New: BUG: soft lockup - CPU#0 stuck
Subsystems (2)
A message that is not in the archive (sent off-list or not yet received): [email protected]/
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 48 lines · On Sat, 22 Mar 2008 06:53:40 -0700 (PDT) [email protected] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id309
Summary: BUG: soft lockup - CPU#0 stuck
Product: Platform Specific/Hardware
Version: 2.5
KernelVersion: 2.6.24.3
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: SPARC64
AssignedTo: [email protected]
ReportedBy: [email protected]Earliest failing kernel version: 2.6.24.3
Distribution: Debian 4.0/Etch Sparc64
Hardware Environment: Sparc64
Problem Description:
During boot of my Sparc64 with a vanille 2.6.24.3 kernel the kernel gets stuck. After while it continues allowing normal use of the machine. The message shown in the kernel logs looks like this:BUG: soft lockup - CPU#0 stuck for 11s! [ifconfig:2408] TSTATE: 0000004480009603 TPC: 0000000010013390 TNPC: 0000000010013394 Y:00000000 Not tainted
TPC: <gem_interrupt+0x14/0xec[sungem]>
g0: 0000000000009000 g1: 0800000000000001 g2: 0000000000000100 g3:
0000000000000400
g4:fffff8003e61c060g5: 0000000000000020 g6:fffff8003e7e8000g7:
0000000000000000
o0: 0000000000000001 o1:fffff8003d090670o2: 0000000000000001 o3:000001fe0000f078
o4:7fffffffffffffffo5: 0000000080000000 sp:fffff8003e7ea341ret_pc:00000000100133bc
RPC: <gem_interrupt+0x40/0xec[sungem]>
l0:fffff8003d090670l1: 0000000000821400 l2:fffff8003e7eaca0l3:
0000000000000400
l4: 0000000000000000 l5: 0000000000000005 l6: 0000000000000000 l7:
0000000000000008
i0: 0000000000000009 i1:fffff8003d090620i2:000000001c2245fai3:000000000000000c
i4:7fffffffffffffffi5: 0000000000000000 i6:fffff8003e7ea401i7:000000000047e974
I7: <handle_IRQ_event+0x34/0x74>
Quoted 9 lines
It appartently has to do with the network (ifconfig) although I'm not 100%. I tried changing several settings in the kernel (to many to write down here) but all give the same result.
Steps to reproduce:
- Build a 2.6.24.3 for Sparc64
- Boot a SUN Sparc64 machine with this kernel
- System gets stuck during boot but after a while it continues its boot.
I expect it would be useful if you tell us the latest version of the kernel on which this didn't happen. ie: what kernel version were you running before you "up"graded to 2.6.24?
Thanks.