Skip to contentSkip to conversation

zynqmp: Intended use of ZYNQMP_PSU_INIT_ENABLED

DISCUSSION Sean Anderson 2 participants 2 messages Aug 26, 2025 – Aug 27, 2025

lore
Share & tools
lore
#0 lore raw

Hi Michal,

How is ZYNQMP_PSU_INIT_ENABLED supposed to work? U-Boot runs from DRAM, and one of the things that psu_init does is initialize DRAM. This tends not to go very well. So I am wondering how this config is supposed to work? Note I am not talking about the SPL variant of this option.

I am wondering if we even need this config in the first place.

--Sean

#1 lore raw

Hi Sean,

Quoted 8 lines · Sean Anderson

Hi Michal,

How is ZYNQMP_PSU_INIT_ENABLED supposed to work? U-Boot runs from DRAM, and one of the things that psu_init does is initialize DRAM. This tends not to go very well. So I am wondering how this config is supposed to work? Note I am not talking about the SPL variant of this option.

I am wondering if we even need this config in the first place.

This is for configuration where small/mini u-boot is running out of OCM not DDR.

Thanks,
Michal