New: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 47 lines · On Wed, 20 Aug 2008 17:38:59 -0700 (PDT) [email protected] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id=11388
Summary: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of
memory is usable
Product: Memory Management
Version: 2.5
KernelVersion: 2.6.27-rc3
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: MTTR
AssignedTo: [email protected]
ReportedBy: [email protected]Latest working kernel version: 2.4.24.2 (possibly later) Earliest failing kernel version: 2.6.27-rc3-21328-ga7f5aaf (from netdev-2.6)
Distribution: Gentoo
Hardware Environment: 2x Intel X5482
Software Environment:
Problem Description:[ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13056MB of RAM. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1561 mtrr_trim_uncached_memory+0x508/0x550() [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc3-21328-ga7f5aaf #8 [ 0.000000] [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80234c3e>] warn_on_slowpath+0x51/0x77 [ 0.000000] [<ffffffff8023570a>] printk+0x4e/0x56 [ 0.000000] [<ffffffff803add02>] sort+0xfa/0x18c [ 0.000000] [<ffffffff808283d3>] cmp_range+0x0/0x6 [ 0.000000] [<ffffffff80828a47>] mtrr_trim_uncached_memory+0x508/0x550 [ 0.000000] [<ffffffff802178e1>] post_set+0x20/0x3d [ 0.000000] [<ffffffff80824f99>] setup_arch+0x39d/0x6be [ 0.000000] [<ffffffff8081e962>] start_kernel+0x74/0x341 [ 0.000000] [<ffffffff8081e394>] x86_64_start_kernel+0xe3/0xe7 [ 0.000000] [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
Quoted 4 lines
Steps to reproduce:
This warning isn't present under 2.6.24.2 and the full range of physical memory is usable.
Looks like a post-2.6.26 regression caused by12031a624af7816ec7660b82be648aa3703b4ebe.
Quoted 54 lines · Andrew Morton
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 47 lines · On Wed, 20 Aug 2008 17:38:59 -0700 (PDT) [email protected] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id=11388
Summary: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of
memory is usable
Product: Memory Management
Version: 2.5
KernelVersion: 2.6.27-rc3
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: MTTR
AssignedTo: [email protected]
ReportedBy: [email protected]Latest working kernel version: 2.4.24.2 (possibly later) Earliest failing kernel version: 2.6.27-rc3-21328-ga7f5aaf (from netdev-2.6)
Distribution: Gentoo
Hardware Environment: 2x Intel X5482
Software Environment:
Problem Description:[ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13056MB of RAM. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1561 mtrr_trim_uncached_memory+0x508/0x550() [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc3-21328-ga7f5aaf #8 [ 0.000000] [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80234c3e>] warn_on_slowpath+0x51/0x77 [ 0.000000] [<ffffffff8023570a>] printk+0x4e/0x56 [ 0.000000] [<ffffffff803add02>] sort+0xfa/0x18c [ 0.000000] [<ffffffff808283d3>] cmp_range+0x0/0x6 [ 0.000000] [<ffffffff80828a47>] mtrr_trim_uncached_memory+0x508/0x550 [ 0.000000] [<ffffffff802178e1>] post_set+0x20/0x3d [ 0.000000] [<ffffffff80824f99>] setup_arch+0x39d/0x6be [ 0.000000] [<ffffffff8081e962>] start_kernel+0x74/0x341 [ 0.000000] [<ffffffff8081e394>] x86_64_start_kernel+0xe3/0xe7 [ 0.000000] [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
Quoted 7 lines
Quoted 4 lines
Steps to reproduce:
This warning isn't present under 2.6.24.2 and the full range of physical memory is usable.
Looks like a post-2.6.26 regression caused by
12031a624af7816ec7660b82be648aa3703b4ebe.
reg00: base=0xd0000000 (3328MB), size=196864MB: uncachable, count=1
reg01: base=0xe0000000 (3584MB), size=197120MB: uncachable, count=1
reg02: base=0x00000000 ( 0MB), size=212992MB: write-back, count=1
reg03: base=0x400000000 (16384MB), size=197120MB: write-back, count=1
reg04: base=0x420000000 (16896MB), size=196864MB: write-back, count=1
the size mtrr looks crazy.
YH
Quoted 63 lines · Yinghai Lu
Quoted 54 lines · Andrew Morton
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 47 lines · On Wed, 20 Aug 2008 17:38:59 -0700 (PDT) [email protected] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id=11388
Summary: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of
memory is usable
Product: Memory Management
Version: 2.5
KernelVersion: 2.6.27-rc3
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: MTTR
AssignedTo: [email protected]
ReportedBy: [email protected]Latest working kernel version: 2.4.24.2 (possibly later) Earliest failing kernel version: 2.6.27-rc3-21328-ga7f5aaf (from netdev-2.6)
Distribution: Gentoo
Hardware Environment: 2x Intel X5482
Software Environment:
Problem Description:[ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13056MB of RAM. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1561 mtrr_trim_uncached_memory+0x508/0x550() [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc3-21328-ga7f5aaf #8 [ 0.000000] [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80234c3e>] warn_on_slowpath+0x51/0x77 [ 0.000000] [<ffffffff8023570a>] printk+0x4e/0x56 [ 0.000000] [<ffffffff803add02>] sort+0xfa/0x18c [ 0.000000] [<ffffffff808283d3>] cmp_range+0x0/0x6 [ 0.000000] [<ffffffff80828a47>] mtrr_trim_uncached_memory+0x508/0x550 [ 0.000000] [<ffffffff802178e1>] post_set+0x20/0x3d [ 0.000000] [<ffffffff80824f99>] setup_arch+0x39d/0x6be [ 0.000000] [<ffffffff8081e962>] start_kernel+0x74/0x341 [ 0.000000] [<ffffffff8081e394>] x86_64_start_kernel+0xe3/0xe7 [ 0.000000] [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---Quoted 7 lines
Quoted 4 lines
Steps to reproduce:
This warning isn't present under 2.6.24.2 and the full range of physical memory is usable.
Looks like a post-2.6.26 regression caused by
12031a624af7816ec7660b82be648aa3703b4ebe.
Quoted 7 lines
reg00: base=0xd0000000 (3328MB), size=196864MB: uncachable, count=1
reg01: base=0xe0000000 (3584MB), size=197120MB: uncachable, count=1
reg02: base=0x00000000 ( 0MB), size=212992MB: write-back, count=1
reg03: base=0x400000000 (16384MB), size=197120MB: write-back, count=1
reg04: base=0x420000000 (16896MB), size=196864MB: write-back, count=1the size mtrr looks crazy.
please apply attached patch and boot with show_msr=1 to dump the msr (including mtrr)
YH
[PATCH] x86_64: printout msr
commandline show_msr=1 for bsp, show_msr=32 for all 32 cpus.
--- arch/x86/kernel/cpu/common_64.c | 46 ++++++++++++++++++++++++++++++++++++++++ include/asm-x86/msr.h | 23 ++++++++++++++++++++ 2 files changed, 69 insertions(+)
arch/x86/kernel/cpu/common_64.c +46 -0
@@ -430,6 +430,49 @@ static __init int setup_noclflush(char * }__setup ("noclflush" , setup_noclflush); +struct msr_range { +unsigned min; +unsigned max; +}; + +static struct msr_range msr_range_array[]__cpuinitdata = { + {0x00000000 ,0x00000418 }, + {0xc0000000 ,0xc000040b }, + {0xc0010000 ,0xc0010142 }, + {0xc0011000 ,0xc001103b }, +}; + +static void __cpuinit print_cpu_msr (void ) +{ +unsigned index; +u64 val; +int i; +unsigned index_min, index_max; + +for (i =0 ; i <ARRAY_SIZE (msr_range_array); i++) { + index_min = msr_range_array[i].min; + index_max = msr_range_array[i].max; +for (index = index_min; index < index_max; index++) { +if (rdmsrl_amd_safe (index, &val)) +continue ; +printk (KERN_INFO " MSR%08x: %016llx\n" , index, val); + } + } +} + +static int show_msr__cpuinitdata ; +static __init int setup_show_msr (char *arg) +{ +int num; + +get_option (&arg, &num); + +if (num >0 ) + show_msr = num; +return 1 ; +} +__setup ("show_msr=" , setup_show_msr); +void __cpuinit print_cpu_info (struct cpuinfo_x86 *c) {if (c->x86_model_id[0 ])
@@ -439,6 +482,9 @@ void __cpuinit print_cpu_info(struct cpuprintk (KERN_CONT " stepping %02x\n" , c->x86_mask); else printk(KERN_CONT "\n"); + +if (c->cpu_index < show_msr) +print_cpu_msr (); }static __init int setup_disablecpuid (char *arg)
include/asm-x86/msr.h +23 -0
@@ -63,6 +63,22 @@ static inline unsigned long long native_return EAX_EDX_VAL (val, low, high); } +static inline unsigned long long native_read_msr_amd_safe (unsigned int msr, +int *err) +{ +DECLARE_ARGS (val, low, high); + + asm volatile("2: rdmsr ; xor %0,%0\n" + "1:\n\t" + ".section .fixup,\"ax\"\n\t" + "3: mov %3,%0 ; jmp 1b\n\t" + ".previous\n\t" + _ASM_EXTABLE(2b, 3b) + : "=r" (*err), EAX_EDX_RET(val, low, high) + : "c" (msr), "D" (0x9c5a203a), "i" (-EFAULT)); +return EAX_EDX_VAL (val, low, high); +} +static inline void native_write_msr (unsigned int msr,unsigned low,unsigned high) {
@@ -158,6 +174,13 @@ static inline int rdmsrl_safe(unsigned m *p =native_read_msr_safe (msr, &err);return err; } +static inline int rdmsrl_amd_safe (unsigned msr,unsigned long long *p) +{ +int err; + + *p =native_read_msr_amd_safe (msr, &err); +return err; +}#define rdtscl (low) \ ((low) = (u32)native_read_tsc())
Quoted 1 line · Yinghai Lu
[PATCH]
x86_64: printout msr
looks rather useful - added it to tip/x86/debug.
Ingo
Quoted 6 lines · Ingo Molnar
Quoted 1 line · Yinghai Lu
[PATCH]
x86_64: printout msrlooks rather useful - added it to tip/x86/debug.
fails to build with the attached config:
arch/x86/kernel/cpu/common_64.c: In function ‘print_cpu_msr’:arch/x86/kernel/cpu/common_64.c:456: error: implicit declaration of function ‘rdmsrl_amd_safe’ arch/x86/kernel/cpu/common_64.c: In function ‘print_cpu_info’:arch/x86/kernel/cpu/common_64.c:486: error: ‘struct cpuinfo_x86’ has no member named ‘cpu_index’
i realize that this wasnt sent for inclusion, but i think it would make sense to tidy it up and integrate it.
Ingo
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.27-rc4
# Thu Aug 21 13:58:19 2008
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=yCONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y
# CONFIG_KTIME_SCALAR is not set CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_BOOT_ALLOWED3=yCONFIG_BROKEN_BOOT_ALLOWED2=yCONFIG_BROKEN_BOOT_ALLOWED=yCONFIG_BROKEN_BOOT=yCONFIG_BROKEN_BOOT_EUROPE=yCONFIG_BROKEN_BOOT_TITAN=yCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=yCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=20CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_DEVICE is not setCONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not setCONFIG_CGROUP_CPUACCT=yCONFIG_RESOURCE_COUNTERS=yCONFIG_MM_OWNER=yCONFIG_CGROUP_MEM_RES_CTLR=yCONFIG_RELAY=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=y
# CONFIG_IPC_NS is not setCONFIG_USER_NS=yCONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not setCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_FASTBOOT=yCONFIG_SYSCTL=yCONFIG_EMBEDDED=yCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=y
# CONFIG_BUG is not setCONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not setCONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not setCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not setCONFIG_EVENTFD=y
# CONFIG_SHMEM is not setCONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not setCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_HAVE_OPROFILE=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
# CONFIG_HAVE_CLK is not setCONFIG_HAVE_DYN_ARRAY=yCONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_RT_MUTEXES=yCONFIG_TINY_SHMEM=yCONFIG_BASE_SMALL=1
# CONFIG_MODULES is not setCONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not setCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not setCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_PREEMPT_NOTIFIERS=yCONFIG_CLASSIC_RCU=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP_SUPPORT is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=yCONFIG_UP_WANTED_1=yCONFIG_UP_WANTED_2=yCONFIG_UP_WANTED=yCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set CONFIG_PARAVIRT_GUEST=yCONFIG_XEN=yCONFIG_XEN_MAX_DOMAIN_MEMORY=32 CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set CONFIG_KVM_CLOCK=yCONFIG_KVM_GUEST=yCONFIG_PARAVIRT=yCONFIG_PARAVIRT_CLOCK=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=yCONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=128 CONFIG_X86_INTERNODE_CACHE_BYTES=128 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_WP_WORKS_OK=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_X86_DS is not set CONFIG_PROCESSOR_SELECT=y CONFIG_CPU_SUP_INTEL_64=y CONFIG_CPU_SUP_AMD_64=y CONFIG_CPU_SUP_CENTAUR_64=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=yCONFIG_CALGARY_IOMMU=y
# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set CONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=yCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not setCONFIG_I8K=yCONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set CONFIG_X86_CPUID=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y
#
# Memory hotplug is currently incompatible with Software Suspend #CONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_RESOURCES_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_MMU_NOTIFIER=yCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=yCONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000CONFIG_RELOCATABLE=yCONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_COMPAT_VDSO is not setCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE=""CONFIG_CMDLINE_OVERRIDE=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_PM=yCONFIG_PM_DEBUG=yCONFIG_PM_VERBOSE=yCONFIG_CAN_PM_TRACE=yCONFIG_PM_TRACE=yCONFIG_PM_TRACE_RTC=yCONFIG_PM_SLEEP=y
# CONFIG_SUSPEND is not setCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""
# CONFIG_ACPI is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#CONFIG_X86_POWERNOW_K8=yCONFIG_X86_P4_CLOCKMOD=y
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=y # CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not setCONFIG_PCIEASPM=yCONFIG_PCIEASPM_DEBUG=yCONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not setCONFIG_PCI_LEGACY=y
# CONFIG_HT_IRQ is not setCONFIG_ISA_DMA_API=yCONFIG_K8_NB=yCONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not setCONFIG_PCMCIA=yCONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_PCMCIA_IOCTL is not setCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=y
# CONFIG_YENTA_O2 is not setCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=yCONFIG_PD6729=y
# CONFIG_I82092 is not setCONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_BINFMT_MISC=yCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_NET=y
#
# Networking options
#CONFIG_NET_NS=y
# CONFIG_PACKET is not setCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=yCONFIG_XFRM_SUB_POLICY=y CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not setCONFIG_INET=yCONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set CONFIG_IP_PIMSM_V2=yCONFIG_ARPD=yCONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not set
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set CONFIG_TCP_CONG_HYBLA=y CONFIG_TCP_CONG_VEGAS=y CONFIG_TCP_CONG_SCALABLE=y CONFIG_TCP_CONG_LP=yCONFIG_TCP_CONG_VENO=yCONFIG_TCP_CONG_YEAH=y CONFIG_TCP_CONG_ILLINOIS=y CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not setCONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set CONFIG_INET6_ESP=yCONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set CONFIG_INET6_XFRM_TUNNEL=y CONFIG_INET6_TUNNEL=y CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=y CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not setCONFIG_STP=yCONFIG_GARP=yCONFIG_BRIDGE=yCONFIG_VLAN_8021Q=yCONFIG_VLAN_8021Q_GVRP=yCONFIG_DECNET=yCONFIG_DECNET_ROUTER=yCONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not setCONFIG_ATALK=yCONFIG_DEV_APPLETALK=y
# CONFIG_IPDDP is not setCONFIG_X25=yCONFIG_LAPB=yCONFIG_ECONET=yCONFIG_ECONET_AUNUDP=yCONFIG_ECONET_NATIVE=yCONFIG_WAN_ROUTER=yCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not setCONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not setCONFIG_NET_SCH_PRIO=yCONFIG_NET_SCH_RED=y
# CONFIG_NET_SCH_SFQ is not setCONFIG_NET_SCH_TEQL=y
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not setCONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not set
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not setCONFIG_NET_CLS_ROUTE4=yCONFIG_NET_CLS_ROUTE=y
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not setCONFIG_NET_CLS_RSVP=y
# CONFIG_NET_CLS_RSVP6 is not setCONFIG_NET_CLS_FLOW=yCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=yCONFIG_NET_EMATCH_NBYTE=yCONFIG_NET_EMATCH_U32=yCONFIG_NET_EMATCH_META=y
# CONFIG_NET_EMATCH_TEXT is not set
# CONFIG_NET_CLS_ACT is not setCONFIG_NET_SCH_FIFO=y
#
# Network testing
#CONFIG_NET_PKTGEN=yCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=yCONFIG_AX25_DAMA_SLAVE=yCONFIG_NETROM=yCONFIG_ROSE=y
#
# AX.25 network device drivers
#CONFIG_MKISS=yCONFIG_6PACK=yCONFIG_BPQETHER=yCONFIG_BAYCOM_SER_FDX=y
# CONFIG_BAYCOM_SER_HDX is not set
# CONFIG_BAYCOM_PAR is not setCONFIG_YAM=yCONFIG_CAN=y
# CONFIG_CAN_RAW is not set
# CONFIG_CAN_BCM is not set
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=y
# CONFIG_CAN_DEBUG_DEVICES is not setCONFIG_IRDA=y
#
# IrDA protocols
#
# CONFIG_IRLAN is not setCONFIG_IRNET=yCONFIG_IRCOMM=yCONFIG_IRDA_ULTRA=y
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not setCONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=y
#
# Dongle support
#CONFIG_DONGLE=yCONFIG_ESI_DONGLE=y
# CONFIG_ACTISYS_DONGLE is not set
# CONFIG_TEKRAM_DONGLE is not setCONFIG_TOIM3232_DONGLE=y
# CONFIG_LITELINK_DONGLE is not setCONFIG_MA600_DONGLE=y
# CONFIG_GIRBIL_DONGLE is not setCONFIG_MCP2120_DONGLE=yCONFIG_OLD_BELKIN_DONGLE=y
# CONFIG_ACT200L_DONGLE is not setCONFIG_KINGSUN_DONGLE=yCONFIG_KSDAZZLE_DONGLE=yCONFIG_KS959_DONGLE=y
#
# FIR device drivers
#CONFIG_USB_IRDA=y
# CONFIG_SIGMATEL_FIR is not setCONFIG_NSC_FIR=y
# CONFIG_WINBOND_FIR is not setCONFIG_SMC_IRCC_FIR=y
# CONFIG_ALI_FIR is not setCONFIG_VLSI_FIR=yCONFIG_VIA_FIR=yCONFIG_MCS_FIR=yCONFIG_BT=yCONFIG_BT_L2CAP=y
# CONFIG_BT_SCO is not set
# CONFIG_BT_RFCOMM is not setCONFIG_BT_BNEP=y
# CONFIG_BT_BNEP_MC_FILTER is not setCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=yCONFIG_BT_HCIBTSDIO=yCONFIG_BT_HCIUART=yCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not setCONFIG_BT_HCIBCM203X=yCONFIG_BT_HCIBPA10X=yCONFIG_BT_HCIBFUSB=yCONFIG_BT_HCIDTL1=y
# CONFIG_BT_HCIBT3C is not setCONFIG_BT_HCIBLUECARD=yCONFIG_BT_HCIBTUART=yCONFIG_BT_HCIVHCI=y
# CONFIG_AF_RXRPC is not setCONFIG_FIB_RULES=y
#
# Wireless
#CONFIG_CFG80211=yCONFIG_NL80211=yCONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not setCONFIG_IEEE80211=yCONFIG_IEEE80211_DEBUG=yCONFIG_IEEE80211_CRYPT_WEP=yCONFIG_IEEE80211_CRYPT_CCMP=yCONFIG_IEEE80211_CRYPT_TKIP=y
# CONFIG_RFKILL is not setCONFIG_NET_9P=y
# CONFIG_NET_9P_VIRTIO is not setCONFIG_NET_9P_DEBUG=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not setCONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not setCONFIG_MTD=y
# CONFIG_MTD_DEBUG is not setCONFIG_MTD_CONCAT=yCONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not setCONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=yCONFIG_MTD_BLKDEVS=yCONFIG_MTD_BLOCK=yCONFIG_FTL=y
# CONFIG_NFTL is not set
# CONFIG_INFTL is not setCONFIG_RFD_FTL=y
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=yCONFIG_MTD_JEDECPROBE=yCONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not setCONFIG_MTD_CFI_INTELEXT=yCONFIG_MTD_CFI_AMDSTD=yCONFIG_MTD_CFI_STAA=yCONFIG_MTD_CFI_UTIL=yCONFIG_MTD_RAM=yCONFIG_MTD_ROM=yCONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not setCONFIG_MTD_PHYSMAP=yCONFIG_MTD_PHYSMAP_START=0x8000000CONFIG_MTD_PHYSMAP_LEN=0CONFIG_MTD_PHYSMAP_BANKWIDTH=2CONFIG_MTD_SC520CDP=yCONFIG_MTD_NETSC520=y
# CONFIG_MTD_TS5500 is not setCONFIG_MTD_AMD76XROM=y
# CONFIG_MTD_ICHXROM is not setCONFIG_MTD_ESB2ROM=yCONFIG_MTD_CK804XROM=yCONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=y
# CONFIG_MTD_DILNETPC is not set
# CONFIG_MTD_L440GX is not setCONFIG_MTD_INTEL_VR_NOR=yCONFIG_MTD_PLATRAM=y
#
# Self-contained MTD device drivers
#CONFIG_MTD_PMC551=yCONFIG_MTD_PMC551_BUGFIX=yCONFIG_MTD_PMC551_DEBUG=yCONFIG_MTD_DATAFLASH=yCONFIG_MTD_M25P80=yCONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not setCONFIG_MTD_PHRAM=yCONFIG_MTD_MTDRAM=yCONFIG_MTDRAM_TOTAL_SIZE=4096CONFIG_MTDRAM_ERASE_SIZE=128CONFIG_MTDRAM_ABS_POS=0
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#CONFIG_MTD_DOC2000=y
# CONFIG_MTD_DOC2001 is not setCONFIG_MTD_DOC2001PLUS=yCONFIG_MTD_DOCPROBE=yCONFIG_MTD_DOCECC=yCONFIG_MTD_DOCPROBE_ADVANCED=yCONFIG_MTD_DOCPROBE_ADDRESS=0x0000CONFIG_MTD_DOCPROBE_HIGH=yCONFIG_MTD_DOCPROBE_55AA=yCONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not setCONFIG_MTD_NAND_ECC_SMC=yCONFIG_MTD_NAND_MUSEUM_IDS=yCONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not setCONFIG_MTD_NAND_CAFE=y
# CONFIG_MTD_NAND_NANDSIM is not setCONFIG_MTD_NAND_PLATFORM=yCONFIG_MTD_ALAUDA=y
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#CONFIG_MTD_UBI=yCONFIG_MTD_UBI_WL_THRESHOLD=4096CONFIG_MTD_UBI_BEB_RESERVE=1CONFIG_MTD_UBI_GLUEBI=y
#
# UBI debugging options
#CONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_SERIAL=yCONFIG_PARPORT_PC_FIFO=yCONFIG_PARPORT_PC_SUPERIO=yCONFIG_PARPORT_PC_PCMCIA=y
# CONFIG_PARPORT_GSC is not setCONFIG_PARPORT_AX88796=yCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=yCONFIG_PARIDE=y
#
# Parallel IDE high-level drivers
#CONFIG_PARIDE_PD=y
# CONFIG_PARIDE_PCD is not setCONFIG_PARIDE_PF=y
# CONFIG_PARIDE_PT is not setCONFIG_PARIDE_PG=y
#
# Parallel IDE protocol modules
#CONFIG_PARIDE_ATEN=yCONFIG_PARIDE_BPCK=yCONFIG_PARIDE_COMM=yCONFIG_PARIDE_DSTR=y
# CONFIG_PARIDE_FIT2 is not setCONFIG_PARIDE_FIT3=yCONFIG_PARIDE_EPAT=yCONFIG_PARIDE_EPATC8=y
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not setCONFIG_PARIDE_FRPW=yCONFIG_PARIDE_KBIC=yCONFIG_PARIDE_KTTI=y
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not setCONFIG_BLK_CPQ_DA=yCONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not setCONFIG_BLK_DEV_DAC960=yCONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=yCONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_XIP=yCONFIG_CDROM_PKTCDVD=yCONFIG_CDROM_PKTCDVD_BUFFERS=8CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XEN_BLKDEV_FRONTEND is not setCONFIG_VIRTIO_BLK=yCONFIG_BLK_DEV_HD=y
# CONFIG_MISC_DEVICES is not setCONFIG_TIFM_CORE=yCONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not setCONFIG_CHR_DEV_OSST=yCONFIG_BLK_DEV_SR=yCONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not setCONFIG_CHR_DEV_SCH=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=yCONFIG_SCSI_FC_TGT_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SRP_ATTRS=yCONFIG_SCSI_SRP_TGT_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not setCONFIG_SCSI_LOWLEVEL_PCMCIA=yCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not setCONFIG_SCSI_DH_EMC=yCONFIG_SCSI_DH_ALUA=y
# CONFIG_ATA is not setCONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_LINEAR=yCONFIG_MD_RAID0=yCONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not setCONFIG_MD_RAID456=yCONFIG_MD_RAID5_RESHAPE=yCONFIG_MD_MULTIPATH=y
# CONFIG_MD_FAULTY is not setCONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not setCONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not setCONFIG_DM_MIRROR=yCONFIG_DM_ZERO=yCONFIG_DM_MULTIPATH=yCONFIG_DM_DELAY=y
# CONFIG_DM_UEVENT is not setCONFIG_FUSION=y
# CONFIG_FUSION_SPI is not setCONFIG_FUSION_FC=yCONFIG_FUSION_SAS=yCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=yCONFIG_FUSION_LAN=yCONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing #CONFIG_FIREWIRE=yCONFIG_FIREWIRE_OHCI=yCONFIG_FIREWIRE_OHCI_DEBUG=yCONFIG_FIREWIRE_SBP2=yCONFIG_IEEE1394=yCONFIG_IEEE1394_OHCI1394=y
# CONFIG_IEEE1394_PCILYNX is not setCONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=y
# CONFIG_IEEE1394_RAWIO is not set CONFIG_IEEE1394_VIDEO1394=yCONFIG_IEEE1394_DV1394=yCONFIG_IEEE1394_VERBOSEDEBUG=yCONFIG_I2O=yCONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not setCONFIG_I2O_CONFIG=y
# CONFIG_I2O_CONFIG_OLD_IOCTL is not setCONFIG_I2O_BUS=y
# CONFIG_I2O_BLOCK is not setCONFIG_I2O_SCSI=y
# CONFIG_I2O_PROC is not set
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=yCONFIG_DUMMY=yCONFIG_BONDING=yCONFIG_MACVLAN=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not setCONFIG_VETH=yCONFIG_ARCNET=yCONFIG_ARCNET_1201=y
# CONFIG_ARCNET_1051 is not setCONFIG_ARCNET_RAW=yCONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
# CONFIG_ARCNET_COM90xxIO is not setCONFIG_ARCNET_RIM_I=yCONFIG_ARCNET_COM20020=y
# CONFIG_ARCNET_COM20020_PCI is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not setCONFIG_QSEMI_PHY=yCONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not setCONFIG_VITESSE_PHY=yCONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not setCONFIG_ICPLUS_PHY=yCONFIG_REALTEK_PHY=y
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not setCONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=yCONFIG_SUNGEM=y
# CONFIG_CASSINI is not setCONFIG_NET_VENDOR_3COM=yCONFIG_VORTEX=y
# CONFIG_TYPHOON is not setCONFIG_ENC28J60=yCONFIG_ENC28J60_WRITEVERIFY=y
# CONFIG_NET_TULIP is not setCONFIG_HP100=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not setCONFIG_NET_PCI=yCONFIG_PCNET32=yCONFIG_AMD8111_ETH=y
# CONFIG_ADAPTEC_STARFIRE is not setCONFIG_B44=yCONFIG_B44_PCI_AUTOSELECT=yCONFIG_B44_PCICORE_AUTOSELECT=yCONFIG_B44_PCI=y
# CONFIG_FORCEDETH is not setCONFIG_EEPRO100=yCONFIG_E100=yCONFIG_FEALNX=y
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not setCONFIG_8139CP=yCONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not setCONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not setCONFIG_SIS900=y
# CONFIG_EPIC100 is not setCONFIG_SUNDANCE=yCONFIG_SUNDANCE_MMIO=yCONFIG_TLAN=y
# CONFIG_VIA_RHINE is not setCONFIG_SC92031=yCONFIG_NET_POCKET=yCONFIG_ATP=yCONFIG_DE600=yCONFIG_DE620=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not setCONFIG_TR=yCONFIG_IBMOL=yCONFIG_3C359=y
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
#CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not setCONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not setCONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not setCONFIG_USB_NET_CDCETHER=yCONFIG_USB_NET_DM9601=yCONFIG_USB_NET_GL620A=yCONFIG_USB_NET_NET1080=yCONFIG_USB_NET_PLUSB=y
# CONFIG_USB_NET_MCS7830 is not setCONFIG_USB_NET_RNDIS_HOST=yCONFIG_USB_NET_CDC_SUBSET=yCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=y
# CONFIG_NET_PCMCIA is not setCONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_DLCI is not setCONFIG_WAN_ROUTER_DRIVERS=y
# CONFIG_CYCLADES_SYNC is not setCONFIG_LAPBETHER=y
# CONFIG_X25_ASY is not setCONFIG_SBNI=y
# CONFIG_SBNI_MULTILINE is not setCONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not setCONFIG_PLIP=yCONFIG_PPP=yCONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not setCONFIG_PPP_ASYNC=yCONFIG_PPP_SYNC_TTY=yCONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not setCONFIG_PPP_MPPE=y
# CONFIG_PPPOE is not setCONFIG_PPPOL2TP=y
# CONFIG_SLIP is not setCONFIG_SLHC=yCONFIG_NET_FC=yCONFIG_NETCONSOLE=yCONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not setCONFIG_NET_POLL_CONTROLLER=yCONFIG_VIRTIO_NET=yCONFIG_ISDN=yCONFIG_ISDN_I4L=y
# CONFIG_ISDN_PPP is not setCONFIG_ISDN_AUDIO=y
# CONFIG_ISDN_TTY_FAX is not set
# CONFIG_ISDN_X25 is not set
#
# ISDN feature submodules
#CONFIG_ISDN_DRV_LOOP=y
# CONFIG_ISDN_DIVERSION is not set
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
#
# Active cards
#CONFIG_ISDN_DRV_GIGASET=yCONFIG_GIGASET_BASE=yCONFIG_GIGASET_M105=y
# CONFIG_GIGASET_M101 is not setCONFIG_GIGASET_DEBUG=y
# CONFIG_GIGASET_UNDOCREQ is not set
# CONFIG_ISDN_CAPI is not setCONFIG_PHONE=y
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not setCONFIG_INPUT_EVDEV=yCONFIG_INPUT_EVBUG=yCONFIG_XEN_KBDDEV_FRONTEND=y
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not setCONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not setCONFIG_KEYBOARD_STOWAWAY=yCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=yCONFIG_MOUSE_PS2_TOUCHKIT=yCONFIG_MOUSE_SERIAL=yCONFIG_MOUSE_APPLETOUCH=yCONFIG_MOUSE_BCM5974=yCONFIG_MOUSE_VSXXXAA=yCONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not setCONFIG_JOYSTICK_A3D=y
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not setCONFIG_JOYSTICK_GRIP=y
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not setCONFIG_JOYSTICK_INTERACT=yCONFIG_JOYSTICK_SIDEWINDER=yCONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not setCONFIG_JOYSTICK_MAGELLAN=yCONFIG_JOYSTICK_SPACEORB=yCONFIG_JOYSTICK_SPACEBALL=yCONFIG_JOYSTICK_STINGER=y
# CONFIG_JOYSTICK_TWIDJOY is not setCONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_DB9 is not setCONFIG_JOYSTICK_GAMECON=yCONFIG_JOYSTICK_TURBOGRAFX=y
# CONFIG_JOYSTICK_JOYDUMP is not setCONFIG_JOYSTICK_XPAD=yCONFIG_JOYSTICK_XPAD_FF=yCONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not setCONFIG_TABLET_USB_AIPTEK=yCONFIG_TABLET_USB_GTCO=yCONFIG_TABLET_USB_KBTAB=y
# CONFIG_TABLET_USB_WACOM is not setCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_ADS7846=yCONFIG_TOUCHSCREEN_FUJITSU=yCONFIG_TOUCHSCREEN_GUNZE=y
# CONFIG_TOUCHSCREEN_ELO is not setCONFIG_TOUCHSCREEN_MTOUCH=yCONFIG_TOUCHSCREEN_INEXIO=yCONFIG_TOUCHSCREEN_MK712=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not setCONFIG_TOUCHSCREEN_UCB1400=y
# CONFIG_TOUCHSCREEN_WM97XX is not setCONFIG_TOUCHSCREEN_USB_COMPOSITE=y
# CONFIG_TOUCHSCREEN_USB_EGALAX is not setCONFIG_TOUCHSCREEN_USB_PANJIT=yCONFIG_TOUCHSCREEN_USB_3M=yCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=y
# CONFIG_TOUCHSCREEN_USB_GUNZE is not setCONFIG_TOUCHSCREEN_USB_DMC_TSC10=yCONFIG_TOUCHSCREEN_USB_IRTOUCH=yCONFIG_TOUCHSCREEN_USB_IDEALTEK=yCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
# CONFIG_TOUCHSCREEN_USB_GOTOP is not setCONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=yCONFIG_SERIO_CT82C710=yCONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not setCONFIG_GAMEPORT=yCONFIG_GAMEPORT_NS558=yCONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_DEVKMEM=yCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not setCONFIG_CYCLADES=yCONFIG_CYZ_INTR=yCONFIG_DIGIEPCA=yCONFIG_MOXA_INTELLIO=y
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not setCONFIG_SYNCLINKMP=y
# CONFIG_SYNCLINK_GT is not setCONFIG_N_HDLC=yCONFIG_RISCOM8=yCONFIG_SPECIALIX=y
# CONFIG_SX is not setCONFIG_RIO=y
# CONFIG_RIO_OLDPCI is not setCONFIG_STALDRV=yCONFIG_STALLION=yCONFIG_NOZOMI=y
#
# Serial drivers
#CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not setCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_CS=yCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_JSM=y
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not setCONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not setCONFIG_HVC_DRIVER=yCONFIG_HVC_IRQ=yCONFIG_HVC_XEN=yCONFIG_VIRTIO_CONSOLE=yCONFIG_IPMI_HANDLER=yCONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not setCONFIG_IPMI_DEVICE_INTERFACE=yCONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not setCONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not setCONFIG_NVRAM=yCONFIG_R3964=yCONFIG_APPLICOM=y
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not setCONFIG_CARDMAN_4000=yCONFIG_CARDMAN_4040=y
# CONFIG_IPWIRELESS is not setCONFIG_MWAVE=y
CONFIG_PC8736x_GPIO=yCONFIG_NSC_GPIO=yCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=256CONFIG_HANGCHECK_TIMER=yCONFIG_TCG_TPM=yCONFIG_TCG_NSC=yCONFIG_TCG_ATMEL=yCONFIG_TELCLOCK=yCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not setCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=yCONFIG_I2C_ALI1563=yCONFIG_I2C_ALI15X3=yCONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not setCONFIG_I2C_ISCH=yCONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not setCONFIG_I2C_SIS5595=yCONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not setCONFIG_I2C_VIAPRO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_OCORES=yCONFIG_I2C_SIMTEC=y
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_PARPORT=y
# CONFIG_I2C_PARPORT_LIGHT is not setCONFIG_I2C_TAOS_EVM=yCONFIG_I2C_TINY_USB=y
#
# Graphics adapter I2C/DDC channel drivers
#CONFIG_I2C_VOODOO3=y
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_PCA_PLATFORM=y
#
# Miscellaneous I2C Chip support
#CONFIG_DS1682=y
# CONFIG_SENSORS_EEPROM is not setCONFIG_SENSORS_PCF8574=yCONFIG_PCF8575=yCONFIG_SENSORS_PCA9539=yCONFIG_SENSORS_PCF8591=y
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not setCONFIG_I2C_DEBUG_ALGO=yCONFIG_I2C_DEBUG_BUS=yCONFIG_I2C_DEBUG_CHIP=yCONFIG_SPI=yCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=yCONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_LM70_LLP is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not setCONFIG_W1=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=yCONFIG_W1_MASTER_DS2490=yCONFIG_W1_MASTER_DS2482=y
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not setCONFIG_W1_SLAVE_DS2433=yCONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not setCONFIG_THERMAL=yCONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not setCONFIG_ACQUIRE_WDT=yCONFIG_ADVANTECH_WDT=y
# CONFIG_ALIM1535_WDT is not setCONFIG_ALIM7101_WDT=yCONFIG_SC520_WDT=yCONFIG_EUROTECH_WDT=yCONFIG_IB700_WDT=yCONFIG_IBMASR=yCONFIG_WAFER_WDT=y
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not setCONFIG_HP_WATCHDOG=yCONFIG_SC1200_WDT=yCONFIG_PC87413_WDT=yCONFIG_60XX_WDT=y
# CONFIG_SBC8360_WDT is not setCONFIG_CPU5_WDT=yCONFIG_SMSC37B787_WDT=y
# CONFIG_W83627HF_WDT is not setCONFIG_W83697HF_WDT=y
# CONFIG_W83877F_WDT is not setCONFIG_W83977F_WDT=yCONFIG_MACHZ_WDT=yCONFIG_SBC_EPX_C3_WATCHDOG=y
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=y
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
#
# Sonics Silicon Backplane
#CONFIG_SSB_POSSIBLE=yCONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not setCONFIG_SSB_PCMCIAHOST_POSSIBLE=yCONFIG_SSB_PCMCIAHOST=yCONFIG_SSB_SILENT=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not setCONFIG_MFD_SM501=yCONFIG_HTC_PASIC3=y
# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not setCONFIG_DVB_CORE=yCONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#CONFIG_MEDIA_TUNER=yCONFIG_MEDIA_TUNER_CUSTOMIZE=yCONFIG_MEDIA_TUNER_SIMPLE=yCONFIG_MEDIA_TUNER_TDA8290=yCONFIG_MEDIA_TUNER_TDA827X=yCONFIG_MEDIA_TUNER_TDA18271=yCONFIG_MEDIA_TUNER_TDA9887=yCONFIG_MEDIA_TUNER_TEA5761=yCONFIG_MEDIA_TUNER_TEA5767=yCONFIG_MEDIA_TUNER_MT20XX=yCONFIG_MEDIA_TUNER_MT2060=yCONFIG_MEDIA_TUNER_MT2266=y
# CONFIG_MEDIA_TUNER_MT2131 is not setCONFIG_MEDIA_TUNER_QT1010=yCONFIG_MEDIA_TUNER_XC2028=yCONFIG_MEDIA_TUNER_XC5000=yCONFIG_MEDIA_TUNER_MXL5005S=yCONFIG_MEDIA_TUNER_MXL5007T=yCONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
#CONFIG_DVB_USB=yCONFIG_DVB_USB_DEBUG=yCONFIG_DVB_USB_A800=yCONFIG_DVB_USB_DIBUSB_MB=y
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not setCONFIG_DVB_USB_DIBUSB_MC=yCONFIG_DVB_USB_DIB0700=y
# CONFIG_DVB_USB_UMT_010 is not setCONFIG_DVB_USB_CXUSB=yCONFIG_DVB_USB_M920X=yCONFIG_DVB_USB_GL861=y
# CONFIG_DVB_USB_AU6610 is not set
# CONFIG_DVB_USB_DIGITV is not set
# CONFIG_DVB_USB_VP7045 is not setCONFIG_DVB_USB_VP702X=y
# CONFIG_DVB_USB_GP8PSK is not setCONFIG_DVB_USB_NOVA_T_USB2=yCONFIG_DVB_USB_TTUSB2=yCONFIG_DVB_USB_DTT200U=yCONFIG_DVB_USB_OPERA1=yCONFIG_DVB_USB_DW2102=yCONFIG_DVB_USB_ANYSEE=yCONFIG_DVB_TTUSB_BUDGET=y
# CONFIG_DVB_TTUSB_DEC is not setCONFIG_DVB_CINERGYT2=y
# CONFIG_DVB_CINERGYT2_TUNING is not setCONFIG_DVB_SIANO_SMS1XXX=yCONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y
#
# Supported FlexCopII (B2C2) Adapters
#CONFIG_DVB_B2C2_FLEXCOP=yCONFIG_DVB_B2C2_FLEXCOP_PCI=yCONFIG_DVB_B2C2_FLEXCOP_USB=yCONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not setCONFIG_DVB_CX24123=yCONFIG_DVB_MT312=yCONFIG_DVB_S5H1420=yCONFIG_DVB_STV0299=yCONFIG_DVB_TDA8083=yCONFIG_DVB_TDA10086=y
# CONFIG_DVB_VES1X93 is not setCONFIG_DVB_TUNER_ITD1000=yCONFIG_DVB_TDA826X=yCONFIG_DVB_TUA6100=y
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=yCONFIG_DVB_SP887X=yCONFIG_DVB_CX22700=yCONFIG_DVB_CX22702=yCONFIG_DVB_DRX397XD=y
# CONFIG_DVB_L64781 is not setCONFIG_DVB_TDA1004X=yCONFIG_DVB_NXT6000=yCONFIG_DVB_MT352=yCONFIG_DVB_ZL10353=yCONFIG_DVB_DIB3000MB=yCONFIG_DVB_DIB3000MC=yCONFIG_DVB_DIB7000M=yCONFIG_DVB_DIB7000P=y
# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=yCONFIG_DVB_TDA10021=yCONFIG_DVB_TDA10023=yCONFIG_DVB_STV0297=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_NXT200X=y
# CONFIG_DVB_OR51211 is not setCONFIG_DVB_OR51132=yCONFIG_DVB_BCM3510=yCONFIG_DVB_LGDT330X=yCONFIG_DVB_S5H1409=y
# CONFIG_DVB_AU8522 is not set
# CONFIG_DVB_S5H1411 is not set
#
# Digital terrestrial only tuners/PLL
#CONFIG_DVB_PLL=yCONFIG_DVB_TUNER_DIB0070=y
#
# SEC control devices for DVB-S
#CONFIG_DVB_LNBP21=yCONFIG_DVB_ISL6405=yCONFIG_DVB_ISL6421=yCONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=yCONFIG_AGP_SIS=y
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not setCONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not setCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=yCONFIG_FB_DEFERRED_IO=yCONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#CONFIG_FB_CIRRUS=yCONFIG_FB_PM2=yCONFIG_FB_PM2_FIFO_DISCONNECT=yCONFIG_FB_CYBER2000=y
# CONFIG_FB_ARC is not setCONFIG_FB_ASILIANT=yCONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not setCONFIG_FB_EFI=y
# CONFIG_FB_N411 is not setCONFIG_FB_HGA=yCONFIG_FB_HGA_ACCEL=yCONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not setCONFIG_FB_RIVA=yCONFIG_FB_RIVA_I2C=yCONFIG_FB_RIVA_DEBUG=yCONFIG_FB_RIVA_BACKLIGHT=yCONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not setCONFIG_FB_INTEL=yCONFIG_FB_INTEL_DEBUG=yCONFIG_FB_INTEL_I2C=yCONFIG_FB_MATROX=yCONFIG_FB_MATROX_MILLENIUM=yCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=yCONFIG_FB_MATROX_I2C=yCONFIG_FB_MATROX_MAVEN=y
# CONFIG_FB_MATROX_MULTIHEAD is not setCONFIG_FB_RADEON=yCONFIG_FB_RADEON_I2C=yCONFIG_FB_RADEON_BACKLIGHT=yCONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not setCONFIG_FB_S3=yCONFIG_FB_SAVAGE=yCONFIG_FB_SAVAGE_I2C=yCONFIG_FB_SAVAGE_ACCEL=yCONFIG_FB_SIS=yCONFIG_FB_SIS_300=yCONFIG_FB_SIS_315=yCONFIG_FB_NEOMAGIC=yCONFIG_FB_KYRO=yCONFIG_FB_3DFX=yCONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not setCONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not setCONFIG_FB_CARMINE=yCONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not setCONFIG_FB_GEODE=yCONFIG_FB_GEODE_LX=yCONFIG_FB_GEODE_GX=y
# CONFIG_FB_GEODE_GX1 is not setCONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not setCONFIG_XEN_FBDEV_FRONTEND=yCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=yCONFIG_LCD_LTV350QV=y
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not setCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not setCONFIG_BACKLIGHT_PROGEAR=yCONFIG_BACKLIGHT_CARILLO_RANCH=yCONFIG_BACKLIGHT_MBP_NVIDIA=y
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not setCONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not setCONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=yCONFIG_SOUND=y
# CONFIG_SND is not setCONFIG_SOUND_PRIME=yCONFIG_SOUND_OSS=yCONFIG_SOUND_TRACEINIT=yCONFIG_SOUND_DMAP=yCONFIG_SOUND_SSCAPE=y
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not setCONFIG_SOUND_MSS=y
# CONFIG_SOUND_MPU401 is not setCONFIG_SOUND_PAS=yCONFIG_PAS_JOYSTICK=yCONFIG_SOUND_PSS=yCONFIG_PSS_MIXER=yCONFIG_SOUND_SB=y
# CONFIG_SOUND_YM3812 is not setCONFIG_SOUND_UART6850=yCONFIG_SOUND_AEDSP16=yCONFIG_SC6600=yCONFIG_SC6600_JOY=yCONFIG_SC6600_CDROM=4CONFIG_SC6600_CDROMBASE=0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
# CONFIG_SOUND_KAHLUA is not setCONFIG_AC97_BUS=yCONFIG_HID_SUPPORT=yCONFIG_HID=y
# CONFIG_HID_DEBUG is not setCONFIG_HIDRAW=y
#
# USB Input Devices
#CONFIG_USB_HID=yCONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not setCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=yCONFIG_USB_DEBUG=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not setCONFIG_USB_DYNAMIC_MINORS=yCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not setCONFIG_USB_OTG_BLACKLIST_HUB=yCONFIG_USB_MON=y
#
# USB Host Controller Drivers
#CONFIG_USB_C67X00_HCD=yCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_ISP116X_HCD=yCONFIG_USB_ISP1760_HCD=y
# CONFIG_USB_ISP1760_PCI is not setCONFIG_USB_OHCI_HCD=yCONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not setCONFIG_USB_SL811_HCD=yCONFIG_USB_SL811_CS=y
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=yCONFIG_USB_PRINTER=yCONFIG_USB_WDM=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y # CONFIG_USB_STORAGE_SDDR55 is not set CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y CONFIG_USB_STORAGE_SIERRA=y CONFIG_USB_STORAGE_CYPRESS_ATACB=y # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#CONFIG_USB_USS720=yCONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not setCONFIG_USB_EZUSB=yCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_AIRCABLE=yCONFIG_USB_SERIAL_ARK3116=yCONFIG_USB_SERIAL_BELKIN=yCONFIG_USB_SERIAL_CH341=yCONFIG_USB_SERIAL_WHITEHEAT=yCONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
# CONFIG_USB_SERIAL_CP2101 is not setCONFIG_USB_SERIAL_CYPRESS_M8=yCONFIG_USB_SERIAL_EMPEG=yCONFIG_USB_SERIAL_FTDI_SIO=yCONFIG_USB_SERIAL_FUNSOFT=yCONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not setCONFIG_USB_SERIAL_EDGEPORT=yCONFIG_USB_SERIAL_EDGEPORT_TI=y
# CONFIG_USB_SERIAL_GARMIN is not setCONFIG_USB_SERIAL_IPW=yCONFIG_USB_SERIAL_IUU=y
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not setCONFIG_USB_SERIAL_KEYSPAN=yCONFIG_USB_SERIAL_KLSI=yCONFIG_USB_SERIAL_KOBIL_SCT=yCONFIG_USB_SERIAL_MCT_U232=y
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not setCONFIG_USB_SERIAL_NAVMAN=y
# CONFIG_USB_SERIAL_PL2303 is not setCONFIG_USB_SERIAL_OTI6858=y
# CONFIG_USB_SERIAL_SPCP8X5 is not setCONFIG_USB_SERIAL_HP4X=yCONFIG_USB_SERIAL_SAFE=yCONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not setCONFIG_USB_SERIAL_TI=y
# CONFIG_USB_SERIAL_CYBERJACK is not setCONFIG_USB_SERIAL_XIRCOM=yCONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=y
# CONFIG_USB_EMI26 is not setCONFIG_USB_ADUTUX=y
# CONFIG_USB_RIO500 is not setCONFIG_USB_LEGOTOWER=yCONFIG_USB_LCD=yCONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not setCONFIG_USB_CYPRESS_CY7C63=yCONFIG_USB_CYTHERM=yCONFIG_USB_PHIDGET=y
# CONFIG_USB_PHIDGETKIT is not setCONFIG_USB_PHIDGETMOTORCONTROL=yCONFIG_USB_PHIDGETSERVO=y
# CONFIG_USB_IDMOUSE is not setCONFIG_USB_FTDI_ELAN=yCONFIG_USB_APPLEDISPLAY=yCONFIG_USB_SISUSBVGA=y
# CONFIG_USB_SISUSBVGA_CON is not setCONFIG_USB_LD=yCONFIG_USB_TRANCEVIBRATOR=yCONFIG_USB_IOWARRIOR=y
# CONFIG_USB_ISIGHTFW is not setCONFIG_MMC=yCONFIG_MMC_DEBUG=yCONFIG_MMC_UNSAFE_RESUME=y
#
# MMC/SD Card Drivers
#CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not setCONFIG_SDIO_UART=yCONFIG_MMC_TEST=y
#
# MMC/SD Host Controller Drivers
#CONFIG_MMC_SDHCI=yCONFIG_MMC_SDHCI_PCI=yCONFIG_MMC_RICOH_MMC=yCONFIG_MMC_WBSD=yCONFIG_MMC_TIFM_SD=y
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_SDRICOH_CS is not setCONFIG_MEMSTICK=yCONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=yCONFIG_MEMSTICK_JMICRON_38X=y
# CONFIG_NEW_LEDS is not setCONFIG_ACCESSIBILITY=yCONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not setCONFIG_INFINIBAND_USER_ACCESS=yCONFIG_INFINIBAND_USER_MEM=yCONFIG_INFINIBAND_ADDR_TRANS=yCONFIG_INFINIBAND_MTHCA=y
# CONFIG_INFINIBAND_MTHCA_DEBUG is not setCONFIG_INFINIBAND_IPATH=y
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_MLX4_INFINIBAND is not setCONFIG_INFINIBAND_NES=yCONFIG_INFINIBAND_NES_DEBUG=yCONFIG_INFINIBAND_IPOIB=yCONFIG_INFINIBAND_IPOIB_CM=yCONFIG_INFINIBAND_IPOIB_DEBUG=yCONFIG_INFINIBAND_IPOIB_DEBUG_DATA=yCONFIG_INFINIBAND_SRP=yCONFIG_INFINIBAND_ISER=yCONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_MM_EDAC=yCONFIG_EDAC_E752X=yCONFIG_EDAC_I82975X=y
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not setCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#CONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=yCONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not setCONFIG_RTC_DRV_DS1672=y
# CONFIG_RTC_DRV_MAX6900 is not setCONFIG_RTC_DRV_RS5C372=yCONFIG_RTC_DRV_ISL1208=yCONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8563 is not setCONFIG_RTC_DRV_PCF8583=yCONFIG_RTC_DRV_M41T80=yCONFIG_RTC_DRV_M41T80_WDT=yCONFIG_RTC_DRV_S35390A=yCONFIG_RTC_DRV_FM3130=y
#
# SPI RTC drivers
#CONFIG_RTC_DRV_M41T94=yCONFIG_RTC_DRV_DS1305=y
# CONFIG_RTC_DRV_MAX6902 is not setCONFIG_RTC_DRV_R9701=yCONFIG_RTC_DRV_RS5C348=y
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not setCONFIG_RTC_DRV_DS1742=yCONFIG_RTC_DRV_STK17TA8=yCONFIG_RTC_DRV_M48T86=yCONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not setCONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not setCONFIG_UIO_SMX=yCONFIG_XEN_BALLOON=yCONFIG_XEN_SCRUB_PAGES=y
#
# Firmware Drivers
#CONFIG_EDD=yCONFIG_EDD_OFF=yCONFIG_FIRMWARE_MEMMAP=yCONFIG_DELL_RBU=yCONFIG_DCDBAS=yCONFIG_DMIID=yCONFIG_ISCSI_IBFT_FIND=yCONFIG_ISCSI_IBFT=y
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=yCONFIG_EXT2_FS_XIP=yCONFIG_FS_XIP=y
