New: Delay on boot: fails to IDENTIFY ata2.01 (I/O error, err_mask=0x1)
http://bugzilla.kernel.org/show_bug.cgi?id=11015
Summary: Delay on boot: fails to IDENTIFY ata2.01 (I/O error,
err_mask=0x1)
Product: IO/Storage
Version: 2.5
KernelVersion: 2.6.25.6
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: IDE
AssignedTo: [email protected]
ReportedBy: [email protected]Latest working kernel version: 2.6.24
Earliest failing kernel version: 2.6.25.4
Distribution: Arch Linux
Hardware Environment: asus a7n8x-x motherboard with nforce2 chipset
Problem Description:
The boot process is delayed (three tries, ~20 seconds) when identifying ata2 devices. The boot then continues normally. The problem occured when Arch was switching from the 2.6.24 basekernel to 2.6.25.
Initially reported on bugs.archlinux.org, but rejected as an upstream bug.
Relevant section of dmesg:
SCSI subsystem initialized
libata version 3.00 loaded.pata_amd 0000:00:09.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:09.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata1.00: ATA-6: ST3120026A, 3.06, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48
ata1.01: ATA-7: Maxtor 6B300R0, BAH41B10, max UDMA/133 ata1.01: 586114704 sectors, multi 16: LBA48
ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c7c000) ACPI=0x3f01f (20:15:0x1f)
ata1: nv_mode_filter: 0x7f39f&0x7f01f->0x7f01f, BIOS=0x7f000 (0xc6c7c000) ACPI=0x7f01f (20:15:0x1f)
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/133
ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1)
ata2: failed to recover some devices, retrying in 5 secs
ieee1394: Host added: ID:BUS[0-01:1023] GUID[00023c002105b2d9] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1)
ata2: failed to recover some devices, retrying in 5 secs ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1)
ata2: failed to recover some devices, retrying in 5 secs
ata2.00: ATAPI: SONY CD-RW CRX160E, 1.0e, max UDMA/33
ata2: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc6c7c000) ACPI=0x701f (60:600:0x13)
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA ST3120026A 3.06 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access ATA Maxtor 6B300R0 BAH4 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM SONY CD-RW CRX160E 1.0e PQ: 0 ANSI: 5
Steps to reproduce: reboot
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee.
[Bug 11015] Delay on boot: fails to IDENTIFY ata2.01 (I/O error, err_mask=0x1)
http://bugzilla.kernel.org/show_bug.cgi?id=11015
[email protected] changed:
What |Removed |Added
----------------------------------------------------------------------------
AssignedTo|[email protected] |[email protected] Status|NEW |ASSIGNED
------- Comment #1 from [email protected] 2008-07-01 01:31 ------- Reassigning to the right component (libata).
Signature · 4 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. You are the assignee for the bug, or are watching the assignee.