Skip to contentSkip to conversation

ACPI "Soft-off" power button only rebooting system, not powering off

DISCUSSION Bodo Eggert 1 participant 1 message Sep 18, 2008 6 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#6 lore raw
Quoted 7 lines · Simon Farnsworth
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines · Andrew Paprocki
Quoted 5 lines

I have an AMD / Award BIOS based system which does not properly shut off when I hold down the power button for 4 seconds. The BIOS is configured to have "Soft-off" set to "Delay for 4 seconds" which is supposed to power the machine off if the button is held that long.

Quoted 5 lines

If you hold it down for 4 or more seconds, the BIOS is supposed to shut the machine down without the OS knowing what's happening (no ACPI events, just a loss of power). From your problem description, the BIOS is noticing *something* about the way Linux sets things up, and *choosing* to reboot instead of cutting the power.

Each MB I know takes about eight seconds of pressing the power button to switch "off". Besides that, having a four-seconds-delay seems rather useless if you'd switch from "0s -> shutdown, 4 s -> hard shutdown" to "0 s -> suspend, 4 s -> hard shutdown". I never tried it myself*, but I'd expect "0 s-> suspend, 4 s -> shutdown, 8 s -> hard shutdown".

If I happen to be correct here, you'd be looking at the wrong side of the correct tree.

*)I'd fail, because I put in a relais, which would cut the power anyway.