# CONFIG_EXT3_FS is not setCONFIG_EXT4DEV_FS=yCONFIG_EXT4DEV_FS_XATTR=y
# CONFIG_EXT4DEV_FS_POSIX_ACL is not setCONFIG_EXT4DEV_FS_SECURITY=yCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not setCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=yCONFIG_JFS_FS=yCONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not setCONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not setCONFIG_DNOTIFY=yCONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not setCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=yCONFIG_PRINT_QUOTA_WARNING=yCONFIG_QFMT_V1=yCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not setCONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not setCONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_SYSCTL is not set
# CONFIG_SYSFS is not setCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=y
#
# Miscellaneous filesystems
#CONFIG_ADFS_FS=yCONFIG_ADFS_FS_RW=yCONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not setCONFIG_HFS_FS=yCONFIG_HFSPLUS_FS=yCONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not setCONFIG_BFS_FS=yCONFIG_EFS_FS=y
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not setCONFIG_CRAMFS=yCONFIG_VXFS_FS=yCONFIG_MINIX_FS=yCONFIG_OMFS_FS=yCONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_SYSV_FS=yCONFIG_UFS_FS=yCONFIG_UFS_FS_WRITE=yCONFIG_UFS_DEBUG=y
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not setCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not setCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not setCONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not setCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not setCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=yCONFIG_SYSV68_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=yCONFIG_NLS_CODEPAGE_775=yCONFIG_NLS_CODEPAGE_850=yCONFIG_NLS_CODEPAGE_852=yCONFIG_NLS_CODEPAGE_855=yCONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not setCONFIG_NLS_CODEPAGE_862=yCONFIG_NLS_CODEPAGE_863=yCONFIG_NLS_CODEPAGE_864=yCONFIG_NLS_CODEPAGE_865=yCONFIG_NLS_CODEPAGE_866=yCONFIG_NLS_CODEPAGE_869=yCONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not setCONFIG_NLS_CODEPAGE_932=yCONFIG_NLS_CODEPAGE_949=yCONFIG_NLS_CODEPAGE_874=yCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=yCONFIG_NLS_CODEPAGE_1251=yCONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not setCONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not setCONFIG_NLS_ISO8859_4=yCONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not setCONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not setCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not setCONFIG_NLS_KOI8_R=yCONFIG_NLS_KOI8_U=yCONFIG_NLS_UTF8=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not setCONFIG_STACKTRACE=yCONFIG_DEBUG_MEMORY_INIT=yCONFIG_RCU_CPU_STALL=y
# CONFIG_LATENCYTOP is not setCONFIG_SYSCTL_SYSCALL_CHECK=yCONFIG_HAVE_FTRACE=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_TRACING=y
# CONFIG_FTRACE is not set
# CONFIG_IRQSOFF_TRACER is not setCONFIG_SYSPROF_TRACER=y
# CONFIG_SCHED_TRACER is not setCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_FTRACE_SELFTEST=yCONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not setCONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_STRICT_DEVMEM is not setCONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not setCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not setCONFIG_XOR_BLOCKS=yCONFIG_ASYNC_CORE=yCONFIG_ASYNC_MEMCPY=yCONFIG_ASYNC_XOR=yCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=yCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=yCONFIG_CRYPTO_CTS=yCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XTS=y
#
# Hash modes
#CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=yCONFIG_CRYPTO_RMD128=yCONFIG_CRYPTO_RMD160=yCONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not setCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not setCONFIG_CRYPTO_WP512=y
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_CAMELLIA is not setCONFIG_CRYPTO_CAST5=yCONFIG_CRYPTO_CAST6=yCONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not setCONFIG_CRYPTO_KHAZAD=yCONFIG_CRYPTO_SALSA20=yCONFIG_CRYPTO_SALSA20_X86_64=yCONFIG_CRYPTO_SEED=yCONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not setCONFIG_CRYPTO_HW=yCONFIG_CRYPTO_DEV_HIFN_795X=y
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not setCONFIG_HAVE_KVM=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=y
# CONFIG_KVM_INTEL is not set
# CONFIG_KVM_AMD is not setCONFIG_VIRTIO=yCONFIG_VIRTIO_RING=yCONFIG_VIRTIO_PCI=yCONFIG_VIRTIO_BALLOON=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC7=yCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_REED_SOLOMON=yCONFIG_REED_SOLOMON_DEC16=yCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_FORCE_SUCCESSFUL_BUILD=y
Quoted 12 lines · Ingo Molnar
Quoted 6 lines · Ingo Molnar
Quoted 1 line · Yinghai Lu
[PATCH]
x86_64: printout msrlooks rather useful - added it to tip/x86/debug.
fails to build with the attached config:
Quoted 7 lines
arch/x86/kernel/cpu/common_64.c: In function 'print_cpu_msr':arch/x86/kernel/cpu/common_64.c:456: error: implicit declaration of function 'rdmsrl_amd_safe'arch/x86/kernel/cpu/common_64.c: In function 'print_cpu_info':arch/x86/kernel/cpu/common_64.c:486: error: 'structcpuinfo_x86' has no member named 'cpu_index'i realize that this wasnt sent for inclusion, but i think it would make sense to tidy it up and integrate it.
that was one tool to verify if BIOS does right thing about some special bits.
it seems it doesn't compile when xen etc is enable in config.
YH
Both hunks in the patch applied with an offset of -36 but the show_msr flag doesn't seem to have any effect. The dmesg is still the same number of lines accord to wc.
I'm attaching the new dmesg anyways.
$ cat /proc/cmdline root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8
-J
--
Quoted 183 lines · Yinghai Lu
Quoted 63 lines · Yinghai Lu
Quoted 54 lines · Andrew Morton
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 47 lines · On Wed, 20 Aug 2008 17:38:59 -0700 (PDT) [email protected] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id=11388
Summary: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of
memory is usable
Product: Memory Management
Version: 2.5
KernelVersion: 2.6.27-rc3
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: MTTR
AssignedTo: [email protected]
ReportedBy: [email protected]Latest working kernel version: 2.4.24.2 (possibly later) Earliest failing kernel version: 2.6.27-rc3-21328-ga7f5aaf (from netdev-2.6)
Distribution: Gentoo
Hardware Environment: 2x Intel X5482
Software Environment:
Problem Description:[ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13056MB of RAM. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1561 mtrr_trim_uncached_memory+0x508/0x550() [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc3-21328-ga7f5aaf #8 [ 0.000000] [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80234c3e>] warn_on_slowpath+0x51/0x77 [ 0.000000] [<ffffffff8023570a>] printk+0x4e/0x56 [ 0.000000] [<ffffffff803add02>] sort+0xfa/0x18c [ 0.000000] [<ffffffff808283d3>] cmp_range+0x0/0x6 [ 0.000000] [<ffffffff80828a47>] mtrr_trim_uncached_memory+0x508/0x550 [ 0.000000] [<ffffffff802178e1>] post_set+0x20/0x3d [ 0.000000] [<ffffffff80824f99>] setup_arch+0x39d/0x6be [ 0.000000] [<ffffffff8081e962>] start_kernel+0x74/0x341 [ 0.000000] [<ffffffff8081e394>] x86_64_start_kernel+0xe3/0xe7 [ 0.000000] [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---Quoted 7 lines
Quoted 4 lines
Steps to reproduce:
This warning isn't present under 2.6.24.2 and the full range of physical memory is usable.
Looks like a post-2.6.26 regression caused by
12031a624af7816ec7660b82be648aa3703b4ebe.Quoted 7 lines
reg00: base=0xd0000000 (3328MB), size=196864MB: uncachable, count=1
reg01: base=0xe0000000 (3584MB), size=197120MB: uncachable, count=1
reg02: base=0x00000000 ( 0MB), size=212992MB: write-back, count=1
reg03: base=0x400000000 (16384MB), size=197120MB: write-back, count=1
reg04: base=0x420000000 (16896MB), size=196864MB: write-back, count=1the size mtrr looks crazy.
please apply attached patch and boot with show_msr=1 to dump the msr (including mtrr)
YH
[PATCH]
x86_64: printout msrcommandline show_msr=1 for bsp, show_msr=32 for all 32 cpus.
Signed-off-by Yinghai Lu <[email protected]>--- arch/x86/kernel/cpu/common_64.c | 46 ++++++++++++++++++++++++++++++++++++++++ include/asm-x86/msr.h | 23 ++++++++++++++++++++ 2 files changed, 69 insertions(+)Index:
linux-2.6/arch/x86/kernel/cpu/common_64.c
===================================================================arch/x86/kernel/cpu/common_64.c +46
-0@@ -430,6 +430,49 @@ static __init int setup_noclflush(char * }__setup ("noclflush" , setup_noclflush); +struct msr_range { +unsigned min; +unsigned max; +}; + +static struct msr_range msr_range_array[]__cpuinitdata = { + {0x00000000 ,0x00000418 }, + {0xc0000000 ,0xc000040b }, + {0xc0010000 ,0xc0010142 }, + {0xc0011000 ,0xc001103b }, +}; + +static void __cpuinit print_cpu_msr (void ) +{ +unsigned index; +u64 val; +int i; +unsigned index_min, index_max; + +for (i =0 ; i <ARRAY_SIZE (msr_range_array); i++) { + index_min = msr_range_array[i].min; + index_max = msr_range_array[i].max; +for (index = index_min; index < index_max; index++) { +if (rdmsrl_amd_safe (index, &val)) +continue ; +printk (KERN_INFO " MSR%08x: %016llx\n" , index, val); + } + } +} + +static int show_msr__cpuinitdata ; +static __init int setup_show_msr (char *arg) +{ +int num; + +get_option (&arg, &num); + +if (num >0 ) + show_msr = num; +return 1 ; +} +__setup ("show_msr=" , setup_show_msr); +void __cpuinit print_cpu_info (struct cpuinfo_x86 *c) {if (c->x86_model_id[0 ])@@ -439,6 +482,9 @@ void __cpuinit print_cpu_info(struct cpuprintk (KERN_CONT " stepping %02x\n" , c->x86_mask); else printk(KERN_CONT "\n"); + +if (c->cpu_index < show_msr) +print_cpu_msr (); }static __init int setup_disablecpuid (char *arg)Index:
linux-2.6/include/asm-x86/msr.h
===================================================================include/asm-x86/msr.h +16
-0@@ -63,6 +63,22 @@ static inline unsigned long long native_return EAX_EDX_VAL (val, low, high); } +static inline unsigned long long native_read_msr_amd_safe (unsigned int msr, +int *err) +{ +DECLARE_ARGS (val, low, high); + + asm volatile("2: rdmsr ; xor %0,%0\n" + "1:\n\t" + ".section .fixup,\"ax\"\n\t" + "3: mov %3,%0 ; jmp 1b\n\t" + ".previous\n\t" + _ASM_EXTABLE(2b, 3b) + : "=r" (*err), EAX_EDX_RET(val, low, high) + : "c" (msr), "D" (0x9c5a203a), "i" (-EFAULT)); +return EAX_EDX_VAL (val, low, high); +} +static inline void native_write_msr (unsigned int msr,unsigned low,unsigned high) {@@ -158,6 +174,13 @@ static inline int rdmsrl_safe(unsigned m *p =native_read_msr_safe (msr, &err);return err; }
include/asm-x86/msr.h static inline int rdmsrl_safe(unsigned m · line 186
Quoted 10 lines
include/asm-x86/msr.h +7
-0+static inline int rdmsrl_amd_safe (unsigned msr,unsigned long long *p) +{ +int err; + + *p =native_read_msr_amd_safe (msr, &err); +return err; +}#define rdtscl (low) \ ((low) = (u32)native_read_tsc())
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.27-rc3-21328-ga7f5aaf (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #8 SMP Wed Aug 20 14:17:51 HST 2008 [ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff00000 (usable) [ 0.000000] BIOS-e820: 00000000cff00000 - 00000000cff0a000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff0b000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable) [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13056MB of RAM. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1561 mtrr_trim_uncached_memory+0x508/0x550() [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc3-21328-ga7f5aaf #8 [ 0.000000] [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80234c3e>] warn_on_slowpath+0x51/0x77 [ 0.000000] [<ffffffff8023570a>] printk+0x4e/0x56 [ 0.000000] [<ffffffff803add02>] sort+0xfa/0x18c [ 0.000000] [<ffffffff808283d3>] cmp_range+0x0/0x6 [ 0.000000] [<ffffffff80828a47>] mtrr_trim_uncached_memory+0x508/0x550 [ 0.000000] [<ffffffff802178e1>] post_set+0x20/0x3d [ 0.000000] [<ffffffff80824f99>] setup_arch+0x39d/0x6be [ 0.000000] [<ffffffff8081e962>] start_kernel+0x74/0x341 [ 0.000000] [<ffffffff8081e394>] x86_64_start_kernel+0xe3/0xe7 [ 0.000000] [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.000000] update e820 for mtrr [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] modified: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000ca000 - 00000000000cc000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff00000 (usable) [ 0.000000] modified: 00000000cff00000 - 00000000cff0a000 (ACPI data) [ 0.000000] modified: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS) [ 0.000000] modified: 00000000cff0b000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000430000000 (reserved) [ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff00000 page 4k [ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000 [ 0.000000] last_map_addr: cff00000 end: cff00000 [ 0.000000] RAMDISK: 37e11000 - 37feff22 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7020, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT CFF0395D, 005C (r1 PTLTD XSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP CFF09D60, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3) [ 0.000000] ACPI: DSDT CFF0599D, 434F (r1 Intel SEABURG 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS CFF0AFC0, 0040 [ 0.000000] ACPI: _MAR CFF09E54, 0030 (r1 Intel OEMDMAR 6040000 LOHR 1) [ 0.000000] ACPI: APIC CFF09E84, 00C8 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG CFF09F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: BOOT CFF09F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SPCR CFF09FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) [ 0.000000] ACPI: SSDT CFF039B9, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000cff00000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000cff00000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000030fdf] pages 1a [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00cff00000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00009eff70] TEXT DATA BSS ==> [0000200000 - 00009eff70] [ 0.000000] #3 [0037e11000 - 0037feff22] RAMDISK ==> [0037e11000 - 0037feff22] [ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] found SMP MP-table at [ffff8800000f7050] 000f7050 [ 0.000000] [ffffe20000000000-ffffe200033fffff] PMD -> [ffff880001200000-ffff8800045fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff00 [ 0.000000] On node 0 totalpages: 851614 [ 0.000000] DMA zone: 1797 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 834372 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec88000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000 [ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000 [ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] PERCPU: Allocating 51624 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 836169 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 3192.011 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] console [ttyS0] enabled [ 0.003333] Checking aperture... [ 0.003333] No AGP bridge found [ 0.003333] Memory: 3342244k/3406848k available (3799k kernel code, 64212k reserved, 2164k data, 672k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.006666] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.02 BogoMIPS (lpj=10640036) [ 0.013085] Security Framework initialized [ 0.016665] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.021467] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.026664] Mount-cache hash table entries: 256 [ 0.029998] Initializing cgroup subsys ns [ 0.033331] Initializing cgroup subsys cpuacct [ 0.036664] Initializing cgroup subsys memory [ 0.039997] Initializing cgroup subsys devices [ 0.043330] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.048288] CPU: L2 cache: 6144K [ 0.051710] CPU 0/0 -> Node 0 [ 0.054867] CPU: Physical Processor ID: 0 [ 0.059061] CPU: Processor Core ID: 0 [ 0.062918] CPU0: Thermal monitoring enabled (TM2) [ 0.066662] using mwait in idle threads. [ 0.069995] ACPI: Core revision 20080609 [ 0.082860] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.119582] CPU0: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.124747] Using local APIC timer interrupts. [ 0.133324] APIC timer calibration result 24937571 [ 0.133324] Detected 24.937 MHz APIC timer. [ 0.136657] Booting processor 1/4 ip 6000 [ 0.149990] Initializing CPU#1 [ 0.149990] Calibrating delay using timer specific routine.. 6386.11 BogoMIPS (lpj=10640186) [ 0.149990] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.149990] CPU: L2 cache: 6144K [ 0.149990] CPU 1/4 -> Node 0 [ 0.149990] CPU: Physical Processor ID: 1 [ 0.149990] CPU: Processor Core ID: 0 [ 0.149990] CPU1: Thermal monitoring enabled (TM2) [ 0.149990] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.233318] CPU1: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.239984] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.243317] Booting processor 2/1 ip 6000 [ 0.256649] Initializing CPU#2 [ 0.256649] Calibrating delay using timer specific routine.. 6386.10 BogoMIPS (lpj=10640161) [ 0.256649] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.256649] CPU: L2 cache: 6144K [ 0.256649] CPU 2/1 -> Node 0 [ 0.256649] CPU: Physical Processor ID: 0 [ 0.256649] CPU: Processor Core ID: 1 [ 0.256649] CPU2: Thermal monitoring enabled (TM2) [ 0.256649] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.339977] CPU2: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.348077] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.353310] Booting processor 3/5 ip 6000 [ 0.366642] Initializing CPU#3 [ 0.366642] Calibrating delay using timer specific routine.. 6386.11 BogoMIPS (lpj=10640183) [ 0.366642] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.366642] CPU: L2 cache: 6144K [ 0.366642] CPU 3/5 -> Node 0 [ 0.366642] CPU: Physical Processor ID: 1 [ 0.366642] CPU: Processor Core ID: 1 [ 0.366642] CPU3: Thermal monitoring enabled (TM2) [ 0.366642] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.449857] CPU3: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.456636] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.459970] Booting processor 4/2 ip 6000 [ 0.473302] Initializing CPU#4 [ 0.473302] Calibrating delay using timer specific routine.. 6386.08 BogoMIPS (lpj=10640133) [ 0.473302] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.473302] CPU: L2 cache: 6144K [ 0.473302] CPU 4/2 -> Node 0 [ 0.473302] CPU: Physical Processor ID: 0 [ 0.473302] CPU: Processor Core ID: 2 [ 0.473302] CPU4: Thermal monitoring enabled (TM2) [ 0.473302] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.556633] CPU4: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.563300] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.566633] Booting processor 5/6 ip 6000 [ 0.579962] Initializing CPU#5 [ 0.579962] Calibrating delay using timer specific routine.. 6386.09 BogoMIPS (lpj=10640155) [ 0.579962] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.579962] CPU: L2 cache: 6144K [ 0.579962] CPU 5/6 -> Node 0 [ 0.579962] CPU: Physical Processor ID: 1 [ 0.579962] CPU: Processor Core ID: 2 [ 0.579962] CPU5: Thermal monitoring enabled (TM2) [ 0.579962] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.663300] CPU5: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.669967] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.673300] Booting processor 6/3 ip 6000 [ 0.686621] Initializing CPU#6 [ 0.686621] Calibrating delay using timer specific routine.. 6386.08 BogoMIPS (lpj=10640131) [ 0.686621] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.686621] CPU: L2 cache: 6144K [ 0.686621] CPU 6/3 -> Node 0 [ 0.686621] CPU: Physical Processor ID: 0 [ 0.686621] CPU: Processor Core ID: 3 [ 0.686621] CPU6: Thermal monitoring enabled (TM2) [ 0.686621] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.769967] CPU6: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.776633] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 0.779967] Booting processor 7/7 ip 6000 [ 0.793281] Initializing CPU#7 [ 0.793281] Calibrating delay using timer specific routine.. 6386.11 BogoMIPS (lpj=10640183) [ 0.793281] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.793281] CPU: L2 cache: 6144K [ 0.793281] CPU 7/7 -> Node 0 [ 0.793281] CPU: Physical Processor ID: 1 [ 0.793281] CPU: Processor Core ID: 3 [ 0.793281] CPU7: Thermal monitoring enabled (TM2) [ 0.793281] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.876633] CPU7: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.883300] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 0.886633] Brought up 8 CPUs [ 0.889809] Total of 8 processors activated (51093.73 BogoMIPS). [ 0.893300] net_namespace: 864 bytes [ 0.896633] xor: automatically using best checksumming function: generic_sse [ 0.916224] generic_sse: 11872.800 MB/sec [ 0.919967] xor: using function: generic_sse (11872.800 MB/sec) [ 0.923300] NET: Registered protocol family 16 [ 0.926633] No dock devices found. [ 0.929967] ACPI: bus type pci registered [ 0.933300] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8 [ 0.936633] PCI: MCFG area at e0000000 reserved in E820 [ 0.939967] PCI: Using MMCONFIG at e0000000 - e08fffff [ 0.943300] PCI: Using configuration type 1 for base access [ 0.949967] ACPI: EC: Look up EC in DSDT [ 0.953300] ACPI: Interpreter enabled [ 0.956633] ACPI: (supports S0 S3 S4 S5) [ 0.959967] ACPI: Using IOAPIC for interrupt routing [ 0.966633] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.969967] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.973300] pci 0000:00:00.0: PME# disabled [ 0.976633] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.979967] pci 0000:00:01.0: PME# disabled [ 0.983300] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.986633] pci 0000:00:05.0: PME# disabled [ 0.989967] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.993300] pci 0000:00:09.0: PME# disabled [ 0.996633] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.999967] pci 0000:00:1b.0: PME# disabled [ 1.003300] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.006633] pci 0000:00:1c.0: PME# disabled [ 1.009967] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.013300] pci 0000:00:1d.7: PME# disabled [ 1.016633] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 1.016633] pci 0000:01:00.0: supports D1 [ 1.016633] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.019967] pci 0000:03:00.0: PME# disabled [ 1.023300] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold [ 1.026633] pci 0000:03:00.3: PME# disabled [ 1.029967] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.033300] pci 0000:04:00.0: PME# disabled [ 1.036633] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold [ 1.039967] pci 0000:04:02.0: PME# disabled [ 1.043300] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.046633] pci 0000:06:00.0: PME# disabled [ 1.049967] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold [ 1.053300] pci 0000:06:00.1: PME# disabled [ 1.056633] pci 0000:09:05.0: supports D1 [ 1.056633] pci 0000:09:05.0: supports D2 [ 1.056633] pci 0000:09:06.0: supports D2 [ 1.056633] pci 0000:09:06.0: PME# supported from D2 D3hot D3cold [ 1.059967] pci 0000:09:06.0: PME# disabled [ 1.063300] pci 0000:00:1e.0: transparent bridge [ 1.066633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.067095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.067267] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 1.067520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 1.067855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0._PRT] [ 1.068362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD0._PRT] [ 1.068952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD2._PRT] [ 1.069622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT] [ 1.069967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.069967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 1.079967] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15) [ 1.086417] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.093100] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.096633] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.103092] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) [ 1.109748] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15) [ 1.116209] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15) [ 1.123091] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9 [ 1.129967] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1.133300] pnp: PnP ACPI init [ 1.136606] ACPI: bus type pnp registered [ 1.143300] pnp: PnP ACPI: found 11 devices [ 1.146633] ACPI: ACPI bus type pnp unregistered [ 1.149967] SCSI subsystem initialized [ 1.153300] libata version 3.00 loaded. [ 1.153300] usbcore: registered new interface driver usbfs [ 1.156633] usbcore: registered new interface driver hub [ 1.159967] usbcore: registered new device driver usb [ 1.163300] PCI: Using ACPI for IRQ routing [ 1.182453] PCI-GART: No AMD northbridge found. [ 1.186633] hpet clockevent registered [ 1.186633] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.191225] hpet0: 3 64-bit timers, 14318180 Hz [ 1.196633] ACPI: RTC can wake from S4 [ 1.206787] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 1.210124] system 00:01: ioport range 0x800-0x80f has been reserved [ 1.216660] system 00:01: ioport range 0x1000-0x107f has been reserved [ 1.223304] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 1.230025] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 1.236751] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 1.244580] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 1.252406] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.260230] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.267562] system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved [ 1.274894] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved [ 1.282225] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved [ 1.294506] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.296791] pci 0000:00:01.0: IO window: disabled [ 1.301858] pci 0000:00:01.0: MEM window: 0xdc100000-0xdc1fffff [ 1.308140] pci 0000:00:01.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff [ 1.316064] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02 [ 1.322185] pci 0000:00:05.0: IO window: disabled [ 1.327259] pci 0000:00:05.0: MEM window: disabled [ 1.332419] pci 0000:00:05.0: PREFETCH window: disabled [ 1.338019] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 [ 1.344139] pci 0000:04:00.0: IO window: disabled [ 1.349215] pci 0000:04:00.0: MEM window: disabled [ 1.354382] pci 0000:04:00.0: PREFETCH window: disabled [ 1.359982] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06 [ 1.366655] pci 0000:04:02.0: IO window: 0x2000-0x2fff [ 1.372163] pci 0000:04:02.0: MEM window: 0xdc200000-0xdc2fffff [ 1.378460] pci 0000:04:02.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.386390] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 1.392505] pci 0000:03:00.0: IO window: 0x2000-0x2fff [ 1.398019] pci 0000:03:00.0: MEM window: 0xdc200000-0xdc2fffff [ 1.404312] pci 0000:03:00.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.412230] pci 0000:03:00.3: PCI bridge, secondary bus 0000:07 [ 1.418350] pci 0000:03:00.3: IO window: disabled [ 1.423427] pci 0000:03:00.3: MEM window: disabled [ 1.428588] pci 0000:03:00.3: PREFETCH window: disabled [ 1.434184] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 1.440304] pci 0000:00:09.0: IO window: 0x2000-0x2fff [ 1.445813] pci 0000:00:09.0: MEM window: 0xdc200000-0xdc3fffff [ 1.456277] pci 0000:00:09.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.464201] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 1.470313] pci 0000:00:1c.0: IO window: disabled [ 1.475395] pci 0000:00:1c.0: MEM window: disabled [ 1.480557] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.486173] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 1.492293] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 1.497803] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff [ 1.504090] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff [ 1.512011] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.518911] pci 0000:00:01.0: setting latency timer to 64 [ 1.518917] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.525809] pci 0000:00:05.0: setting latency timer to 64 [ 1.525815] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.532718] pci 0000:00:09.0: setting latency timer to 64 [ 1.532725] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.539636] pci 0000:03:00.0: setting latency timer to 64 [ 1.539643] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.546542] pci 0000:04:00.0: setting latency timer to 64 [ 1.546551] pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.553447] pci 0000:04:02.0: setting latency timer to 64 [ 1.553455] pci 0000:03:00.3: setting latency timer to 64 [ 1.556782] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.560356] pci 0000:00:1c.0: setting latency timer to 64 [ 1.560363] pci 0000:00:1e.0: setting latency timer to 64 [ 1.560380] NET: Registered protocol family 2 [ 1.598362] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.605434] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.616791] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.623135] TCP: Hash tables configured (established 524288 bind 65536) [ 1.630426] TCP reno registered [ 1.643899] NET: Registered protocol family 1 [ 1.648674] checking if image is initramfs... it is [ 1.749046] Freeing initrd memory: 1915k freed [ 1.756055] Simple Boot Flag at 0x40 set to 0x80 [ 1.766066] audit: initializing netlink socket (disabled) [ 1.766526] type=2000 audit(1219350940.763:1): initialized [ 1.779499] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.789241] VFS: Disk quotas dquot_6.5.1 [ 1.796059] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.802377] Installing knfsd (copyright (C) 1996 [email protected]). [ 1.809394] msgmni has been set to 6531 [ 1.812727] async_tx: api initialized (async) [ 1.817410] io scheduler noop registered [ 1.820520] io scheduler anticipatory registered [ 1.824640] io scheduler deadline registered [ 1.832001] io scheduler cfq registered (default) [ 1.834045] pci 0000:09:05.0: Boot video device [ 1.836062] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.836062] pcieport-driver 0000:00:01.0: found MSI capability [ 1.842343] pci_express 0000:00:01.0:pcie00: allocate port service [ 1.842729] pci_express 0000:00:01.0:pcie01: allocate port service [ 1.842729] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 1.842729] pcieport-driver 0000:00:05.0: found MSI capability [ 1.848664] pci_express 0000:00:05.0:pcie00: allocate port service [ 1.849397] pci_express 0000:00:05.0:pcie01: allocate port service [ 1.849397] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 1.849397] pcieport-driver 0000:00:09.0: found MSI capability [ 1.854900] pci_express 0000:00:09.0:pcie00: allocate port service [ 1.856064] pci_express 0000:00:09.0:pcie01: allocate port service [ 1.856064] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.856064] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.861124] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.862731] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.862731] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.862731] pcieport-driver 0000:03:00.0: setting latency timer to 64 [ 1.862731] pci_express 0000:03:00.0:pcie11: allocate port service [ 1.862731] pcieport-driver 0000:04:00.0: setting latency timer to 64 [ 1.862731] pcieport-driver 0000:04:00.0: found MSI capability [ 1.867353] Switched to high resolution mode on CPU 7 [ 1.867353] pci_express 0000:04:00.0:pcie21: allocate port service [ 1.867070] Switched to high resolution mode on CPU 2 [ 1.869398] pcieport-driver 0000:04:02.0: setting latency timer to 64 [ 1.869398] pcieport-driver 0000:04:02.0: found MSI capability [ 1.869398] Switched to high resolution mode on CPU 3 [ 1.866687] Switched to high resolution mode on CPU 1 [ 1.869398] Switched to high resolution mode on CPU 6 [ 1.869336] Switched to high resolution mode on CPU 4 [ 1.869764] Switched to high resolution mode on CPU 5 [ 1.869987] Switched to high resolution mode on CPU 0 [ 1.870468] pci_express 0000:04:02.0:pcie21: allocate port service [ 2.057905] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support [ 2.057905] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support [ 2.057905] aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support [ 2.057905] input: Power Button (FF) as /class/input/input0 [ 2.057905] ACPI: Power Button (FF) [PWRF] [ 2.057905] input: Power Button (CM) as /class/input/input1 [ 2.057905] ACPI: Power Button (CM) [PWRB] [ 2.057905] ACPI: SSDT CFF04DBE, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228) [ 2.057905] processor ACPI0007:00: registered as cooling_device0 [ 2.057905] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.057905] ACPI: SSDT CFF04F9B, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228) [ 2.057905] processor ACPI0007:01: registered as cooling_device1 [ 2.057905] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.057905] ACPI: SSDT CFF05109, 016E (r1 PmRef Cpu2Ist 3000 INTL 20050228) [ 2.057905] processor ACPI0007:02: registered as cooling_device2 [ 2.057905] ACPI: Processor [CPU2] (supports 8 throttling states) [ 2.057905] ACPI: SSDT CFF05277, 016E (r1 PmRef Cpu3Ist 3000 INTL 20050228) [ 2.057905] processor ACPI0007:03: registered as cooling_device3 [ 2.057905] ACPI: Processor [CPU3] (supports 8 throttling states) [ 2.057905] ACPI: SSDT CFF053E5, 016E (r1 PmRef CPU4Ist 3000 INTL 20050228) [ 2.057906] processor ACPI0007:04: registered as cooling_device4 [ 2.057906] ACPI: Processor [CPU4] (supports 8 throttling states) [ 2.057906] ACPI: SSDT CFF05553, 016E (r1 PmRef CPU5Ist 3000 INTL 20050228) [ 2.057906] processor ACPI0007:05: registered as cooling_device5 [ 2.057906] ACPI: Processor [CPU5] (supports 8 throttling states) [ 2.057906] ACPI: SSDT CFF056C1, 016E (r1 PmRef Cpu6Ist 3000 INTL 20050228) [ 2.057906] processor ACPI0007:06: registered as cooling_device6 [ 2.057906] ACPI: Processor [CPU6] (supports 8 throttling states) [ 2.057906] ACPI: SSDT CFF0582F, 016E (r1 PmRef Cpu7Ist 3000 INTL 20050228) [ 2.057906] processor ACPI0007:07: registered as cooling_device7 [ 2.059010] ACPI: Processor [CPU7] (supports 8 throttling states) [ 2.127920] Non-volatile memory driver v1.2 [ 2.137073] intel_rng: FWH not detected [ 2.137655] Linux agpgart interface v0.103 [ 2.142568] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 2.149464] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.155797] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.162133] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.168478] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.190625] FDC 0 is a post-1991 82077 [ 2.196818] brd: module loaded [ 2.200798] loop: module loaded [ 2.203969] tun: Universal TUN/TAP device driver, 1.6 [ 2.207954] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 2.216078] console [netcon0] enabled [ 2.220046] netconsole: network logging started [ 2.223557] Uniform Multi-Platform E-IDE driver [ 2.229458] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 2.239618] Probing IDE interface ide0... [ 2.938159] hda: Optiarc DVD RW AD-7590A, ATAPI CD/DVD-ROM drive [ 3.584497] Probing IDE interface ide1... [ 4.117883] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.120417] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.127680] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 974kB Cache [ 4.135328] Uniform CD-ROM driver Revision: 3.20 [ 6.730957] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 6.739681] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 6.748200] megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008 [ 6.755287] Driver 'sd' needs updating - please use bus_type methods [ 6.761939] Driver 'sr' needs updating - please use bus_type methods [ 6.768535] ata_piix 0000:00:1f.1: version 2.12 [ 6.768535] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.775217] ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7] [ 6.782752] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16) [ 6.790999] ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177] [ 6.798722] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16) [ 6.806962] ata_piix 0000:00:1f.1: no available native port [ 6.814584] Fusion MPT base driver 3.04.07 [ 6.817295] Copyright (c) 1999-2008 LSI Corporation [ 6.821978] Fusion MPT SPI Host driver 3.04.07 [ 6.828279] Fusion MPT SAS Host driver 3.04.07 [ 6.834584] ohci1394 0000:09:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.890635] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dc040000-dc0407ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 6.913818] ieee1394: raw1394: /dev/raw1394 device initialized [ 6.917291] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 6.923965] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 6.923974] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.930097] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 6.940624] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.943963] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 6.943975] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc608000 [ 6.963958] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.971250] usb usb1: configuration #1 chosen from 1 choice [ 6.974979] hub 1-0:1.0: USB hub found [ 6.978985] hub 1-0:1.0: 8 ports detected [ 7.087911] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.087911] USB Universal Host Controller Interface driver v3.0 [ 7.090032] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 7.099763] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 7.099770] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 7.105905] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 7.113756] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 [ 7.119781] usb usb2: configuration #1 chosen from 1 choice [ 7.127916] hub 2-0:1.0: USB hub found [ 7.128922] hub 2-0:1.0: 2 ports detected [ 7.237910] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 7.243340] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 7.243347] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 7.249619] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 7.257487] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 7.264583] usb usb3: configuration #1 chosen from 1 choice [ 7.268605] hub 3-0:1.0: USB hub found [ 7.272675] hub 3-0:1.0: 2 ports detected [ 7.381244] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 7.386677] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 7.386687] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.392948] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 7.400814] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 [ 7.409047] usb usb4: configuration #1 chosen from 1 choice [ 7.411620] hub 4-0:1.0: USB hub found [ 7.416665] hub 4-0:1.0: 2 ports detected [ 7.524577] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 7.530006] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 7.530013] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 7.536277] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 7.544152] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 [ 7.552385] usb usb5: configuration #1 chosen from 1 choice [ 7.555258] hub 5-0:1.0: USB hub found [ 7.559263] hub 5-0:1.0: 2 ports detected [ 7.667910] usbcore: registered new interface driver usblp [ 7.670009] Initializing USB Mass Storage driver... [ 7.679164] usbcore: registered new interface driver usb-storage [ 7.684364] USB Mass Storage support registered. [ 7.688774] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 7.706666] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.707299] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 7.713958] mice: PS/2 mouse device common for all mice [ 8.083323] md: linear personality registered for level -1 [ 8.083327] md: raid0 personality registered for level 0 [ 8.089095] md: raid1 personality registered for level 1 [ 8.094588] md: raid10 personality registered for level 10 [ 8.156666] raid6: int64x1 2955 MB/s [ 8.190623] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e08100002824f8] [ 8.217233] raid6: int64x2 3537 MB/s [ 8.276666] raid6: int64x4 3438 MB/s [ 8.336666] raid6: int64x8 2310 MB/s [ 8.396667] raid6: sse2x1 3699 MB/s [ 8.456666] raid6: sse2x2 7339 MB/s [ 8.516666] raid6: sse2x4 8744 MB/s [ 8.520001] raid6: using algorithm sse2x4 (8744 MB/s) [ 8.524573] md: raid6 personality registered for level 6 [ 8.530066] md: raid5 personality registered for level 5 [ 8.535567] md: raid4 personality registered for level 4 [ 8.540833] md: multipath personality registered for level -4 [ 8.550392] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected] [ 8.558945] cpuidle: using governor ladder [ 8.561311] cpuidle: using governor menu [ 8.565682] usbcore: registered new interface driver usbhid [ 8.571516] usbhid: v2.6:USB HID core driver [ 8.580208] oprofile: using NMI interrupt. [ 8.580421] TCP cubic registered [ 8.586874] NET: Registered protocol family 10 [ 8.588544] IPv6 over IPv4 tunneling driver [ 8.596875] NET: Registered protocol family 17 [ 8.600208] RPC: Registered udp transport module. [ 8.605577] RPC: Registered tcp transport module. [ 8.611255] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 8.617963] Freeing unused kernel memory: 672k freed [ 8.621765] Write protecting the kernel read-only data: 5536k [ 8.863538] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.863538] arcmsr 0000:01:00.0: setting latency timer to 64 [ 8.876862] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.44 2008-1-31 [ 8.890209] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable) [ 8.890209] Driver Version 1.20.00.15 2008/02/27 [ 8.891249] scsi 0:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5 [ 8.891041] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 8.890625] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 8.891458] sd 0:0:0:0: [sda] Write Protect is off [ 8.891458] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 8.890833] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.893749] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 8.893749] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 8.891041] sd 0:0:0:0: [sda] Write Protect is off [ 8.891041] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 8.891458] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.891458] sda: sda1 sda2 sda3 sda4 [ 9.288125] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.288125] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.288125] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 9.288125] scsi 0:0:16:0: Attached scsi generic sg1 type 3 [ 9.357920] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 9.369999] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. [ 9.384166] Adaptec aacraid driver 1.1-5[2456]-ms [ 9.491458] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 9.491459] SGI XFS Quota Management subsystem [ 9.507917] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI [ 9.507917] Copyright (c) 1999-2006 Intel Corporation. [ 13.719989] kjournald starting. Commit interval 5 seconds [ 13.719989] EXT3-fs: mounted filesystem with ordered data mode. [ 22.084790] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 22.084790] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060) [ 22.084790] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.088581] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 [ 22.088581] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 22.088581] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 22.088581] e1000e 0000:06:00.0: setting latency timer to 64 [ 22.104790] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.163954] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:14 [ 22.163954] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 22.163954] 0000:06:00.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 22.163954] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.163954] e1000e 0000:06:00.1: setting latency timer to 64 [ 22.240623] 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:15 [ 22.240623] 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection [ 22.240623] 0000:06:00.1: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 116.458114] EXT3 FS on sda3, internal journal [ 116.601448] SMsC 37B787 watchdog component driver 1.1 initialising... [ 116.601448] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 117.221031] XFS mounting filesystem sda4 [ 117.301234] Ending clean XFS mount for filesystem: sda4 [ 117.421000] Adding 31999992k swap on /dev/sda2. Priority:-1 extents:1 across:31999992k [ 120.787905] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 123.537072] 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 123.540197] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 134.356662] eth0: no IPv6 routers present [ 155.953259] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 155.953944] NFSD: starting 90-second grace period
Quoted 9 lines · Joshua Hoblitt
Both hunks in the patch applied with an offset of -36 but the
show_msrflag doesn't seem to have any effect. The dmesg is still the same number of lines accord to wc.I'm attaching the new dmesg anyways.
