Skip to contentSkip to conversation

: Rate conversion plugin generates noise on frequency reduction

ALSA - lib 0000385 [email protected] 1 participant 1 message Oct 22, 2004

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=385>
======================================================================

Reported By:                fmoraes
Assigned To:                perex
======================================================================
Project:                    ALSA - lib
Issue ID:                   385
Category:                   pcm - digital audio
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     assigned
======================================================================
Date Submitted:             07-13-2004 19:46 CEST
Last Modified:              10-22-2004 16:34 CEST

======================================================================
Summary: Rate conversion plugin generates noise on frequency
reduction
Description:
When reducing the frequency, the pcm_rate plugin causes noise on the output data. This has been tested with both the snd-cs46xx and snd-emu10k1x drivers and the following .asoundrc can be used to recreate the output in a file:

pcm.CS46xx {
type hw
card 0
}

pcm.filetest {
	type file
	slave {
		pcm "CS46xx"
	}
	file "/home/fmoraes/test-out.raw"
	format "raw"
}
pcm.test {
	type rate
	slave {
		pcm "filetest"
		format "S16_LE"
		rate 8000
	}
}

Playing a 48Khz file will cause noticeable noise on the output (noise is more noticeable the lower the target frequency is).
======================================================================

----------------------------------------------------------------------
Tobias Diedrich - 10-21-04 17:01
----------------------------------------------------------------------
I second that. Downsampling even from 48000Hz to 44100Hz produces very noticable artifacts, which sound very much like nearest neighbour resampling artifacts and are especially evident in high pitched vocals. It would also be nice to implement better resampling methods than just linear resampling, AFAICS from the source polyphase and bandlimited resampling are planned but not yet implemented.

----------------------------------------------------------------------
perex - 10-22-04 16:34
----------------------------------------------------------------------
The reported problem should be solved in 1.0.7rc releases.

At the time, we don't have free resources to write code for another resampling method. Also, there are several problems to use methods based on sample history.

Issue History
Date Modified Username Field Change
======================================================================

07-13-04 19:46 fmoraes        New Issue                                    
07-15-04 14:07 perex          Status                   new => assigned     
07-15-04 14:07 perex          Assigned To               => perex           

10-21-04 16:57 Tobias DiedrichIssue Monitored: Tobias Diedrich

10-21-04 17:01 Tobias DiedrichNote Added: 0002223
10-22-04 16:19 perex Project ALSA - driver => ALSA -
lib
10-22-04 16:20 perex Category OTHERS => pcm - digital
audio
10-22-04 16:34 perex Note Added: 0002244
======================================================================

-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl