failover works - but balancing does not
here's the setup (two dsl - same provider)
+-----> link1
LAN----- linux box --| |----------internet
+-----> link2the setup is ok in terms of the failover requirement. the other link takes over when one is down. however, there is a very noticeable lag when both lines are up. i've tried changing the weight value to a higher one but the links are still under utilized and some client machines playing games or mostly disconnected. taking down one link makes the connection ok.
any suggestions? do i need to patch the kernel?
below is the script i'm using on a mandrake 10.1 box.
thanks.
erik
<start of script>
#!/bin/sh
# Iptables userspace executable
IPTABLES="/sbin/iptables"
# Internal Interface
NET_INT_INT=eth1
# Internal IP
NET_INT_IP2.168.0.101
# Internal Subnet
NET_INT_SUB=/24
# Internal Network
NET_INT_NET2.168.0.0
# First external interface
NET_EXT_INT1=eth0
# First external IP
NET_EXT_IP12.168.1.7
# First external interface's gateway
NET_EXT_GW12.168.1.1
# Second external interface
NET_EXT_INT2=eth2
# Second external IP
NET_EXT_IP22.168.1.3
# Second external interface's gateway
NET_EXT_GW22.168.1.1
echo "Flushing All Tables"
$IPTABLES -F
$IPTABLES -F -t nat
$IPTABLES -F -t mangle
$IPTABLES -X -t nat
$IPTABLES -X -t mangle
$IPTABLES -X
$IPTABLES -t mangle -N ETH0
$IPTABLES -t mangle -F ETH0
$IPTABLES -t mangle -A ETH0 -j MARK --set-mark 1
$IPTABLES -t mangle -N ETH2
$IPTABLES -t mangle -F ETH2
$IPTABLES -t mangle -A ETH2 -j MARK --set-mark 2
$IPTABLES -t nat -N SPOOF_ETH0
$IPTABLES -t nat -F SPOOF_ETH0"
$IPTABLES -t nat -A SPOOF_ETH0 -j SNAT --to ${NET_EXT_IP1}
$IPTABLES -t nat -N SPOOF_ETH2
$IPTABLES -t nat -F SPOOF_ETH2H2 "
$IPTABLES -t nat -A SPOOF_ETH2 -j SNAT --to ${NET_EXT_IP2}
echo "Setting some local network rules..."
$IPTABLES -A INPUT -p icmp -s ${NET_INT_NET}/24 -d ${NET_INT_IP} -j ACCEPT
echo "Setting Mangle rules for eth0..."
$IPTABLES -t mangle -A OUTPUT -o ! ${NET_INT_INT} -m random --average 50 -j ETH0 $IPTABLES -t mangle -A PREROUTING -i ${NET_INT_INT} -m random --average 50 -j ETH0
ip ro add table 10 default via ${NET_EXT_GW1} dev ${NET_EXT_INT1} ip ru add fwmark 1 table 10
ip ro fl ca
echo "Setting Mangle rules for eth2..."
$IPTABLES -t mangle -A OUTPUT -o ! ${NET_INT_INT} -m random --average 50 -j ETH2 $IPTABLES -t mangle -A PREROUTING -i ${NET_INT_INT} -m random --average 50 -j ETH2
ip ro add table 20 default via ${NET_EXT_GW2} dev ${NET_EXT_INT2} ip ru add fwmark 2 table 20
ip ro fl ca
echo "Setting up spoofing rules..."
$IPTABLES -t nat -A POSTROUTING -o ${NET_EXT_INT1} -j SPOOF_ETH0 $IPTABLES -t nat -A POSTROUTING -o ${NET_EXT_INT2} -j SPOOF_ETH2
echo "Adding default route..."
ip ro add default nexthop via ${NET_EXT_GW1} dev ${NET_EXT_INT1} weight 1 nexthop via ${NET_EXT_GW2} dev ${NET_EXT_INT2} weight 1
echo "Disabling Reverse Path Filtering..."
echo 0> /proc/sys/net/ipv4/conf/eth0/rp_filter
echo 0> /proc/sys/net/ipv4/conf/eth2/rp_filter
echo "Enabling IPv4 Packet forwarding..."
echo "1"> /proc/sys/net/ipv4/ip_forward
<end of script>
Signature · 9 lines
roderick e. tapang retapang at gmail dot com (o_.' http://counter.li.org/ //\ ---------------------- V_/_ Linux User # 253842 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi!
Quoted 6 lines · roderick tapang
here's the setup (two dsl - same provider)
+-----> link1 LAN----- linux box --| |----------internet +-----> link2
Quoted 7 lines
the setup is ok in terms of the failover requirement. the other link takes over when one is down. however, there is a very noticeable lag when both lines are up. i've tried changing the weight value to a higher one but the links are still under utilized and some client machines playing games or mostly disconnected. taking down one link makes the connection ok.
any suggestions? do i need to patch the kernel?