$ cat /proc/cmdline root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8
can you check that with tip/master?
http://people.redhat.com/mingo/tip.git/readme.txt
YH
Quoted 3 lines · Yinghai Lu
can you check that with tip/master?
I'm doing that now. Note that I was pulling from netdev-2.6 before.
-J
--
The dmesg from the tip kernel is attached and it's at least larger than the last builds dmesg.
$ wc -l *.dmesg 683 2.6.27-r3.dmesg 829 2.6.27-rc4-tip.dmesg
-J
--
Quoted 10 lines · Joshua Hoblitt
Quoted 3 lines · Yinghai Lu
can you check that with tip/master?
I'm doing that now. Note that I was pulling from netdev-2.6 before.
-J
--
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.27-rc4-tip-00862-gcc150c8 (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 SMP Thu Aug 21 13:52:09 HST 2008 [ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff00000 (usable) [ 0.000000] BIOS-e820: 00000000cff00000 - 00000000cff0a000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff0b000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable) [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13056MB of RAM. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1558 mtrr_trim_uncached_memory+0x522/0x54b() [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc4-tip-00862-gcc150c8 #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80237573>] warn_on_slowpath+0x51/0x77 [ 0.000000] [<ffffffff8023808b>] printk+0x4e/0x56 [ 0.000000] [<ffffffff803b1942>] sort+0xfa/0x18c [ 0.000000] [<ffffffff80802a5b>] cmp_range+0x0/0x6 [ 0.000000] [<ffffffff808030e9>] mtrr_trim_uncached_memory+0x522/0x54b [ 0.000000] [<ffffffff802194d9>] post_set+0x20/0x3d [ 0.000000] [<ffffffff807ff4df>] setup_arch+0x39d/0x6d7 [ 0.000000] [<ffffffff8024702e>] kernel_text_address+0x9/0x26 [ 0.000000] [<ffffffff8024c4de>] notifier_chain_register+0x14/0x55 [ 0.000000] [<ffffffff807f8a1d>] start_kernel+0x74/0x346 [ 0.000000] [<ffffffff807f8394>] x86_64_start_kernel+0xe3/0xe7 [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.000000] update e820 for mtrr [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] modified: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000ca000 - 00000000000cc000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff00000 (usable) [ 0.000000] modified: 00000000cff00000 - 00000000cff0a000 (ACPI data) [ 0.000000] modified: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS) [ 0.000000] modified: 00000000cff0b000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000430000000 (reserved) [ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff00000 page 4k [ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000 [ 0.000000] last_map_addr: cff00000 end: cff00000 [ 0.000000] RAMDISK: 37e10000 - 37fef7d5 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7020, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT CFF0395D, 005C (r1 PTLTD XSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP CFF09D60, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3) [ 0.000000] ACPI: DSDT CFF0599D, 434F (r1 Intel SEABURG 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS CFF0AFC0, 0040 [ 0.000000] ACPI: _MAR CFF09E54, 0030 (r1 Intel OEMDMAR 6040000 LOHR 1) [ 0.000000] ACPI: APIC CFF09E84, 00C8 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG CFF09F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: BOOT CFF09F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SPCR CFF09FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) [ 0.000000] ACPI: SSDT CFF039B9, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000cff00000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000cff00000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000030fdf] pages 1a [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00cff00000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00009beef0] TEXT DATA BSS ==> [0000200000 - 00009beef0] [ 0.000000] #3 [0037e10000 - 0037fef7d5] RAMDISK ==> [0037e10000 - 0037fef7d5] [ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] found SMP MP-table at [ffff8800000f7050] 000f7050 [ 0.000000] [ffffe20000000000-ffffe200033fffff] PMD -> [ffff880001200000-ffff8800045fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff00 [ 0.000000] On node 0 totalpages: 851614 [ 0.000000] DMA zone: 1846 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 834372 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec88000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000 [ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000 [ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 size:0x10 nr:256 align:0x1000 [ 0.000000] dyn_array irq_cfgx+0x0/0x8 size:0x30 nr:32 align:0x1000 [ 0.000000] dyn_array sparse_irqs+0x0/0x8 size:0x100 nr:32 align:0x1000 [ 0.000000] dyn_array total_size: 0x4000 [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 ==> [0x101c000 - 0x101d000] [ 0.000000] dyn_array irq_cfgx+0x0/0x8 ==> [0x101d000 - 0x101d600] [ 0.000000] dyn_array sparse_irqs+0x0/0x8 ==> [0x101e000 - 0x1020000] [ 0.000000] kstat_irqs ==> [0x1020000 - 0x1020400] [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] per cpu data for cpu0 on node0 at 0000000001021000 [ 0.000000] per cpu data for cpu1 on node0 at 000000000102d000 [ 0.000000] per cpu data for cpu2 on node0 at 0000000001039000 [ 0.000000] per cpu data for cpu3 on node0 at 0000000001045000 [ 0.000000] per cpu data for cpu4 on node0 at 0000000001051000 [ 0.000000] per cpu data for cpu5 on node0 at 000000000105d000 [ 0.000000] per cpu data for cpu6 on node0 at 0000000001069000 [ 0.000000] per cpu data for cpu7 on node0 at 0000000001075000 [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 836218 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] Initializing CPU#0 [ 0.000000] found new irq_desc for irq 0 [ 0.000000] found new irq_desc for irq 1 [ 0.000000] found new irq_desc for irq 2 [ 0.000000] found new irq_desc for irq 3 [ 0.000000] found new irq_desc for irq 4 [ 0.000000] found new irq_desc for irq 5 [ 0.000000] found new irq_desc for irq 6 [ 0.000000] found new irq_desc for irq 7 [ 0.000000] found new irq_desc for irq 8 [ 0.000000] found new irq_desc for irq 9 [ 0.000000] found new irq_desc for irq 10 [ 0.000000] found new irq_desc for irq 11 [ 0.000000] found new irq_desc for irq 12 [ 0.000000] found new irq_desc for irq 13 [ 0.000000] found new irq_desc for irq 14 [ 0.000000] found new irq_desc for irq 15 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 3191.983 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] console [ttyS0] enabled [ 0.003333] Checking aperture... [ 0.003333] No AGP bridge found [ 0.003333] Memory: 3342444k/3406848k available (3830k kernel code, 64012k reserved, 2175k data, 672k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.006666] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.96 BogoMIPS (lpj=10639943) [ 0.013081] Security Framework initialized [ 0.016665] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.021461] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.026664] Mount-cache hash table entries: 256 [ 0.029998] Initializing cgroup subsys ns [ 0.033331] Initializing cgroup subsys cpuacct [ 0.036664] Initializing cgroup subsys memory [ 0.039997] Initializing cgroup subsys devices [ 0.043330] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.048291] CPU: L2 cache: 6144K [ 0.051710] CPU 0/0 -> Node 0 [ 0.054865] CPU: Physical Processor ID: 0 [ 0.059063] CPU: Processor Core ID: 0 [ 0.063329] CPU0: Thermal monitoring enabled (TM2) [ 0.066662] using mwait in idle threads. [ 0.069995] ACPI: Core revision 20080609 [ 0.082425] Setting APIC routing to flat [ 0.086661] 0 add_pin_to_irq: irq 1 --> apic 0 pin 1 [ 0.086661] 0 add_pin_to_irq: irq 0 --> apic 0 pin 2 [ 0.086661] 0 add_pin_to_irq: irq 3 --> apic 0 pin 3 [ 0.086661] 0 add_pin_to_irq: irq 4 --> apic 0 pin 4 [ 0.086661] 0 add_pin_to_irq: irq 5 --> apic 0 pin 5 [ 0.086661] 0 add_pin_to_irq: irq 6 --> apic 0 pin 6 [ 0.086661] 0 add_pin_to_irq: irq 7 --> apic 0 pin 7 [ 0.086661] 0 add_pin_to_irq: irq 8 --> apic 0 pin 8 [ 0.086661] 0 add_pin_to_irq: irq 9 --> apic 0 pin 9 [ 0.086661] 0 add_pin_to_irq: irq 10 --> apic 0 pin 10 [ 0.086661] 0 add_pin_to_irq: irq 11 --> apic 0 pin 11 [ 0.086661] 0 add_pin_to_irq: irq 12 --> apic 0 pin 12 [ 0.086661] 0 add_pin_to_irq: irq 13 --> apic 0 pin 13 [ 0.086661] 0 add_pin_to_irq: irq 14 --> apic 0 pin 14 [ 0.086661] 0 add_pin_to_irq: irq 15 --> apic 0 pin 15 [ 0.086661] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.122915] CPU0: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.133324] APIC timer calibration result 24937431 [ 0.133324] Detected 24.937 MHz APIC timer. [ 0.136657] Booting processor 1/4 ip 6000 [ 0.149990] Initializing CPU#1 [ 0.149990] Calibrating delay using timer specific routine.. 6386.03 BogoMIPS (lpj=10640061) [ 0.149990] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.149990] CPU: L2 cache: 6144K [ 0.149990] CPU 1/4 -> Node 0 [ 0.149990] CPU: Physical Processor ID: 1 [ 0.149990] CPU: Processor Core ID: 0 [ 0.149990] CPU1: Thermal monitoring enabled (TM2) [ 0.149990] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.233318] CPU1: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.243317] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.246650] Booting processor 2/1 ip 6000 [ 0.259983] Initializing CPU#2 [ 0.259983] Calibrating delay using timer specific routine.. 6386.02 BogoMIPS (lpj=10640043) [ 0.259983] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.259983] CPU: L2 cache: 6144K [ 0.259983] CPU 2/1 -> Node 0 [ 0.259983] CPU: Physical Processor ID: 0 [ 0.259983] CPU: Processor Core ID: 1 [ 0.259983] CPU2: Thermal monitoring enabled (TM2) [ 0.259983] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.343097] CPU2: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.349977] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.353310] Booting processor 3/5 ip 6000 [ 0.366642] Initializing CPU#3 [ 0.366642] Calibrating delay using timer specific routine.. 6453.47 BogoMIPS (lpj=10751153) [ 0.366642] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.366642] CPU: L2 cache: 6144K [ 0.366642] CPU 3/5 -> Node 0 [ 0.366642] CPU: Physical Processor ID: 1 [ 0.366642] CPU: Processor Core ID: 1 [ 0.366642] CPU3: Thermal monitoring enabled (TM2) [ 0.366642] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.449970] CPU3: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.456636] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.459970] Booting processor 4/2 ip 6000 [ 0.473302] Initializing CPU#4 [ 0.473302] Calibrating delay using timer specific routine.. 6386.99 BogoMIPS (lpj=10639998) [ 0.473302] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.473302] CPU: L2 cache: 6144K [ 0.473302] CPU 4/2 -> Node 0 [ 0.473302] CPU: Physical Processor ID: 0 [ 0.473302] CPU: Processor Core ID: 2 [ 0.473302] CPU4: Thermal monitoring enabled (TM2) [ 0.473302] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.556633] CPU4: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.563300] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.566633] Booting processor 5/6 ip 6000 [ 0.579962] Initializing CPU#5 [ 0.579962] Calibrating delay using timer specific routine.. 6386.01 BogoMIPS (lpj=10640030) [ 0.579962] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.579962] CPU: L2 cache: 6144K [ 0.579962] CPU 5/6 -> Node 0 [ 0.579962] CPU: Physical Processor ID: 1 [ 0.579962] CPU: Processor Core ID: 2 [ 0.579962] CPU5: Thermal monitoring enabled (TM2) [ 0.579962] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.663300] CPU5: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.669967] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.673300] Booting processor 6/3 ip 6000 [ 0.686621] Initializing CPU#6 [ 0.686621] Calibrating delay using timer specific routine.. 6386.99 BogoMIPS (lpj=10639999) [ 0.686621] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.686621] CPU: L2 cache: 6144K [ 0.686621] CPU 6/3 -> Node 0 [ 0.686621] CPU: Physical Processor ID: 0 [ 0.686621] CPU: Processor Core ID: 3 [ 0.686621] CPU6: Thermal monitoring enabled (TM2) [ 0.686621] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.769967] CPU6: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.776633] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 0.779967] Booting processor 7/7 ip 6000 [ 0.793281] Initializing CPU#7 [ 0.793281] Calibrating delay using timer specific routine.. 6386.01 BogoMIPS (lpj=10640024) [ 0.793281] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.793281] CPU: L2 cache: 6144K [ 0.793281] CPU 7/7 -> Node 0 [ 0.793281] CPU: Physical Processor ID: 1 [ 0.793281] CPU: Processor Core ID: 3 [ 0.793281] CPU7: Thermal monitoring enabled (TM2) [ 0.793281] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.876633] CPU7: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.883300] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 0.886633] Brought up 8 CPUs [ 0.889792] Total of 8 processors activated (51159.53 BogoMIPS). [ 0.893300] net_namespace: 864 bytes [ 0.896633] xor: automatically using best checksumming function: generic_sse [ 0.915667] generic_sse: 11872.800 MB/sec [ 0.919967] xor: using function: generic_sse (11872.800 MB/sec) [ 0.923300] NET: Registered protocol family 16 [ 0.926633] No dock devices found. [ 0.929967] ACPI: bus type pci registered [ 0.933300] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8 [ 0.936633] PCI: MCFG area at e0000000 reserved in E820 [ 0.939967] PCI: Using MMCONFIG at e0000000 - e08fffff [ 0.943300] PCI: Using configuration type 1 for base access [ 0.949967] ACPI: EC: Look up EC in DSDT [ 0.953300] ACPI: Interpreter enabled [ 0.956633] ACPI: (supports S0 S3 S4 S5) [ 0.959967] ACPI: Using IOAPIC for interrupt routing [ 0.966633] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.969967] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.973300] pci 0000:00:00.0: PME# disabled [ 0.976633] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.979967] pci 0000:00:01.0: PME# disabled [ 0.983300] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.986633] pci 0000:00:05.0: PME# disabled [ 0.989967] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.993300] pci 0000:00:09.0: PME# disabled [ 0.996633] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.999967] pci 0000:00:1b.0: PME# disabled [ 1.003300] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.006633] pci 0000:00:1c.0: PME# disabled [ 1.009967] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.013300] pci 0000:00:1d.7: PME# disabled [ 1.016633] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 1.016633] pci 0000:01:00.0: supports D1 [ 1.016633] PCI: bridge 0000:00:01.0 32bit mmio: [dc100000, dc1fffff] [ 1.019967] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.023300] pci 0000:03:00.0: PME# disabled [ 1.026633] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold [ 1.029967] pci 0000:03:00.3: PME# disabled [ 1.033300] PCI: bridge 0000:00:09.0 io port: [2000, 2fff] [ 1.036633] PCI: bridge 0000:00:09.0 32bit mmio: [dc200000, dc3fffff] [ 1.039967] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.043300] pci 0000:04:00.0: PME# disabled [ 1.046633] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold [ 1.049967] pci 0000:04:02.0: PME# disabled [ 1.053300] PCI: bridge 0000:03:00.0 io port: [2000, 2fff] [ 1.056633] PCI: bridge 0000:03:00.0 32bit mmio: [dc200000, dc2fffff] [ 1.059967] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.063300] pci 0000:06:00.0: PME# disabled [ 1.066633] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold [ 1.069967] pci 0000:06:00.1: PME# disabled [ 1.073300] PCI: bridge 0000:04:02.0 io port: [2000, 2fff] [ 1.076633] PCI: bridge 0000:04:02.0 32bit mmio: [dc200000, dc2fffff] [ 1.079967] pci 0000:09:05.0: supports D1 [ 1.079967] pci 0000:09:05.0: supports D2 [ 1.079967] pci 0000:09:06.0: supports D2 [ 1.079967] pci 0000:09:06.0: PME# supported from D2 D3hot D3cold [ 1.083300] pci 0000:09:06.0: PME# disabled [ 1.086633] pci 0000:00:1e.0: transparent bridge [ 1.089967] PCI: bridge 0000:00:1e.0 io port: [3000, 3fff] [ 1.093300] PCI: bridge 0000:00:1e.0 32bit mmio: [dc000000, dc0fffff] [ 1.096633] PCI: bridge 0000:00:1e.0 64bit mmio pref: [d8000000, dbffffff] [ 1.099967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.099967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.099967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 1.099967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 1.099967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0._PRT] [ 1.100861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD0._PRT] [ 1.101087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD2._PRT] [ 1.101394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT] [ 1.101828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.102351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 1.109967] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15) [ 1.116426] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.123087] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.129762] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.136417] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) [ 1.143082] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15) [ 1.149515] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15) [ 1.153300] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9 [ 1.159967] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1.163300] pnp: PnP ACPI init [ 1.166609] ACPI: bus type pnp registered [ 1.173300] pnp: PnP ACPI: found 11 devices [ 1.176633] ACPI: ACPI bus type pnp unregistered [ 1.179967] SCSI subsystem initialized [ 1.183300] libata version 3.00 loaded. [ 1.183300] usbcore: registered new interface driver usbfs [ 1.186633] usbcore: registered new interface driver hub [ 1.189967] usbcore: registered new device driver usb [ 1.193300] PCI: Using ACPI for IRQ routing [ 1.212875] PCI-GART: No AMD northbridge found. [ 1.216633] hpet clockevent registered [ 1.216633] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.221231] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.227657] ACPI: RTC can wake from S4 [ 1.240451] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 1.245465] system 00:01: ioport range 0x800-0x80f has been reserved [ 1.252012] system 00:01: ioport range 0x1000-0x107f has been reserved [ 1.258660] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 1.265389] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 1.272112] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 1.279932] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 1.287758] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.295583] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.302914] system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved [ 1.310247] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved [ 1.317577] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved [ 1.330161] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.332154] pci 0000:00:01.0: IO window: disabled [ 1.337231] pci 0000:00:01.0: MEM window: 0xdc100000-0xdc1fffff [ 1.343525] pci 0000:00:01.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff [ 1.351436] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02 [ 1.357553] pci 0000:00:05.0: IO window: disabled [ 1.362623] pci 0000:00:05.0: MEM window: disabled [ 1.371932] pci 0000:00:05.0: PREFETCH window: disabled [ 1.377532] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 [ 1.383650] pci 0000:04:00.0: IO window: disabled [ 1.388737] pci 0000:04:00.0: MEM window: disabled [ 1.393900] pci 0000:04:00.0: PREFETCH window: disabled [ 1.399496] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06 [ 1.405614] pci 0000:04:02.0: IO window: 0x2000-0x2fff [ 1.411124] pci 0000:04:02.0: MEM window: 0xdc200000-0xdc2fffff [ 1.417417] pci 0000:04:02.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.425343] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 1.431455] pci 0000:03:00.0: IO window: 0x2000-0x2fff [ 1.436972] pci 0000:03:00.0: MEM window: 0xdc200000-0xdc2fffff [ 1.443261] pci 0000:03:00.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.451646] pci 0000:03:00.3: PCI bridge, secondary bus 0000:07 [ 1.457758] pci 0000:03:00.3: IO window: disabled [ 1.462837] pci 0000:03:00.3: MEM window: disabled [ 1.468002] pci 0000:03:00.3: PREFETCH window: disabled [ 1.473602] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 1.479718] pci 0000:00:09.0: IO window: 0x2000-0x2fff [ 1.485228] pci 0000:00:09.0: MEM window: 0xdc200000-0xdc3fffff [ 1.491534] pci 0000:00:09.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.499450] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 1.505566] pci 0000:00:1c.0: IO window: disabled [ 1.510643] pci 0000:00:1c.0: MEM window: disabled [ 1.515808] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.521406] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 1.527518] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 1.533029] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff [ 1.539325] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff [ 1.547245] found new irq_cfg for irq 16 [ 1.547254] 0 add_pin_to_irq: irq 16 --> apic 0 pin 16 [ 1.547267] found new irq_desc for irq 16 [ 1.547282] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.554155] pci 0000:00:01.0: setting latency timer to 64 [ 1.554162] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.561061] pci 0000:00:05.0: setting latency timer to 64 [ 1.561066] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.567959] pci 0000:00:09.0: setting latency timer to 64 [ 1.567965] vendor=8086 device=4029 [ 1.571652] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.578548] pci 0000:03:00.0: setting latency timer to 64 [ 1.578556] vendor=8086 device=3500 [ 1.582236] vendor=8086 device=4029 [ 1.585919] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.592811] pci 0000:04:00.0: setting latency timer to 64 [ 1.592818] vendor=8086 device=3500 [ 1.596501] vendor=8086 device=4029 [ 1.600182] found new irq_cfg for irq 18 [ 1.600183] 0 add_pin_to_irq: irq 18 --> apic 0 pin 18 [ 1.600188] found new irq_desc for irq 18 [ 1.600194] pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.607088] pci 0000:04:02.0: setting latency timer to 64 [ 1.607096] pci 0000:03:00.3: setting latency timer to 64 [ 1.607109] found new irq_cfg for irq 21 [ 1.607123] 0 add_pin_to_irq: irq 21 --> apic 0 pin 21 [ 1.607138] found new irq_desc for irq 21 [ 1.607155] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.613997] pci 0000:00:1c.0: setting latency timer to 64 [ 1.614003] pci 0000:00:1e.0: setting latency timer to 64 [ 1.614012] bus: 00 index 0 io port: [0, ffff] [ 1.618660] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 1.624071] bus: 01 index 0 mmio: [0, 0] [ 1.628193] bus: 01 index 1 mmio: [dc100000, dc1fffff] [ 1.633529] bus: 01 index 2 mmio: [d1000000, d10fffff] [ 1.638865] bus: 01 index 3 mmio: [0, 0] [ 1.642980] bus: 02 index 0 mmio: [0, 0] [ 1.647099] bus: 02 index 1 mmio: [0, 0] [ 1.651210] bus: 02 index 2 mmio: [0, 0] [ 1.655340] bus: 02 index 3 mmio: [0, 0] [ 1.659457] bus: 03 index 0 io port: [2000, 2fff] [ 1.664351] bus: 03 index 1 mmio: [dc200000, dc3fffff] [ 1.669686] bus: 03 index 2 mmio: [d1100000, d11fffff] [ 1.675035] bus: 03 index 3 mmio: [0, 0] [ 1.679152] bus: 04 index 0 io port: [2000, 2fff] [ 1.684055] bus: 04 index 1 mmio: [dc200000, dc2fffff] [ 1.689392] bus: 04 index 2 mmio: [d1100000, d11fffff] [ 1.694721] bus: 04 index 3 mmio: [0, 0] [ 1.698837] bus: 05 index 0 mmio: [0, 0] [ 1.702954] bus: 05 index 1 mmio: [0, 0] [ 1.707501] bus: 05 index 2 mmio: [0, 0] [ 1.711630] bus: 05 index 3 mmio: [0, 0] [ 1.715746] bus: 06 index 0 io port: [2000, 2fff] [ 1.720644] bus: 06 index 1 mmio: [dc200000, dc2fffff] [ 1.725975] bus: 06 index 2 mmio: [d1100000, d11fffff] [ 1.731306] bus: 06 index 3 mmio: [0, 0] [ 1.735435] bus: 07 index 0 mmio: [0, 0] [ 1.739553] bus: 07 index 1 mmio: [0, 0] [ 1.743672] bus: 07 index 2 mmio: [0, 0] [ 1.747788] bus: 07 index 3 mmio: [0, 0] [ 1.751902] bus: 08 index 0 mmio: [0, 0] [ 1.756020] bus: 08 index 1 mmio: [0, 0] [ 1.760137] bus: 08 index 2 mmio: [0, 0] [ 1.764252] bus: 08 index 3 mmio: [0, 0] [ 1.768379] bus: 09 index 0 io port: [3000, 3fff] [ 1.773278] bus: 09 index 1 mmio: [dc000000, dc0fffff] [ 1.778614] bus: 09 index 2 mmio: [d8000000, dbffffff] [ 1.783947] bus: 09 index 3 io port: [0, ffff] [ 1.788581] bus: 09 index 4 mmio: [0, ffffffffffffffff] [ 1.794014] NET: Registered protocol family 2 [ 1.832044] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.837428] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.848795] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.855117] TCP: Hash tables configured (established 524288 bind 65536) [ 1.861926] TCP reno registered [ 1.875410] NET: Registered protocol family 1 [ 1.878880] checking if image is initramfs... it is [ 1.932129] Freeing initrd memory: 1917k freed [ 1.935787] pci 0000:09:05.0: Boot video device [ 1.939163] input: Power Button (FF) as /class/input/input0 [ 1.942159] ACPI: Power Button (FF) [PWRF] [ 1.949470] input: Power Button (CM) as /class/input/input1 [ 1.952768] ACPI: Power Button (CM) [PWRB] [ 1.960068] found new irq_cfg for irq 20 [ 1.960068] 0 add_pin_to_irq: irq 20 --> apic 0 pin 20 [ 1.960068] found new irq_desc for irq 20 [ 1.960068] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.957967] Switched to high resolution mode on CPU 2 [ 1.958119] Switched to high resolution mode on CPU 5 [ 1.960075] Switched to high resolution mode on CPU 3 [ 1.960073] Switched to high resolution mode on CPU 6 [ 1.958611] Switched to high resolution mode on CPU 4 [ 1.958615] Switched to high resolution mode on CPU 7 [ 1.959458] Switched to high resolution mode on CPU 1 [ 1.963822] Switched to high resolution mode on CPU 0 [ 1.963832] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.963845] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.221976] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.221976] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.221976] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.221976] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc608000 [ 2.221976] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.221976] usb usb1: configuration #1 chosen from 1 choice [ 2.221976] hub 1-0:1.0: USB hub found [ 2.221976] hub 1-0:1.0: 8 ports detected [ 2.221977] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.221977] USB Universal Host Controller Interface driver v3.0 [ 2.221977] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.221977] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.221977] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.221977] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.221977] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 [ 2.221977] usb usb2: configuration #1 chosen from 1 choice [ 2.221977] hub 2-0:1.0: USB hub found [ 2.221977] hub 2-0:1.0: 2 ports detected [ 2.283328] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.286675] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.286682] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.291388] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.299653] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 2.304781] usb usb3: configuration #1 chosen from 1 choice [ 2.311396] hub 3-0:1.0: USB hub found [ 2.315409] hub 3-0:1.0: 2 ports detected [ 2.424783] found new irq_cfg for irq 22 [ 2.424783] 0 add_pin_to_irq: irq 22 --> apic 0 pin 22 [ 2.424783] found new irq_desc for irq 22 [ 2.424783] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.430006] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.430012] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.434719] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.443011] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 [ 2.448122] usb usb4: configuration #1 chosen from 1 choice [ 2.454726] hub 4-0:1.0: USB hub found [ 2.458737] hub 4-0:1.0: 2 ports detected [ 2.568116] found new irq_cfg for irq 23 [ 2.568116] 0 add_pin_to_irq: irq 23 --> apic 0 pin 23 [ 2.568116] found new irq_desc for irq 23 [ 2.568116] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.573340] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.573347] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.578044] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.586329] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 [ 2.591448] usb usb5: configuration #1 chosen from 1 choice [ 2.598085] hub 5-0:1.0: USB hub found [ 2.602111] hub 5-0:1.0: 2 ports detected [ 2.711450] Simple Boot Flag at 0x40 set to 0x80 [ 2.718126] audit: initializing netlink socket (disabled) [ 2.723993] type=2000 audit(1219363544.720:1): initialized [ 2.734797] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.744797] VFS: Disk quotas dquot_6.5.1 [ 2.748463] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.755197] Installing knfsd (copyright (C) 1996 [email protected]). [ 2.762850] msgmni has been set to 6531 [ 2.767165] async_tx: api initialized (async) [ 2.771716] io scheduler noop registered [ 2.775187] io scheduler anticipatory registered [ 2.779310] io scheduler deadline registered [ 2.785250] io scheduler cfq registered (default) [ 2.789827] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 2.789988] pcieport-driver 0000:00:01.0: found MSI capability [ 2.796171] found new irq_cfg for irq 33024 [ 2.796188] found new irq_desc for irq 33024 [ 2.796212] pci_express 0000:00:01.0:pcie00: allocate port service [ 2.796466] pci_express 0000:00:01.0:pcie01: allocate port service [ 2.796466] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 2.796466] pcieport-driver 0000:00:05.0: found MSI capability [ 2.802674] found new irq_cfg for irq 164096 [ 2.802674] found new irq_desc for irq 164096 [ 2.802674] pci_express 0000:00:05.0:pcie00: allocate port service [ 2.802674] pci_express 0000:00:05.0:pcie01: allocate port service [ 2.802674] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 2.802674] pcieport-driver 0000:00:09.0: found MSI capability [ 2.808872] found new irq_cfg for irq 295168 [ 2.808878] found new irq_desc for irq 295168 [ 2.808878] pci_express 0000:00:09.0:pcie00: allocate port service [ 2.808878] pci_express 0000:00:09.0:pcie01: allocate port service [ 2.808878] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.808878] pcieport-driver 0000:00:1c.0: found MSI capability [ 2.815092] found new irq_cfg for irq 917760 [ 2.815092] found new irq_desc for irq 917760 [ 2.815092] pci_express 0000:00:1c.0:pcie00: allocate port service [ 2.815092] pci_express 0000:00:1c.0:pcie02: allocate port service [ 2.815092] pci_express 0000:00:1c.0:pcie03: allocate port service [ 2.815092] pcieport-driver 0000:03:00.0: setting latency timer to 64 [ 2.815092] pci_express 0000:03:00.0:pcie11: allocate port service [ 2.815092] pcieport-driver 0000:04:00.0: setting latency timer to 64 [ 2.815092] pcieport-driver 0000:04:00.0: found MSI capability [ 2.821470] found new irq_cfg for irq 4194560 [ 2.821470] found new irq_desc for irq 4194560 [ 2.821470] pci_express 0000:04:00.0:pcie21: allocate port service [ 2.821470] pcieport-driver 0000:04:02.0: setting latency timer to 64 [ 2.821470] pcieport-driver 0000:04:02.0: found MSI capability [ 2.824818] found new irq_cfg for irq 4260096 [ 2.824835] found new irq_desc for irq 4260096 [ 2.824863] pci_express 0000:04:02.0:pcie21: allocate port service [ 2.827930] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support [ 2.827930] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support [ 2.827930] aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support [ 2.827930] ACPI: SSDT CFF04DBE, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228) [ 2.839743] processor ACPI0007:00: registered as cooling_device0 [ 2.843338] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.851067] ACPI: SSDT CFF04F9B, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228) [ 2.863958] processor ACPI0007:01: registered as cooling_device1 [ 2.863961] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.870848] ACPI: SSDT CFF05109, 016E (r1 PmRef Cpu2Ist 3000 INTL 20050228) [ 2.882423] processor ACPI0007:02: registered as cooling_device2 [ 2.884887] ACPI: Processor [CPU2] (supports 8 throttling states) [ 2.894156] ACPI: SSDT CFF05277, 016E (r1 PmRef Cpu3Ist 3000 INTL 20050228) [ 2.903959] processor ACPI0007:03: registered as cooling_device3 [ 2.907296] ACPI: Processor [CPU3] (supports 8 throttling states) [ 2.914783] ACPI: SSDT CFF053E5, 016E (r1 PmRef CPU4Ist 3000 INTL 20050228) [ 2.928625] processor ACPI0007:04: registered as cooling_device4 [ 2.932042] ACPI: Processor [CPU4] (supports 8 throttling states) [ 2.940460] ACPI: SSDT CFF05553, 016E (r1 PmRef CPU5Ist 3000 INTL 20050228) [ 2.953958] processor ACPI0007:05: registered as cooling_device5 [ 2.953963] ACPI: Processor [CPU5] (supports 8 throttling states) [ 2.961174] ACPI: SSDT CFF056C1, 016E (r1 PmRef Cpu6Ist 3000 INTL 20050228) [ 2.973963] processor ACPI0007:06: registered as cooling_device6 [ 2.975295] ACPI: Processor [CPU6] (supports 8 throttling states) [ 2.983217] ACPI: SSDT CFF0582F, 016E (r1 PmRef Cpu7Ist 3000 INTL 20050228) [ 2.994791] processor ACPI0007:07: registered as cooling_device7 [ 2.996869] ACPI: Processor [CPU7] (supports 8 throttling states) [ 3.068127] Non-volatile memory driver v1.2 [ 3.071952] intel_rng: FWH not detected [ 3.075411] Linux agpgart interface v0.103 [ 3.081251] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 3.087917] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.094583] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.101250] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.105852] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.128126] FDC 0 is a post-1991 82077 [ 3.134794] brd: module loaded [ 3.139901] loop: module loaded [ 3.142122] tun: Universal TUN/TAP device driver, 1.6 [ 3.147366] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 3.154791] console [netcon0] enabled [ 3.158127] netconsole: network logging started [ 3.162841] Uniform Multi-Platform E-IDE driver [ 3.168245] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 3.178252] Probing IDE interface ide0... [ 3.875104] hda: Optiarc DVD RW AD-7590A, ATAPI CD/DVD-ROM drive [ 4.521230] Probing IDE interface ide1... [ 5.053945] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.057472] ide1 at 0x170-0x177,0x376 on irq 15 [ 5.063300] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 974kB Cache [ 5.072020] Uniform CD-ROM driver Revision: 3.20 [ 7.671081] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 7.680523] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 7.688269] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 7.694910] Driver 'sd' needs updating - please use bus_type methods [ 7.701566] Driver 'sr' needs updating - please use bus_type methods [ 7.708162] ata_piix 0000:00:1f.1: version 2.12 [ 7.708162] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.714844] ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7] [ 7.722590] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16) [ 7.730141] ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177] [ 7.737861] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16) [ 7.746104] ata_piix 0000:00:1f.1: no available native port [ 7.753958] Fusion MPT base driver 3.04.07 [ 7.757293] Copyright (c) 1999-2008 LSI Corporation [ 7.761619] Fusion MPT SPI Host driver 3.04.07 [ 7.767994] Fusion MPT SAS Host driver 3.04.07 [ 7.772700] vendor=8086 device=244e [ 7.776036] found new irq_cfg for irq 17 [ 7.776040] 0 add_pin_to_irq: irq 17 --> apic 0 pin 17 [ 7.776047] found new irq_desc for irq 17 [ 7.776056] ohci1394 0000:09:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.837304] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dc040000-dc0407ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 7.854831] ieee1394: raw1394: /dev/raw1394 device initialized [ 7.861257] usbcore: registered new interface driver usblp [ 7.864371] Initializing USB Mass Storage driver... [ 7.871561] usbcore: registered new interface driver usb-storage [ 7.877802] USB Mass Storage support registered. [ 7.883427] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 7.893355] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.896706] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 7.904589] mice: PS/2 mouse device common for all mice [ 8.264580] md: linear personality registered for level -1 [ 8.265864] md: raid0 personality registered for level 0 [ 8.272529] md: raid1 personality registered for level 1 [ 8.278027] md: raid10 personality registered for level 10 [ 8.339999] raid6: int64x1 2954 MB/s [ 8.399999] raid6: int64x2 3542 MB/s [ 8.459999] raid6: int64x4 3432 MB/s [ 8.519999] raid6: int64x8 2319 MB/s [ 8.579999] raid6: sse2x1 3637 MB/s [ 8.639999] raid6: sse2x2 7362 MB/s [ 8.700418] raid6: sse2x4 8743 MB/s [ 8.703333] raid6: using algorithm sse2x4 (8743 MB/s) [ 8.707697] md: raid6 personality registered for level 6 [ 8.716276] md: raid5 personality registered for level 5 [ 8.721774] md: raid4 personality registered for level 4 [ 8.723967] md: multipath personality registered for level -4 [ 8.732811] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected] [ 8.741824] cpuidle: using governor ladder [ 8.744461] cpuidle: using governor menu [ 8.748811] usbcore: registered new interface driver usbhid [ 8.754641] usbhid: v2.6:USB HID core driver [ 8.759372] oprofile: using NMI interrupt. [ 8.763967] TCP cubic registered [ 8.767922] NET: Registered protocol family 10 [ 8.771676] IPv6 over IPv4 tunneling driver [ 8.777922] NET: Registered protocol family 17 [ 8.782537] RPC: Registered udp transport module. [ 8.787891] RPC: Registered tcp transport module. [ 8.794588] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 8.801365] Freeing unused kernel memory: 672k freed [ 8.804896] Write protecting the kernel read-only data: 5576k [ 9.035910] vendor=8086 device=4021 [ 9.035910] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.035910] arcmsr 0000:01:00.0: setting latency timer to 64 [ 9.047290] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.44 2008-1-31 [ 9.059982] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable) [ 9.059989] Driver Version 1.20.00.15 2008/02/27 [ 9.060416] scsi 0:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5 [ 9.060207] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 9.061041] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 9.061457] sd 0:0:0:0: [sda] Write Protect is off [ 9.061457] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 9.060000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.061457] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 9.061457] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 9.060207] sd 0:0:0:0: [sda] Write Protect is off [ 9.060207] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 9.061457] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.061457] sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e08100002824f8] [ 9.450808] sda1 sda2 sda3 sda4 [ 9.454374] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.456849] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.456849] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 9.456849] scsi 0:0:16:0: Attached scsi generic sg1 type 3 [ 9.521250] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 9.532143] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. [ 9.548653] Adaptec aacraid driver 1.1-5[2456]-ms [ 9.653333] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 9.656275] SGI XFS Quota Management subsystem [ 9.669306] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI [ 9.669306] Copyright (c) 1999-2006 Intel Corporation. [ 13.883324] kjournald starting. Commit interval 5 seconds [ 13.883324] EXT3-fs: mounted filesystem with ordered data mode. [ 22.158124] found new irq_cfg for irq 19 [ 22.158124] 0 add_pin_to_irq: irq 19 --> apic 0 pin 19 [ 22.158124] found new irq_desc for irq 19 [ 22.158124] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.163542] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 22.163542] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060) [ 22.163542] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.171457] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 [ 22.171457] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 22.171457] vendor=8086 device=3518 [ 22.171457] vendor=8086 device=3500 [ 22.171457] vendor=8086 device=4029 [ 22.171457] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 22.171457] e1000e 0000:06:00.0: setting latency timer to 64 [ 22.247915] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:14 [ 22.247915] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 22.247915] 0000:06:00.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 22.247915] vendor=8086 device=3518 [ 22.247915] vendor=8086 device=3500 [ 22.247915] vendor=8086 device=4029 [ 22.247915] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.247915] e1000e 0000:06:00.1: setting latency timer to 64 [ 22.321248] 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:15 [ 22.321248] 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection [ 22.321248] 0000:06:00.1: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 23.093333] EXT3 FS on sda3, internal journal [ 23.244790] SMsC 37B787 watchdog component driver 1.1 initialising... [ 23.244790] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 23.634789] XFS mounting filesystem sda4 [ 23.763214] Ending clean XFS mount for filesystem: sda4 [ 23.846924] Adding 31999992k swap on /dev/sda2. Priority:-1 extents:1 across:31999992k [ 27.620000] found new irq_cfg for irq 6291712 [ 27.620000] found new irq_desc for irq 6291712 [ 27.673651] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.790417] 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 30.793544] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 40.923341] eth0: no IPv6 routers present [ 62.888260] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 62.894694] NFSD: starting 90-second grace period
Quoted 2 lines · Joshua Hoblitt
The dmesg from the tip kernel is attached and it's at least larger than the last builds dmesg.
