Skip to contentSkip to conversation

New: Changing the kernel image type (e.g. zImage to uImage) does not take effect immediately

Buildroot bugzilla at busybox.net 1 participant 3 messages Nov 19, 2017

lore
Share & tools
lore
#0 lore raw

https://bugs.busybox.net/show_bug.cgi?id=10506

Bug ID: 10506
Summary: Changing the kernel image type (e.g. zImage to uImage)
does not take effect immediately
Product: buildroot
Version: 2017.02.5
Hardware: All
OS: Linux
Status: NEW
Severity: minor
Priority: P5
Component: Other
Assignee: unassigned at buildroot.uclibc.org
Reporter: gmichael225 at gmail.com
CC: buildroot at uclibc.org
Target Milestone: ---

I may be missing something, but when I:

- complete a build by running "make", then
- change the kernel image type from zImage from uImage, or from uImage to
zImage, then
- run "make" again

the newly requested image type is not created.

Running "make clean", before "make" does cause the image to be created (but obviously that's a lot of recompiling!)

Signature · 2 lines
You are receiving this mail because:
You are on the CC list for the bug.
#1 lore raw

[Buildroot] [Bug 10506] Changed kernel image type (e.g. zImage to uImage) does not build on next "make"

https://bugs.busybox.net/show_bug.cgi?id=10506

gmichael225 at gmail.com changed:

What |Removed |Added
----------------------------------------------------------------------------

            Summary|Changing the kernel image   |Changed kernel image type
                   |type (e.g. zImage to        |(e.g. zImage to uImage)
                   |uImage) does not take       |does not build on next
                   |effect immediately          |"make"
Signature · 2 lines
You are receiving this mail because:
You are on the CC list for the bug.
#2 lore raw

[Buildroot] [Bug 10506] Changed kernel image type (e.g. zImage to uImage) does not build on next "make"

In reply to bugzilla at busybox.net

https://bugs.busybox.net/show_bug.cgi?id=10506

Arnout Vandecappelle <[email protected]> changed:

What |Removed |Added
----------------------------------------------------------------------------

             Status|NEW                         |RESOLVED
         Resolution|---                         |WONTFIX

--- Comment #1 from Arnout Vandecappelle <[email protected]> --- Buildroot doesn't automatically rebuild when you change the configuration. Ideally you should indeed to a clean rebuild (i.e. 'make clean; make'). Sometimes you may get away with a shortcut. In this specific case, 'make linux-rebuild' will do the job.

Signature · 2 lines
You are receiving this mail because:
You are on the CC list for the bug.