I was in the situation like yours. Following the lartc howto did not result in correct functionality (not the same problems as yours).
I managed to do it using these links:
http://www.ssi.bg/~ja/nano.txt
http://www.ssi.bg/~ja/#routes
I had to read the nano howto about 5 times to understand it.
Signature · 5 lines
Udv, Nandor _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi,
Can I know how is your failover works? Any additional scripts?
Regards,
ro0ot
Quoted 94 lines · roderick tapang
here's the setup (two dsl - same provider)
+-----> link1 LAN----- linux box --| |----------internet +-----> link2the setup is ok in terms of the failover requirement. the other link takes over when one is down. however, there is a very noticeable lag when both lines are up. i've tried changing the weight value to a higher one but the links are still under utilized and some client machines playing games or mostly disconnected. taking down one link makes the connection ok.
any suggestions? do i need to patch the kernel?below is the script i'm using on a mandrake 10.1 box.
thanks.
erik<start of script>
#!/bin/sh
# Iptables userspace executable
IPTABLES="/sbin/iptables"
# Internal Interface
NET_INT_INT=eth1
# Internal IP
NET_INT_IP2.168.0.101
# Internal Subnet
NET_INT_SUB=/24
# Internal Network
NET_INT_NET2.168.0.0
# First external interface
NET_EXT_INT1=eth0
# First external IP
NET_EXT_IP12.168.1.7
# First external interface's gateway
NET_EXT_GW12.168.1.1
# Second external interface
NET_EXT_INT2=eth2
# Second external IP
NET_EXT_IP22.168.1.3
# Second external interface's gateway
NET_EXT_GW22.168.1.1
echo "Flushing All Tables"
$IPTABLES -F
$IPTABLES -F -t nat
$IPTABLES -F -t mangle
$IPTABLES -X -t nat
$IPTABLES -X -t mangle
$IPTABLES -X$IPTABLES -t mangle -N ETH0
$IPTABLES -t mangle -F ETH0
$IPTABLES -t mangle -A ETH0 -j MARK --set-mark 1$IPTABLES -t mangle -N ETH2
$IPTABLES -t mangle -F ETH2
$IPTABLES -t mangle -A ETH2 -j MARK --set-mark 2$IPTABLES -t nat -N
SPOOF_ETH0
$IPTABLES -t nat -FSPOOF_ETH0"
$IPTABLES -t nat -ASPOOF_ETH0-j SNAT --to ${NET_EXT_IP1}$IPTABLES -t nat -N
SPOOF_ETH2
$IPTABLES -t nat -FSPOOF_ETH2H2"
$IPTABLES -t nat -ASPOOF_ETH2-j SNAT --to ${NET_EXT_IP2}echo "Setting some local network rules..."
$IPTABLES -A INPUT -p icmp -s ${NET_INT_NET}/24 -d ${NET_INT_IP} -j ACCEPTecho "Setting Mangle rules for eth0..."
$IPTABLES -t mangle -A OUTPUT -o ! ${NET_INT_INT} -m random --average 50 -j ETH0 $IPTABLES -t mangle -A PREROUTING -i ${NET_INT_INT} -m random --average 50 -j ETH0
ip ro add table 10 default via ${NET_EXT_GW1} dev ${NET_EXT_INT1} ip ru add fwmark 1 table 10
ip ro fl caecho "Setting Mangle rules for eth2..."
$IPTABLES -t mangle -A OUTPUT -o ! ${NET_INT_INT} -m random --average 50 -j ETH2 $IPTABLES -t mangle -A PREROUTING -i ${NET_INT_INT} -m random --average 50 -j ETH2
ip ro add table 20 default via ${NET_EXT_GW2} dev ${NET_EXT_INT2} ip ru add fwmark 2 table 20
ip ro fl caecho "Setting up spoofing rules..."
$IPTABLES -t nat -A POSTROUTING -o ${NET_EXT_INT1} -jSPOOF_ETH0$IPTABLES -t nat -A POSTROUTING -o ${NET_EXT_INT2} -jSPOOF_ETH2echo "Adding default route..."
ip ro add default nexthop via ${NET_EXT_GW1} dev ${NET_EXT_INT1} weight 1 nexthop via ${NET_EXT_GW2} dev ${NET_EXT_INT2} weight 1
Quoted 10 lines
echo "Disabling Reverse Path Filtering..."
echo 0>/proc/sys/net/ipv4/conf/eth0/rp_filter
echo 0>/proc/sys/net/ipv4/conf/eth2/rp_filterecho "Enabling IPv4 Packet forwarding..."
echo "1">/proc/sys/net/ipv4/ip_forward
<end of script>
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/