Skip to contentSkip to conversation

ultra small alsa library

DISCUSSION Marco Schuster 3 participants 4 messages Aug 2, 2008 – Aug 5, 2008 2 messages not in the archive

lore
Share & tools
lore
#0 lore raw

hi all,

i try to run a creative extigy via the usb port on a nslu2. the nslu2 is a arm-based (xscale) mini-server with 32mb of ram and so very resource limited if you let services run on it.
when i now attach the extigy and play some random stuff - doesn't matter which player - the sound is very intermittent and not recognizable. i think this is due to massive swapping somewhere.
what are the minimum prerequisites for using s-alsa (esp. kernel!)? with 2.6.24 and debian i got segfaults.

thank you,
marco

#1 lore raw
Quoted 2 lines · Marco Schuster

what are the minimum prerequisites for using s-alsa (esp. kernel!)? with 2.6.24 and debian i got segfaults.

Hello Marco,

I'll leave others for the prerequisites.

But I can tell you I run alsa on a little smartphone with 64MBytes of memory, with a graphical application taking 25MBytes at its start. I have no problems so far running alsa to play songs / use my phone.

My hardware setup (mio a701 smartphone) :
- RAM: 64 MB
- CPU: XScale PXA272
- Storage : SD card
- Swap: none (poor SD card otherwise)

Sofware setup :
- Base stolen from OPIE 4.3.1
- custom fixes for the smartphone, nothing related to alsa

I hope that cheers you a bit about your configuration.

--
Robert

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#4 lore raw

The problem I have is:
As soon as I try to play a mp3 via mpg123, in dmesg comes the following error:
Division by zero in kernel.
[<c0026e2c>] (dump_stack+0x0/0x14) from [<c0026e58>] (__div0+0x18/0x20) [<c0026e40>] (__div0+0x0/0x20) from [<c011c65c>] (Ldiv0+0x8/0x10) [<bf0267ec>] (iso_stream_find+0x0/0x340 [ehci_hcd]) from [<bf028140>] (ehci_urb_enqueue+0x848/0xdf4 [ehci_hcd])
[<bf0278f8>] (ehci_urb_enqueue+0x0/0xdf4 [ehci_hcd]) from [<bf005228>] (usb_hcd_submit_urb+0x660/0x77c [usbcore])
[<bf004bc8>] (usb_hcd_submit_urb+0x0/0x77c [usbcore]) from [<bf0057fc>] (usb_submit_urb+0x228/0x264 [usbcore])
[<bf0055d4>] (usb_submit_urb+0x0/0x264 [usbcore]) from [<bf1c2820>] (start_urbs+0x1cc/0x308 [snd_usb_audio])
r6:00000000 r5:c0c2dc10 r4:00000010
[<bf1c2654>] (start_urbs+0x0/0x308 [snd_usb_audio]) from [<bf1c4d78>] (snd_usb_pcm_prepare+0xa4/0xb8 [snd_usb_audio])
r7:00000000 r6:00000000 r5:c0c2b800 r4:c0c2dc10
[<bf1c4cd4>] (snd_usb_pcm_prepare+0x0/0xb8 [snd_usb_audio]) from [<bf19bdc4>] (snd_pcm_do_prepare+0x1c/0x3c [snd_pcm])
r6:00000802 r5:c13d02c0 r4:c13d02c0
[<bf19bda8>] (snd_pcm_do_prepare+0x0/0x3c [snd_pcm]) from [<bf19b96c>] (snd_pcm_action_single+0x40/0x7c [snd_pcm])
r4:bf1acd74
[<bf19b92c>] (snd_pcm_action_single+0x0/0x7c [snd_pcm]) from [<bf19c774>] (snd_pcm_action_nonatomic+0x58/0x70 [snd_pcm])
r7:00044930 r6:bf1acd74 r5:00000802 r4:c13d02c0
[<bf19c71c>] (snd_pcm_action_nonatomic+0x0/0x70 [snd_pcm]) from [<bf19eba8>] (snd_pcm_common_ioctl1+0x664/0xf7c [snd_pcm])
r6:c13d02c0 r5:00044930 r4:00044930
[<bf19e544>] (snd_pcm_common_ioctl1+0x0/0xf7c [snd_pcm]) from [<bf19fe18>] (snd_pcm_playback_ioctl1+0x48c/0x4b0 [snd_pcm])
[<bf19f98c>] (snd_pcm_playback_ioctl1+0x0/0x4b0 [snd_pcm]) from [<bf19ff20>] (snd_pcm_playback_ioctl+0x34/0x40 [snd_pcm])
[<bf19feec>] (snd_pcm_playback_ioctl+0x0/0x40 [snd_pcm]) from [<c0097e70>] (do_ioctl+0x34/0x78)
[<c0097e3c>] (do_ioctl+0x0/0x78) from [<c0098114>] (vfs_ioctl+0x260/0x290)
r5:00044930 r4:c0fbcbc0
[<c0097eb4>] (vfs_ioctl+0x0/0x290) from [<c009819c>] (sys_ioctl+0x58/0x78)
r7:00004140 r6:c0fbcbc0 r5:00044930 r4:00000000
[<c0098144>] (sys_ioctl+0x0/0x78) from [<c0022de0>] (ret_fast_syscall+0x0/0x2c)
r8:c0022f84 r7:00000036 r6:beebb3a0 r5:beebb708 r4:00043598

Can anyone point me what goes wrong here?
Kernel is debian 2.6.24-1-ixp4xx (armv5tel).

