ACPI/i915: Dell Inspiron 5567 fails to resume from S3 (black screen), DSDT patch included
Hello everyone,
I am reporting a long-standing bug on the Dell Inspiron 5567 that causes it to fail when resuming from S3 sleep, resulting in a black screen. This issue has been present for years, including on Windows.
After a deep investigation, I've traced the root cause to a logical flaw in the vendor's ACPI DSDT and have tried to develop a patch addressing that. However, a final experiment has left me with a question about the interaction between the ACPI code and the i915 driver, and I am seeking expert insight.
Firstly, the original DSDT in the _PTS method calls the sleep trigger (SLPE = One) before setting a critical flag (AES3 = One), meaning the flag is never set for S3 sleep.
The faulty code:
Method (SPTS, 1, NotSerialized)
{
SLPX = One
SLPE = One
If ((Arg0 == 0x03))
{
AES3 = One
}
}
My fix was to reorder the operations to ensure AES3 is set before sleeping. With this patch, loaded via a GRUB override, S3 suspend and resume are perfectly stable.
Working patch:
dsdt.dsl +0 -0
@@ -4359,11 +4359,11 @@ DefinitionBlock ("", "DSDT", 2, "DELL ", "CBX3 ", 0x01072009)
Method (SPTS, 1, NotSerialized)
{
SLPX = One
- SLPE = One
If ((Arg0 == 0x03))
{
AES3 = One
}
+ SLPE = One
}
Method (SWAK, 1, NotSerialized)
(Note: I also confirmed that the _WAK sequence explicitly clears this flag (AES3 = Zero), more specifically in the SWAK method of DSDT, which supports the theory that it is part of an intended state machine.)
Now, here comes the main part.
The _WAK sequence on this machine calls a graphics-specific method, _SB.PCI0.GFX0.IUEH, which is defined in a secondary ACPI table (SSDT). This method appears to be responsible for display re-initialization after waking.
To confirm its role, I created an experimental patch where I commented out the calls to IUEH inside the RWAK method. I expected this to reliably cause a black screen on resume.
Surprisingly, it did not. The system still resumed and the display turned on, even though my patched ACPI table with the disabled IUEH calls was successfully loaded (confirmed via dmesg: "ACPI: DSDT ACPI table found in initrd...").
Here are the questions:
1) Is the i915 driver "saving the day?" Does the kernel's native i915 driver handle the entire display resume sequence on its own, making the ACPI IUEH call redundant on a modern Linux system?
2) What is the failure mechanism? If the i915 driver is doing the work, why does the black screen bug happen in the first place? Does the driver's resume sequence depend on a specific hardware state that is only correctly configured when my AES3 = One patch is applied before sleep?
3) How can I debug this further? Are there specific tracepoints or debug flags in the i915 driver I can enable to see where the resume sequence fails when AES3 is not set?
Here is the full acpidump for review: https://gist.githubusercontent.com/BandhanPramanik/3e5350019b513c0d32afed1f22dbaf42/raw/1f44ddcfb17277ce282cf03f9aab2f91bec1bd30/acpidump
Thank you for your time and for maintaining these critical subsystems.
Bandhan Pramanik
বন্ধন প্রামাণিক
Patchwork
CI✗ LGCI.VerificationFailed: failure for ACPI/i915: Dell Inspiron 5567 fails to resume from S3 (black screen), DSDT patch included
== Series Details ==
== Series Details ==
Series: ACPI/i915: Dell Inspiron 5567 fails to resume from S3 (black screen), DSDT patch included
URL : https://patchwork.freedesktop.org/series/155167/
State : failure
== Summary ==
Address '[email protected]' is not on the allowlist, which prevents CI from being triggered for this patch. If you want Intel GFX CI to accept this address, please contact the script maintainers at [email protected]. Exception occurred during validation, bailing out!