spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request()
Subsystems (2)
PATCH 1/1 spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request()
From: Markus Elfring <[email protected]>
Date: Sat, 7 Sep 2019 13:51:16 +0200
Simplify this function implementation by using a known function.
Generated by: scripts/coccinelle/api/ptr_ret.cocci
--- drivers/spi/spi-gpio.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/spi/spi-gpio.c +1 -4
@@ -290,10 +290,7 @@ static int spi_gpio_request(struct device *dev, struct spi_gpio *spi_gpio)return PTR_ERR (spi_gpio->miso); spi_gpio->sck =devm_gpiod_get (dev,"sck" ,GPIOD_OUT_LOW ); -if (IS_ERR (spi_gpio->sck)) -return PTR_ERR (spi_gpio->sck); - -return 0 ; +return PTR_ERR_OR_ZERO (spi_gpio->sck); }#ifdef CONFIG_OF
--
2.23.0
Quoted 8 lines · Markus Elfring
From: Markus Elfring <[email protected]>
Date: Sat, 7 Sep 2019 13:51:16 +0200Simplify this function implementation by using a known function.
Generated by:
scripts/coccinelle/api/ptr_ret.cocciSigned-off-by Markus Elfring <[email protected]>
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Mark Brown
maintainerApplied "spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request()" to the spi tree
In reply to Markus ElfringThe patch
spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request()
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.4
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 8995673e6f584c2140b565d9ef20e4e4599aad7e Mon Sep 17 00:00:00 2001
From: Markus Elfring <[email protected]>
Date: Sat, 7 Sep 2019 13:51:16 +0200
Subject: [PATCH] spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request()
Simplify this function implementation by using a known function.
Generated by: scripts/coccinelle/api/ptr_ret.cocci
--- drivers/spi/spi-gpio.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/spi/spi-gpio.c +1 -4
@@ -290,10 +290,7 @@ static int spi_gpio_request(struct device *dev, struct spi_gpio *spi_gpio)return PTR_ERR (spi_gpio->miso); spi_gpio->sck =devm_gpiod_get (dev,"sck" ,GPIOD_OUT_LOW ); -if (IS_ERR (spi_gpio->sck)) -return PTR_ERR (spi_gpio->sck); - -return 0 ; +return PTR_ERR_OR_ZERO (spi_gpio->sck); }#ifdef CONFIG_OF
Signature · 1 line
2.20.1