did you apply my debug patch?
you should get msr print out...
YH
Lol. No - I thought you implied it was in the tip tree. Sigh. I'll try again.
-J
--
Quoted 8 lines · Yinghai Lu
Quoted 2 lines · Joshua Hoblitt
The dmesg from the tip kernel is attached and it's at least larger than the last builds dmesg.
did you apply my debug patch?
you should get msr print out...YH
I have applied your patch to the tip tree and rebuilt. Still no msr dump.
-J
--
Quoted 15 lines · Joshua Hoblitt
Lol. No - I thought you implied it was in the tip tree. Sigh. I'll try again.
-J
--
Quoted 8 lines · Yinghai Lu
Quoted 2 lines · Joshua Hoblitt
The dmesg from the tip kernel is attached and it's at least larger than the last builds dmesg.
did you apply my debug patch?
you should get msr print out...YH
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.27-rc4-tip-00862-gcc150c8 (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 SMP Thu Aug 21 13:52:09 HST 2008 [ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff00000 (usable) [ 0.000000] BIOS-e820: 00000000cff00000 - 00000000cff0a000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff0b000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable) [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13056MB of RAM. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1558 mtrr_trim_uncached_memory+0x522/0x54b() [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc4-tip-00862-gcc150c8 #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80237573>] warn_on_slowpath+0x51/0x77 [ 0.000000] [<ffffffff8023808b>] printk+0x4e/0x56 [ 0.000000] [<ffffffff803b1942>] sort+0xfa/0x18c [ 0.000000] [<ffffffff80802a5b>] cmp_range+0x0/0x6 [ 0.000000] [<ffffffff808030e9>] mtrr_trim_uncached_memory+0x522/0x54b [ 0.000000] [<ffffffff802194d9>] post_set+0x20/0x3d [ 0.000000] [<ffffffff807ff4df>] setup_arch+0x39d/0x6d7 [ 0.000000] [<ffffffff8024702e>] kernel_text_address+0x9/0x26 [ 0.000000] [<ffffffff8024c4de>] notifier_chain_register+0x14/0x55 [ 0.000000] [<ffffffff807f8a1d>] start_kernel+0x74/0x346 [ 0.000000] [<ffffffff807f8394>] x86_64_start_kernel+0xe3/0xe7 [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.000000] update e820 for mtrr [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] modified: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000ca000 - 00000000000cc000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff00000 (usable) [ 0.000000] modified: 00000000cff00000 - 00000000cff0a000 (ACPI data) [ 0.000000] modified: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS) [ 0.000000] modified: 00000000cff0b000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000430000000 (reserved) [ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff00000 page 4k [ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000 [ 0.000000] last_map_addr: cff00000 end: cff00000 [ 0.000000] RAMDISK: 37e10000 - 37fef7d5 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7020, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT CFF0395D, 005C (r1 PTLTD XSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP CFF09D60, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3) [ 0.000000] ACPI: DSDT CFF0599D, 434F (r1 Intel SEABURG 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS CFF0AFC0, 0040 [ 0.000000] ACPI: _MAR CFF09E54, 0030 (r1 Intel OEMDMAR 6040000 LOHR 1) [ 0.000000] ACPI: APIC CFF09E84, 00C8 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG CFF09F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: BOOT CFF09F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SPCR CFF09FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) [ 0.000000] ACPI: SSDT CFF039B9, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000cff00000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000cff00000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000030fdf] pages 1a [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00cff00000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00009beef0] TEXT DATA BSS ==> [0000200000 - 00009beef0] [ 0.000000] #3 [0037e10000 - 0037fef7d5] RAMDISK ==> [0037e10000 - 0037fef7d5] [ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] found SMP MP-table at [ffff8800000f7050] 000f7050 [ 0.000000] [ffffe20000000000-ffffe200033fffff] PMD -> [ffff880001200000-ffff8800045fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff00 [ 0.000000] On node 0 totalpages: 851614 [ 0.000000] DMA zone: 1846 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 834372 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec88000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000 [ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000 [ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 size:0x10 nr:256 align:0x1000 [ 0.000000] dyn_array irq_cfgx+0x0/0x8 size:0x30 nr:32 align:0x1000 [ 0.000000] dyn_array sparse_irqs+0x0/0x8 size:0x100 nr:32 align:0x1000 [ 0.000000] dyn_array total_size: 0x4000 [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 ==> [0x101c000 - 0x101d000] [ 0.000000] dyn_array irq_cfgx+0x0/0x8 ==> [0x101d000 - 0x101d600] [ 0.000000] dyn_array sparse_irqs+0x0/0x8 ==> [0x101e000 - 0x1020000] [ 0.000000] kstat_irqs ==> [0x1020000 - 0x1020400] [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] per cpu data for cpu0 on node0 at 0000000001021000 [ 0.000000] per cpu data for cpu1 on node0 at 000000000102d000 [ 0.000000] per cpu data for cpu2 on node0 at 0000000001039000 [ 0.000000] per cpu data for cpu3 on node0 at 0000000001045000 [ 0.000000] per cpu data for cpu4 on node0 at 0000000001051000 [ 0.000000] per cpu data for cpu5 on node0 at 000000000105d000 [ 0.000000] per cpu data for cpu6 on node0 at 0000000001069000 [ 0.000000] per cpu data for cpu7 on node0 at 0000000001075000 [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 836218 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] Initializing CPU#0 [ 0.000000] found new irq_desc for irq 0 [ 0.000000] found new irq_desc for irq 1 [ 0.000000] found new irq_desc for irq 2 [ 0.000000] found new irq_desc for irq 3 [ 0.000000] found new irq_desc for irq 4 [ 0.000000] found new irq_desc for irq 5 [ 0.000000] found new irq_desc for irq 6 [ 0.000000] found new irq_desc for irq 7 [ 0.000000] found new irq_desc for irq 8 [ 0.000000] found new irq_desc for irq 9 [ 0.000000] found new irq_desc for irq 10 [ 0.000000] found new irq_desc for irq 11 [ 0.000000] found new irq_desc for irq 12 [ 0.000000] found new irq_desc for irq 13 [ 0.000000] found new irq_desc for irq 14 [ 0.000000] found new irq_desc for irq 15 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 3192.003 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] console [ttyS0] enabled [ 0.003333] Checking aperture... [ 0.003333] No AGP bridge found [ 0.003333] Memory: 3342444k/3406848k available (3830k kernel code, 64012k reserved, 2175k data, 672k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.006666] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.00 BogoMIPS (lpj=10640010) [ 0.013090] Security Framework initialized [ 0.016665] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.021482] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.026664] Mount-cache hash table entries: 256 [ 0.029998] Initializing cgroup subsys ns [ 0.033331] Initializing cgroup subsys cpuacct [ 0.036664] Initializing cgroup subsys memory [ 0.039997] Initializing cgroup subsys devices [ 0.043330] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.048295] CPU: L2 cache: 6144K [ 0.051718] CPU 0/0 -> Node 0 [ 0.054884] CPU: Physical Processor ID: 0 [ 0.059078] CPU: Processor Core ID: 0 [ 0.062932] CPU0: Thermal monitoring enabled (TM2) [ 0.066662] using mwait in idle threads. [ 0.069995] ACPI: Core revision 20080609 [ 0.082433] Setting APIC routing to flat [ 0.086661] 0 add_pin_to_irq: irq 1 --> apic 0 pin 1 [ 0.086661] 0 add_pin_to_irq: irq 0 --> apic 0 pin 2 [ 0.086661] 0 add_pin_to_irq: irq 3 --> apic 0 pin 3 [ 0.086661] 0 add_pin_to_irq: irq 4 --> apic 0 pin 4 [ 0.086661] 0 add_pin_to_irq: irq 5 --> apic 0 pin 5 [ 0.086661] 0 add_pin_to_irq: irq 6 --> apic 0 pin 6 [ 0.086661] 0 add_pin_to_irq: irq 7 --> apic 0 pin 7 [ 0.086661] 0 add_pin_to_irq: irq 8 --> apic 0 pin 8 [ 0.086661] 0 add_pin_to_irq: irq 9 --> apic 0 pin 9 [ 0.086661] 0 add_pin_to_irq: irq 10 --> apic 0 pin 10 [ 0.086661] 0 add_pin_to_irq: irq 11 --> apic 0 pin 11 [ 0.086661] 0 add_pin_to_irq: irq 12 --> apic 0 pin 12 [ 0.086661] 0 add_pin_to_irq: irq 13 --> apic 0 pin 13 [ 0.086661] 0 add_pin_to_irq: irq 14 --> apic 0 pin 14 [ 0.086661] 0 add_pin_to_irq: irq 15 --> apic 0 pin 15 [ 0.086661] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.122915] CPU0: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.133324] APIC timer calibration result 24937581 [ 0.133324] Detected 24.937 MHz APIC timer. [ 0.136657] Booting processor 1/4 ip 6000 [ 0.149990] Initializing CPU#1 [ 0.149990] Calibrating delay using timer specific routine.. 6386.12 BogoMIPS (lpj=10640193) [ 0.149990] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.149990] CPU: L2 cache: 6144K [ 0.149990] CPU 1/4 -> Node 0 [ 0.149990] CPU: Physical Processor ID: 1 [ 0.149990] CPU: Processor Core ID: 0 [ 0.149990] CPU1: Thermal monitoring enabled (TM2) [ 0.149990] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.233318] CPU1: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.243317] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.246829] Booting processor 2/1 ip 6000 [ 0.263316] Initializing CPU#2 [ 0.263316] Calibrating delay using timer specific routine.. 6386.09 BogoMIPS (lpj=10640154) [ 0.263316] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.263316] CPU: L2 cache: 6144K [ 0.263316] CPU 2/1 -> Node 0 [ 0.263316] CPU: Physical Processor ID: 0 [ 0.263316] CPU: Processor Core ID: 1 [ 0.263316] CPU2: Thermal monitoring enabled (TM2) [ 0.263316] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.344816] CPU2: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.353310] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.356643] Booting processor 3/5 ip 6000 [ 0.369975] Initializing CPU#3 [ 0.369975] Calibrating delay using timer specific routine.. 6386.10 BogoMIPS (lpj=10640161) [ 0.369975] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.369975] CPU: L2 cache: 6144K [ 0.369975] CPU 3/5 -> Node 0 [ 0.369975] CPU: Physical Processor ID: 1 [ 0.369975] CPU: Processor Core ID: 1 [ 0.369975] CPU3: Thermal monitoring enabled (TM2) [ 0.369975] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.453303] CPU3: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.459970] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.463303] Booting processor 4/2 ip 6000 [ 0.476635] Initializing CPU#4 [ 0.476635] Calibrating delay using timer specific routine.. 6386.09 BogoMIPS (lpj=10640144) [ 0.476635] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.476635] CPU: L2 cache: 6144K [ 0.476635] CPU 4/2 -> Node 0 [ 0.476635] CPU: Physical Processor ID: 0 [ 0.476635] CPU: Processor Core ID: 2 [ 0.476635] CPU4: Thermal monitoring enabled (TM2) [ 0.476635] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.559967] CPU4: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.566633] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.569967] Booting processor 5/6 ip 6000 [ 0.583295] Initializing CPU#5 [ 0.583295] Calibrating delay using timer specific routine.. 6386.07 BogoMIPS (lpj=10640124) [ 0.583295] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.583295] CPU: L2 cache: 6144K [ 0.583295] CPU 5/6 -> Node 0 [ 0.583295] CPU: Physical Processor ID: 1 [ 0.583295] CPU: Processor Core ID: 2 [ 0.583295] CPU5: Thermal monitoring enabled (TM2) [ 0.583295] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.666633] CPU5: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.673300] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.676633] Booting processor 6/3 ip 6000 [ 0.689955] Initializing CPU#6 [ 0.689955] Calibrating delay using timer specific routine.. 6386.07 BogoMIPS (lpj=10640124) [ 0.689955] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.689955] CPU: L2 cache: 6144K [ 0.689955] CPU 6/3 -> Node 0 [ 0.689955] CPU: Physical Processor ID: 0 [ 0.689955] CPU: Processor Core ID: 3 [ 0.689955] CPU6: Thermal monitoring enabled (TM2) [ 0.689955] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.773300] CPU6: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.779967] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 0.783300] Booting processor 7/7 ip 6000 [ 0.796614] Initializing CPU#7 [ 0.796614] Calibrating delay using timer specific routine.. 6386.11 BogoMIPS (lpj=10640182) [ 0.796614] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.796614] CPU: L2 cache: 6144K [ 0.796614] CPU 7/7 -> Node 0 [ 0.796614] CPU: Physical Processor ID: 1 [ 0.796614] CPU: Processor Core ID: 3 [ 0.796614] CPU7: Thermal monitoring enabled (TM2) [ 0.796614] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.879967] CPU7: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.886633] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 0.889967] Brought up 8 CPUs [ 0.893127] Total of 8 processors activated (51093.68 BogoMIPS). [ 0.896634] net_namespace: 864 bytes [ 0.899967] xor: automatically using best checksumming function: generic_sse [ 0.919003] generic_sse: 11872.800 MB/sec [ 0.923300] xor: using function: generic_sse (11872.800 MB/sec) [ 0.926633] NET: Registered protocol family 16 [ 0.929967] No dock devices found. [ 0.933300] ACPI: bus type pci registered [ 0.936633] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8 [ 0.939967] PCI: MCFG area at e0000000 reserved in E820 [ 0.943300] PCI: Using MMCONFIG at e0000000 - e08fffff [ 0.946633] PCI: Using configuration type 1 for base access [ 0.953300] ACPI: EC: Look up EC in DSDT [ 0.956633] ACPI: Interpreter enabled [ 0.959967] ACPI: (supports S0 S3 S4 S5) [ 0.963300] ACPI: Using IOAPIC for interrupt routing [ 0.969967] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.973300] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.976633] pci 0000:00:00.0: PME# disabled [ 0.979967] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.983300] pci 0000:00:01.0: PME# disabled [ 0.986633] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.989967] pci 0000:00:05.0: PME# disabled [ 0.993300] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.996633] pci 0000:00:09.0: PME# disabled [ 0.999967] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.003300] pci 0000:00:1b.0: PME# disabled [ 1.006633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.009967] pci 0000:00:1c.0: PME# disabled [ 1.013300] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.016633] pci 0000:00:1d.7: PME# disabled [ 1.019967] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 1.019967] pci 0000:01:00.0: supports D1 [ 1.019967] PCI: bridge 0000:00:01.0 32bit mmio: [dc100000, dc1fffff] [ 1.023300] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.026633] pci 0000:03:00.0: PME# disabled [ 1.029967] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold [ 1.033300] pci 0000:03:00.3: PME# disabled [ 1.036633] PCI: bridge 0000:00:09.0 io port: [2000, 2fff] [ 1.039967] PCI: bridge 0000:00:09.0 32bit mmio: [dc200000, dc3fffff] [ 1.043300] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.046633] pci 0000:04:00.0: PME# disabled [ 1.049967] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold [ 1.053300] pci 0000:04:02.0: PME# disabled [ 1.056633] PCI: bridge 0000:03:00.0 io port: [2000, 2fff] [ 1.059967] PCI: bridge 0000:03:00.0 32bit mmio: [dc200000, dc2fffff] [ 1.063300] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.066633] pci 0000:06:00.0: PME# disabled [ 1.069967] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold [ 1.073300] pci 0000:06:00.1: PME# disabled [ 1.076633] PCI: bridge 0000:04:02.0 io port: [2000, 2fff] [ 1.079967] PCI: bridge 0000:04:02.0 32bit mmio: [dc200000, dc2fffff] [ 1.083300] pci 0000:09:05.0: supports D1 [ 1.083300] pci 0000:09:05.0: supports D2 [ 1.083300] pci 0000:09:06.0: supports D2 [ 1.083300] pci 0000:09:06.0: PME# supported from D2 D3hot D3cold [ 1.086633] pci 0000:09:06.0: PME# disabled [ 1.089967] pci 0000:00:1e.0: transparent bridge [ 1.093300] PCI: bridge 0000:00:1e.0 io port: [3000, 3fff] [ 1.096633] PCI: bridge 0000:00:1e.0 32bit mmio: [dc000000, dc0fffff] [ 1.099967] PCI: bridge 0000:00:1e.0 64bit mmio pref: [d8000000, dbffffff] [ 1.103300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.103300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.103300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 1.103300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 1.104010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0._PRT] [ 1.104195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD0._PRT] [ 1.104463] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD2._PRT] [ 1.104813] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT] [ 1.105290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.105857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 1.113300] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15) [ 1.119752] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.126417] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.133099] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.139759] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) [ 1.146424] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15) [ 1.152859] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15) [ 1.159752] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9 [ 1.166633] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1.169967] pnp: PnP ACPI init [ 1.173279] ACPI: bus type pnp registered [ 1.179967] pnp: PnP ACPI: found 11 devices [ 1.183300] ACPI: ACPI bus type pnp unregistered [ 1.186633] SCSI subsystem initialized [ 1.189967] libata version 3.00 loaded. [ 1.189967] usbcore: registered new interface driver usbfs [ 1.193300] usbcore: registered new interface driver hub [ 1.196633] usbcore: registered new device driver usb [ 1.199967] PCI: Using ACPI for IRQ routing [ 1.218715] PCI-GART: No AMD northbridge found. [ 1.223300] hpet clockevent registered [ 1.223300] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.228475] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.233300] ACPI: RTC can wake from S4 [ 1.244882] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 1.248222] system 00:01: ioport range 0x800-0x80f has been reserved [ 1.254771] system 00:01: ioport range 0x1000-0x107f has been reserved [ 1.261422] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 1.268151] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 1.274872] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 1.282705] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 1.290524] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.298349] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.305674] system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved [ 1.313012] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved [ 1.320342] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved [ 1.332484] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.334892] pci 0000:00:01.0: IO window: disabled [ 1.339968] pci 0000:00:01.0: MEM window: 0xdc100000-0xdc1fffff [ 1.346259] pci 0000:00:01.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff [ 1.354179] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02 [ 1.360300] pci 0000:00:05.0: IO window: disabled [ 1.365379] pci 0000:00:05.0: MEM window: disabled [ 1.374717] pci 0000:00:05.0: PREFETCH window: disabled [ 1.380313] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 [ 1.386432] pci 0000:04:00.0: IO window: disabled [ 1.391510] pci 0000:04:00.0: MEM window: disabled [ 1.396674] pci 0000:04:00.0: PREFETCH window: disabled [ 1.402276] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06 [ 1.408392] pci 0000:04:02.0: IO window: 0x2000-0x2fff [ 1.413904] pci 0000:04:02.0: MEM window: 0xdc200000-0xdc2fffff [ 1.420197] pci 0000:04:02.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.428122] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 1.434245] pci 0000:03:00.0: IO window: 0x2000-0x2fff [ 1.439763] pci 0000:03:00.0: MEM window: 0xdc200000-0xdc2fffff [ 1.446053] pci 0000:03:00.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.453970] pci 0000:03:00.3: PCI bridge, secondary bus 0000:07 [ 1.460088] pci 0000:03:00.3: IO window: disabled [ 1.465168] pci 0000:03:00.3: MEM window: disabled [ 1.470332] pci 0000:03:00.3: PREFETCH window: disabled [ 1.475931] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 1.482571] pci 0000:00:09.0: IO window: 0x2000-0x2fff [ 1.488091] pci 0000:00:09.0: MEM window: 0xdc200000-0xdc3fffff [ 1.494393] pci 0000:00:09.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.502310] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 1.508425] pci 0000:00:1c.0: IO window: disabled [ 1.513500] pci 0000:00:1c.0: MEM window: disabled [ 1.518654] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.524259] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 1.530377] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 1.535887] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff [ 1.542182] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff [ 1.550105] found new irq_cfg for irq 16 [ 1.550114] 0 add_pin_to_irq: irq 16 --> apic 0 pin 16 [ 1.550127] found new irq_desc for irq 16 [ 1.550142] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.557012] pci 0000:00:01.0: setting latency timer to 64 [ 1.557019] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.563917] pci 0000:00:05.0: setting latency timer to 64 [ 1.563922] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.570818] pci 0000:00:09.0: setting latency timer to 64 [ 1.570824] vendor=8086 device=4029 [ 1.574510] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.581417] pci 0000:03:00.0: setting latency timer to 64 [ 1.581424] vendor=8086 device=3500 [ 1.585108] vendor=8086 device=4029 [ 1.588793] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.595689] pci 0000:04:00.0: setting latency timer to 64 [ 1.595696] vendor=8086 device=3500 [ 1.599376] vendor=8086 device=4029 [ 1.603056] found new irq_cfg for irq 18 [ 1.603058] 0 add_pin_to_irq: irq 18 --> apic 0 pin 18 [ 1.603063] found new irq_desc for irq 18 [ 1.603069] pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.609965] pci 0000:04:02.0: setting latency timer to 64 [ 1.609974] pci 0000:03:00.3: setting latency timer to 64 [ 1.609986] found new irq_cfg for irq 21 [ 1.610000] 0 add_pin_to_irq: irq 21 --> apic 0 pin 21 [ 1.610015] found new irq_desc for irq 21 [ 1.610032] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.616882] pci 0000:00:1c.0: setting latency timer to 64 [ 1.616889] pci 0000:00:1e.0: setting latency timer to 64 [ 1.616897] bus: 00 index 0 io port: [0, ffff] [ 1.621539] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 1.626955] bus: 01 index 0 mmio: [0, 0] [ 1.631078] bus: 01 index 1 mmio: [dc100000, dc1fffff] [ 1.636412] bus: 01 index 2 mmio: [d1000000, d10fffff] [ 1.641750] bus: 01 index 3 mmio: [0, 0] [ 1.645873] bus: 02 index 0 mmio: [0, 0] [ 1.649990] bus: 02 index 1 mmio: [0, 0] [ 1.654109] bus: 02 index 2 mmio: [0, 0] [ 1.658230] bus: 02 index 3 mmio: [0, 0] [ 1.662348] bus: 03 index 0 io port: [2000, 2fff] [ 1.667245] bus: 03 index 1 mmio: [dc200000, dc3fffff] [ 1.672577] bus: 03 index 2 mmio: [d1100000, d11fffff] [ 1.677915] bus: 03 index 3 mmio: [0, 0] [ 1.682029] bus: 04 index 0 io port: [2000, 2fff] [ 1.686928] bus: 04 index 1 mmio: [dc200000, dc2fffff] [ 1.692258] bus: 04 index 2 mmio: [d1100000, d11fffff] [ 1.697600] bus: 04 index 3 mmio: [0, 0] [ 1.701721] bus: 05 index 0 mmio: [0, 0] [ 1.705839] bus: 05 index 1 mmio: [0, 0] [ 1.709955] bus: 05 index 2 mmio: [0, 0] [ 1.714070] bus: 05 index 3 mmio: [0, 0] [ 1.718186] bus: 06 index 0 io port: [2000, 2fff] [ 1.723086] bus: 06 index 1 mmio: [dc200000, dc2fffff] [ 1.728425] bus: 06 index 2 mmio: [d1100000, d11fffff] [ 1.733763] bus: 06 index 3 mmio: [0, 0] [ 1.738390] bus: 07 index 0 mmio: [0, 0] [ 1.742506] bus: 07 index 1 mmio: [0, 0] [ 1.746618] bus: 07 index 2 mmio: [0, 0] [ 1.750740] bus: 07 index 3 mmio: [0, 0] [ 1.754860] bus: 08 index 0 mmio: [0, 0] [ 1.758982] bus: 08 index 1 mmio: [0, 0] [ 1.763097] bus: 08 index 2 mmio: [0, 0] [ 1.767214] bus: 08 index 3 mmio: [0, 0] [ 1.771340] bus: 09 index 0 io port: [3000, 3fff] [ 1.776235] bus: 09 index 1 mmio: [dc000000, dc0fffff] [ 1.781569] bus: 09 index 2 mmio: [d8000000, dbffffff] [ 1.786908] bus: 09 index 3 io port: [0, ffff] [ 1.791553] bus: 09 index 4 mmio: [0, ffffffffffffffff] [ 1.796987] NET: Registered protocol family 2 [ 1.838223] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.843532] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.854890] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.861233] TCP: Hash tables configured (established 524288 bind 65536) [ 1.868057] TCP reno registered [ 1.881545] NET: Registered protocol family 1 [ 1.884977] checking if image is initramfs... it is [ 1.938223] Freeing initrd memory: 1917k freed [ 1.941956] pci 0000:09:05.0: Boot video device [ 1.945345] input: Power Button (FF) as /class/input/input0 [ 1.948325] ACPI: Power Button (FF) [PWRF] [ 1.955648] input: Power Button (CM) as /class/input/input1 [ 1.958933] ACPI: Power Button (CM) [PWRB] [ 1.966437] found new irq_cfg for irq 20 [ 1.966437] 0 add_pin_to_irq: irq 20 --> apic 0 pin 20 [ 1.966437] found new irq_desc for irq 20 [ 1.966437] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.964114] Switched to high resolution mode on CPU 2 [ 1.966445] Switched to high resolution mode on CPU 3 [ 1.966443] Switched to high resolution mode on CPU 6 [ 1.964258] Switched to high resolution mode on CPU 5 [ 1.964674] Switched to high resolution mode on CPU 4 [ 1.964749] Switched to high resolution mode on CPU 7 [ 1.964966] Switched to high resolution mode on CPU 1 [ 1.969989] Switched to high resolution mode on CPU 0 [ 1.969998] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.970011] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.228142] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.228142] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.228142] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.228142] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc608000 [ 2.228142] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.228142] usb usb1: configuration #1 chosen from 1 choice [ 2.228142] hub 1-0:1.0: USB hub found [ 2.228142] hub 1-0:1.0: 8 ports detected [ 2.228142] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.228142] USB Universal Host Controller Interface driver v3.0 [ 2.228142] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.228142] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.228142] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.228142] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.228142] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 [ 2.228142] usb usb2: configuration #1 chosen from 1 choice [ 2.228142] hub 2-0:1.0: USB hub found [ 2.228142] hub 2-0:1.0: 2 ports detected [ 2.289994] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.293342] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.293348] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.298045] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.306325] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 2.311447] usb usb3: configuration #1 chosen from 1 choice [ 2.318062] hub 3-0:1.0: USB hub found [ 2.322075] hub 3-0:1.0: 2 ports detected [ 2.431244] found new irq_cfg for irq 22 [ 2.431244] 0 add_pin_to_irq: irq 22 --> apic 0 pin 22 [ 2.431244] found new irq_desc for irq 22 [ 2.431244] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.436673] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.436680] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.441397] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.449669] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 [ 2.454791] usb usb4: configuration #1 chosen from 1 choice [ 2.461395] hub 4-0:1.0: USB hub found [ 2.465407] hub 4-0:1.0: 2 ports detected [ 2.574578] found new irq_cfg for irq 23 [ 2.574578] 0 add_pin_to_irq: irq 23 --> apic 0 pin 23 [ 2.574578] found new irq_desc for irq 23 [ 2.574578] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.580007] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.580013] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.584712] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.593003] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 [ 2.598150] usb usb5: configuration #1 chosen from 1 choice [ 2.604718] hub 5-0:1.0: USB hub found [ 2.608733] hub 5-0:1.0: 2 ports detected [ 2.717911] Simple Boot Flag at 0x40 set to 0x80 [ 2.724792] audit: initializing netlink socket (disabled) [ 2.731484] type=2000 audit(1219366433.726:1): initialized [ 2.743333] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.753334] VFS: Disk quotas dquot_6.5.1 [ 2.755221] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.766667] Installing knfsd (copyright (C) 1996 [email protected]). [ 2.770319] msgmni has been set to 6531 [ 2.774691] async_tx: api initialized (async) [ 2.778128] io scheduler noop registered [ 2.782240] io scheduler anticipatory registered [ 2.787039] io scheduler deadline registered [ 2.792639] io scheduler cfq registered (default) [ 2.797918] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 2.797918] pcieport-driver 0000:00:01.0: found MSI capability [ 2.804128] found new irq_cfg for irq 33024 [ 2.804128] found new irq_desc for irq 33024 [ 2.804128] pci_express 0000:00:01.0:pcie00: allocate port service [ 2.804584] pci_express 0000:00:01.0:pcie01: allocate port service [ 2.804584] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 2.804584] pcieport-driver 0000:00:05.0: found MSI capability [ 2.807391] found new irq_cfg for irq 164096 [ 2.807405] found new irq_desc for irq 164096 [ 2.807426] pci_express 0000:00:05.0:pcie00: allocate port service [ 2.808096] pci_express 0000:00:05.0:pcie01: allocate port service [ 2.808923] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 2.809117] pcieport-driver 0000:00:09.0: found MSI capability [ 2.815332] found new irq_cfg for irq 295168 [ 2.815343] found new irq_desc for irq 295168 [ 2.815361] pci_express 0000:00:09.0:pcie00: allocate port service [ 2.815698] pci_express 0000:00:09.0:pcie01: allocate port service [ 2.816495] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.816495] pcieport-driver 0000:00:1c.0: found MSI capability [ 2.822721] found new irq_cfg for irq 917760 [ 2.822722] found new irq_desc for irq 917760 [ 2.822722] pci_express 0000:00:1c.0:pcie00: allocate port service [ 2.822722] pci_express 0000:00:1c.0:pcie02: allocate port service [ 2.822722] pci_express 0000:00:1c.0:pcie03: allocate port service [ 2.822722] pcieport-driver 0000:03:00.0: setting latency timer to 64 [ 2.822722] pci_express 0000:03:00.0:pcie11: allocate port service [ 2.822722] pcieport-driver 0000:04:00.0: setting latency timer to 64 [ 2.822722] pcieport-driver 0000:04:00.0: found MSI capability [ 2.829140] found new irq_cfg for irq 4194560 [ 2.829140] found new irq_desc for irq 4194560 [ 2.829140] pci_express 0000:04:00.0:pcie21: allocate port service [ 2.829140] pcieport-driver 0000:04:02.0: setting latency timer to 64 [ 2.829140] pcieport-driver 0000:04:02.0: found MSI capability [ 2.835337] found new irq_cfg for irq 4260096 [ 2.835337] found new irq_desc for irq 4260096 [ 2.835337] pci_express 0000:04:02.0:pcie21: allocate port service [ 2.835337] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support [ 2.835337] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support [ 2.837364] aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support [ 2.837924] ACPI: SSDT CFF04DBE, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228) [ 2.846662] processor ACPI0007:00: registered as cooling_device0 [ 2.849521] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.856998] ACPI: SSDT CFF04F9B, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228) [ 2.870207] processor ACPI0007:01: registered as cooling_device1 [ 2.871125] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.880402] ACPI: SSDT CFF05109, 016E (r1 PmRef Cpu2Ist 3000 INTL 20050228) [ 2.890408] processor ACPI0007:02: registered as cooling_device2 [ 2.892720] ACPI: Processor [CPU2] (supports 8 throttling states) [ 2.901088] ACPI: SSDT CFF05277, 016E (r1 PmRef Cpu3Ist 3000 INTL 20050228) [ 2.911304] processor ACPI0007:03: registered as cooling_device3 [ 2.917297] ACPI: Processor [CPU3] (supports 8 throttling states) [ 2.923619] ACPI: SSDT CFF053E5, 016E (r1 PmRef CPU4Ist 3000 INTL 20050228) [ 2.937917] processor ACPI0007:04: registered as cooling_device4 [ 2.939955] ACPI: Processor [CPU4] (supports 8 throttling states) [ 2.948396] ACPI: SSDT CFF05553, 016E (r1 PmRef CPU5Ist 3000 INTL 20050228) [ 2.958119] processor ACPI0007:05: registered as cooling_device5 [ 2.961626] ACPI: Processor [CPU5] (supports 8 throttling states) [ 2.971364] ACPI: SSDT CFF056C1, 016E (r1 PmRef Cpu6Ist 3000 INTL 20050228) [ 2.983963] processor ACPI0007:06: registered as cooling_device6 [ 2.983967] ACPI: Processor [CPU6] (supports 8 throttling states) [ 2.992445] ACPI: SSDT CFF0582F, 016E (r1 PmRef Cpu7Ist 3000 INTL 20050228) [ 3.003745] processor ACPI0007:07: registered as cooling_device7 [ 3.008459] ACPI: Processor [CPU7] (supports 8 throttling states) [ 3.070637] Non-volatile memory driver v1.2 [ 3.075359] intel_rng: FWH not detected [ 3.078812] Linux agpgart interface v0.103 [ 3.084583] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 3.091250] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.097917] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.103398] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.109592] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.127501] FDC 0 is a post-1991 82077 [ 3.136839] brd: module loaded [ 3.141461] loop: module loaded [ 3.143964] tun: Universal TUN/TAP device driver, 1.6 [ 3.147985] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 3.156178] console [netcon0] enabled [ 3.159608] netconsole: network logging started [ 3.164325] Uniform Multi-Platform E-IDE driver [ 3.169522] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 3.179678] Probing IDE interface ide0... [ 3.879494] hda: Optiarc DVD RW AD-7590A, ATAPI CD/DVD-ROM drive [ 4.524564] Probing IDE interface ide1... [ 5.056668] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.060420] ide1 at 0x170-0x177,0x376 on irq 15 [ 5.066634] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 974kB Cache [ 5.074600] Uniform CD-ROM driver Revision: 3.20 [ 7.728124] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 7.734949] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 7.742659] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 7.749038] Driver 'sd' needs updating - please use bus_type methods [ 7.755696] Driver 'sr' needs updating - please use bus_type methods [ 7.762300] ata_piix 0000:00:1f.1: version 2.12 [ 7.762300] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.768982] ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7] [ 7.776518] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16) [ 7.784758] ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177] [ 7.792481] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16) [ 7.800724] ata_piix 0000:00:1f.1: no available native port [ 7.807931] Fusion MPT base driver 3.04.07 [ 7.810977] Copyright (c) 1999-2008 LSI Corporation [ 7.815751] Fusion MPT SPI Host driver 3.04.07 [ 7.821617] Fusion MPT SAS Host driver 3.04.07 [ 7.826829] vendor=8086 device=244e [ 7.830165] found new irq_cfg for irq 17 [ 7.830169] 0 add_pin_to_irq: irq 17 --> apic 0 pin 17 [ 7.830177] found new irq_desc for irq 17 [ 7.830187] ohci1394 0000:09:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.890637] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dc040000-dc0407ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 7.909020] ieee1394: raw1394: /dev/raw1394 device initialized [ 7.914584] usbcore: registered new interface driver usblp [ 7.917907] Initializing USB Mass Storage driver... [ 7.924887] usbcore: registered new interface driver usb-storage [ 7.931126] USB Mass Storage support registered. [ 7.936947] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 7.946731] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.950619] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 7.957923] mice: PS/2 mouse device common for all mice [ 8.316658] md: linear personality registered for level -1 [ 8.319171] md: raid0 personality registered for level 0 [ 8.325837] md: raid1 personality registered for level 1 [ 8.331336] md: raid10 personality registered for level 10 [ 8.393333] raid6: int64x1 2954 MB/s [ 8.453333] raid6: int64x2 3541 MB/s [ 8.513333] raid6: int64x4 3431 MB/s [ 8.573333] raid6: int64x8 2300 MB/s [ 8.633333] raid6: sse2x1 3625 MB/s [ 8.693333] raid6: sse2x2 7342 MB/s [ 8.753534] raid6: sse2x4 8725 MB/s [ 8.756874] raid6: using algorithm sse2x4 (8725 MB/s) [ 8.760823] md: raid6 personality registered for level 6 [ 8.769041] md: raid5 personality registered for level 5 [ 8.774538] md: raid4 personality registered for level 4 [ 8.777091] md: multipath personality registered for level -4 [ 8.785215] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected] [ 8.794213] cpuidle: using governor ladder [ 8.797563] cpuidle: using governor menu [ 8.801923] usbcore: registered new interface driver usbhid [ 8.807756] usbhid: v2.6:USB HID core driver [ 8.812469] oprofile: using NMI interrupt. [ 8.817063] TCP cubic registered [ 8.821255] NET: Registered protocol family 10 [ 8.824775] IPv6 over IPv4 tunneling driver [ 8.831255] NET: Registered protocol family 17 [ 8.835637] RPC: Registered udp transport module. [ 8.840903] RPC: Registered tcp transport module. [ 8.847922] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 8.854088] Freeing unused kernel memory: 672k freed [ 8.857881] Write protecting the kernel read-only data: 5576k [ 9.091458] vendor=8086 device=4021 [ 9.091458] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.091458] arcmsr 0000:01:00.0: setting latency timer to 64 [ 9.104583] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.44 2008-1-31 [ 9.116650] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable) [ 9.116657] Driver Version 1.20.00.15 2008/02/27 [ 9.117082] scsi 0:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5 [ 9.116874] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 9.117707] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 9.118124] sd 0:0:0:0: [sda] Write Protect is off [ 9.118124] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 9.116668] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.118124] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 9.118124] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 9.116874] sd 0:0:0:0: [sda] Write Protect is off [ 9.116874] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 9.118124] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.118124] sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e08100002824f8] [ 9.500831] sda1 sda2 sda3 sda4 [ 9.503517] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.503517] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.504167] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 9.504583] scsi 0:0:16:0: Attached scsi generic sg1 type 3 [ 9.572084] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 9.583333] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. [ 9.598220] Adaptec aacraid driver 1.1-5[2456]-ms [ 9.703333] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 9.706666] SGI XFS Quota Management subsystem [ 9.719602] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI [ 9.719602] Copyright (c) 1999-2006 Intel Corporation. [ 13.929972] kjournald starting. Commit interval 5 seconds [ 13.929972] EXT3-fs: mounted filesystem with ordered data mode. [ 22.301270] found new irq_cfg for irq 19 [ 22.301270] 0 add_pin_to_irq: irq 19 --> apic 0 pin 19 [ 22.301270] found new irq_desc for irq 19 [ 22.301270] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.309893] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 22.309893] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060) [ 22.309893] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.314574] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 [ 22.314574] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 22.314574] vendor=8086 device=3518 [ 22.314574] vendor=8086 device=3500 [ 22.314574] vendor=8086 device=4029 [ 22.314574] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 22.314574] e1000e 0000:06:00.0: setting latency timer to 64 [ 22.391040] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:14 [ 22.391040] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 22.391040] 0000:06:00.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 22.391040] vendor=8086 device=3518 [ 22.391040] vendor=8086 device=3500 [ 22.391040] vendor=8086 device=4029 [ 22.391040] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.391040] e1000e 0000:06:00.1: setting latency timer to 64 [ 22.464373] 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:15 [ 22.464373] 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection [ 22.464373] 0000:06:00.1: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 23.297291] EXT3 FS on sda3, internal journal [ 23.463957] SMsC 37B787 watchdog component driver 1.1 initialising... [ 23.463957] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 23.840414] XFS mounting filesystem sda4 [ 23.974769] Ending clean XFS mount for filesystem: sda4 [ 24.050423] Adding 31999992k swap on /dev/sda2. Priority:-1 extents:1 across:31999992k [ 27.870000] found new irq_cfg for irq 6291712 [ 27.870000] found new irq_desc for irq 6291712 [ 27.923748] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.684580] 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 30.689997] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 41.540007] eth0: no IPv6 routers present [ 63.181453] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 63.196662] NFSD: starting 90-second grace period [ 157.601435] kjournald starting. Commit interval 5 seconds [ 157.599978] EXT3 FS on sda1, internal journal [ 157.599978] EXT3-fs: mounted filesystem with ordered data mode.
Ugh - I just realized I forgot to type "-dirty" into grub after rebuilding the kernel. Here is the new dmesg with the msr trace.
-J
--
Quoted 847 lines · Joshua Hoblitt
I have applied your patch to the tip tree and rebuilt. Still no msr dump.
-J
--
Quoted 15 lines · Joshua Hoblitt
Lol. No - I thought you implied it was in the tip tree. Sigh. I'll try again.
-J
--
Quoted 8 lines · Yinghai Lu
Quoted 2 lines · Joshua Hoblitt
The dmesg from the tip kernel is attached and it's at least larger than the last builds dmesg.
did you apply my debug patch?
you should get msr print out...YH
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.27-rc4-tip-00862-gcc150c8 (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 SMP Thu Aug 21 13:52:09 HST 2008 [ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff00000 (usable) [ 0.000000] BIOS-e820: 00000000cff00000 - 00000000cff0a000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff0b000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable) [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13056MB of RAM. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1558 mtrr_trim_uncached_memory+0x522/0x54b() [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc4-tip-00862-gcc150c8 #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80237573>] warn_on_slowpath+0x51/0x77 [ 0.000000] [<ffffffff8023808b>] printk+0x4e/0x56 [ 0.000000] [<ffffffff803b1942>] sort+0xfa/0x18c [ 0.000000] [<ffffffff80802a5b>] cmp_range+0x0/0x6 [ 0.000000] [<ffffffff808030e9>] mtrr_trim_uncached_memory+0x522/0x54b [ 0.000000] [<ffffffff802194d9>] post_set+0x20/0x3d [ 0.000000] [<ffffffff807ff4df>] setup_arch+0x39d/0x6d7 [ 0.000000] [<ffffffff8024702e>] kernel_text_address+0x9/0x26 [ 0.000000] [<ffffffff8024c4de>] notifier_chain_register+0x14/0x55 [ 0.000000] [<ffffffff807f8a1d>] start_kernel+0x74/0x346 [ 0.000000] [<ffffffff807f8394>] x86_64_start_kernel+0xe3/0xe7 [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.000000] update e820 for mtrr [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] modified: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000ca000 - 00000000000cc000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff00000 (usable) [ 0.000000] modified: 00000000cff00000 - 00000000cff0a000 (ACPI data) [ 0.000000] modified: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS) [ 0.000000] modified: 00000000cff0b000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000430000000 (reserved) [ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff00000 page 4k [ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000 [ 0.000000] last_map_addr: cff00000 end: cff00000 [ 0.000000] RAMDISK: 37e10000 - 37fef7d5 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7020, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT CFF0395D, 005C (r1 PTLTD XSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP CFF09D60, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3) [ 0.000000] ACPI: DSDT CFF0599D, 434F (r1 Intel SEABURG 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS CFF0AFC0, 0040 [ 0.000000] ACPI: _MAR CFF09E54, 0030 (r1 Intel OEMDMAR 6040000 LOHR 1) [ 0.000000] ACPI: APIC CFF09E84, 00C8 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG CFF09F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: BOOT CFF09F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SPCR CFF09FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) [ 0.000000] ACPI: SSDT CFF039B9, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000cff00000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000cff00000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000030fdf] pages 1a [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00cff00000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00009beef0] TEXT DATA BSS ==> [0000200000 - 00009beef0] [ 0.000000] #3 [0037e10000 - 0037fef7d5] RAMDISK ==> [0037e10000 - 0037fef7d5] [ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] found SMP MP-table at [ffff8800000f7050] 000f7050 [ 0.000000] [ffffe20000000000-ffffe200033fffff] PMD -> [ffff880001200000-ffff8800045fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff00 [ 0.000000] On node 0 totalpages: 851614 [ 0.000000] DMA zone: 1846 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 834372 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec88000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000 [ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000 [ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 size:0x10 nr:256 align:0x1000 [ 0.000000] dyn_array irq_cfgx+0x0/0x8 size:0x30 nr:32 align:0x1000 [ 0.000000] dyn_array sparse_irqs+0x0/0x8 size:0x100 nr:32 align:0x1000 [ 0.000000] dyn_array total_size: 0x4000 [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 ==> [0x101c000 - 0x101d000] [ 0.000000] dyn_array irq_cfgx+0x0/0x8 ==> [0x101d000 - 0x101d600] [ 0.000000] dyn_array sparse_irqs+0x0/0x8 ==> [0x101e000 - 0x1020000] [ 0.000000] kstat_irqs ==> [0x1020000 - 0x1020400] [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] per cpu data for cpu0 on node0 at 0000000001021000 [ 0.000000] per cpu data for cpu1 on node0 at 000000000102d000 [ 0.000000] per cpu data for cpu2 on node0 at 0000000001039000 [ 0.000000] per cpu data for cpu3 on node0 at 0000000001045000 [ 0.000000] per cpu data for cpu4 on node0 at 0000000001051000 [ 0.000000] per cpu data for cpu5 on node0 at 000000000105d000 [ 0.000000] per cpu data for cpu6 on node0 at 0000000001069000 [ 0.000000] per cpu data for cpu7 on node0 at 0000000001075000 [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 836218 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] Initializing CPU#0 [ 0.000000] found new irq_desc for irq 0 [ 0.000000] found new irq_desc for irq 1 [ 0.000000] found new irq_desc for irq 2 [ 0.000000] found new irq_desc for irq 3 [ 0.000000] found new irq_desc for irq 4 [ 0.000000] found new irq_desc for irq 5 [ 0.000000] found new irq_desc for irq 6 [ 0.000000] found new irq_desc for irq 7 [ 0.000000] found new irq_desc for irq 8 [ 0.000000] found new irq_desc for irq 9 [ 0.000000] found new irq_desc for irq 10 [ 0.000000] found new irq_desc for irq 11 [ 0.000000] found new irq_desc for irq 12 [ 0.000000] found new irq_desc for irq 13 [ 0.000000] found new irq_desc for irq 14 [ 0.000000] found new irq_desc for irq 15 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 3192.003 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] console [ttyS0] enabled [ 0.003333] Checking aperture... [ 0.003333] No AGP bridge found [ 0.003333] Memory: 3342444k/3406848k available (3830k kernel code, 64012k reserved, 2175k data, 672k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.006666] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.00 BogoMIPS (lpj=10640010) [ 0.013090] Security Framework initialized [ 0.016665] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.021482] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.026664] Mount-cache hash table entries: 256 [ 0.029998] Initializing cgroup subsys ns [ 0.033331] Initializing cgroup subsys cpuacct [ 0.036664] Initializing cgroup subsys memory [ 0.039997] Initializing cgroup subsys devices [ 0.043330] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.048295] CPU: L2 cache: 6144K [ 0.051718] CPU 0/0 -> Node 0 [ 0.054884] CPU: Physical Processor ID: 0 [ 0.059078] CPU: Processor Core ID: 0 [ 0.062932] CPU0: Thermal monitoring enabled (TM2) [ 0.066662] using mwait in idle threads. [ 0.069995] ACPI: Core revision 20080609 [ 0.082433] Setting APIC routing to flat [ 0.086661] 0 add_pin_to_irq: irq 1 --> apic 0 pin 1 [ 0.086661] 0 add_pin_to_irq: irq 0 --> apic 0 pin 2 [ 0.086661] 0 add_pin_to_irq: irq 3 --> apic 0 pin 3 [ 0.086661] 0 add_pin_to_irq: irq 4 --> apic 0 pin 4 [ 0.086661] 0 add_pin_to_irq: irq 5 --> apic 0 pin 5 [ 0.086661] 0 add_pin_to_irq: irq 6 --> apic 0 pin 6 [ 0.086661] 0 add_pin_to_irq: irq 7 --> apic 0 pin 7 [ 0.086661] 0 add_pin_to_irq: irq 8 --> apic 0 pin 8 [ 0.086661] 0 add_pin_to_irq: irq 9 --> apic 0 pin 9 [ 0.086661] 0 add_pin_to_irq: irq 10 --> apic 0 pin 10 [ 0.086661] 0 add_pin_to_irq: irq 11 --> apic 0 pin 11 [ 0.086661] 0 add_pin_to_irq: irq 12 --> apic 0 pin 12 [ 0.086661] 0 add_pin_to_irq: irq 13 --> apic 0 pin 13 [ 0.086661] 0 add_pin_to_irq: irq 14 --> apic 0 pin 14 [ 0.086661] 0 add_pin_to_irq: irq 15 --> apic 0 pin 15 [ 0.086661] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.122915] CPU0: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.133324] APIC timer calibration result 24937581 [ 0.133324] Detected 24.937 MHz APIC timer. [ 0.136657] Booting processor 1/4 ip 6000 [ 0.149990] Initializing CPU#1 [ 0.149990] Calibrating delay using timer specific routine.. 6386.12 BogoMIPS (lpj=10640193) [ 0.149990] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.149990] CPU: L2 cache: 6144K [ 0.149990] CPU 1/4 -> Node 0 [ 0.149990] CPU: Physical Processor ID: 1 [ 0.149990] CPU: Processor Core ID: 0 [ 0.149990] CPU1: Thermal monitoring enabled (TM2) [ 0.149990] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.233318] CPU1: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.243317] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.246829] Booting processor 2/1 ip 6000 [ 0.263316] Initializing CPU#2 [ 0.263316] Calibrating delay using timer specific routine.. 6386.09 BogoMIPS (lpj=10640154) [ 0.263316] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.263316] CPU: L2 cache: 6144K [ 0.263316] CPU 2/1 -> Node 0 [ 0.263316] CPU: Physical Processor ID: 0 [ 0.263316] CPU: Processor Core ID: 1 [ 0.263316] CPU2: Thermal monitoring enabled (TM2) [ 0.263316] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.344816] CPU2: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.353310] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.356643] Booting processor 3/5 ip 6000 [ 0.369975] Initializing CPU#3 [ 0.369975] Calibrating delay using timer specific routine.. 6386.10 BogoMIPS (lpj=10640161) [ 0.369975] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.369975] CPU: L2 cache: 6144K [ 0.369975] CPU 3/5 -> Node 0 [ 0.369975] CPU: Physical Processor ID: 1 [ 0.369975] CPU: Processor Core ID: 1 [ 0.369975] CPU3: Thermal monitoring enabled (TM2) [ 0.369975] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.453303] CPU3: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.459970] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.463303] Booting processor 4/2 ip 6000 [ 0.476635] Initializing CPU#4 [ 0.476635] Calibrating delay using timer specific routine.. 6386.09 BogoMIPS (lpj=10640144) [ 0.476635] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.476635] CPU: L2 cache: 6144K [ 0.476635] CPU 4/2 -> Node 0 [ 0.476635] CPU: Physical Processor ID: 0 [ 0.476635] CPU: Processor Core ID: 2 [ 0.476635] CPU4: Thermal monitoring enabled (TM2) [ 0.476635] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.559967] CPU4: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.566633] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.569967] Booting processor 5/6 ip 6000 [ 0.583295] Initializing CPU#5 [ 0.583295] Calibrating delay using timer specific routine.. 6386.07 BogoMIPS (lpj=10640124) [ 0.583295] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.583295] CPU: L2 cache: 6144K [ 0.583295] CPU 5/6 -> Node 0 [ 0.583295] CPU: Physical Processor ID: 1 [ 0.583295] CPU: Processor Core ID: 2 [ 0.583295] CPU5: Thermal monitoring enabled (TM2) [ 0.583295] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.666633] CPU5: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.673300] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.676633] Booting processor 6/3 ip 6000 [ 0.689955] Initializing CPU#6 [ 0.689955] Calibrating delay using timer specific routine.. 6386.07 BogoMIPS (lpj=10640124) [ 0.689955] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.689955] CPU: L2 cache: 6144K [ 0.689955] CPU 6/3 -> Node 0 [ 0.689955] CPU: Physical Processor ID: 0 [ 0.689955] CPU: Processor Core ID: 3 [ 0.689955] CPU6: Thermal monitoring enabled (TM2) [ 0.689955] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.773300] CPU6: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.779967] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 0.783300] Booting processor 7/7 ip 6000 [ 0.796614] Initializing CPU#7 [ 0.796614] Calibrating delay using timer specific routine.. 6386.11 BogoMIPS (lpj=10640182) [ 0.796614] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.796614] CPU: L2 cache: 6144K [ 0.796614] CPU 7/7 -> Node 0 [ 0.796614] CPU: Physical Processor ID: 1 [ 0.796614] CPU: Processor Core ID: 3 [ 0.796614] CPU7: Thermal monitoring enabled (TM2) [ 0.796614] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.879967] CPU7: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.886633] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 0.889967] Brought up 8 CPUs [ 0.893127] Total of 8 processors activated (51093.68 BogoMIPS). [ 0.896634] net_namespace: 864 bytes [ 0.899967] xor: automatically using best checksumming function: generic_sse [ 0.919003] generic_sse: 11872.800 MB/sec [ 0.923300] xor: using function: generic_sse (11872.800 MB/sec) [ 0.926633] NET: Registered protocol family 16 [ 0.929967] No dock devices found. [ 0.933300] ACPI: bus type pci registered [ 0.936633] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8 [ 0.939967] PCI: MCFG area at e0000000 reserved in E820 [ 0.943300] PCI: Using MMCONFIG at e0000000 - e08fffff [ 0.946633] PCI: Using configuration type 1 for base access [ 0.953300] ACPI: EC: Look up EC in DSDT [ 0.956633] ACPI: Interpreter enabled [ 0.959967] ACPI: (supports S0 S3 S4 S5) [ 0.963300] ACPI: Using IOAPIC for interrupt routing [ 0.969967] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.973300] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.976633] pci 0000:00:00.0: PME# disabled [ 0.979967] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.983300] pci 0000:00:01.0: PME# disabled [ 0.986633] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.989967] pci 0000:00:05.0: PME# disabled [ 0.993300] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.996633] pci 0000:00:09.0: PME# disabled [ 0.999967] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.003300] pci 0000:00:1b.0: PME# disabled [ 1.006633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.009967] pci 0000:00:1c.0: PME# disabled [ 1.013300] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.016633] pci 0000:00:1d.7: PME# disabled [ 1.019967] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 1.019967] pci 0000:01:00.0: supports D1 [ 1.019967] PCI: bridge 0000:00:01.0 32bit mmio: [dc100000, dc1fffff] [ 1.023300] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.026633] pci 0000:03:00.0: PME# disabled [ 1.029967] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold [ 1.033300] pci 0000:03:00.3: PME# disabled [ 1.036633] PCI: bridge 0000:00:09.0 io port: [2000, 2fff] [ 1.039967] PCI: bridge 0000:00:09.0 32bit mmio: [dc200000, dc3fffff] [ 1.043300] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.046633] pci 0000:04:00.0: PME# disabled [ 1.049967] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold [ 1.053300] pci 0000:04:02.0: PME# disabled [ 1.056633] PCI: bridge 0000:03:00.0 io port: [2000, 2fff] [ 1.059967] PCI: bridge 0000:03:00.0 32bit mmio: [dc200000, dc2fffff] [ 1.063300] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.066633] pci 0000:06:00.0: PME# disabled [ 1.069967] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold [ 1.073300] pci 0000:06:00.1: PME# disabled [ 1.076633] PCI: bridge 0000:04:02.0 io port: [2000, 2fff] [ 1.079967] PCI: bridge 0000:04:02.0 32bit mmio: [dc200000, dc2fffff] [ 1.083300] pci 0000:09:05.0: supports D1 [ 1.083300] pci 0000:09:05.0: supports D2 [ 1.083300] pci 0000:09:06.0: supports D2 [ 1.083300] pci 0000:09:06.0: PME# supported from D2 D3hot D3cold [ 1.086633] pci 0000:09:06.0: PME# disabled [ 1.089967] pci 0000:00:1e.0: transparent bridge [ 1.093300] PCI: bridge 0000:00:1e.0 io port: [3000, 3fff] [ 1.096633] PCI: bridge 0000:00:1e.0 32bit mmio: [dc000000, dc0fffff] [ 1.099967] PCI: bridge 0000:00:1e.0 64bit mmio pref: [d8000000, dbffffff] [ 1.103300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.103300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.103300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 1.103300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 1.104010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0._PRT] [ 1.104195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD0._PRT] [ 1.104463] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD2._PRT] [ 1.104813] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT] [ 1.105290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.105857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 1.113300] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15) [ 1.119752] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.126417] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.133099] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.139759] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) [ 1.146424] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15) [ 1.152859] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15) [ 1.159752] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9 [ 1.166633] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1.169967] pnp: PnP ACPI init [ 1.173279] ACPI: bus type pnp registered [ 1.179967] pnp: PnP ACPI: found 11 devices [ 1.183300] ACPI: ACPI bus type pnp unregistered [ 1.186633] SCSI subsystem initialized [ 1.189967] libata version 3.00 loaded. [ 1.189967] usbcore: registered new interface driver usbfs [ 1.193300] usbcore: registered new interface driver hub [ 1.196633] usbcore: registered new device driver usb [ 1.199967] PCI: Using ACPI for IRQ routing [ 1.218715] PCI-GART: No AMD northbridge found. [ 1.223300] hpet clockevent registered [ 1.223300] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.228475] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.233300] ACPI: RTC can wake from S4 [ 1.244882] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 1.248222] system 00:01: ioport range 0x800-0x80f has been reserved [ 1.254771] system 00:01: ioport range 0x1000-0x107f has been reserved [ 1.261422] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 1.268151] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 1.274872] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 1.282705] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 1.290524] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.298349] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.305674] system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved [ 1.313012] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved [ 1.320342] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved [ 1.332484] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.334892] pci 0000:00:01.0: IO window: disabled [ 1.339968] pci 0000:00:01.0: MEM window: 0xdc100000-0xdc1fffff [ 1.346259] pci 0000:00:01.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff [ 1.354179] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02 [ 1.360300] pci 0000:00:05.0: IO window: disabled [ 1.365379] pci 0000:00:05.0: MEM window: disabled [ 1.374717] pci 0000:00:05.0: PREFETCH window: disabled [ 1.380313] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 [ 1.386432] pci 0000:04:00.0: IO window: disabled [ 1.391510] pci 0000:04:00.0: MEM window: disabled [ 1.396674] pci 0000:04:00.0: PREFETCH window: disabled [ 1.402276] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06 [ 1.408392] pci 0000:04:02.0: IO window: 0x2000-0x2fff [ 1.413904] pci 0000:04:02.0: MEM window: 0xdc200000-0xdc2fffff [ 1.420197] pci 0000:04:02.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.428122] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 1.434245] pci 0000:03:00.0: IO window: 0x2000-0x2fff [ 1.439763] pci 0000:03:00.0: MEM window: 0xdc200000-0xdc2fffff [ 1.446053] pci 0000:03:00.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.453970] pci 0000:03:00.3: PCI bridge, secondary bus 0000:07 [ 1.460088] pci 0000:03:00.3: IO window: disabled [ 1.465168] pci 0000:03:00.3: MEM window: disabled [ 1.470332] pci 0000:03:00.3: PREFETCH window: disabled [ 1.475931] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 1.482571] pci 0000:00:09.0: IO window: 0x2000-0x2fff [ 1.488091] pci 0000:00:09.0: MEM window: 0xdc200000-0xdc3fffff [ 1.494393] pci 0000:00:09.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.502310] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 1.508425] pci 0000:00:1c.0: IO window: disabled [ 1.513500] pci 0000:00:1c.0: MEM window: disabled [ 1.518654] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.524259] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 1.530377] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 1.535887] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff [ 1.542182] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff [ 1.550105] found new irq_cfg for irq 16 [ 1.550114] 0 add_pin_to_irq: irq 16 --> apic 0 pin 16 [ 1.550127] found new irq_desc for irq 16 [ 1.550142] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.557012] pci 0000:00:01.0: setting latency timer to 64 [ 1.557019] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.563917] pci 0000:00:05.0: setting latency timer to 64 [ 1.563922] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.570818] pci 0000:00:09.0: setting latency timer to 64 [ 1.570824] vendor=8086 device=4029 [ 1.574510] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.581417] pci 0000:03:00.0: setting latency timer to 64 [ 1.581424] vendor=8086 device=3500 [ 1.585108] vendor=8086 device=4029 [ 1.588793] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.595689] pci 0000:04:00.0: setting latency timer to 64 [ 1.595696] vendor=8086 device=3500 [ 1.599376] vendor=8086 device=4029 [ 1.603056] found new irq_cfg for irq 18 [ 1.603058] 0 add_pin_to_irq: irq 18 --> apic 0 pin 18 [ 1.603063] found new irq_desc for irq 18 [ 1.603069] pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.609965] pci 0000:04:02.0: setting latency timer to 64 [ 1.609974] pci 0000:03:00.3: setting latency timer to 64 [ 1.609986] found new irq_cfg for irq 21 [ 1.610000] 0 add_pin_to_irq: irq 21 --> apic 0 pin 21 [ 1.610015] found new irq_desc for irq 21 [ 1.610032] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.616882] pci 0000:00:1c.0: setting latency timer to 64 [ 1.616889] pci 0000:00:1e.0: setting latency timer to 64 [ 1.616897] bus: 00 index 0 io port: [0, ffff] [ 1.621539] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 1.626955] bus: 01 index 0 mmio: [0, 0] [ 1.631078] bus: 01 index 1 mmio: [dc100000, dc1fffff] [ 1.636412] bus: 01 index 2 mmio: [d1000000, d10fffff] [ 1.641750] bus: 01 index 3 mmio: [0, 0] [ 1.645873] bus: 02 index 0 mmio: [0, 0] [ 1.649990] bus: 02 index 1 mmio: [0, 0] [ 1.654109] bus: 02 index 2 mmio: [0, 0] [ 1.658230] bus: 02 index 3 mmio: [0, 0] [ 1.662348] bus: 03 index 0 io port: [2000, 2fff] [ 1.667245] bus: 03 index 1 mmio: [dc200000, dc3fffff] [ 1.672577] bus: 03 index 2 mmio: [d1100000, d11fffff] [ 1.677915] bus: 03 index 3 mmio: [0, 0] [ 1.682029] bus: 04 index 0 io port: [2000, 2fff] [ 1.686928] bus: 04 index 1 mmio: [dc200000, dc2fffff] [ 1.692258] bus: 04 index 2 mmio: [d1100000, d11fffff] [ 1.697600] bus: 04 index 3 mmio: [0, 0] [ 1.701721] bus: 05 index 0 mmio: [0, 0] [ 1.705839] bus: 05 index 1 mmio: [0, 0] [ 1.709955] bus: 05 index 2 mmio: [0, 0] [ 1.714070] bus: 05 index 3 mmio: [0, 0] [ 1.718186] bus: 06 index 0 io port: [2000, 2fff] [ 1.723086] bus: 06 index 1 mmio: [dc200000, dc2fffff] [ 1.728425] bus: 06 index 2 mmio: [d1100000, d11fffff] [ 1.733763] bus: 06 index 3 mmio: [0, 0] [ 1.738390] bus: 07 index 0 mmio: [0, 0] [ 1.742506] bus: 07 index 1 mmio: [0, 0] [ 1.746618] bus: 07 index 2 mmio: [0, 0] [ 1.750740] bus: 07 index 3 mmio: [0, 0] [ 1.754860] bus: 08 index 0 mmio: [0, 0] [ 1.758982] bus: 08 index 1 mmio: [0, 0] [ 1.763097] bus: 08 index 2 mmio: [0, 0] [ 1.767214] bus: 08 index 3 mmio: [0, 0] [ 1.771340] bus: 09 index 0 io port: [3000, 3fff] [ 1.776235] bus: 09 index 1 mmio: [dc000000, dc0fffff] [ 1.781569] bus: 09 index 2 mmio: [d8000000, dbffffff] [ 1.786908] bus: 09 index 3 io port: [0, ffff] [ 1.791553] bus: 09 index 4 mmio: [0, ffffffffffffffff] [ 1.796987] NET: Registered protocol family 2 [ 1.838223] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.843532] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.854890] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.861233] TCP: Hash tables configured (established 524288 bind 65536) [ 1.868057] TCP reno registered [ 1.881545] NET: Registered protocol family 1 [ 1.884977] checking if image is initramfs... it is [ 1.938223] Freeing initrd memory: 1917k freed [ 1.941956] pci 0000:09:05.0: Boot video device [ 1.945345] input: Power Button (FF) as /class/input/input0 [ 1.948325] ACPI: Power Button (FF) [PWRF] [ 1.955648] input: Power Button (CM) as /class/input/input1 [ 1.958933] ACPI: Power Button (CM) [PWRB] [ 1.966437] found new irq_cfg for irq 20 [ 1.966437] 0 add_pin_to_irq: irq 20 --> apic 0 pin 20 [ 1.966437] found new irq_desc for irq 20 [ 1.966437] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.964114] Switched to high resolution mode on CPU 2 [ 1.966445] Switched to high resolution mode on CPU 3 [ 1.966443] Switched to high resolution mode on CPU 6 [ 1.964258] Switched to high resolution mode on CPU 5 [ 1.964674] Switched to high resolution mode on CPU 4 [ 1.964749] Switched to high resolution mode on CPU 7 [ 1.964966] Switched to high resolution mode on CPU 1 [ 1.969989] Switched to high resolution mode on CPU 0 [ 1.969998] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.970011] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.228142] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.228142] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.228142] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.228142] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc608000 [ 2.228142] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.228142] usb usb1: configuration #1 chosen from 1 choice [ 2.228142] hub 1-0:1.0: USB hub found [ 2.228142] hub 1-0:1.0: 8 ports detected [ 2.228142] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.228142] USB Universal Host Controller Interface driver v3.0 [ 2.228142] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.228142] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.228142] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.228142] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.228142] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 [ 2.228142] usb usb2: configuration #1 chosen from 1 choice [ 2.228142] hub 2-0:1.0: USB hub found [ 2.228142] hub 2-0:1.0: 2 ports detected [ 2.289994] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.293342] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.293348] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.298045] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.306325] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 2.311447] usb usb3: configuration #1 chosen from 1 choice [ 2.318062] hub 3-0:1.0: USB hub found [ 2.322075] hub 3-0:1.0: 2 ports detected [ 2.431244] found new irq_cfg for irq 22 [ 2.431244] 0 add_pin_to_irq: irq 22 --> apic 0 pin 22 [ 2.431244] found new irq_desc for irq 22 [ 2.431244] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.436673] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.436680] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.441397] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.449669] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 [ 2.454791] usb usb4: configuration #1 chosen from 1 choice [ 2.461395] hub 4-0:1.0: USB hub found [ 2.465407] hub 4-0:1.0: 2 ports detected [ 2.574578] found new irq_cfg for irq 23 [ 2.574578] 0 add_pin_to_irq: irq 23 --> apic 0 pin 23 [ 2.574578] found new irq_desc for irq 23 [ 2.574578] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.580007] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.580013] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.584712] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.593003] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 [ 2.598150] usb usb5: configuration #1 chosen from 1 choice [ 2.604718] hub 5-0:1.0: USB hub found [ 2.608733] hub 5-0:1.0: 2 ports detected [ 2.717911] Simple Boot Flag at 0x40 set to 0x80 [ 2.724792] audit: initializing netlink socket (disabled) [ 2.731484] type=2000 audit(1219366433.726:1): initialized [ 2.743333] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.753334] VFS: Disk quotas dquot_6.5.1 [ 2.755221] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.766667] Installing knfsd (copyright (C) 1996 [email protected]). [ 2.770319] msgmni has been set to 6531 [ 2.774691] async_tx: api initialized (async) [ 2.778128] io scheduler noop registered [ 2.782240] io scheduler anticipatory registered [ 2.787039] io scheduler deadline registered [ 2.792639] io scheduler cfq registered (default) [ 2.797918] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 2.797918] pcieport-driver 0000:00:01.0: found MSI capability [ 2.804128] found new irq_cfg for irq 33024 [ 2.804128] found new irq_desc for irq 33024 [ 2.804128] pci_express 0000:00:01.0:pcie00: allocate port service [ 2.804584] pci_express 0000:00:01.0:pcie01: allocate port service [ 2.804584] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 2.804584] pcieport-driver 0000:00:05.0: found MSI capability [ 2.807391] found new irq_cfg for irq 164096 [ 2.807405] found new irq_desc for irq 164096 [ 2.807426] pci_express 0000:00:05.0:pcie00: allocate port service [ 2.808096] pci_express 0000:00:05.0:pcie01: allocate port service [ 2.808923] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 2.809117] pcieport-driver 0000:00:09.0: found MSI capability [ 2.815332] found new irq_cfg for irq 295168 [ 2.815343] found new irq_desc for irq 295168 [ 2.815361] pci_express 0000:00:09.0:pcie00: allocate port service [ 2.815698] pci_express 0000:00:09.0:pcie01: allocate port service [ 2.816495] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.816495] pcieport-driver 0000:00:1c.0: found MSI capability [ 2.822721] found new irq_cfg for irq 917760 [ 2.822722] found new irq_desc for irq 917760 [ 2.822722] pci_express 0000:00:1c.0:pcie00: allocate port service [ 2.822722] pci_express 0000:00:1c.0:pcie02: allocate port service [ 2.822722] pci_express 0000:00:1c.0:pcie03: allocate port service [ 2.822722] pcieport-driver 0000:03:00.0: setting latency timer to 64 [ 2.822722] pci_express 0000:03:00.0:pcie11: allocate port service [ 2.822722] pcieport-driver 0000:04:00.0: setting latency timer to 64 [ 2.822722] pcieport-driver 0000:04:00.0: found MSI capability [ 2.829140] found new irq_cfg for irq 4194560 [ 2.829140] found new irq_desc for irq 4194560 [ 2.829140] pci_express 0000:04:00.0:pcie21: allocate port service [ 2.829140] pcieport-driver 0000:04:02.0: setting latency timer to 64 [ 2.829140] pcieport-driver 0000:04:02.0: found MSI capability [ 2.835337] found new irq_cfg for irq 4260096 [ 2.835337] found new irq_desc for irq 4260096 [ 2.835337] pci_express 0000:04:02.0:pcie21: allocate port service [ 2.835337] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support [ 2.835337] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support [ 2.837364] aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support [ 2.837924] ACPI: SSDT CFF04DBE, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228) [ 2.846662] processor ACPI0007:00: registered as cooling_device0 [ 2.849521] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.856998] ACPI: SSDT CFF04F9B, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228) [ 2.870207] processor ACPI0007:01: registered as cooling_device1 [ 2.871125] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.880402] ACPI: SSDT CFF05109, 016E (r1 PmRef Cpu2Ist 3000 INTL 20050228) [ 2.890408] processor ACPI0007:02: registered as cooling_device2 [ 2.892720] ACPI: Processor [CPU2] (supports 8 throttling states) [ 2.901088] ACPI: SSDT CFF05277, 016E (r1 PmRef Cpu3Ist 3000 INTL 20050228) [ 2.911304] processor ACPI0007:03: registered as cooling_device3 [ 2.917297] ACPI: Processor [CPU3] (supports 8 throttling states) [ 2.923619] ACPI: SSDT CFF053E5, 016E (r1 PmRef CPU4Ist 3000 INTL 20050228) [ 2.937917] processor ACPI0007:04: registered as cooling_device4 [ 2.939955] ACPI: Processor [CPU4] (supports 8 throttling states) [ 2.948396] ACPI: SSDT CFF05553, 016E (r1 PmRef CPU5Ist 3000 INTL 20050228) [ 2.958119] processor ACPI0007:05: registered as cooling_device5 [ 2.961626] ACPI: Processor [CPU5] (supports 8 throttling states) [ 2.971364] ACPI: SSDT CFF056C1, 016E (r1 PmRef Cpu6Ist 3000 INTL 20050228) [ 2.983963] processor ACPI0007:06: registered as cooling_device6 [ 2.983967] ACPI: Processor [CPU6] (supports 8 throttling states) [ 2.992445] ACPI: SSDT CFF0582F, 016E (r1 PmRef Cpu7Ist 3000 INTL 20050228) [ 3.003745] processor ACPI0007:07: registered as cooling_device7 [ 3.008459] ACPI: Processor [CPU7] (supports 8 throttling states) [ 3.070637] Non-volatile memory driver v1.2 [ 3.075359] intel_rng: FWH not detected [ 3.078812] Linux agpgart interface v0.103 [ 3.084583] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 3.091250] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.097917] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.103398] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.109592] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.127501] FDC 0 is a post-1991 82077 [ 3.136839] brd: module loaded [ 3.141461] loop: module loaded [ 3.143964] tun: Universal TUN/TAP device driver, 1.6 [ 3.147985] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 3.156178] console [netcon0] enabled [ 3.159608] netconsole: network logging started [ 3.164325] Uniform Multi-Platform E-IDE driver [ 3.169522] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 3.179678] Probing IDE interface ide0... [ 3.879494] hda: Optiarc DVD RW AD-7590A, ATAPI CD/DVD-ROM drive [ 4.524564] Probing IDE interface ide1... [ 5.056668] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.060420] ide1 at 0x170-0x177,0x376 on irq 15 [ 5.066634] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 974kB Cache [ 5.074600] Uniform CD-ROM driver Revision: 3.20 [ 7.728124] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 7.734949] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 7.742659] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 7.749038] Driver 'sd' needs updating - please use bus_type methods [ 7.755696] Driver 'sr' needs updating - please use bus_type methods [ 7.762300] ata_piix 0000:00:1f.1: version 2.12 [ 7.762300] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.768982] ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7] [ 7.776518] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16) [ 7.784758] ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177] [ 7.792481] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16) [ 7.800724] ata_piix 0000:00:1f.1: no available native port [ 7.807931] Fusion MPT base driver 3.04.07 [ 7.810977] Copyright (c) 1999-2008 LSI Corporation [ 7.815751] Fusion MPT SPI Host driver 3.04.07 [ 7.821617] Fusion MPT SAS Host driver 3.04.07 [ 7.826829] vendor=8086 device=244e [ 7.830165] found new irq_cfg for irq 17 [ 7.830169] 0 add_pin_to_irq: irq 17 --> apic 0 pin 17 [ 7.830177] found new irq_desc for irq 17 [ 7.830187] ohci1394 0000:09:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.890637] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dc040000-dc0407ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 7.909020] ieee1394: raw1394: /dev/raw1394 device initialized [ 7.914584] usbcore: registered new interface driver usblp [ 7.917907] Initializing USB Mass Storage driver... [ 7.924887] usbcore: registered new interface driver usb-storage [ 7.931126] USB Mass Storage support registered. [ 7.936947] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 7.946731] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.950619] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 7.957923] mice: PS/2 mouse device common for all mice [ 8.316658] md: linear personality registered for level -1 [ 8.319171] md: raid0 personality registered for level 0 [ 8.325837] md: raid1 personality registered for level 1 [ 8.331336] md: raid10 personality registered for level 10 [ 8.393333] raid6: int64x1 2954 MB/s [ 8.453333] raid6: int64x2 3541 MB/s [ 8.513333] raid6: int64x4 3431 MB/s [ 8.573333] raid6: int64x8 2300 MB/s [ 8.633333] raid6: sse2x1 3625 MB/s [ 8.693333] raid6: sse2x2 7342 MB/s [ 8.753534] raid6: sse2x4 8725 MB/s [ 8.756874] raid6: using algorithm sse2x4 (8725 MB/s) [ 8.760823] md: raid6 personality registered for level 6 [ 8.769041] md: raid5 personality registered for level 5 [ 8.774538] md: raid4 personality registered for level 4 [ 8.777091] md: multipath personality registered for level -4 [ 8.785215] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected] [ 8.794213] cpuidle: using governor ladder [ 8.797563] cpuidle: using governor menu [ 8.801923] usbcore: registered new interface driver usbhid [ 8.807756] usbhid: v2.6:USB HID core driver [ 8.812469] oprofile: using NMI interrupt. [ 8.817063] TCP cubic registered [ 8.821255] NET: Registered protocol family 10 [ 8.824775] IPv6 over IPv4 tunneling driver [ 8.831255] NET: Registered protocol family 17 [ 8.835637] RPC: Registered udp transport module. [ 8.840903] RPC: Registered tcp transport module. [ 8.847922] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 8.854088] Freeing unused kernel memory: 672k freed [ 8.857881] Write protecting the kernel read-only data: 5576k [ 9.091458] vendor=8086 device=4021 [ 9.091458] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.091458] arcmsr 0000:01:00.0: setting latency timer to 64 [ 9.104583] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.44 2008-1-31 [ 9.116650] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable) [ 9.116657] Driver Version 1.20.00.15 2008/02/27 [ 9.117082] scsi 0:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5 [ 9.116874] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 9.117707] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 9.118124] sd 0:0:0:0: [sda] Write Protect is off [ 9.118124] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 9.116668] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.118124] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 9.118124] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 9.116874] sd 0:0:0:0: [sda] Write Protect is off [ 9.116874] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 9.118124] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.118124] sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e08100002824f8] [ 9.500831] sda1 sda2 sda3 sda4 [ 9.503517] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.503517] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.504167] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 9.504583] scsi 0:0:16:0: Attached scsi generic sg1 type 3 [ 9.572084] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 9.583333] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. [ 9.598220] Adaptec aacraid driver 1.1-5[2456]-ms [ 9.703333] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 9.706666] SGI XFS Quota Management subsystem [ 9.719602] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI [ 9.719602] Copyright (c) 1999-2006 Intel Corporation. [ 13.929972] kjournald starting. Commit interval 5 seconds [ 13.929972] EXT3-fs: mounted filesystem with ordered data mode. [ 22.301270] found new irq_cfg for irq 19 [ 22.301270] 0 add_pin_to_irq: irq 19 --> apic 0 pin 19 [ 22.301270] found new irq_desc for irq 19 [ 22.301270] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.309893] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 22.309893] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060) [ 22.309893] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.314574] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 [ 22.314574] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 22.314574] vendor=8086 device=3518 [ 22.314574] vendor=8086 device=3500 [ 22.314574] vendor=8086 device=4029 [ 22.314574] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 22.314574] e1000e 0000:06:00.0: setting latency timer to 64 [ 22.391040] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:14 [ 22.391040] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 22.391040] 0000:06:00.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 22.391040] vendor=8086 device=3518 [ 22.391040] vendor=8086 device=3500 [ 22.391040] vendor=8086 device=4029 [ 22.391040] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.391040] e1000e 0000:06:00.1: setting latency timer to 64 [ 22.464373] 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:15 [ 22.464373] 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection [ 22.464373] 0000:06:00.1: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 23.297291] EXT3 FS on sda3, internal journal [ 23.463957] SMsC 37B787 watchdog component driver 1.1 initialising... [ 23.463957] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 23.840414] XFS mounting filesystem sda4 [ 23.974769] Ending clean XFS mount for filesystem: sda4 [ 24.050423] Adding 31999992k swap on /dev/sda2. Priority:-1 extents:1 across:31999992k [ 27.870000] found new irq_cfg for irq 6291712 [ 27.870000] found new irq_desc for irq 6291712 [ 27.923748] ADDRCONF(NETDEV_UP): eth0: link is not ready
Quoted 8 lines
[ 30.684580] 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 30.689997] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 41.540007] eth0: no IPv6 routers present [ 63.181453] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 63.196662] NFSD: starting 90-second grace period [ 157.601435] kjournald starting. Commit interval 5 seconds [ 157.599978] EXT3 FS on sda1, internal journal [ 157.599978] EXT3-fs: mounted filesystem with ordered data mode.
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.27-rc4-tip-00862-gcc150c8-dirty (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #3 SMP Thu Aug 21 14:45:43 HST 2008 [ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff00000 (usable) [ 0.000000] BIOS-e820: 00000000cff00000 - 00000000cff0a000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff0b000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable) [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13056MB of RAM. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1558 mtrr_trim_uncached_memory+0x522/0x54b() [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc4-tip-00862-gcc150c8-dirty #3 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80237573>] warn_on_slowpath+0x51/0x77 [ 0.000000] [<ffffffff8023808b>] printk+0x4e/0x56 [ 0.000000] [<ffffffff803b1942>] sort+0xfa/0x18c [ 0.000000] [<ffffffff80802a8e>] cmp_range+0x0/0x6 [ 0.000000] [<ffffffff8080311c>] mtrr_trim_uncached_memory+0x522/0x54b [ 0.000000] [<ffffffff802194d9>] post_set+0x20/0x3d [ 0.000000] [<ffffffff807ff4df>] setup_arch+0x39d/0x6d7 [ 0.000000] [<ffffffff8024702e>] kernel_text_address+0x9/0x26 [ 0.000000] [<ffffffff8024c4d6>] notifier_chain_register+0x14/0x55 [ 0.000000] [<ffffffff807f8a1d>] start_kernel+0x74/0x346 [ 0.000000] [<ffffffff807f8394>] x86_64_start_kernel+0xe3/0xe7 [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.000000] update e820 for mtrr [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] modified: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000ca000 - 00000000000cc000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff00000 (usable) [ 0.000000] modified: 00000000cff00000 - 00000000cff0a000 (ACPI data) [ 0.000000] modified: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS) [ 0.000000] modified: 00000000cff0b000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000430000000 (reserved) [ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff00000 page 4k [ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000 [ 0.000000] last_map_addr: cff00000 end: cff00000 [ 0.000000] RAMDISK: 37e10000 - 37fef7f3 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7020, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT CFF0395D, 005C (r1 PTLTD XSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP CFF09D60, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3) [ 0.000000] ACPI: DSDT CFF0599D, 434F (r1 Intel SEABURG 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS CFF0AFC0, 0040 [ 0.000000] ACPI: _MAR CFF09E54, 0030 (r1 Intel OEMDMAR 6040000 LOHR 1) [ 0.000000] ACPI: APIC CFF09E84, 00C8 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG CFF09F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: BOOT CFF09F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SPCR CFF09FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) [ 0.000000] ACPI: SSDT CFF039B9, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000cff00000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000cff00000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000030fdf] pages 1a [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00cff00000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00009beef0] TEXT DATA BSS ==> [0000200000 - 00009beef0] [ 0.000000] #3 [0037e10000 - 0037fef7f3] RAMDISK ==> [0037e10000 - 0037fef7f3] [ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] found SMP MP-table at [ffff8800000f7050] 000f7050 [ 0.000000] [ffffe20000000000-ffffe200033fffff] PMD -> [ffff880001200000-ffff8800045fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff00 [ 0.000000] On node 0 totalpages: 851614 [ 0.000000] DMA zone: 1846 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 834372 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec88000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000 [ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000 [ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 size:0x10 nr:256 align:0x1000 [ 0.000000] dyn_array irq_cfgx+0x0/0x8 size:0x30 nr:32 align:0x1000 [ 0.000000] dyn_array sparse_irqs+0x0/0x8 size:0x100 nr:32 align:0x1000 [ 0.000000] dyn_array total_size: 0x4000 [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 ==> [0x101c000 - 0x101d000] [ 0.000000] dyn_array irq_cfgx+0x0/0x8 ==> [0x101d000 - 0x101d600] [ 0.000000] dyn_array sparse_irqs+0x0/0x8 ==> [0x101e000 - 0x1020000] [ 0.000000] kstat_irqs ==> [0x1020000 - 0x1020400] [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] per cpu data for cpu0 on node0 at 0000000001021000 [ 0.000000] per cpu data for cpu1 on node0 at 000000000102d000 [ 0.000000] per cpu data for cpu2 on node0 at 0000000001039000 [ 0.000000] per cpu data for cpu3 on node0 at 0000000001045000 [ 0.000000] per cpu data for cpu4 on node0 at 0000000001051000 [ 0.000000] per cpu data for cpu5 on node0 at 000000000105d000 [ 0.000000] per cpu data for cpu6 on node0 at 0000000001069000 [ 0.000000] per cpu data for cpu7 on node0 at 0000000001075000 [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 836218 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] Initializing CPU#0 [ 0.000000] found new irq_desc for irq 0 [ 0.000000] found new irq_desc for irq 1 [ 0.000000] found new irq_desc for irq 2 [ 0.000000] found new irq_desc for irq 3 [ 0.000000] found new irq_desc for irq 4 [ 0.000000] found new irq_desc for irq 5 [ 0.000000] found new irq_desc for irq 6 [ 0.000000] found new irq_desc for irq 7 [ 0.000000] found new irq_desc for irq 8 [ 0.000000] found new irq_desc for irq 9 [ 0.000000] found new irq_desc for irq 10 [ 0.000000] found new irq_desc for irq 11 [ 0.000000] found new irq_desc for irq 12 [ 0.000000] found new irq_desc for irq 13 [ 0.000000] found new irq_desc for irq 14 [ 0.000000] found new irq_desc for irq 15 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 3192.011 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] console [ttyS0] enabled [ 0.003333] Checking aperture... [ 0.003333] No AGP bridge found [ 0.003333] Memory: 3342444k/3406848k available (3830k kernel code, 64012k reserved, 2175k data, 672k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.006666] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.02 BogoMIPS (lpj=10640036) [ 0.013094] Security Framework initialized [ 0.016665] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.021473] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.026664] Mount-cache hash table entries: 256 [ 0.029998] Initializing cgroup subsys ns [ 0.033331] Initializing cgroup subsys cpuacct [ 0.036664] Initializing cgroup subsys memory [ 0.039997] Initializing cgroup subsys devices [ 0.043330] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.048288] CPU: L2 cache: 6144K [ 0.051710] CPU 0/0 -> Node 0 [ 0.054866] CPU: Physical Processor ID: 0 [ 0.059059] CPU: Processor Core ID: 0 [ 0.062916] CPU0: Thermal monitoring enabled (TM2) [ 0.066662] using mwait in idle threads. [ 0.069995] ACPI: Core revision 20080609 [ 0.082417] Setting APIC routing to flat [ 0.086661] 0 add_pin_to_irq: irq 1 --> apic 0 pin 1 [ 0.086661] 0 add_pin_to_irq: irq 0 --> apic 0 pin 2 [ 0.086661] 0 add_pin_to_irq: irq 3 --> apic 0 pin 3 [ 0.086661] 0 add_pin_to_irq: irq 4 --> apic 0 pin 4 [ 0.086661] 0 add_pin_to_irq: irq 5 --> apic 0 pin 5 [ 0.086661] 0 add_pin_to_irq: irq 6 --> apic 0 pin 6 [ 0.086661] 0 add_pin_to_irq: irq 7 --> apic 0 pin 7 [ 0.086661] 0 add_pin_to_irq: irq 8 --> apic 0 pin 8 [ 0.086661] 0 add_pin_to_irq: irq 9 --> apic 0 pin 9 [ 0.086661] 0 add_pin_to_irq: irq 10 --> apic 0 pin 10 [ 0.086661] 0 add_pin_to_irq: irq 11 --> apic 0 pin 11 [ 0.086661] 0 add_pin_to_irq: irq 12 --> apic 0 pin 12 [ 0.086661] 0 add_pin_to_irq: irq 13 --> apic 0 pin 13 [ 0.086661] 0 add_pin_to_irq: irq 14 --> apic 0 pin 14 [ 0.086661] 0 add_pin_to_irq: irq 15 --> apic 0 pin 15 [ 0.086661] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.122915] CPU0: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.126658] MSR00000000: 0000000000000000 [ 0.129991] MSR00000001: 0000000000000000 [ 0.133324] MSR00000006: 0000000000000040 [ 0.136657] MSR00000010: 00000041b55b9720 [ 0.139990] MSR00000017: 0018000088e40822 [ 0.143323] MSR0000001b: 00000000fee00900 [ 0.146657] MSR00000021: 0000000000000001 [ 0.149990] MSR0000002a: 00000000c208149e [ 0.153323] MSR00000032: 0000000000000000 [ 0.156656] MSR00000033: 0000000000000000 [ 0.159989] MSR00000039: 0000000000000000 [ 0.163322] MSR0000003a: 000000000000000d [ 0.166655] MSR0000003f: 0000000000000000 [ 0.169988] MSR00000040: ffffffff8023803c [ 0.173322] MSR00000041: ffffffff8020c348 [ 0.176655] MSR00000042: ffffffff8023803c [ 0.179988] MSR00000043: ffffffff80238092 [ 0.183321] MSR00000060: ffffffff805aec51 [ 0.186654] MSR00000061: ffffffff8023802b [ 0.189987] MSR00000062: ffffffff805aec46 [ 0.193320] MSR00000063: ffffffff8023802b [ 0.196653] MSR0000008b: 0000060600000000 [ 0.199986] MSR0000009b: 0000000000000000 [ 0.203320] MSR000000a0: 00000000cff80000 [ 0.206653] MSR000000a1: 00000000fff80800 [ 0.209986] MSR000000a8: 000000000000061a [ 0.213319] MSR000000a9: 000000000000061a [ 0.216652] MSR000000aa: 000000000000061a [ 0.219985] MSR000000ab: 000000000000061a [ 0.223318] MSR000000ac: 000000000000061a [ 0.226651] MSR000000ad: 000000000000061a [ 0.229985] MSR000000c1: 0000000000000000 [ 0.233318] MSR000000c2: 0000000000000000 [ 0.236651] MSR000000c7: 130000004c000000 [ 0.239984] MSR000000cd: 0000000000000806 [ 0.243317] MSR000000ce: 001a08227f7f071a [ 0.246650] MSR000000cf: 0000000000000000 [ 0.249983] MSR000000e0: 00000000018bc0f0 [ 0.253316] MSR000000e1: 00000000f0f00000 [ 0.256649] MSR000000e2: 0000000002262201 [ 0.259983] MSR000000e3: 0000000000000000 [ 0.263316] MSR000000e4: 0000000000000000 [ 0.266649] MSR000000e5: 00000000d00208c8 [ 0.269982] MSR000000e7: 00000041d5ade028 [ 0.273315] MSR000000e8: 00000041d67ed760 [ 0.276648] MSR000000ee: 04000000877d4b01 [ 0.279981] MSR000000fe: 0000000000000d07 [ 0.283314] MSR00000116: 0000000000003fc0 [ 0.286647] MSR00000118: 00000000000f83e0 [ 0.289981] MSR0000011b: 0000000000000000 [ 0.293314] MSR0000011c: 00000000e000000c [ 0.296647] MSR0000011e: 00000000be702111 [ 0.300000] MSR0000014e: 000000006be76c2f [ 0.304286] MSR0000014f: 000000006b4036c9 [ 0.308566] MSR00000151: 000000009892ba00 [ 0.312853] MSR0000015e: 0000000000000006 [ 0.316646] MSR0000015f: 00000000001c0822 [ 0.319979] MSR00000174: 0000000000000010 [ 0.323312] MSR00000175: 0000000000000000 [ 0.326645] MSR00000176: ffffffff802288a0 [ 0.329978] MSR00000179: 0000000000000806 [ 0.333311] MSR0000017a: 0000000000000000 [ 0.336644] MSR00000186: 0000000000000000 [ 0.339977] MSR00000187: 0000000000000000 [ 0.343310] MSR00000193: 0000000000000000 [ 0.346644] MSR00000194: 0000000000000522 [ 0.349977] MSR00000198: 0822082206000822 [ 0.353310] MSR00000199: 0000000000000822 [ 0.356643] MSR0000019a: 0000000000000002 [ 0.359976] MSR0000019b: 0000000000000003 [ 0.363309] MSR0000019c: 00000000882a0000 [ 0.366642] MSR0000019d: 000000000000061a [ 0.369975] MSR0000019e: 0000000006010000 [ 0.373308] MSR0000019f: 0000000000000000 [ 0.376642] MSR000001a0: 00000060669d2489 [ 0.379975] MSR000001a1: 0000000000000000 [ 0.383308] MSR000001a2: 0000000000001000 [ 0.386641] MSR000001aa: 00000000fe7f042f [ 0.389974] MSR000001bf: 0000000000000404 [ 0.393307] MSR000001c9: 0000000000000003 [ 0.396640] MSR000001d3: 0000000000008000 [ 0.399973] MSR000001d9: 0000000000000001 [ 0.403307] MSR000001db: ffffffff805aec78 [ 0.406640] MSR000001dc: ffffffff805aec46 [ 0.409973] MSR000001dd: ffffffff8023800a [ 0.413306] MSR000001de: ffffffff80238026 [ 0.416639] MSR000001e0: 0000000000000ff0 [ 0.419972] MSR000001f8: 0000000000000001 [ 0.423305] MSR000001f9: 0000000000000001 [ 0.426638] MSR000001fa: 0000000000008c89 [ 0.429971] MSR00000200: 00000000d0000000 [ 0.433305] MSR00000201: 0000000ff0000800 [ 0.436638] MSR00000202: 00000000e0000000 [ 0.439971] MSR00000203: 0000000fe0000800 [ 0.443304] MSR00000204: 0000000000000006 [ 0.446637] MSR00000205: 0000000c00000800 [ 0.449970] MSR00000206: 0000000400000006 [ 0.453303] MSR00000207: 0000000fe0000800 [ 0.456636] MSR00000208: 0000000420000006 [ 0.459970] MSR00000209: 0000000ff0000800 [ 0.463303] MSR0000020a: 0000000000000000 [ 0.466636] MSR0000020b: 0000000000000000 [ 0.469969] MSR0000020c: 0000000000000000 [ 0.473302] MSR0000020d: 0000000000000000 [ 0.476635] MSR00000250: 0606060606060606 [ 0.479968] MSR00000258: 0606060606060606 [ 0.483301] MSR00000259: 0000000000000000 [ 0.486634] MSR00000268: 0505050505050505 [ 0.489968] MSR00000269: 0505050505050505 [ 0.493301] MSR0000026a: 0000000000000000 [ 0.496634] MSR0000026b: 0000000000000000 [ 0.499967] MSR0000026c: 0505050505050505 [ 0.503300] MSR0000026d: 0505050505050505 [ 0.506633] MSR0000026e: 0505050505050505 [ 0.509967] MSR0000026f: 0505050505050505 [ 0.513300] MSR00000277: 0007010600070106 [ 0.516633] MSR000002ff: 0000000000000c00 [ 0.519967] MSR00000309: 0000000000000000 [ 0.523300] MSR0000030a: 0000000000000000 [ 0.526633] MSR0000030b: 0000000000000000 [ 0.529967] MSR00000345: 00000000000010c2 [ 0.533300] MSR0000038d: 0000000000000000 [ 0.536633] MSR0000038e: 0000000000000000 [ 0.539967] MSR0000038f: ffffffffffffffff [ 0.543300] MSR00000390: ffffffffffffffff [ 0.546633] MSR000003f1: 0000000000000000 [ 0.549967] MSR00000400: 00000000c208149e [ 0.553300] MSR00000401: 1000000000000000 [ 0.556633] MSR00000402: 0000000000000000 [ 0.559967] MSR00000404: 0000000000000001 [ 0.563300] MSR00000405: 0000000000000000 [ 0.566633] MSR00000406: 000002a9000002a9 [ 0.569967] MSR00000408: 0000000000000001 [ 0.573300] MSR00000409: 0000000000000000 [ 0.576633] MSR0000040a: 000002a9000002a9 [ 0.579967] MSR0000040c: 0000000000000001 [ 0.583300] MSR0000040d: 0020000000000000 [ 0.586633] MSR0000040e: 00000077cdb7ed9b [ 0.589967] MSR00000410: 0000000000000008 [ 0.593300] MSR00000411: 0000000000000011 [ 0.596633] MSR00000414: 0000000000000001 [ 0.599967] MSR00000415: 1000001004000e0f [ 0.603300] MSRc0000080: 0000000000000d01 [ 0.606633] MSRc0000081: 0023001000000000 [ 0.609967] MSRc0000082: ffffffff8020bce0 [ 0.613300] MSRc0000083: ffffffff80228ab0 [ 0.616633] MSRc0000084: 0000000000003700 [ 0.619967] MSRc0000100: 0000000000000000 [ 0.623300] MSRc0000101: ffffffff807e6c00 [ 0.626633] MSRc0000102: 0000000000000000 [ 0.633300] APIC timer calibration result 24937641 [ 0.633300] Detected 24.937 MHz APIC timer. [ 0.636633] Booting processor 1/4 ip 6000 [ 0.649957] Initializing CPU#1 [ 0.649957] Calibrating delay using timer specific routine.. 6386.11 BogoMIPS (lpj=10640182) [ 0.649957] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.649957] CPU: L2 cache: 6144K [ 0.649957] CPU 1/4 -> Node 0 [ 0.649957] CPU: Physical Processor ID: 1 [ 0.649957] CPU: Processor Core ID: 0 [ 0.649957] CPU1: Thermal monitoring enabled (TM2) [ 0.649957] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.733300] CPU1: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.739967] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.743300] Booting processor 2/1 ip 6000 [ 0.756617] Initializing CPU#2 [ 0.756617] Calibrating delay using timer specific routine.. 6386.10 BogoMIPS (lpj=10640164) [ 0.756617] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.756617] CPU: L2 cache: 6144K [ 0.756617] CPU 2/1 -> Node 0 [ 0.756617] CPU: Physical Processor ID: 0 [ 0.756617] CPU: Processor Core ID: 1 [ 0.756617] CPU2: Thermal monitoring enabled (TM2) [ 0.756617] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.839967] CPU2: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.846633] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.849967] Booting processor 3/5 ip 6000 [ 0.863277] Initializing CPU#3 [ 0.863277] Calibrating delay using timer specific routine.. 6386.10 BogoMIPS (lpj=10640174) [ 0.863277] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.863277] CPU: L2 cache: 6144K [ 0.863277] CPU 3/5 -> Node 0 [ 0.863277] CPU: Physical Processor ID: 1 [ 0.863277] CPU: Processor Core ID: 1 [ 0.863277] CPU3: Thermal monitoring enabled (TM2) [ 0.863277] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.946633] CPU3: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.953300] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.956633] Booting processor 4/2 ip 6000 [ 0.969936] Initializing CPU#4 [ 0.969936] Calibrating delay using timer specific routine.. 6386.07 BogoMIPS (lpj=10640121) [ 0.969936] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.969936] CPU: L2 cache: 6144K [ 0.969936] CPU 4/2 -> Node 0 [ 0.969936] CPU: Physical Processor ID: 0 [ 0.969936] CPU: Processor Core ID: 2 [ 0.969936] CPU4: Thermal monitoring enabled (TM2) [ 0.969936] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 1.053300] CPU4: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 1.061399] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 1.066633] Booting processor 5/6 ip 6000 [ 1.079929] Initializing CPU#5 [ 1.079929] Calibrating delay using timer specific routine.. 6386.09 BogoMIPS (lpj=10640150) [ 1.079929] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.079929] CPU: L2 cache: 6144K [ 1.079929] CPU 5/6 -> Node 0 [ 1.079929] CPU: Physical Processor ID: 1 [ 1.079929] CPU: Processor Core ID: 2 [ 1.079929] CPU5: Thermal monitoring enabled (TM2) [ 1.079929] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 1.163300] CPU5: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 1.169967] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 1.173300] Booting processor 6/3 ip 6000 [ 1.186589] Initializing CPU#6 [ 1.186589] Calibrating delay using timer specific routine.. 6386.09 BogoMIPS (lpj=10640151) [ 1.186589] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.186589] CPU: L2 cache: 6144K [ 1.186589] CPU 6/3 -> Node 0 [ 1.186589] CPU: Physical Processor ID: 0 [ 1.186589] CPU: Processor Core ID: 3 [ 1.186589] CPU6: Thermal monitoring enabled (TM2) [ 1.186589] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 1.269967] CPU6: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 1.276633] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 1.279967] Booting processor 7/7 ip 6000 [ 1.293249] Initializing CPU#7 [ 1.293249] Calibrating delay using timer specific routine.. 6386.09 BogoMIPS (lpj=10640157) [ 1.293249] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.293249] CPU: L2 cache: 6144K [ 1.293249] CPU 7/7 -> Node 0 [ 1.293249] CPU: Physical Processor ID: 1 [ 1.293249] CPU: Processor Core ID: 3 [ 1.293249] CPU7: Thermal monitoring enabled (TM2) [ 1.293249] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 1.376633] CPU7: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 1.383300] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 1.386633] Brought up 8 CPUs [ 1.389797] Total of 8 processors activated (51093.70 BogoMIPS). [ 1.393300] net_namespace: 864 bytes [ 1.396633] xor: automatically using best checksumming function: generic_sse [ 1.415712] generic_sse: 11872.800 MB/sec [ 1.419967] xor: using function: generic_sse (11872.800 MB/sec) [ 1.423300] NET: Registered protocol family 16 [ 1.426633] No dock devices found. [ 1.429967] ACPI: bus type pci registered [ 1.433300] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8 [ 1.436633] PCI: MCFG area at e0000000 reserved in E820 [ 1.439967] PCI: Using MMCONFIG at e0000000 - e08fffff [ 1.443300] PCI: Using configuration type 1 for base access [ 1.449967] ACPI: EC: Look up EC in DSDT [ 1.453300] ACPI: Interpreter enabled [ 1.456633] ACPI: (supports S0 S3 S4 S5) [ 1.459967] ACPI: Using IOAPIC for interrupt routing [ 1.466633] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.470863] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.476633] pci 0000:00:00.0: PME# disabled [ 1.479967] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.483300] pci 0000:00:01.0: PME# disabled [ 1.486633] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 1.489967] pci 0000:00:05.0: PME# disabled [ 1.493300] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.496633] pci 0000:00:09.0: PME# disabled [ 1.499967] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.503300] pci 0000:00:1b.0: PME# disabled [ 1.506633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.509967] pci 0000:00:1c.0: PME# disabled [ 1.513300] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.516633] pci 0000:00:1d.7: PME# disabled [ 1.519967] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 1.519967] pci 0000:01:00.0: supports D1 [ 1.519967] PCI: bridge 0000:00:01.0 32bit mmio: [dc100000, dc1fffff] [ 1.523300] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.526633] pci 0000:03:00.0: PME# disabled [ 1.529967] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold [ 1.533300] pci 0000:03:00.3: PME# disabled [ 1.536633] PCI: bridge 0000:00:09.0 io port: [2000, 2fff] [ 1.539967] PCI: bridge 0000:00:09.0 32bit mmio: [dc200000, dc3fffff] [ 1.543300] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.546633] pci 0000:04:00.0: PME# disabled [ 1.549967] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold [ 1.553300] pci 0000:04:02.0: PME# disabled [ 1.556633] PCI: bridge 0000:03:00.0 io port: [2000, 2fff] [ 1.559967] PCI: bridge 0000:03:00.0 32bit mmio: [dc200000, dc2fffff] [ 1.563300] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.566633] pci 0000:06:00.0: PME# disabled [ 1.569967] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold [ 1.573300] pci 0000:06:00.1: PME# disabled [ 1.576633] PCI: bridge 0000:04:02.0 io port: [2000, 2fff] [ 1.579967] PCI: bridge 0000:04:02.0 32bit mmio: [dc200000, dc2fffff] [ 1.583300] pci 0000:09:05.0: supports D1 [ 1.583300] pci 0000:09:05.0: supports D2 [ 1.583300] pci 0000:09:06.0: supports D2 [ 1.583300] pci 0000:09:06.0: PME# supported from D2 D3hot D3cold [ 1.586633] pci 0000:09:06.0: PME# disabled [ 1.589967] pci 0000:00:1e.0: transparent bridge [ 1.593300] PCI: bridge 0000:00:1e.0 io port: [3000, 3fff] [ 1.596633] PCI: bridge 0000:00:1e.0 32bit mmio: [dc000000, dc0fffff] [ 1.599967] PCI: bridge 0000:00:1e.0 64bit mmio pref: [d8000000, dbffffff] [ 1.603300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.603300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.603300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 1.603300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 1.603300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0._PRT] [ 1.604197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD0._PRT] [ 1.604391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD2._PRT] [ 1.604666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT] [ 1.605067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.605558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 1.613300] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15) [ 1.619751] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.626434] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.633102] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.639751] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) [ 1.646418] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15) [ 1.652855] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15) [ 1.656633] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9 [ 1.663300] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1.666633] pnp: PnP ACPI init [ 1.669944] ACPI: bus type pnp registered [ 1.676633] pnp: PnP ACPI: found 11 devices [ 1.679967] ACPI: ACPI bus type pnp unregistered [ 1.683300] SCSI subsystem initialized [ 1.686633] libata version 3.00 loaded. [ 1.686634] usbcore: registered new interface driver usbfs [ 1.689967] usbcore: registered new interface driver hub [ 1.693300] usbcore: registered new device driver usb [ 1.696633] PCI: Using ACPI for IRQ routing [ 1.713505] PCI-GART: No AMD northbridge found. [ 1.718345] hpet clockevent registered [ 1.718447] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.723862] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.730905] ACPI: RTC can wake from S4 [ 1.743689] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 1.748303] system 00:01: ioport range 0x800-0x80f has been reserved [ 1.754838] system 00:01: ioport range 0x1000-0x107f has been reserved [ 1.761474] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 1.768196] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 1.774917] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 1.782739] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 1.790573] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.798404] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.805738] system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved [ 1.813067] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved [ 1.820401] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved [ 1.832655] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.834985] pci 0000:00:01.0: IO window: disabled [ 1.840048] pci 0000:00:01.0: MEM window: 0xdc100000-0xdc1fffff [ 1.846325] pci 0000:00:01.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff [ 1.854219] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02 [ 1.860343] pci 0000:00:05.0: IO window: disabled [ 1.865418] pci 0000:00:05.0: MEM window: disabled [ 1.870576] pci 0000:00:05.0: PREFETCH window: disabled [ 1.876177] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 [ 1.882289] pci 0000:04:00.0: IO window: disabled [ 1.887362] pci 0000:04:00.0: MEM window: disabled [ 1.892520] pci 0000:04:00.0: PREFETCH window: disabled [ 1.898121] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06 [ 1.904247] pci 0000:04:02.0: IO window: 0x2000-0x2fff [ 1.909760] pci 0000:04:02.0: MEM window: 0xdc200000-0xdc2fffff [ 1.916054] pci 0000:04:02.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.923971] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 1.930102] pci 0000:03:00.0: IO window: 0x2000-0x2fff [ 1.935613] pci 0000:03:00.0: MEM window: 0xdc200000-0xdc2fffff [ 1.941915] pci 0000:03:00.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.949834] pci 0000:03:00.3: PCI bridge, secondary bus 0000:07 [ 1.955954] pci 0000:03:00.3: IO window: disabled [ 1.961040] pci 0000:03:00.3: MEM window: disabled [ 1.966203] pci 0000:03:00.3: PREFETCH window: disabled [ 1.971812] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 1.977930] pci 0000:00:09.0: IO window: 0x2000-0x2fff [ 1.983441] pci 0000:00:09.0: MEM window: 0xdc200000-0xdc3fffff [ 1.990187] pci 0000:00:09.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.998105] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 2.004230] pci 0000:00:1c.0: IO window: disabled [ 2.009311] pci 0000:00:1c.0: MEM window: disabled [ 2.014479] pci 0000:00:1c.0: PREFETCH window: disabled [ 2.020078] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 2.030353] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 2.035868] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff [ 2.042161] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff [ 2.050083] found new irq_cfg for irq 16 [ 2.050093] 0 add_pin_to_irq: irq 16 --> apic 0 pin 16 [ 2.050105] found new irq_desc for irq 16 [ 2.050120] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.056989] pci 0000:00:01.0: setting latency timer to 64 [ 2.056996] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.063888] pci 0000:00:05.0: setting latency timer to 64 [ 2.063894] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.070786] pci 0000:00:09.0: setting latency timer to 64 [ 2.070792] vendor=8086 device=4029 [ 2.074468] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.081368] pci 0000:03:00.0: setting latency timer to 64 [ 2.081375] vendor=8086 device=3500 [ 2.085054] vendor=8086 device=4029 [ 2.088736] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.095631] pci 0000:04:00.0: setting latency timer to 64 [ 2.095637] vendor=8086 device=3500 [ 2.099318] vendor=8086 device=4029 [ 2.103003] found new irq_cfg for irq 18 [ 2.103005] 0 add_pin_to_irq: irq 18 --> apic 0 pin 18 [ 2.103009] found new irq_desc for irq 18 [ 2.103015] pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.109910] pci 0000:04:02.0: setting latency timer to 64 [ 2.109918] pci 0000:03:00.3: setting latency timer to 64 [ 2.109931] found new irq_cfg for irq 21 [ 2.109944] 0 add_pin_to_irq: irq 21 --> apic 0 pin 21 [ 2.109959] found new irq_desc for irq 21 [ 2.109975] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.116824] pci 0000:00:1c.0: setting latency timer to 64 [ 2.116831] pci 0000:00:1e.0: setting latency timer to 64 [ 2.116840] bus: 00 index 0 io port: [0, ffff] [ 2.121479] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 2.126891] bus: 01 index 0 mmio: [0, 0] [ 2.131022] bus: 01 index 1 mmio: [dc100000, dc1fffff] [ 2.136356] bus: 01 index 2 mmio: [d1000000, d10fffff] [ 2.141694] bus: 01 index 3 mmio: [0, 0] [ 2.145813] bus: 02 index 0 mmio: [0, 0] [ 2.149932] bus: 02 index 1 mmio: [0, 0] [ 2.154046] bus: 02 index 2 mmio: [0, 0] [ 2.158167] bus: 02 index 3 mmio: [0, 0] [ 2.162283] bus: 03 index 0 io port: [2000, 2fff] [ 2.167181] bus: 03 index 1 mmio: [dc200000, dc3fffff] [ 2.172513] bus: 03 index 2 mmio: [d1100000, d11fffff] [ 2.177850] bus: 03 index 3 mmio: [0, 0] [ 2.181971] bus: 04 index 0 io port: [2000, 2fff] [ 2.186874] bus: 04 index 1 mmio: [dc200000, dc2fffff] [ 2.192212] bus: 04 index 2 mmio: [d1100000, d11fffff] [ 2.197548] bus: 04 index 3 mmio: [0, 0] [ 2.201665] bus: 05 index 0 mmio: [0, 0] [ 2.205781] bus: 05 index 1 mmio: [0, 0] [ 2.209896] bus: 05 index 2 mmio: [0, 0] [ 2.214013] bus: 05 index 3 mmio: [0, 0] [ 2.218131] bus: 06 index 0 io port: [2000, 2fff] [ 2.223030] bus: 06 index 1 mmio: [dc200000, dc2fffff] [ 2.228370] bus: 06 index 2 mmio: [d1100000, d11fffff] [ 2.233708] bus: 06 index 3 mmio: [0, 0] [ 2.237829] bus: 07 index 0 mmio: [0, 0] [ 2.241957] bus: 07 index 1 mmio: [0, 0] [ 2.246631] bus: 07 index 2 mmio: [0, 0] [ 2.250751] bus: 07 index 3 mmio: [0, 0] [ 2.254869] bus: 08 index 0 mmio: [0, 0] [ 2.258986] bus: 08 index 1 mmio: [0, 0] [ 2.263102] bus: 08 index 2 mmio: [0, 0] [ 2.267218] bus: 08 index 3 mmio: [0, 0] [ 2.271335] bus: 09 index 0 io port: [3000, 3fff] [ 2.276234] bus: 09 index 1 mmio: [dc000000, dc0fffff] [ 2.281574] bus: 09 index 2 mmio: [d8000000, dbffffff] [ 2.286911] bus: 09 index 3 io port: [0, ffff] [ 2.291545] bus: 09 index 4 mmio: [0, ffffffffffffffff] [ 2.296970] NET: Registered protocol family 2 [ 2.334969] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.340269] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.351636] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.357980] TCP: Hash tables configured (established 524288 bind 65536) [ 2.364793] TCP reno registered [ 2.378268] NET: Registered protocol family 1 [ 2.381720] checking if image is initramfs... it is [ 2.434970] Freeing initrd memory: 1917k freed [ 2.441636] pci 0000:09:05.0: Boot video device [ 2.445263] input: Power Button (FF) as /class/input/input0 [ 2.445265] ACPI: Power Button (FF) [PWRF] [ 2.452320] input: Power Button (CM) as /class/input/input1 [ 2.455549] ACPI: Power Button (CM) [PWRB] [ 2.454796] Switched to high resolution mode on CPU 7 [ 2.455171] Switched to high resolution mode on CPU 4 [ 2.457532] Switched to high resolution mode on CPU 2 [ 2.457576] Switched to high resolution mode on CPU 3 [ 2.457589] Switched to high resolution mode on CPU 1 [ 2.457624] Switched to high resolution mode on CPU 6 [ 2.457627] Switched to high resolution mode on CPU 5 [ 2.459843] Switched to high resolution mode on CPU 0 [ 2.462575] found new irq_cfg for irq 20 [ 2.462575] 0 add_pin_to_irq: irq 20 --> apic 0 pin 20 [ 2.462575] found new irq_desc for irq 20 [ 2.462575] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.705697] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.705697] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.707907] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.707907] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.707907] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.707907] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc608000 [ 2.707907] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.707907] usb usb1: configuration #1 chosen from 1 choice [ 2.707907] hub 1-0:1.0: USB hub found [ 2.707907] hub 1-0:1.0: 8 ports detected [ 2.707907] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.707907] USB Universal Host Controller Interface driver v3.0 [ 2.707907] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.707907] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.707907] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.707907] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.707907] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 [ 2.707907] usb usb2: configuration #1 chosen from 1 choice [ 2.707907] hub 2-0:1.0: USB hub found [ 2.707907] hub 2-0:1.0: 2 ports detected [ 2.786661] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.790008] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.790015] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.794711] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.802996] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 2.808114] usb usb3: configuration #1 chosen from 1 choice [ 2.814729] hub 3-0:1.0: USB hub found [ 2.818747] hub 3-0:1.0: 2 ports detected [ 2.927911] found new irq_cfg for irq 22 [ 2.927911] 0 add_pin_to_irq: irq 22 --> apic 0 pin 22 [ 2.927911] found new irq_desc for irq 22 [ 2.927911] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.933339] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.933346] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.938063] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.946334] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 [ 2.951458] usb usb4: configuration #1 chosen from 1 choice [ 2.958062] hub 4-0:1.0: USB hub found [ 2.962073] hub 4-0:1.0: 2 ports detected [ 3.071244] found new irq_cfg for irq 23 [ 3.071244] 0 add_pin_to_irq: irq 23 --> apic 0 pin 23 [ 3.071244] found new irq_desc for irq 23 [ 3.071244] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.076673] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.076680] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.081378] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.089671] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 [ 3.094781] usb usb5: configuration #1 chosen from 1 choice [ 3.101419] hub 5-0:1.0: USB hub found [ 3.105452] hub 5-0:1.0: 2 ports detected [ 3.214578] Simple Boot Flag at 0x40 set to 0x80 [ 3.221460] audit: initializing netlink socket (disabled) [ 3.228152] type=2000 audit(1219367217.223:1): initialized [ 3.240000] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.248712] VFS: Disk quotas dquot_6.5.1 [ 3.253731] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.261868] Installing knfsd (copyright (C) 1996 [email protected]). [ 3.267439] msgmni has been set to 6531 [ 3.271956] async_tx: api initialized (async) [ 3.275072] io scheduler noop registered [ 3.279185] io scheduler anticipatory registered [ 3.283985] io scheduler deadline registered [ 3.290630] io scheduler cfq registered (default) [ 3.296680] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 3.296680] pcieport-driver 0000:00:01.0: found MSI capability [ 3.298233] found new irq_cfg for irq 33024 [ 3.298250] found new irq_desc for irq 33024 [ 3.298275] pci_express 0000:00:01.0:pcie00: allocate port service [ 3.301251] pci_express 0000:00:01.0:pcie01: allocate port service [ 3.301251] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 3.301251] pcieport-driver 0000:00:05.0: found MSI capability [ 3.304452] found new irq_cfg for irq 164096 [ 3.304466] found new irq_desc for irq 164096 [ 3.304488] pci_express 0000:00:05.0:pcie00: allocate port service [ 3.307918] pci_express 0000:00:05.0:pcie01: allocate port service [ 3.307918] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 3.307918] pcieport-driver 0000:00:09.0: found MSI capability [ 3.310679] found new irq_cfg for irq 295168 [ 3.310691] found new irq_desc for irq 295168 [ 3.310709] pci_express 0000:00:09.0:pcie00: allocate port service [ 3.313733] pci_express 0000:00:09.0:pcie01: allocate port service [ 3.313733] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 3.313733] pcieport-driver 0000:00:1c.0: found MSI capability [ 3.319949] found new irq_cfg for irq 917760 [ 3.319949] found new irq_desc for irq 917760 [ 3.319949] pci_express 0000:00:1c.0:pcie00: allocate port service [ 3.320630] pci_express 0000:00:1c.0:pcie02: allocate port service [ 3.320630] pci_express 0000:00:1c.0:pcie03: allocate port service [ 3.320630] pcieport-driver 0000:03:00.0: setting latency timer to 64 [ 3.320630] pci_express 0000:03:00.0:pcie11: allocate port service [ 3.320630] pcieport-driver 0000:04:00.0: setting latency timer to 64 [ 3.320630] pcieport-driver 0000:04:00.0: found MSI capability [ 3.326465] found new irq_cfg for irq 4194560 [ 3.326465] found new irq_desc for irq 4194560 [ 3.326465] pci_express 0000:04:00.0:pcie21: allocate port service [ 3.327297] pcieport-driver 0000:04:02.0: setting latency timer to 64 [ 3.327297] pcieport-driver 0000:04:02.0: found MSI capability [ 3.332889] found new irq_cfg for irq 4260096 [ 3.332889] found new irq_desc for irq 4260096 [ 3.332889] pci_express 0000:04:02.0:pcie21: allocate port service [ 3.332889] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support [ 3.332889] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support [ 3.332889] aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support [ 3.337080] ACPI: SSDT CFF04DBE, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228) [ 3.347297] processor ACPI0007:00: registered as cooling_device0 [ 3.347325] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.354323] ACPI: SSDT CFF04F9B, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228) [ 3.367291] processor ACPI0007:01: registered as cooling_device1 [ 3.370214] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.377533] ACPI: SSDT CFF05109, 016E (r1 PmRef Cpu2Ist 3000 INTL 20050228) [ 3.387291] processor ACPI0007:02: registered as cooling_device2 [ 3.389833] ACPI: Processor [CPU2] (supports 8 throttling states) [ 3.397307] ACPI: SSDT CFF05277, 016E (r1 PmRef Cpu3Ist 3000 INTL 20050228) [ 3.408341] processor ACPI0007:03: registered as cooling_device3 [ 3.413963] ACPI: Processor [CPU3] (supports 8 throttling states) [ 3.421090] ACPI: SSDT CFF053E5, 016E (r1 PmRef CPU4Ist 3000 INTL 20050228) [ 3.430823] processor ACPI0007:04: registered as cooling_device4 [ 3.432883] ACPI: Processor [CPU4] (supports 8 throttling states) [ 3.441307] ACPI: SSDT CFF05553, 016E (r1 PmRef CPU5Ist 3000 INTL 20050228) [ 3.454362] processor ACPI0007:05: registered as cooling_device5 [ 3.454528] ACPI: Processor [CPU5] (supports 8 throttling states) [ 3.462336] ACPI: SSDT CFF056C1, 016E (r1 PmRef Cpu6Ist 3000 INTL 20050228) [ 3.473963] processor ACPI0007:06: registered as cooling_device6 [ 3.476077] ACPI: Processor [CPU6] (supports 8 throttling states) [ 3.484457] ACPI: SSDT CFF0582F, 016E (r1 PmRef Cpu7Ist 3000 INTL 20050228) [ 3.494791] processor ACPI0007:07: registered as cooling_device7 [ 3.497635] ACPI: Processor [CPU7] (supports 8 throttling states) [ 3.563951] Non-volatile memory driver v1.2 [ 3.568103] intel_rng: FWH not detected [ 3.570824] Linux agpgart interface v0.103 [ 3.577922] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 3.584588] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.588292] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.597922] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.602485] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.623390] FDC 0 is a post-1991 82077 [ 3.630626] brd: module loaded [ 3.634590] loop: module loaded [ 3.637313] tun: Universal TUN/TAP device driver, 1.6 [ 3.641651] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 3.648953] console [netcon0] enabled [ 3.652945] netconsole: network logging started [ 3.661810] Uniform Multi-Platform E-IDE driver [ 3.670624] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 3.677568] Probing IDE interface ide0... [ 4.376078] hda: Optiarc DVD RW AD-7590A, ATAPI CD/DVD-ROM drive [ 5.021230] Probing IDE interface ide1... [ 5.553938] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.557078] ide1 at 0x170-0x177,0x376 on irq 15 [ 5.563300] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 974kB Cache [ 5.571326] Uniform CD-ROM driver Revision: 3.20 [ 8.173973] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 8.187916] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 8.194583] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 8.201249] Driver 'sd' needs updating - please use bus_type methods [ 8.207916] Driver 'sr' needs updating - please use bus_type methods [ 8.214583] ata_piix 0000:00:1f.1: version 2.12 [ 8.214583] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8.218242] ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7] [ 8.225985] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16) [ 8.233546] ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177] [ 8.241277] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16) [ 8.249568] ata_piix 0000:00:1f.1: no available native port [ 8.260193] Fusion MPT base driver 3.04.07 [ 8.260627] Copyright (c) 1999-2008 LSI Corporation [ 8.265049] Fusion MPT SPI Host driver 3.04.07 [ 8.271425] Fusion MPT SAS Host driver 3.04.07 [ 8.276666] vendor=8086 device=244e [ 8.279459] found new irq_cfg for irq 17 [ 8.279463] 0 add_pin_to_irq: irq 17 --> apic 0 pin 17 [ 8.279471] found new irq_desc for irq 17 [ 8.279482] ohci1394 0000:09:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8.340583] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dc040000-dc0407ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 8.357645] ieee1394: raw1394: /dev/raw1394 device initialized [ 8.363958] usbcore: registered new interface driver usblp [ 8.370094] Initializing USB Mass Storage driver... [ 8.375180] usbcore: registered new interface driver usb-storage [ 8.381432] USB Mass Storage support registered. [ 8.386256] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 8.389827] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.398867] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.407297] mice: PS/2 mouse device common for all mice [ 8.768114] md: linear personality registered for level -1 [ 8.770584] md: raid0 personality registered for level 0 [ 8.777250] md: raid1 personality registered for level 1 [ 8.782757] md: raid10 personality registered for level 10 [ 8.843631] raid6: int64x1 2951 MB/s [ 8.901540] raid6: int64x2 3587 MB/s [ 8.961537] raid6: int64x4 3434 MB/s [ 9.021537] raid6: int64x8 2294 MB/s [ 9.081527] raid6: sse2x1 3639 MB/s [ 9.141526] raid6: sse2x2 7362 MB/s [ 9.201528] raid6: sse2x4 8784 MB/s [ 9.205197] raid6: using algorithm sse2x4 (8784 MB/s) [ 9.210443] md: raid6 personality registered for level 6 [ 9.217109] md: raid5 personality registered for level 5 [ 9.222620] md: raid4 personality registered for level 4 [ 9.228116] md: multipath personality registered for level -4 [ 9.236249] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected] [ 9.245238] cpuidle: using governor ladder [ 9.248588] cpuidle: using governor menu [ 9.254583] usbcore: registered new interface driver usbhid [ 9.257000] usbhid: v2.6:USB HID core driver [ 9.267296] oprofile: using NMI interrupt. [ 9.267513] TCP cubic registered [ 9.272634] NET: Registered protocol family 10 [ 9.275787] IPv6 over IPv4 tunneling driver [ 9.283963] NET: Registered protocol family 17 [ 9.287397] RPC: Registered udp transport module. [ 9.289993] RPC: Registered tcp transport module. [ 9.301041] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 9.307291] Freeing unused kernel memory: 672k freed [ 9.312235] Write protecting the kernel read-only data: 5576k [ 9.536668] vendor=8086 device=4021 [ 9.536668] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.536668] arcmsr 0000:01:00.0: setting latency timer to 64 [ 9.550416] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.44 2008-1-31 [ 9.563315] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable) [ 9.563322] Driver Version 1.20.00.15 2008/02/27 [ 9.563683] scsi 0:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5 [ 9.567498] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 9.567498] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 9.564413] sd 0:0:0:0: [sda] Write Protect is off [ 9.564413] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 9.567498] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.567498] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 9.567498] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 9.567498] sd 0:0:0:0: [sda] Write Protect is off [ 9.567498] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 9.564413] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.564413] sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e08100002824f8] [ 9.946813] sda1 sda2 sda3 sda4 [ 9.953728] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.953729] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.953729] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 9.953729] scsi 0:0:16:0: Attached scsi generic sg1 type 3 [ 10.018125] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 10.028328] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. [ 10.046666] Adaptec aacraid driver 1.1-5[2456]-ms [ 10.150417] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 10.153326] SGI XFS Quota Management subsystem [ 10.167083] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI [ 10.167083] Copyright (c) 1999-2006 Intel Corporation. [ 14.359992] kjournald starting. Commit interval 5 seconds [ 14.359992] EXT3-fs: mounted filesystem with ordered data mode. [ 22.758123] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 [ 22.758123] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 22.758123] vendor=8086 device=3518 [ 22.758123] vendor=8086 device=3500 [ 22.758123] vendor=8086 device=4029 [ 22.758123] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 22.758123] e1000e 0000:06:00.0: setting latency timer to 64 [ 22.766666] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 22.766666] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060) [ 22.766666] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.768604] found new irq_cfg for irq 19 [ 22.768604] 0 add_pin_to_irq: irq 19 --> apic 0 pin 19 [ 22.768604] found new irq_desc for irq 19 [ 22.768604] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.830831] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:14 [ 22.830831] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 22.831454] 0000:06:00.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 22.833331] vendor=8086 device=3518 [ 22.833331] vendor=8086 device=3500 [ 22.833331] vendor=8086 device=4029 [ 22.833331] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.833331] e1000e 0000:06:00.1: setting latency timer to 64 [ 22.908421] 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:15 [ 22.908421] 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection [ 22.908421] 0000:06:00.1: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 23.601457] EXT3 FS on sda3, internal journal [ 23.770624] SMsC 37B787 watchdog component driver 1.1 initialising... [ 23.770624] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 24.207105] XFS mounting filesystem sda4 [ 24.297702] Ending clean XFS mount for filesystem: sda4 [ 24.416721] Adding 31999992k swap on /dev/sda2. Priority:-1 extents:1 across:31999992k [ 28.213333] found new irq_cfg for irq 6291712 [ 28.213333] found new irq_desc for irq 6291712 [ 28.266415] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.071026] 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 31.073990] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 41.299996] eth0: no IPv6 routers present [ 63.503953] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 63.513536] NFSD: starting 90-second grace period
Quoted 17 lines · Joshua Hoblitt
Ugh - I just realized I forgot to type "-dirty" into grub after rebuilding the kernel. Here is the new dmesg with the msr trace.
-J
--
Quoted 10 lines · Joshua Hoblitt
I have applied your patch to the tip tree and rebuilt. Still no msr dump.
-J
--
Quoted 3 lines · Joshua Hoblitt
Lol. No - I thought you implied it was in the tip tree. Sigh. I'll try again.
[ 0.429971] MSR00000200: 00000000d0000000 [ 0.433305] MSR00000201: 0000000ff0000800
==> base: 0xd0000000 size: 0x10000000 UC
[ 0.436638] MSR00000202: 00000000e0000000 [ 0.439971] MSR00000203: 0000000fe0000800
==> base: 0xe000000 size: 0x2000000 UC
[ 0.443304] MSR00000204: 0000000000000006 [ 0.446637] MSR00000205: 0000000c00000800
==> base: 0 size 16G WB
[ 0.449970] MSR00000206: 0000000400000006 [ 0.453303] MSR00000207: 0000000fe0000800
==> base: 16G, size: 128M WB
[ 0.456636] MSR00000208: 0000000420000006 [ 0.459970] MSR00000209: 0000000ff0000800
==> base: 16g+128M, size 64M WB
[ 0.463303] MSR0000020a: 0000000000000000 [ 0.466636] MSR0000020b: 0000000000000000
[ 0.469969] MSR0000020c: 0000000000000000 [ 0.473302] MSR0000020d: 0000000000000000
it seems right.
can you send out /proc/cpuinfo
YH
Quoted 1 line · Yinghai Lu
can you send out
/proc/cpuinfo
See below. I should also add that this kernel correctly sets up the mtrrs on an amd system.
--
processor : 0vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
stepping : 6
cpu MHz : 2400.000
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yesfpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips : 6386.99
clflush size : 64cache_alignment : 64
address sizes : 38 bits physical, 48 bits virtual
power management:
processor : 1vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
stepping : 6
cpu MHz : 2400.000
cache size : 6144 KB
physical id : 1
siblings : 4
core id : 0
cpu cores : 4
apicid : 4
initial apicid : 4
fpu : yesfpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips : 6386.12
clflush size : 64cache_alignment : 64
address sizes : 38 bits physical, 48 bits virtual
power management:
processor : 2vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
stepping : 6
cpu MHz : 2400.000
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yesfpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips : 6386.09
clflush size : 64cache_alignment : 64
address sizes : 38 bits physical, 48 bits virtual
power management:
processor : 3vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
stepping : 6
cpu MHz : 2400.000
cache size : 6144 KB
physical id : 1
siblings : 4
core id : 1
cpu cores : 4
apicid : 5
initial apicid : 5
fpu : yesfpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips : 6386.09
clflush size : 64cache_alignment : 64
address sizes : 38 bits physical, 48 bits virtual
power management:
processor : 4vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
stepping : 6
cpu MHz : 2400.000
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yesfpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips : 6386.09
clflush size : 64cache_alignment : 64
address sizes : 38 bits physical, 48 bits virtual
power management:
processor : 5vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
stepping : 6
cpu MHz : 2400.000
cache size : 6144 KB
physical id : 1
siblings : 4
core id : 2
cpu cores : 4
apicid : 6
initial apicid : 6
fpu : yesfpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips : 6386.10
clflush size : 64cache_alignment : 64
address sizes : 38 bits physical, 48 bits virtual
power management:
processor : 6vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
stepping : 6
cpu MHz : 2400.000
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fpu : yesfpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips : 6386.07
clflush size : 64cache_alignment : 64
address sizes : 38 bits physical, 48 bits virtual
power management:
processor : 7vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
stepping : 6
cpu MHz : 2400.000
cache size : 6144 KB
physical id : 1
siblings : 4
core id : 3
cpu cores : 4
apicid : 7
initial apicid : 7
fpu : yesfpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips : 6434.88
clflush size : 64cache_alignment : 64
address sizes : 38 bits physical, 48 bits virtual
power management:
Quoted 53 lines · Joshua Hoblitt
Quoted 1 line · Yinghai Lu
can you send out
/proc/cpuinfoSee below. I should also add that this kernel correctly sets up the mtrrs on an amd system.
--
processor : 0vendor_id: GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
stepping : 6
cpu MHz : 2400.000
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yesfpu_exception: yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lmconstant_tscarch_perfmonpebs btsrep_goodnopl pni monitords_cplvmx est tm2 ssse3 cx16 xtpr dcasse4_1lahf_lm
bogomips : 6386.99
clflush size : 64cache_alignment: 64
address sizes : 38 bits physical, 48 bits virtual
power management:processor : 1
vendor_id: GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Xeon(R) CPU X5482 @ 3.20GHz
stepping : 6
cpu MHz : 2400.000
cache size : 6144 KB
physical id : 1
siblings : 4
core id : 0
cpu cores : 4
apicid : 4
initial apicid : 4
fpu : yesfpu_exception: yes
cpuid level : 10
wp : yes
Quoted 8 lines
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lmconstant_tscarch_perfmonpebs btsrep_goodnopl pni monitords_cplvmx est tm2 ssse3 cx16 xtpr dcasse4_1lahf_lm
bogomips : 6386.12
clflush size : 64cache_alignment: 64
address sizes : 38 bits physical, 48 bits virtual
good, the root cause is your bios not set mask correctly...
it should set var mtrr like
[ 0.429971] MSR00000200: 00000000d0000000 [ 0.433305] MSR00000201: 0000000ff0000800
==> [ 0.433305] MSR00000201: 0000003ff0000800
[ 0.436638] MSR00000202: 00000000e0000000 [ 0.439971] MSR00000203: 0000000fe0000800
==> [ 0.439971] MSR00000203: 0000003fe0000800
[ 0.443304] MSR00000204: 0000000000000006 [ 0.446637] MSR00000205: 0000000c00000800
==> [ 0.446637] MSR00000205: 0000003c00000800
[ 0.449970] MSR00000206: 0000000400000006 [ 0.453303] MSR00000207: 0000000fe0000800
==>[ 0.453303] MSR00000207: 0000003fe0000800
[ 0.456636] MSR00000208: 0000000420000006 [ 0.459970] MSR00000209: 0000000ff0000800
==> [ 0.459970] MSR00000209: 0000003ff0000800
you may talk to your BIOS vendor or system vendor to request one new updated BIOS.
YH
Quoted 22 lines · Yinghai Lu
Quoted 2 lines · Joshua Hoblitt
On Thu, Aug 21, 2008 at 06:55:58PM -0700, Yinghai Lu wrote:
address sizes : 38 bits physical, 48 bits virtualgood, the root cause is your bios not set mask correctly...
it should set var mtrr like
[ 0.429971] MSR00000200: 00000000d0000000 [ 0.433305] MSR00000201: 0000000ff0000800==> [ 0.433305] MSR00000201:
0000003ff0000800[ 0.436638] MSR00000202: 00000000e0000000 [ 0.439971] MSR00000203: 0000000fe0000800==> [ 0.439971] MSR00000203:
0000003fe0000800[ 0.443304] MSR00000204: 0000000000000006 [ 0.446637] MSR00000205: 0000000c00000800==> [ 0.446637] MSR00000205:
0000003c00000800[ 0.449970] MSR00000206: 0000000400000006 [ 0.453303] MSR00000207: 0000000fe0000800
Quoted 9 lines
==>[ 0.453303] MSR00000207:
0000003fe0000800[ 0.456636] MSR00000208: 0000000420000006 [ 0.459970] MSR00000209: 0000000ff0000800==> [ 0.459970] MSR00000209:
0000003ff0000800you may talk to your BIOS vendor or system vendor to request one new updated BIOS.
or please try attached workaround patch. hope it works.
Ingo,
if it works, we need to push it for 2.6.27
YH
[PATCH] x86: workaroun mtrr mask setting
Some BIOS doesn't set mtrr mask correctly, workaround it be prefix 111
arch/x86/kernel/cpu/mtrr/generic.c +13 -2
@@ -379,6 +379,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, unsigned long *size, mtrr_type *type) { unsigned int mask_lo, mask_hi, base_lo, base_hi; +unsigned int tmp, hi;rdmsr (MTRRphysMask_MSR (reg), mask_lo, mask_hi);if ((mask_lo &0x800 ) ==0 ) {
@@ -392,8 +393,18 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,rdmsr (MTRRphysBase_MSR (reg), base_lo, base_hi);/* Work out the shifted address mask. */ - mask_lo = size_or_mask | mask_hi << (32 -PAGE_SHIFT ) - | mask_lo >>PAGE_SHIFT ; + tmp = mask_hi << (32 -PAGE_SHIFT ) | mask_lo >>PAGE_SHIFT ; + mask_lo = size_or_mask | tmp; +/* expend tmp with high bits to all 1s*/ + hi =fls (tmp); +if (hi >0 ) { + tmp |= ~((1 <<(hi -1 )) -1 ); + +if (tmp != mask_lo) { +WARN_ON ("You BIOS mask set is wrong, complain to vendor\n" ); + mask_lo = tmp; + } + }/* This works correctly if size is a power of two, i.e. a contiguous range. */
Quoted 2 lines · Yinghai Lu
you may talk to your BIOS vendor or system vendor to request one new updated BIOS.
Thank you for diagnosing the problem so quickly! I think those systems (we have 16 in that set) are Tyan S539Xs, where X is a 6 or 7. I'll have to double check the exact model.
http://www.tyan.com/product_board_detail.aspx?pid=562
I'll complain to Tyan about it during business hours tomorrow. Any idea as to why this issue didn't arise with earlier kernels? I've had Tyan technical support try to tell me to down rev. kernels in the past instead of escalating the issue. The more information I can give them the better.
-J
--
Quoted 4 lines · Yinghai Lu
or please try attached workaround patch. hope it works.
Ingo,
if it works, we need to push it for 2.6.27
i've tidied up your patch (see the commit below) and have queued it up in x86/urgent. It seems fairly safe and i guess we can push it to v2.6.27 if Joshua reports test success. Joshua, could you give it a go please?
Ingo
-------------->
Quoted 1 line
From
38cc1c3df77c1bb739a4766788eb9fa49f16ffdfMon Sep 17 00:00:00 2001
From: Yinghai Lu <[email protected]>
Date: Thu, 21 Aug 2008 20:24:24 -0700
Subject: [PATCH] x86: work around MTRR mask setting
Joshua Hoblitt reported that only 3 GB of his 16 GB of RAM is usable. Booting with mtrr_show showed us the BIOS-initialized MTRR settings - which are all wrong.
So the root cause is that the BIOS has not set the mask correctly:
Quoted 12 lines
[ 0.429971] MSR00000200: 00000000d0000000 [ 0.433305] MSR00000201: 0000000ff0000800should be ==> [ 0.433305] MSR00000201:
0000003ff0000800[ 0.436638] MSR00000202: 00000000e0000000 [ 0.439971] MSR00000203: 0000000fe0000800should be ==> [ 0.439971] MSR00000203:
0000003fe0000800[ 0.443304] MSR00000204: 0000000000000006 [ 0.446637] MSR00000205: 0000000c00000800should be ==> [ 0.446637] MSR00000205:
0000003c00000800
Quoted 7 lines
[ 0.449970] MSR00000206: 0000000400000006 [ 0.453303] MSR00000207: 0000000fe0000800should be ==> [ 0.453303] MSR00000207:
0000003fe0000800[ 0.456636] MSR00000208: 0000000420000006 [ 0.459970] MSR00000209: 0000000ff0000800should be ==> [ 0.459970] MSR00000209:
0000003ff0000800
So detect this borkage and add the prefix 111.
--- arch/x86/kernel/cpu/mtrr/generic.c | 15 +++++++++++++-- 1 files changed, 13 insertions(+), 2 deletions(-)
arch/x86/kernel/cpu/mtrr/generic.c +13 -2
@@ -379,6 +379,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, unsigned long *size, mtrr_type *type) { unsigned int mask_lo, mask_hi, base_lo, base_hi; +unsigned int tmp, hi;rdmsr (MTRRphysMask_MSR (reg), mask_lo, mask_hi);if ((mask_lo &0x800 ) ==0 ) {
@@ -392,8 +393,18 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,rdmsr (MTRRphysBase_MSR (reg), base_lo, base_hi);/* Work out the shifted address mask. */ - mask_lo = size_or_mask | mask_hi << (32 -PAGE_SHIFT ) - | mask_lo >>PAGE_SHIFT ; + tmp = mask_hi << (32 -PAGE_SHIFT ) | mask_lo >>PAGE_SHIFT ; + mask_lo = size_or_mask | tmp; +/* Expand tmp with high bits to all 1s*/ + hi =fls (tmp); +if (hi >0 ) { + tmp |= ~((1 <<(hi -1 )) -1 ); + +if (tmp != mask_lo) { +WARN_ON ("mtrr: your BIOS has set up an incorrect mask, fixing it up.\n" ); + mask_lo = tmp; + } + }/* This works correctly if size is a power of two, i.e. a contiguous range. */
Quoted 18 lines · Yinghai Lu
Quoted 17 lines · Ingo Molnar
Quoted 6 lines · Ingo Molnar
Quoted 1 line · Yinghai Lu
[PATCH]
x86_64: printout msrlooks rather useful - added it to tip/x86/debug.
fails to build with the attached config:
arch/x86/kernel/cpu/common_64.c: In function 'print_cpu_msr':arch/x86/kernel/cpu/common_64.c:456: error: implicit declaration of function 'rdmsrl_amd_safe'arch/x86/kernel/cpu/common_64.c: In function 'print_cpu_info':arch/x86/kernel/cpu/common_64.c:486: error: 'structcpuinfo_x86' has no member named 'cpu_index'
Quoted 6 lines
Quoted 2 lines
i realize that this wasnt sent for inclusion, but i think it would make sense to tidy it up and integrate it.
that was one tool to verify if BIOS does right thing about some special bits.
it seems it doesn't compile when xen etc is enable in config.
yeah - but would be nice to fix it, as it's a useful diagnostic patch. If people have similar problems in the future they can boot their distro kernels with show_mtrr=x to get a MTRR dump.
Ingo
Quoted 4 lines · Ingo Molnar
i've tidied up your patch (see the commit below) and have queued it up in x86/urgent. It seems fairly safe and i guess we can push it to v2.6.27 if Joshua reports test success. Joshua, could you give it a go please?
or just try the latest tip/master - please check whether you are getting the right amount of RAM out of box plus this warning message:
Quoted 1 line
WARN_ON("mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
Ingo
Quoted 24 lines · Ingo Molnar
Quoted 21 lines · Yinghai Lu
Quoted 19 lines · Ingo Molnar
Quoted 6 lines · Ingo Molnar
Quoted 1 line · Yinghai Lu
[PATCH]
x86_64: printout msrlooks rather useful - added it to tip/x86/debug.
fails to build with the attached config:
arch/x86/kernel/cpu/common_64.c: In function 'print_cpu_msr':arch/x86/kernel/cpu/common_64.c:456: error: implicit declaration of function 'rdmsrl_amd_safe'arch/x86/kernel/cpu/common_64.c: In function 'print_cpu_info':arch/x86/kernel/cpu/common_64.c:486: error: 'structcpuinfo_x86' has no member named 'cpu_index'i realize that this wasnt sent for inclusion, but i think it would make sense to tidy it up and integrate it.
Quoted 8 lines
Quoted 3 lines
that was one tool to verify if BIOS does right thing about some special bits.
it seems it doesn't compile when xen etc is enable in config.
yeah - but would be nice to fix it, as it's a useful diagnostic patch. If people have similar problems in the future they can boot their distro kernels with show_mtrr=x to get a MTRR dump.
will look at it.
YH
Quoted 13 lines · Ingo Molnar
Quoted 4 lines · Ingo Molnar
i've tidied up your patch (see the commit below) and have queued it up in x86/urgent. It seems fairly safe and i guess we can push it to v2.6.27 if Joshua reports test success. Joshua, could you give it a go please?
or just try the latest tip/master - please check whether you are getting the right amount of RAM out of box plus this warning message:
Quoted 1 line
WARN_ON("mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
according to his dmesg, it works.
may need to change it to WARN_ON only print one time
YH
Quoted 73 lines · Ingo Molnar
Quoted 4 lines · Yinghai Lu
or please try attached workaround patch. hope it works.
Ingo,
if it works, we need to push it for 2.6.27i've tidied up your patch (see the commit below) and have queued it up in x86/urgent. It seems fairly safe and i guess we can push it to v2.6.27 if Joshua reports test success. Joshua, could you give it a go please?
Ingo
-------------->
From38cc1c3df77c1bb739a4766788eb9fa49f16ffdfMon Sep 17 00:00:00 2001
From: Yinghai Lu <[email protected]>
Date: Thu, 21 Aug 2008 20:24:24 -0700
Subject: [PATCH] x86: work around MTRR mask settingJoshua Hoblitt reported that only 3 GB of his 16 GB of RAM is usable. Booting with
mtrr_showshowed us the BIOS-initialized MTRR settings - which are all wrong.So the root cause is that the BIOS has not set the mask correctly:
Quoted 12 lines
[ 0.429971] MSR00000200: 00000000d0000000 [ 0.433305] MSR00000201: 0000000ff0000800should be ==> [ 0.433305] MSR00000201:
0000003ff0000800[ 0.436638] MSR00000202: 00000000e0000000 [ 0.439971] MSR00000203: 0000000fe0000800should be ==> [ 0.439971] MSR00000203:
0000003fe0000800[ 0.443304] MSR00000204: 0000000000000006 [ 0.446637] MSR00000205: 0000000c00000800should be ==> [ 0.446637] MSR00000205:
0000003c00000800Quoted 7 lines
[ 0.449970] MSR00000206: 0000000400000006 [ 0.453303] MSR00000207: 0000000fe0000800should be ==> [ 0.453303] MSR00000207:
0000003fe0000800[ 0.456636] MSR00000208: 0000000420000006 [ 0.459970] MSR00000209: 0000000ff0000800should be ==> [ 0.459970] MSR00000209:
0000003ff0000800So detect this borkage and add the prefix 111.
Signed-off-by Yinghai Lu <[email protected]>Cc <[email protected]>Signed-off-by Ingo Molnar <[email protected]>--- arch/x86/kernel/cpu/mtrr/generic.c | 15 +++++++++++++-- 1 files changed, 13 insertions(+), 2 deletions(-)arch/x86/kernel/cpu/mtrr/generic.c +1
-1@@ -379,6 +379,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, unsigned long *size, mtrr_type *type) {unsigned int mask_lo, mask_hi, base_lo, base_hi; +unsigned int tmp, hi;rdmsr (MTRRphysMask_MSR (reg), mask_lo, mask_hi);if ((mask_lo &0x800 ) ==0 ) {@@ -392,8 +393,18 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,rdmsr (MTRRphysBase_MSR (reg), base_lo, base_hi);/* Work out the shifted address mask. */ - mask_lo = size_or_mask | mask_hi << (32 -PAGE_SHIFT )
arch/x86/kernel/cpu/mtrr/generic.c static void generic_get_mtrr(unsigned int reg, unsigned long *base, · line 404
Quoted 10 lines
arch/x86/kernel/cpu/mtrr/generic.c +9
-1- | mask_lo >> PAGE_SHIFT; + tmp = mask_hi << (32 -PAGE_SHIFT ) | mask_lo >>PAGE_SHIFT ; + mask_lo = size_or_mask | tmp; +/* Expand tmp with high bits to all 1s*/ + hi =fls (tmp); +if (hi >0 ) { + tmp |= ~((1 <<(hi -1 )) -1 ); + +if (tmp != mask_lo) { +WARN_ON ("mtrr: your BIOS has set up an incorrect mask, fixing it up.\n" );
can you change WARN_ON to WARN_ON_ONCE ?
YH
Quoted 4 lines · Yinghai Lu
Review
Quoted 2 lines
(quoted diff) +2
-0+ if (tmp != mask_lo) { + WARN_ON("mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");can you change
WARN_ONtoWARN_ON_ONCE?
the commit below does that. Note that the condition is WARN_ON(condition) or WARN(string) - WARN_ON(string) will just print a kernel stack unconditionally. Unfortunately there's no WARN_ONCE(). (Arjan?)
Ingo
---------->
Quoted 1 line
From
1c8aa33e17dc4aa68b329d262fff253648a98adbMon Sep 17 00:00:00 2001
From: Ingo Molnar <[email protected]>
Date: Fri, 22 Aug 2008 08:22:23 +0200
Subject: [PATCH] x86: work around MTRR mask setting, v2
improve the debug printout:
- make it actually display something
- print it only once
would be nice to have a WARN_ONCE() facility, to feed such things to kerneloops.org.
--- arch/x86/kernel/cpu/mtrr/generic.c | 7 ++++++- 1 files changed, 6 insertions(+), 1 deletions(-)
arch/x86/kernel/cpu/mtrr/generic.c +6 -1
@@ -401,7 +401,12 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, tmp |= ~((1 <<(hi -1 )) -1 );if (tmp != mask_lo) { -WARN_ON ("mtrr: your BIOS has set up an incorrect mask, fixing it up.\n" ); +static int once =1 ; + +if (once) { +printk (KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n" ); + once =0 ; + } mask_lo = tmp; } }
I've confirmed that the boards in these systems are Tyan Tempest i5400PW (S5397)s. We've discovered a workload that will deadlock the system under both 2.6.24.2 and -tip kernel with the mtrr masking patch. The only thing unusual about this workload is that one of the binaries in it constantly segvs... Is it possible that these deadlocks (no kernel oops on console) are caused by MSR setup wierdness or is it likely unrelated?
-J
--
Quoted 20 lines · Yinghai Lu
Quoted 13 lines · Ingo Molnar
Quoted 4 lines · Ingo Molnar
i've tidied up your patch (see the commit below) and have queued it up in x86/urgent. It seems fairly safe and i guess we can push it to v2.6.27 if Joshua reports test success. Joshua, could you give it a go please?
or just try the latest tip/master - please check whether you are getting the right amount of RAM out of box plus this warning message:
Quoted 1 line
WARN_ON("mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");according to his dmesg, it works.
may need to change it to
WARN_ONonly print one timeYH
Quoted 6 lines · Joshua Hoblitt
I've confirmed that the boards in these systems are Tyan Tempest i5400PW (S5397)s. We've discovered a workload that will deadlock the system under both 2.6.24.2 and -tip kernel with the mtrr masking patch. The only thing unusual about this workload is that one of the binaries in it constantly segvs... Is it possible that these deadlocks (no kernel oops on console) are caused by MSR setup wierdness or is it likely unrelated?
could be other problem.
cpu should be smarter enough to understand the missing bits in mask. at least amd cpu. remember that we didn't set mask bits to 40bits with opteron with LinuxBIOS, and everything still works well.
YH
Quoted 9 lines · Yinghai Lu
Quoted 7 lines · Joshua Hoblitt
I've confirmed that the boards in these systems are Tyan Tempest i5400PW (S5397)s. We've discovered a workload that will deadlock the system under both 2.6.24.2 and -tip kernel with the mtrr masking patch. The only thing unusual about this workload is that one of the binaries in it constantly segvs... Is it possible that these deadlocks (no kernel oops on console) are caused by MSR setup wierdness or is it likely unrelated?
Quoted 5 lines
could be other problem.
cpu should be smarter enough to understand the missing bits in mask. at least amd cpu. remember that we didn't set mask bits to 40bits with opteron with LinuxBIOS, and everything still works well.
yeah. Is the deadlock debuggable? (does nmi_watchdog=1 produce anything useful, or does the enabling of CONFIG_PROVE_LOCKING=y show anything weird in the syslog during light, non-deadlocking use of this workload?)
Ingo
Quoted 7 lines · On Fri, 22 Aug 2008 08:24:59 +0200 Ingo Molnar <[email protected]> wrote:
Quoted 4 lines · Yinghai Lu
Quoted 3 lines
(quoted diff) +2
-0+ if (tmp != mask_lo) { + WARN_ON("mtrr: your BIOS has set up anincorrect mask, fixing it up.\n");
Quoted 6 lines
Quoted 1 line
can you change
WARN_ONtoWARN_ON_ONCE?the commit below does that. Note that the condition is
WARN_ON(condition)or WARN(string) -WARN_ON(string)will just print a kernel stack unconditionally. Unfortunately there's noWARN_ONCE(). (Arjan?)
Andrew removed that from the patches as "unused" :-( oh well easy to add back ;-)
Signature · 3 lines
If you want to reach me at my work email, use [email protected] For development, discussion and tips for power savings, visit http://www.lesswatts.org
Quoted 12 lines · Arjan van de Ven
Quoted 9 lines · On Fri, 22 Aug 2008 08:24:59 +0200 Ingo Molnar <[email protected]> wrote:
Quoted 5 lines · Yinghai Lu
Quoted 3 lines
(quoted diff) +2
-0+ if (tmp != mask_lo) { + WARN_ON("mtrr: your BIOS has set up anincorrect mask, fixing it up.\n");
can you change
WARN_ONtoWARN_ON_ONCE?
Quoted 7 lines
Quoted 4 lines
the commit below does that. Note that the condition is
WARN_ON(condition)or WARN(string) -WARN_ON(string)will just print a kernel stack unconditionally. Unfortunately there's noWARN_ONCE(). (Arjan?)Andrew removed that from the patches as "unused" :-( oh well easy to add back ;-)
please send a patch, with at least one user :-)
Ingo
I repulled/rebuilding the tip tree this morning. I can confirm that the show_msr patch is working and mtrr masking patch is now only printing a single warning in the dmesg. The dmesg is attached.
As per usual, the kernel folks provide the best support of any software in history. Thanks guys!
-J
--
Quoted 8 lines · Ingo Molnar
Quoted 4 lines · Ingo Molnar
i've tidied up your patch (see the commit below) and have queued it up in x86/urgent. It seems fairly safe and i guess we can push it to v2.6.27 if Joshua reports test success. Joshua, could you give it a go please?
Quoted 6 lines
or just try the latest tip/master - please check whether you are getting the right amount of RAM out of box plus this warning message:
Quoted 1 line
WARN_ON("mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");Ingo
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.27-rc4-tip-00345-g8c8b7ed (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 SMP Mon Aug 25 10:36:23 HST 2008 [ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff00000 (usable) [ 0.000000] BIOS-e820: 00000000cff00000 - 00000000cff0a000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff0b000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable) [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up. [ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff00000 page 4k [ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000 [ 0.000000] last_map_addr: cff00000 end: cff00000 [ 0.000000] init_memory_mapping [ 0.000000] 0100000000 - 0430000000 page 2M [ 0.000000] kernel direct mapping tables up to 430000000 @ c000-1e000 [ 0.000000] last_map_addr: 430000000 end: 430000000 [ 0.000000] RAMDISK: 37e10000 - 37fef782 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7020, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT CFF0395D, 005C (r1 PTLTD XSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP CFF09D60, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3) [ 0.000000] ACPI: DSDT CFF0599D, 434F (r1 Intel SEABURG 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS CFF0AFC0, 0040 [ 0.000000] ACPI: _MAR CFF09E54, 0030 (r1 Intel OEMDMAR 6040000 LOHR 1) [ 0.000000] ACPI: APIC CFF09E84, 00C8 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG CFF09F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: BOOT CFF09F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SPCR CFF09FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) [ 0.000000] ACPI: SSDT CFF039B9, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000430000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000430000000 [ 0.000000] NODE_DATA [0000000000019000 - 0000000000023fff] [ 0.000000] bootmap [0000000000100000 - 0000000000185fff] pages 86 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0430000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00009bfef0] TEXT DATA BSS ==> [0000200000 - 00009bfef0] [ 0.000000] #3 [0037e10000 - 0037fef782] RAMDISK ==> [0037e10000 - 0037fef782] [ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #6 [000000c000 - 0000019000] PGTABLE ==> [000000c000 - 0000019000] [ 0.000000] found SMP MP-table at [ffff8800000f7050] 000f7050 [ 0.000000] [ffffe20000000000-ffffe200107fffff] PMD -> [ffff880028200000-ffff880037dfffff] on node 0 [ 0.000000] [ffffe20010800000-ffffe20010bfffff] PMD -> [ffff880038000000-ffff8800383fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00430000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff00 [ 0.000000] 0: 0x00100000 -> 0x00430000 [ 0.000000] On node 0 totalpages: 4193950 [ 0.000000] DMA zone: 1832 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 831296 pages, LIFO batch:31 [ 0.000000] Normal zone: 3290112 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec88000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000 [ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000 [ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000cff0a000 [ 0.000000] PM: Registered nosave memory: 00000000cff0a000 - 00000000cff0b000 [ 0.000000] PM: Registered nosave memory: 00000000cff0b000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 size:0x10 nr:256 align:0x1000 [ 0.000000] dyn_array irq_cfgx+0x0/0x8 size:0x30 nr:32 align:0x1000 [ 0.000000] dyn_array sparse_irqs+0x0/0x8 size:0x100 nr:32 align:0x1000 [ 0.000000] dyn_array total_size: 0x4000 [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 ==> [0x28034000 - 0x28035000] [ 0.000000] dyn_array irq_cfgx+0x0/0x8 ==> [0x28035000 - 0x28035600] [ 0.000000] dyn_array sparse_irqs+0x0/0x8 ==> [0x28036000 - 0x28038000] [ 0.000000] kstat_irqs ==> [0x28038000 - 0x28038400] [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] per cpu data for cpu0 on node0 at 0000000028039000 [ 0.000000] per cpu data for cpu1 on node0 at 0000000028045000 [ 0.000000] per cpu data for cpu2 on node0 at 0000000028051000 [ 0.000000] per cpu data for cpu3 on node0 at 000000002805d000 [ 0.000000] per cpu data for cpu4 on node0 at 0000000028069000 [ 0.000000] per cpu data for cpu5 on node0 at 0000000028075000 [ 0.000000] per cpu data for cpu6 on node0 at 0000000028081000 [ 0.000000] per cpu data for cpu7 on node0 at 000000002808d000 [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4123240 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] Initializing CPU#0 [ 0.000000] found new irq_desc for irq 0 [ 0.000000] found new irq_desc for irq 1 [ 0.000000] found new irq_desc for irq 2 [ 0.000000] found new irq_desc for irq 3 [ 0.000000] found new irq_desc for irq 4 [ 0.000000] found new irq_desc for irq 5 [ 0.000000] found new irq_desc for irq 6 [ 0.000000] found new irq_desc for irq 7 [ 0.000000] found new irq_desc for irq 8 [ 0.000000] found new irq_desc for irq 9 [ 0.000000] found new irq_desc for irq 10 [ 0.000000] found new irq_desc for irq 11 [ 0.000000] found new irq_desc for irq 12 [ 0.000000] found new irq_desc for irq 13 [ 0.000000] found new irq_desc for irq 14 [ 0.000000] found new irq_desc for irq 15 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 3192.010 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] console [ttyS0] enabled [ 0.003333] Checking aperture... [ 0.003333] No AGP bridge found [ 0.003333] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.003333] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.003333] Memory: 16436776k/17563648k available (3831k kernel code, 339024k reserved, 2175k data, 676k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.003341] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.02 BogoMIPS (lpj=10640033) [ 0.010017] Security Framework initialized [ 0.016879] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.027256] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.034238] Mount-cache hash table entries: 256 [ 0.036819] Initializing cgroup subsys ns [ 0.040003] Initializing cgroup subsys cpuacct [ 0.043333] Initializing cgroup subsys memory [ 0.046668] Initializing cgroup subsys devices [ 0.050006] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.055184] CPU: L2 cache: 6144K [ 0.056665] CPU 0/0 -> Node 0 [ 0.059998] CPU: Physical Processor ID: 0 [ 0.063330] CPU: Processor Core ID: 0 [ 0.066667] CPU0: Thermal monitoring enabled (TM2) [ 0.069997] using mwait in idle threads. [ 0.073345] ACPI: Core revision 20080609 [ 0.083380] Setting APIC routing to flat [ 0.090076] 0 add_pin_to_irq: irq 1 --> apic 0 pin 1 [ 0.090081] 0 add_pin_to_irq: irq 0 --> apic 0 pin 2 [ 0.090083] 0 add_pin_to_irq: irq 3 --> apic 0 pin 3 [ 0.090086] 0 add_pin_to_irq: irq 4 --> apic 0 pin 4 [ 0.090089] 0 add_pin_to_irq: irq 5 --> apic 0 pin 5 [ 0.090091] 0 add_pin_to_irq: irq 6 --> apic 0 pin 6 [ 0.090093] 0 add_pin_to_irq: irq 7 --> apic 0 pin 7 [ 0.090096] 0 add_pin_to_irq: irq 8 --> apic 0 pin 8 [ 0.090098] 0 add_pin_to_irq: irq 9 --> apic 0 pin 9 [ 0.090101] 0 add_pin_to_irq: irq 10 --> apic 0 pin 10 [ 0.090104] 0 add_pin_to_irq: irq 11 --> apic 0 pin 11 [ 0.090106] 0 add_pin_to_irq: irq 12 --> apic 0 pin 12 [ 0.090109] 0 add_pin_to_irq: irq 13 --> apic 0 pin 13 [ 0.090111] 0 add_pin_to_irq: irq 14 --> apic 0 pin 14 [ 0.090114] 0 add_pin_to_irq: irq 15 --> apic 0 pin 15 [ 0.090247] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.129455] CPU0: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.136658] MSR00000000: 00000000cff69380 [ 0.139991] MSR00000001: 0000000000000000 [ 0.143327] MSR00000006: 0000000000000040 [ 0.146661] MSR00000010: 00000041ff91fb10 [ 0.149993] MSR00000017: 0018000088e40822 [ 0.153325] MSR0000001b: 00000000fee00900 [ 0.156659] MSR00000021: 0000000000000001 [ 0.159993] MSR0000002a: 00000000c208149e [ 0.163326] MSR00000032: 0000000000000000 [ 0.166656] MSR00000033: 0000000000000000 [ 0.169991] MSR00000039: 0000000000000000 [ 0.173322] MSR0000003a: 000000000000000d [ 0.176657] MSR0000003f: 0000000000000000 [ 0.179989] MSR00000040: ffffffff805af2f3 [ 0.183322] MSR00000041: ffffffff8020c348 [ 0.186655] MSR00000042: ffffffff802380fc [ 0.189988] MSR00000043: ffffffff8020c348 [ 0.193332] MSR00000060: ffffffff805af2cc [ 0.196654] MSR00000061: ffffffff802380eb [ 0.199987] MSR00000062: ffffffff805af2c1 [ 0.203320] MSR00000063: ffffffff802380eb [ 0.206668] MSR0000008b: 0000060600000000 [ 0.209992] MSR0000009b: 0000000000000000 [ 0.213321] MSR000000a0: 00000000cff80000 [ 0.216653] MSR000000a1: 00000000fff80800 [ 0.219989] MSR000000a8: 000000000000061a [ 0.223319] MSR000000a9: 000000000000061a [ 0.226652] MSR000000aa: 000000000000061a [ 0.229985] MSR000000ab: 000000000000061a [ 0.233318] MSR000000ac: 000000000000061a [ 0.236652] MSR000000ad: 000000000000061a [ 0.239992] MSR000000c1: 0000000000000000 [ 0.243318] MSR000000c2: 0000000000000000 [ 0.246653] MSR000000c7: 130000004c000000 [ 0.249986] MSR000000cd: 0000000000000806 [ 0.253317] MSR000000ce: 001a08227f7f071a [ 0.256650] MSR000000cf: 0000000000000000 [ 0.259990] MSR000000e0: 00000000018bc0f0 [ 0.263316] MSR000000e1: 00000000f0f00000 [ 0.266650] MSR000000e2: 0000000002262201 [ 0.269983] MSR000000e3: 0000000000000000 [ 0.273316] MSR000000e4: 0000000000000000 [ 0.276649] MSR000000e5: 00000000d00208c8 [ 0.279982] MSR000000e7: 000000421f188350 [ 0.283315] MSR000000e8: 000000421fe966d0 [ 0.286650] MSR000000ee: 04000000877d4b01 [ 0.289987] MSR000000fe: 0000000000000d07 [ 0.293323] MSR00000116: 0000000000003fc0 [ 0.296648] MSR00000118: 00000000000bfffd [ 0.299982] MSR0000011b: 0000000000000000 [ 0.303314] MSR0000011c: 00000000e000000c [ 0.306647] MSR0000011e: 00000000be702111 [ 0.309998] MSR0000014e: 000000006fe76e2f [ 0.313313] MSR0000014f: 00000000f7bef7ff [ 0.316647] MSR00000151: 00000000ad123a00 [ 0.319984] MSR0000015e: 0000000000000006 [ 0.323313] MSR0000015f: 00000000001c0822 [ 0.326653] MSR00000174: 0000000000000010 [ 0.329979] MSR00000175: 0000000000000000 [ 0.333312] MSR00000176: ffffffff80228960 [ 0.336646] MSR00000179: 0000000000000806 [ 0.339978] MSR0000017a: 0000000000000000 [ 0.343315] MSR00000186: 0000000000000000 [ 0.346644] MSR00000187: 0000000000000000 [ 0.349982] MSR00000193: 0000000000000000 [ 0.353311] MSR00000194: 0000000000000522 [ 0.356645] MSR00000198: 0822082206000822 [ 0.359977] MSR00000199: 0000000000000822 [ 0.363310] MSR0000019a: 0000000000000002 [ 0.366643] MSR0000019b: 0000000000000003 [ 0.369976] MSR0000019c: 00000000882a0000 [ 0.373309] MSR0000019d: 000000000000061a [ 0.376642] MSR0000019e: 0000000006010000 [ 0.379976] MSR0000019f: 0000000000000000 [ 0.383309] MSR000001a0: 00000060669d2489 [ 0.386642] MSR000001a1: 0000000000000000 [ 0.389975] MSR000001a2: 0000000000001000 [ 0.393311] MSR000001aa: 00000000fe7f042f [ 0.396649] MSR000001bf: 0000000000000404 [ 0.399978] MSR000001c9: 0000000000000002 [ 0.403311] MSR000001d3: 0000000000008000 [ 0.406642] MSR000001d9: 0000000000000001 [ 0.409974] MSR000001db: ffffffff805af2f3 [ 0.413307] MSR000001dc: ffffffff805af2c1 [ 0.416640] MSR000001dd: ffffffff802380ca [ 0.419973] MSR000001de: ffffffff802380e6 [ 0.423306] MSR000001e0: 0000000000000ff0 [ 0.426648] MSR000001f8: 0000000000000001 [ 0.429972] MSR000001f9: 0000000000000001 [ 0.433305] MSR000001fa: 0000000000008c89 [ 0.436640] MSR00000200: 00000000d0000000 [ 0.439972] MSR00000201: 0000000ff0000800 [ 0.443305] MSR00000202: 00000000e0000000 [ 0.446638] MSR00000203: 0000000fe0000800 [ 0.449971] MSR00000204: 0000000000000006 [ 0.453304] MSR00000205: 0000000c00000800 [ 0.456637] MSR00000206: 0000000400000006 [ 0.459970] MSR00000207: 0000000fe0000800 [ 0.463303] MSR00000208: 0000000420000006 [ 0.466637] MSR00000209: 0000000ff0000800 [ 0.469970] MSR0000020a: 0000000000000000 [ 0.473303] MSR0000020b: 0000000000000000 [ 0.476636] MSR0000020c: 0000000000000000 [ 0.479969] MSR0000020d: 0000000000000000 [ 0.483328] MSR00000250: 0606060606060606 [ 0.486638] MSR00000258: 0606060606060606 [ 0.489968] MSR00000259: 0000000000000000 [ 0.493307] MSR00000268: 0505050505050505 [ 0.496635] MSR00000269: 0505050505050505 [ 0.499968] MSR0000026a: 0000000000000000 [ 0.503301] MSR0000026b: 0000000000000000 [ 0.506634] MSR0000026c: 0505050505050505 [ 0.509968] MSR0000026d: 0505050505050505 [ 0.513301] MSR0000026e: 0505050505050505 [ 0.516634] MSR0000026f: 0505050505050505 [ 0.519970] MSR00000277: 0007010600070106 [ 0.523353] MSR000002ff: 0000000000000c00 [ 0.526638] MSR00000309: 0000000000000000 [ 0.529968] MSR0000030a: 0000000000000000 [ 0.533301] MSR0000030b: 0000000000000000 [ 0.536656] MSR00000345: 00000000000010c2 [ 0.539995] MSR0000038d: 0000000000000000 [ 0.543301] MSR0000038e: 0000000000000000 [ 0.546634] MSR0000038f: ffffffffffffffff [ 0.549968] MSR00000390: ffffffffffffffff [ 0.553338] MSR000003f1: 0000000000000000 [ 0.556640] MSR00000400: 00000000c208149e [ 0.559968] MSR00000401: 1000000000000000 [ 0.563301] MSR00000402: 0000000000000000 [ 0.566635] MSR00000404: 0000000000000001 [ 0.569968] MSR00000405: 0000000000000000 [ 0.573301] MSR00000406: 000002a9000002a9 [ 0.576635] MSR00000408: 0000000000000001 [ 0.579968] MSR00000409: 0000000000000000 [ 0.583301] MSR0000040a: 000002a9000002a9 [ 0.586635] MSR0000040c: 0000000000000001 [ 0.589968] MSR0000040d: 0020000000000000 [ 0.593301] MSR0000040e: 00000080608ad188 [ 0.596635] MSR00000410: 0000000000000008 [ 0.599968] MSR00000411: 0000000000000011 [ 0.603302] MSR00000414: 0000000000000001 [ 0.606634] MSR00000415: 1000001004000e0f [ 0.610018] MSRc0000080: 0000000000000d01 [ 0.613301] MSRc0000081: 0023001000000000 [ 0.616634] MSRc0000082: ffffffff8020bce0 [ 0.619968] MSRc0000083: ffffffff80228b70 [ 0.623301] MSRc0000084: 0000000000003700 [ 0.626681] MSRc0000100: 0000000000000000 [ 0.629968] MSRc0000101: ffffffff807e6c00 [ 0.633301] MSRc0000102: 0000000000000000 [ 0.643300] Booting processor 1/4 ip 6000 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6386.64 BogoMIPS (lpj=10639430) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 1/4 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 1 [ 0.003333] CPU: Processor Core ID: 0 [ 0.003333] CPU1: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.738103] CPU1: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.744732] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.746689] Booting processor 2/1 ip 6000 [ 0.003333] Initializing CPU#2 [ 0.003333] Calibrating delay using timer specific routine.. 6386.61 BogoMIPS (lpj=10639385) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 2/1 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] CPU2: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.844800] CPU2: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.851400] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.853400] Booting processor 3/5 ip 6000 [ 0.003333] Initializing CPU#3 [ 0.003333] Calibrating delay using timer specific routine.. 6386.62 BogoMIPS (lpj=10639401) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 3/5 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 1 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] CPU3: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.951441] CPU3: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.958064] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.960026] Booting processor 4/2 ip 6000 [ 0.003333] Initializing CPU#4 [ 0.003333] Calibrating delay using timer specific routine.. 6386.60 BogoMIPS (lpj=10639363) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 4/2 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 2 [ 0.003333] CPU4: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 1.058128] CPU4: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 1.064733] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 1.066687] Booting processor 5/6 ip 6000 [ 0.003333] Initializing CPU#5 [ 0.003333] Calibrating delay using timer specific routine.. 6386.60 BogoMIPS (lpj=10639368) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 5/6 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 1 [ 0.003333] CPU: Processor Core ID: 2 [ 0.003333] CPU5: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 1.164844] CPU5: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 1.171401] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 1.173351] Booting processor 6/3 ip 6000 [ 0.003333] Initializing CPU#6 [ 0.003333] Calibrating delay using timer specific routine.. 6386.61 BogoMIPS (lpj=10639379) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 6/3 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 3 [ 0.003333] CPU6: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 1.271472] CPU6: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 1.279979] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 1.286686] Booting processor 7/7 ip 6000 [ 0.003333] Initializing CPU#7 [ 0.003333] Calibrating delay using timer specific routine.. 6386.62 BogoMIPS (lpj=10639406) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 7/7 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 1 [ 0.003333] CPU: Processor Core ID: 3 [ 0.003333] CPU7: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 1.384776] CPU7: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 1.391399] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 1.393308] Brought up 8 CPUs [ 1.396635] Total of 8 processors activated (51089.35 BogoMIPS). [ 1.400602] net_namespace: 864 bytes [ 1.403457] xor: automatically using best checksumming function: generic_sse [ 1.423301] generic_sse: 11871.600 MB/sec [ 1.426634] xor: using function: generic_sse (11871.600 MB/sec) [ 1.429997] NET: Registered protocol family 16 [ 1.433531] No dock devices found. [ 1.436849] ACPI: bus type pci registered [ 1.440110] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8 [ 1.443302] PCI: MCFG area at e0000000 reserved in E820 [ 1.446821] PCI: Using MMCONFIG at e0000000 - e08fffff [ 1.449968] PCI: Using configuration type 1 for base access [ 1.458449] ACPI: EC: Look up EC in DSDT [ 1.460268] ACPI: Interpreter enabled [ 1.463302] ACPI: (supports S0 S3 S4 S5) [ 1.468074] ACPI: Using IOAPIC for interrupt routing [ 1.475012] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.476744] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.479969] pci 0000:00:00.0: PME# disabled [ 1.483323] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.486635] pci 0000:00:01.0: PME# disabled [ 1.489991] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 1.493302] pci 0000:00:05.0: PME# disabled [ 1.496658] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.499969] pci 0000:00:09.0: PME# disabled [ 1.503525] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.506636] pci 0000:00:1b.0: PME# disabled [ 1.510005] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.513303] pci 0000:00:1c.0: PME# disabled [ 1.516837] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.519970] pci 0000:00:1d.7: PME# disabled [ 1.523376] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 1.523526] pci 0000:01:00.0: supports D1 [ 1.523550] PCI: bridge 0000:00:01.0 32bit mmio: [dc100000, dc1fffff] [ 1.526695] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.529969] pci 0000:03:00.0: PME# disabled [ 1.533335] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold [ 1.536636] pci 0000:03:00.3: PME# disabled [ 1.539993] PCI: bridge 0000:00:09.0 io port: [2000, 2fff] [ 1.543302] PCI: bridge 0000:00:09.0 32bit mmio: [dc200000, dc3fffff] [ 1.546674] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.549969] pci 0000:04:00.0: PME# disabled [ 1.553333] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold [ 1.556636] pci 0000:04:02.0: PME# disabled [ 1.559987] PCI: bridge 0000:03:00.0 io port: [2000, 2fff] [ 1.563302] PCI: bridge 0000:03:00.0 32bit mmio: [dc200000, dc2fffff] [ 1.566736] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.569970] pci 0000:06:00.0: PME# disabled [ 1.573370] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold [ 1.576636] pci 0000:06:00.1: PME# disabled [ 1.579995] PCI: bridge 0000:04:02.0 io port: [2000, 2fff] [ 1.583302] PCI: bridge 0000:04:02.0 32bit mmio: [dc200000, dc2fffff] [ 1.586779] pci 0000:09:05.0: supports D1 [ 1.586780] pci 0000:09:05.0: supports D2 [ 1.586839] pci 0000:09:06.0: supports D2 [ 1.586840] pci 0000:09:06.0: PME# supported from D2 D3hot D3cold [ 1.589970] pci 0000:09:06.0: PME# disabled [ 1.593327] pci 0000:00:1e.0: transparent bridge [ 1.596644] PCI: bridge 0000:00:1e.0 io port: [3000, 3fff] [ 1.599969] PCI: bridge 0000:00:1e.0 32bit mmio: [dc000000, dc0fffff] [ 1.603304] PCI: bridge 0000:00:1e.0 64bit mmio pref: [d8000000, dbffffff] [ 1.606649] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.607085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.607173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 1.607254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 1.609973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0._PRT] [ 1.610147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD0._PRT] [ 1.610229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD2._PRT] [ 1.610311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT] [ 1.610438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.610530] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 1.619795] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15) [ 1.623888] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.631510] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.639519] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.643883] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) [ 1.651512] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15) [ 1.659053] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15) [ 1.663358] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9 [ 1.671379] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1.673363] pnp: PnP ACPI init [ 1.676638] ACPI: bus type pnp registered [ 1.684675] pnp: PnP ACPI: found 11 devices [ 1.686635] ACPI: ACPI bus type pnp unregistered [ 1.690226] SCSI subsystem initialized [ 1.693560] libata version 3.00 loaded. [ 1.693878] usbcore: registered new interface driver usbfs [ 1.696702] usbcore: registered new interface driver hub [ 1.700059] usbcore: registered new device driver usb [ 1.703709] PCI: Using ACPI for IRQ routing [ 1.723323] PCI-GART: No AMD northbridge found. [ 1.726732] hpet clockevent registered [ 1.726735] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.733301] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.739991] ACPI: RTC can wake from S4 [ 1.752137] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 1.758702] system 00:01: ioport range 0x800-0x80f has been reserved [ 1.765260] system 00:01: ioport range 0x1000-0x107f has been reserved [ 1.771994] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 1.778731] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 1.785460] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 1.793294] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 1.801126] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.808961] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.816288] system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved [ 1.823621] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved [ 1.830953] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved [ 1.839316] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.845445] pci 0000:00:01.0: IO window: disabled [ 1.850520] pci 0000:00:01.0: MEM window: 0xdc100000-0xdc1fffff [ 1.856816] pci 0000:00:01.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff [ 1.864732] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02 [ 1.870855] pci 0000:00:05.0: IO window: disabled [ 1.875931] pci 0000:00:05.0: MEM window: disabled [ 1.881096] pci 0000:00:05.0: PREFETCH window: disabled [ 1.886696] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 [ 1.892815] pci 0000:04:00.0: IO window: disabled [ 1.897892] pci 0000:04:00.0: MEM window: disabled [ 1.903058] pci 0000:04:00.0: PREFETCH window: disabled [ 1.908667] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06 [ 1.914787] pci 0000:04:02.0: IO window: 0x2000-0x2fff [ 1.920296] pci 0000:04:02.0: MEM window: 0xdc200000-0xdc2fffff [ 1.926590] pci 0000:04:02.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.934508] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 1.941128] pci 0000:03:00.0: IO window: 0x2000-0x2fff [ 1.946634] pci 0000:03:00.0: MEM window: 0xdc200000-0xdc2fffff [ 1.952928] pci 0000:03:00.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.960845] pci 0000:03:00.3: PCI bridge, secondary bus 0000:07 [ 1.966966] pci 0000:03:00.3: IO window: disabled [ 1.972055] pci 0000:03:00.3: MEM window: disabled [ 1.977218] pci 0000:03:00.3: PREFETCH window: disabled [ 1.982814] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 1.988938] pci 0000:00:09.0: IO window: 0x2000-0x2fff [ 1.994447] pci 0000:00:09.0: MEM window: 0xdc200000-0xdc3fffff [ 2.000745] pci 0000:00:09.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 2.008670] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 2.014789] pci 0000:00:1c.0: IO window: disabled [ 2.019866] pci 0000:00:1c.0: MEM window: disabled [ 2.025029] pci 0000:00:1c.0: PREFETCH window: disabled [ 2.030622] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 2.036743] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 2.042263] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff [ 2.048555] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff [ 2.056478] found new irq_cfg for irq 16 [ 2.056479] 0 add_pin_to_irq: irq 16 --> apic 0 pin 16 [ 2.056482] found new irq_desc for irq 16 [ 2.056484] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.063384] pci 0000:00:01.0: setting latency timer to 64 [ 2.063387] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.070283] pci 0000:00:05.0: setting latency timer to 64 [ 2.070286] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.077180] pci 0000:00:09.0: setting latency timer to 64 [ 2.077185] vendor=8086 device=4029 [ 2.080865] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.087764] pci 0000:03:00.0: setting latency timer to 64 [ 2.087768] vendor=8086 device=3500 [ 2.091456] vendor=8086 device=4029 [ 2.095138] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.102047] pci 0000:04:00.0: setting latency timer to 64 [ 2.102051] vendor=8086 device=3500 [ 2.105749] vendor=8086 device=4029 [ 2.109430] found new irq_cfg for irq 18 [ 2.109431] 0 add_pin_to_irq: irq 18 --> apic 0 pin 18 [ 2.109434] found new irq_desc for irq 18 [ 2.109436] pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.116340] pci 0000:04:02.0: setting latency timer to 64 [ 2.116345] pci 0000:03:00.3: setting latency timer to 64 [ 2.116349] found new irq_cfg for irq 21 [ 2.116350] 0 add_pin_to_irq: irq 21 --> apic 0 pin 21 [ 2.116352] found new irq_desc for irq 21 [ 2.116353] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.123255] pci 0000:00:1c.0: setting latency timer to 64 [ 2.123259] pci 0000:00:1e.0: setting latency timer to 64 [ 2.123261] bus: 00 index 0 io port: [0, ffff] [ 2.127903] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 2.133331] bus: 01 index 0 mmio: [0, 0] [ 2.137454] bus: 01 index 1 mmio: [dc100000, dc1fffff] [ 2.142784] bus: 01 index 2 mmio: [d1000000, d10fffff] [ 2.148123] bus: 01 index 3 mmio: [0, 0] [ 2.152256] bus: 02 index 0 mmio: [0, 0] [ 2.156372] bus: 02 index 1 mmio: [0, 0] [ 2.160487] bus: 02 index 2 mmio: [0, 0] [ 2.164604] bus: 02 index 3 mmio: [0, 0] [ 2.168727] bus: 03 index 0 io port: [2000, 2fff] [ 2.173628] bus: 03 index 1 mmio: [dc200000, dc3fffff] [ 2.178968] bus: 03 index 2 mmio: [d1100000, d11fffff] [ 2.184307] bus: 03 index 3 mmio: [0, 0] [ 2.188429] bus: 04 index 0 io port: [2000, 2fff] [ 2.193329] bus: 04 index 1 mmio: [dc200000, dc2fffff] [ 2.199107] bus: 04 index 2 mmio: [d1100000, d11fffff] [ 2.204438] bus: 04 index 3 mmio: [0, 0] [ 2.208552] bus: 05 index 0 mmio: [0, 0] [ 2.216825] bus: 05 index 1 mmio: [0, 0] [ 2.220945] bus: 05 index 2 mmio: [0, 0] [ 2.225060] bus: 05 index 3 mmio: [0, 0] [ 2.229180] bus: 06 index 0 io port: [2000, 2fff] [ 2.234078] bus: 06 index 1 mmio: [dc200000, dc2fffff] [ 2.239404] bus: 06 index 2 mmio: [d1100000, d11fffff] [ 2.244739] bus: 06 index 3 mmio: [0, 0] [ 2.248859] bus: 07 index 0 mmio: [0, 0] [ 2.252977] bus: 07 index 1 mmio: [0, 0] [ 2.257092] bus: 07 index 2 mmio: [0, 0] [ 2.261210] bus: 07 index 3 mmio: [0, 0] [ 2.265335] bus: 08 index 0 mmio: [0, 0] [ 2.269451] bus: 08 index 1 mmio: [0, 0] [ 2.273570] bus: 08 index 2 mmio: [0, 0] [ 2.277688] bus: 08 index 3 mmio: [0, 0] [ 2.281803] bus: 09 index 0 io port: [3000, 3fff] [ 2.286702] bus: 09 index 1 mmio: [dc000000, dc0fffff] [ 2.292040] bus: 09 index 2 mmio: [d8000000, dbffffff] [ 2.297368] bus: 09 index 3 io port: [0, ffff] [ 2.302015] bus: 09 index 4 mmio: [0, ffffffffffffffff] [ 2.307441] NET: Registered protocol family 2 [ 2.342447] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 2.351747] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.362318] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.369559] TCP: Hash tables configured (established 524288 bind 65536) [ 2.376372] TCP reno registered [ 2.388889] NET: Registered protocol family 1 [ 2.393533] checking if image is initramfs... it is [ 2.447462] Freeing initrd memory: 1917k freed [ 2.452418] pci 0000:09:05.0: Boot video device [ 2.452642] input: Power Button (FF) as /class/input/input0 [ 2.458415] ACPI: Power Button (FF) [PWRF] [ 2.462809] input: Power Button (CM) as /class/input/input1 [ 2.468578] ACPI: Power Button (CM) [PWRB] [ 2.473058] found new irq_cfg for irq 20 [ 2.473059] 0 add_pin_to_irq: irq 20 --> apic 0 pin 20 [ 2.473065] found new irq_desc for irq 20 [ 2.473069] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.474634] Switched to high resolution mode on CPU 2 [ 2.474651] Switched to high resolution mode on CPU 7 [ 2.474734] Switched to high resolution mode on CPU 5 [ 2.474746] Switched to high resolution mode on CPU 3 [ 2.475210] Switched to high resolution mode on CPU 1 [ 2.475274] Switched to high resolution mode on CPU 4 [ 2.475559] Switched to high resolution mode on CPU 6 [ 2.480410] Switched to high resolution mode on CPU 0 [ 2.480417] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.480420] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.485941] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.497588] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.502323] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.502334] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc608000 [ 2.520008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.527959] usb usb1: configuration #1 chosen from 1 choice [ 2.533803] hub 1-0:1.0: USB hub found [ 2.537753] hub 1-0:1.0: 8 ports detected [ 2.643637] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.643697] USB Universal Host Controller Interface driver v3.0 [ 2.649833] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.657167] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.657169] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.662661] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.670423] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 [ 2.676470] usb usb2: configuration #1 chosen from 1 choice [ 2.682306] hub 2-0:1.0: USB hub found [ 2.686256] hub 2-0:1.0: 2 ports detected [ 2.793526] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.800868] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.800870] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.806365] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.814138] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 2.820190] usb usb3: configuration #1 chosen from 1 choice [ 2.826029] hub 3-0:1.0: USB hub found [ 2.829983] hub 3-0:1.0: 2 ports detected [ 2.936857] found new irq_cfg for irq 22 [ 2.936858] 0 add_pin_to_irq: irq 22 --> apic 0 pin 22 [ 2.936860] found new irq_desc for irq 22 [ 2.936862] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.944205] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.944207] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.949699] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.957472] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 [ 2.963516] usb usb4: configuration #1 chosen from 1 choice [ 2.969356] hub 4-0:1.0: USB hub found [ 2.973310] hub 4-0:1.0: 2 ports detected [ 3.080191] found new irq_cfg for irq 23 [ 3.080192] 0 add_pin_to_irq: irq 23 --> apic 0 pin 23 [ 3.080195] found new irq_desc for irq 23 [ 3.080197] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.087542] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.087544] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.093035] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.100820] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 [ 3.106869] usb usb5: configuration #1 chosen from 1 choice [ 3.112703] hub 5-0:1.0: USB hub found [ 3.116656] hub 5-0:1.0: 2 ports detected [ 3.223686] Simple Boot Flag at 0x40 set to 0x80 [ 3.232748] audit: initializing netlink socket (disabled) [ 3.238371] type=2000 audit(1219700065.236:1): initialized [ 3.249049] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.258941] VFS: Disk quotas dquot_6.5.1 [ 3.263163] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.271065] Installing knfsd (copyright (C) 1996 [email protected]). [ 3.277919] msgmni has been set to 32106 [ 3.282179] async_tx: api initialized (async) [ 3.286738] io scheduler noop registered [ 3.290862] io scheduler anticipatory registered [ 3.295673] io scheduler deadline registered [ 3.300297] io scheduler cfq registered (default) [ 3.305352] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 3.305374] pcieport-driver 0000:00:01.0: found MSI capability [ 3.311410] found new irq_cfg for irq 33024 [ 3.311415] found new irq_desc for irq 33024 [ 3.311423] pci_express 0000:00:01.0:pcie00: allocate port service [ 3.311505] pci_express 0000:00:01.0:pcie01: allocate port service [ 3.311585] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 3.311606] pcieport-driver 0000:00:05.0: found MSI capability [ 3.317646] found new irq_cfg for irq 164096 [ 3.317648] found new irq_desc for irq 164096 [ 3.317655] pci_express 0000:00:05.0:pcie00: allocate port service [ 3.317727] pci_express 0000:00:05.0:pcie01: allocate port service [ 3.317806] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 3.317828] pcieport-driver 0000:00:09.0: found MSI capability [ 3.323867] found new irq_cfg for irq 295168 [ 3.323868] found new irq_desc for irq 295168 [ 3.323875] pci_express 0000:00:09.0:pcie00: allocate port service [ 3.323945] pci_express 0000:00:09.0:pcie01: allocate port service [ 3.324032] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 3.324057] pcieport-driver 0000:00:1c.0: found MSI capability [ 3.330104] found new irq_cfg for irq 917760 [ 3.330105] found new irq_desc for irq 917760 [ 3.330115] pci_express 0000:00:1c.0:pcie00: allocate port service [ 3.330188] pci_express 0000:00:1c.0:pcie02: allocate port service [ 3.330236] pci_express 0000:00:1c.0:pcie03: allocate port service [ 3.330335] pcieport-driver 0000:03:00.0: setting latency timer to 64 [ 3.330361] pci_express 0000:03:00.0:pcie11: allocate port service [ 3.330458] pcieport-driver 0000:04:00.0: setting latency timer to 64 [ 3.330480] pcieport-driver 0000:04:00.0: found MSI capability [ 3.336530] found new irq_cfg for irq 4194560 [ 3.336532] found new irq_desc for irq 4194560 [ 3.336543] pci_express 0000:04:00.0:pcie21: allocate port service [ 3.336651] pcieport-driver 0000:04:02.0: setting latency timer to 64 [ 3.336675] pcieport-driver 0000:04:02.0: found MSI capability [ 3.342722] found new irq_cfg for irq 4260096 [ 3.342724] found new irq_desc for irq 4260096 [ 3.342735] pci_express 0000:04:02.0:pcie21: allocate port service [ 3.343580] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support [ 3.344172] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support [ 3.344758] aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support [ 3.345543] ACPI: SSDT CFF04DBE, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228) [ 3.353334] processor ACPI0007:00: registered as cooling_device0 [ 3.360253] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.367102] ACPI: SSDT CFF04F9B, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228) [ 3.266881] processor ACPI0007:01: registered as cooling_device1 [ 3.381854] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.388729] ACPI: SSDT CFF05109, 016E (r1 PmRef Cpu2Ist 3000 INTL 20050228) [ 3.397234] processor ACPI0007:02: registered as cooling_device2 [ 3.403440] ACPI: Processor [CPU2] (supports 8 throttling states) [ 3.410261] ACPI: SSDT CFF05277, 016E (r1 PmRef Cpu3Ist 3000 INTL 20050228) [ 3.418748] processor ACPI0007:03: registered as cooling_device3 [ 3.424960] ACPI: Processor [CPU3] (supports 8 throttling states) [ 3.431805] ACPI: SSDT CFF053E5, 016E (r1 PmRef CPU4Ist 3000 INTL 20050228) [ 3.270834] processor ACPI0007:04: registered as cooling_device4 [ 3.446507] ACPI: Processor [CPU4] (supports 8 throttling states) [ 3.453414] ACPI: SSDT CFF05553, 016E (r1 PmRef CPU5Ist 3000 INTL 20050228) [ 3.271042] processor ACPI0007:05: registered as cooling_device5 [ 3.468167] ACPI: Processor [CPU5] (supports 8 throttling states) [ 3.475014] ACPI: SSDT CFF056C1, 016E (r1 PmRef Cpu6Ist 3000 INTL 20050228) [ 3.467918] processor ACPI0007:06: registered as cooling_device6 [ 3.489708] ACPI: Processor [CPU6] (supports 8 throttling states) [ 3.496547] ACPI: SSDT CFF0582F, 016E (r1 PmRef Cpu7Ist 3000 INTL 20050228) [ 3.505058] processor ACPI0007:07: registered as cooling_device7 [ 3.511266] ACPI: Processor [CPU7] (supports 8 throttling states) [ 3.577486] Non-volatile memory driver v1.2 [ 3.582244] intel_rng: FWH not detected [ 3.586374] Linux agpgart interface v0.103 [ 3.590746] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 3.597254] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.603650] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.610425] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.616418] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.637353] FDC 0 is a post-1991 82077 [ 3.643999] brd: module loaded [ 3.648125] loop: module loaded [ 3.651483] tun: Universal TUN/TAP device driver, 1.6 [ 3.656733] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 3.663226] console [netcon0] enabled [ 3.667087] netconsole: network logging started [ 3.671813] Uniform Multi-Platform E-IDE driver [ 3.676626] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 3.686719] Probing IDE interface ide0... [ 4.386871] hda: Optiarc DVD RW AD-7590A, ATAPI CD/DVD-ROM drive [ 5.030061] Probing IDE interface ide1... [ 5.563407] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.568224] ide1 at 0x170-0x177,0x376 on irq 15 [ 5.066667] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 974kB Cache [ 5.584052] Uniform CD-ROM driver Revision: 3.20 [ 7.726667] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 8.179669] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 8.186885] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 8.193019] Driver 'sd' needs updating - please use bus_type methods [ 8.199622] Driver 'sr' needs updating - please use bus_type methods [ 8.206389] ata_piix 0000:00:1f.1: version 2.12 [ 8.206400] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8.213746] ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7] [ 8.221489] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16) [ 8.229757] ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177] [ 8.237502] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16) [ 8.245763] ata_piix 0000:00:1f.1: no available native port [ 8.252009] Fusion MPT base driver 3.04.07 [ 8.256298] Copyright (c) 1999-2008 LSI Corporation [ 8.261376] Fusion MPT SPI Host driver 3.04.07 [ 8.266077] Fusion MPT SAS Host driver 3.04.07 [ 8.271077] vendor=8086 device=244e [ 8.274770] found new irq_cfg for irq 17 [ 8.274771] 0 add_pin_to_irq: irq 17 --> apic 0 pin 17 [ 8.274775] found new irq_desc for irq 17 [ 8.274778] ohci1394 0000:09:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8.335284] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dc040000-dc0407ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 8.352396] ieee1394: raw1394: /dev/raw1394 device initialized [ 8.358974] usbcore: registered new interface driver usblp [ 8.364664] Initializing USB Mass Storage driver... [ 8.373899] usbcore: registered new interface driver usb-storage [ 8.380108] USB Mass Storage support registered. [ 8.385027] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 8.394944] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.400119] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.405573] mice: PS/2 mouse device common for all mice [ 8.613333] md: linear personality registered for level -1 [ 8.772496] md: raid0 personality registered for level 0 [ 8.778017] md: raid1 personality registered for level 1 [ 8.783526] md: raid10 personality registered for level 10 [ 8.843752] raid6: int64x1 2858 MB/s [ 8.903766] raid6: int64x2 3533 MB/s [ 8.963751] raid6: int64x4 3433 MB/s [ 9.023764] raid6: int64x8 2296 MB/s [ 9.083752] raid6: sse2x1 3645 MB/s [ 9.143749] raid6: sse2x2 7359 MB/s [ 9.203750] raid6: sse2x4 8798 MB/s [ 9.207697] raid6: using algorithm sse2x4 (8798 MB/s) [ 9.212940] md: raid6 personality registered for level 6 [ 9.218446] md: raid5 personality registered for level 5 [ 9.223959] md: raid4 personality registered for level 4 [ 9.229468] md: multipath personality registered for level -4 [ 9.235625] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected] [ 9.244414] cpuidle: using governor ladder [ 9.248708] cpuidle: using governor menu [ 9.252892] usbcore: registered new interface driver usbhid [ 9.258660] usbhid: v2.6:USB HID core driver [ 9.263234] oprofile: using NMI interrupt. [ 9.267730] TCP cubic registered [ 9.271247] NET: Registered protocol family 10 [ 9.276347] IPv6 over IPv4 tunneling driver [ 9.281180] NET: Registered protocol family 17 [ 9.286175] RPC: Registered udp transport module. [ 9.291082] RPC: Registered tcp transport module. [ 9.298064] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 9.304600] Freeing unused kernel memory: 676k freed [ 9.309964] Write protecting the kernel read-only data: 5576k [ 9.541223] vendor=8086 device=4021 [ 9.541227] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.541232] arcmsr 0000:01:00.0: setting latency timer to 64 [ 9.553980] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.45 2008-3-14 [ 9.566674] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable) [ 9.566675] Driver Version 1.20.00.15 2008/02/27 [ 9.557083] scsi 0:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5 [ 9.556875] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 9.557708] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 9.557708] sd 0:0:0:0: [sda] Write Protect is off [ 9.557708] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 9.556666] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.557083] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 9.554583] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 9.556875] sd 0:0:0:0: [sda] Write Protect is off [ 9.556875] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 9.557708] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.557708] sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e08100002824f8] [ 9.577500] sda1 sda2 sda3 sda4 [ 9.954660] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.954889] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.955753] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 9.956200] scsi 0:0:16:0: Attached scsi generic sg1 type 3 [ 10.023565] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 10.033876] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. [ 10.049059] Adaptec aacraid driver 1.1-5[2456]-ms [ 10.154668] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 10.156139] SGI XFS Quota Management subsystem [ 10.169930] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI [ 10.169932] Copyright (c) 1999-2006 Intel Corporation. [ 14.230000] kjournald starting. Commit interval 5 seconds [ 14.236667] EXT3-fs: mounted filesystem with ordered data mode. [ 22.764869] found new irq_cfg for irq 19 [ 22.764871] 0 add_pin_to_irq: irq 19 --> apic 0 pin 19 [ 22.764876] found new irq_desc for irq 19 [ 22.764879] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.775780] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 22.775863] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060) [ 22.775952] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.782406] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 [ 22.782408] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 22.782479] vendor=8086 device=3518 [ 22.782480] vendor=8086 device=3500 [ 22.782482] vendor=8086 device=4029 [ 22.782484] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 22.782492] e1000e 0000:06:00.0: setting latency timer to 64 [ 22.855404] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:14 [ 22.855406] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 22.855484] 0000:06:00.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 22.855506] vendor=8086 device=3518 [ 22.855507] vendor=8086 device=3500 [ 22.855508] vendor=8086 device=4029 [ 22.855510] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.855515] e1000e 0000:06:00.1: setting latency timer to 64 [ 22.932857] 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:15 [ 22.932859] 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection [ 22.932937] 0000:06:00.1: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 23.605493] EXT3 FS on sda3, internal journal [ 24.137915] XFS mounting filesystem sda4 [ 24.234165] Ending clean XFS mount for filesystem: sda4 [ 24.370791] Adding 31999992k swap on /dev/sda2. Priority:-1 extents:1 across:31999992k [ 28.090792] found new irq_cfg for irq 6291712 [ 28.090798] found new irq_desc for irq 6291712 [ 28.145496] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.766056] 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 30.768604] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 40.941246] eth0: no IPv6 routers present [ 61.380619] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 61.406663] NFSD: starting 90-second grace period
Quoted 14 lines · Ingo Molnar
Quoted 11 lines · Yinghai Lu
Quoted 7 lines · Joshua Hoblitt
I've confirmed that the boards in these systems are Tyan Tempest i5400PW (S5397)s. We've discovered a workload that will deadlock the system under both 2.6.24.2 and -tip kernel with the mtrr masking patch. The only thing unusual about this workload is that one of the binaries in it constantly segvs... Is it possible that these deadlocks (no kernel oops on console) are caused by MSR setup wierdness or is it likely unrelated?
could be other problem.
Quoted 7 lines
Quoted 3 lines
cpu should be smarter enough to understand the missing bits in mask. at least amd cpu. remember that we didn't set mask bits to 40bits with opteron with LinuxBIOS, and everything still works well.
yeah. Is the deadlock debuggable? (does nmi_watchdog=1 produce anything useful, or does the enabling of
CONFIG_PROVE_LOCKING=yshow anything weird in the syslog during light, non-deadlocking use of this workload?)
Enabling the nmi_watchdog doesn't produce anything at all (I double checked the .config... it should be working). Rebuilding with PROVE_LOCKING seems to have prevented the deadlock. It used to take 30-45 mins to lock the system up under heavy load and we're going on 6 hours here with no issues. Absolutely nothing in the dmesg. Ugh. Any other suggestions? How bad is it to leave PROVE_LOCKING enabled?
-J
--
Quoted 3 lines
Enabling the
nmi_watchdogdoesn't produce anything at all (I double checked the .config... it should be working). [...]
do the NMI counts in /proc/interrupts increase about once per second, on every CPU? Do you wait for the deadlock on a text (VGA) console, to make sure you see any NMI watchdog printout?
Ingo