Thanks,
Marco

#5 lore raw

At Sat, 2 Aug 2008 22:34:22 +0200,

Quoted 46 lines · Marco Schuster

The problem I have is:
As soon as I try to play a mp3 via mpg123, in dmesg comes the following error:
Division by zero in kernel.
[<c0026e2c>] (dump_stack+0x0/0x14) from [<c0026e58>] (__div0+0x18/0x20) [<c0026e40>] (__div0+0x0/0x20) from [<c011c65c>] (Ldiv0+0x8/0x10) [<bf0267ec>] (iso_stream_find+0x0/0x340 [ehci_hcd]) from [<bf028140>] (ehci_urb_enqueue+0x848/0xdf4 [ehci_hcd])
[<bf0278f8>] (ehci_urb_enqueue+0x0/0xdf4 [ehci_hcd]) from [<bf005228>] (usb_hcd_submit_urb+0x660/0x77c [usbcore])
[<bf004bc8>] (usb_hcd_submit_urb+0x0/0x77c [usbcore]) from [<bf0057fc>] (usb_submit_urb+0x228/0x264 [usbcore])
[<bf0055d4>] (usb_submit_urb+0x0/0x264 [usbcore]) from [<bf1c2820>] (start_urbs+0x1cc/0x308 [snd_usb_audio])
r6:00000000 r5:c0c2dc10 r4:00000010
[<bf1c2654>] (start_urbs+0x0/0x308 [snd_usb_audio]) from [<bf1c4d78>] (snd_usb_pcm_prepare+0xa4/0xb8 [snd_usb_audio])
r7:00000000 r6:00000000 r5:c0c2b800 r4:c0c2dc10
[<bf1c4cd4>] (snd_usb_pcm_prepare+0x0/0xb8 [snd_usb_audio]) from [<bf19bdc4>] (snd_pcm_do_prepare+0x1c/0x3c [snd_pcm])
r6:00000802 r5:c13d02c0 r4:c13d02c0
[<bf19bda8>] (snd_pcm_do_prepare+0x0/0x3c [snd_pcm]) from [<bf19b96c>] (snd_pcm_action_single+0x40/0x7c [snd_pcm])
r4:bf1acd74
[<bf19b92c>] (snd_pcm_action_single+0x0/0x7c [snd_pcm]) from [<bf19c774>] (snd_pcm_action_nonatomic+0x58/0x70 [snd_pcm])
r7:00044930 r6:bf1acd74 r5:00000802 r4:c13d02c0
[<bf19c71c>] (snd_pcm_action_nonatomic+0x0/0x70 [snd_pcm]) from [<bf19eba8>] (snd_pcm_common_ioctl1+0x664/0xf7c [snd_pcm])
r6:c13d02c0 r5:00044930 r4:00044930
[<bf19e544>] (snd_pcm_common_ioctl1+0x0/0xf7c [snd_pcm]) from [<bf19fe18>] (snd_pcm_playback_ioctl1+0x48c/0x4b0 [snd_pcm])
[<bf19f98c>] (snd_pcm_playback_ioctl1+0x0/0x4b0 [snd_pcm]) from [<bf19ff20>] (snd_pcm_playback_ioctl+0x34/0x40 [snd_pcm])
[<bf19feec>] (snd_pcm_playback_ioctl+0x0/0x40 [snd_pcm]) from [<c0097e70>] (do_ioctl+0x34/0x78)
[<c0097e3c>] (do_ioctl+0x0/0x78) from [<c0098114>] (vfs_ioctl+0x260/0x290)
r5:00044930 r4:c0fbcbc0
[<c0097eb4>] (vfs_ioctl+0x0/0x290) from [<c009819c>] (sys_ioctl+0x58/0x78)
r7:00004140 r6:c0fbcbc0 r5:00044930 r4:00000000
[<c0098144>] (sys_ioctl+0x0/0x78) from [<c0022de0>] (ret_fast_syscall+0x0/0x2c)
r8:c0022f84 r7:00000036 r6:beebb3a0 r5:beebb708 r4:00043598

Quoted 2 lines

Can anyone point me what goes wrong here?
Kernel is debian 2.6.24-1-ixp4xx (armv5tel).

According to the stack trace, this looks like a bug in ehci driver. Better to ask on linux-usb ML.

Takashi