0 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=04, sec-latency=0 Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2
00:1d.0 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 3444
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at de80 [size=32]
00:1d.1 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 3444
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at df00 [size=32]
00:1d.2 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 3444
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at df80 [size=32]
00:1d.7 USB Controller: Intel Corp. I/O Controller Hub USB2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Intel Corp. I/O Controller Hub USB2
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at dfeffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: dff00000-dfffffff Capabilities: [50] #0d [0000]
00:1f.0 ISA bridge: Intel Corp. I/O Controller Hub LPC (rev 03)
Subsystem: Intel Corp. I/O Controller Hub LPC
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. I/O Controller Hub PATA (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corp.: Unknown device 3444
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at fff0 [size=16]
00:1f.3 SMBus: Intel Corp. I/O Controller Hub SMBus (rev 03)
Subsystem: Intel Corp.: Unknown device 3444
Flags: medium devsel, IRQ 10
I/O ports at 0400 [size=32]
01:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at ee00 [size=256]
Memory at dffdbc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
01:03.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller (rev 05)
Subsystem: Intel Corp.: Unknown device 3444
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 5
Memory at dffe0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at ef80 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device.
02:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=02, secondary=04, subordinate=04, sec-latency=48
Capabilities: [44] #10 [0071]
Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [6c] Power Management version 2
Capabilities: [d8]
02:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
Capabilities: [44] #10 [0071]
Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [6c] Power Management version 2
Capabilities: [d8]
Linux servert 2.6.12-rc3 #1 SMP Thu Apr 29 17:17:10 NZST 2004 i686 unknown unknown GNU/Linux
Quoted 2 lines · John Duthie
if i get really desperate i might have to try the Redhat drivers - but I don't really want software raid just pain SATA .....
Boot 2.6.11ac7 on it and specify the boot option "all-generic-ide" and it should grab the SATA device as generic IDE. That limits you to BIOS configured speed and no other useful features but it is usually ok.
Alan