Skip to contentSkip to conversation

: unable to configure sound card

ALSA - driver 0001347 [email protected] 1 participant 1 message Aug 17, 2005

lore
Share & tools
lore
#0 lore raw

The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1347>
======================================================================

Reported By:                CptS
Assigned To:                tiwai
======================================================================
Project:                    ALSA - driver
Issue ID:                   1347
Category:                   PCI - nm256
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     assigned
Distribution:               Knoppix 4.0
Kernel Version:             2.6.11
======================================================================
Date Submitted:             08-17-2005 11:05 CEST
Last Modified:              08-17-2005 11:05 CEST

======================================================================
Summary: unable to configure sound card
Description:
I'm having problems configuring my sound card with alsa, here are the details:
the sound card is NeoMagic 256AV (NM2200) located onboard a Compaq Presario 1920.
I'm currently running Knoppix 4.0 hdd installed (kernel 2.6)

here's lspci -vv outputs on the cards:
0000:01:00.1 Multimedia audio controller: Neomagic Corporation NM2200 [MagicMedia 256AV Audio] (rev 20)
Subsystem: Compaq Computer Corporation MagicMedia 256AV Audio
Device on Durango
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f4800000 (32-bit, prefetchable) [size=4M] Region 1: Memory at f4200000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <available only to root>

I wouldn't have addressed you unless I've already tried everything:
I've tried the solution of the same problem regarding HP Omni 4150 with the same card.

I used alsaconf and it tried to load snd-nm256, after loading it crashed, dmesg suggested loading it with force_ac97=1 switch but once i did it the system crashed (on 3 differet linux installations)

I did a legacy scan using alsaconf for all legacy drivers.

I 'modprobe'ed for hours on every imaginable option (ad1848, sb, cs423x, etc..)

I've edited the modules.conf and manually defined the dma and irq

I removed alsa completly and re-install it.

I had debian with 2.4 kernel installed and i've upgraded to 2.6

I changed the distro from debian to Knoppix (kinda same thing but...)

anyway, you get the point..

can you please assist??I'm having problems configuring my sound card with alsa, here are the details:
the sound card is NeoMagic 256AV (NM2200) located onboard a Compaq Presario 1920.
I'm currently running Knoppix 4.0 hdd installed (kernel 2.6)

here's lspci -vv outputs on the cards:
0000:01:00.1 Multimedia audio controller: Neomagic Corporation NM2200 [MagicMedia 256AV Audio] (rev 20)
Subsystem: Compaq Computer Corporation MagicMedia 256AV Audio
Device on Durango
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f4800000 (32-bit, prefetchable) [size=4M] Region 1: Memory at f4200000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <available only to root>

I wouldn't have addressed you unless I've already tried everything:
I've tried the solution of the same problem regarding HP Omni 4150 with the same card.

I used alsaconf and it tried to load snd-nm256, after loading it crashed, dmesg suggested loading it with force_ac97=1 switch but once i did it the system crashed (on 3 differet linux installations)

I did a legacy scan using alsaconf for all legacy drivers.

I 'modprobe'ed for hours on every imaginable option (ad1848, sb, cs423x, etc..)

I've edited the modules.conf and manually defined the dma and irq

I removed alsa completly and re-install it.

I had debian with 2.4 kernel installed and i've upgraded to 2.6

I changed the distro from debian to Knoppix (kinda same thing but...)

anyway, you get the point..

can you please assist??I'm having problems configuring my sound card with alsa, here are the details:
the sound card is NeoMagic 256AV (NM2200) located onboard a Compaq Presario 1920.
I'm currently running Knoppix 4.0 hdd installed (kernel 2.6)

here's lspci -vv outputs on the cards:
0000:01:00.1 Multimedia audio controller: Neomagic Corporation NM2200 [MagicMedia 256AV Audio] (rev 20)
Subsystem: Compaq Computer Corporation MagicMedia 256AV Audio
Device on Durango
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f4800000 (32-bit, prefetchable) [size=4M] Region 1: Memory at f4200000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <available only to root>

I wouldn't have addressed you unless I've already tried everything:
I've tried the solution of the same problem regarding HP Omni 4150 with the same card.

I used alsaconf and it tried to load snd-nm256, after loading it crashed, dmesg suggested loading it with force_ac97=1 switch but once i did it the system crashed (on 3 differet linux installations)

I did a legacy scan using alsaconf for all legacy drivers.

I 'modprobe'ed for hours on every imaginable option (ad1848, sb, cs423x, etc..)

I've edited the modules.conf and manually defined the dma and irq

I removed alsa completly and re-install it.

I had debian with 2.4 kernel installed and i've upgraded to 2.6

I changed the distro from debian to Knoppix (kinda same thing but...)

anyway, you get the point..

can you please assist??
======================================================================

Issue History
Date Modified Username Field Change
======================================================================

08-17-05 11:05 CptS           New Issue                                    
08-17-05 11:05 CptS           Distribution              => Knoppix 4.0     
08-17-05 11:05 CptS           Kernel Version            => 2.6.11          

======================================================================

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf