New: [sata_sil] failed to IDENTIFY (I/O error, err_mask=0x3)

Bugme-new Andrew Morton 1 participant 1 message Oct 21, 2008 1 message not in the archive libata

lore

Share & tools

lore

A message that is not in the archive (sent off-list or not yet received): [email protected]/

Andrew Morton

author

2008-10-21 18:57 UTC #1 lore raw

(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).

Quoted 72 lines · On Sun, 19 Oct 2008 11:40:12 -0700 (PDT) [email protected] wrote:

http://bugzilla.kernel.org/show_bug.cgi?id=11789
           Summary: [sata_sil] failed to IDENTIFY (I/O error, err_mask=0x3)
           Product: IO/Storage
           Version: 2.5
     KernelVersion: 2.6.27.x
          Platform: All
        OS/Version: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: Serial ATA
        AssignedTo: [email protected]
        ReportedBy: [email protected]
Latest working kernel version: Any without sata_sil support
Earliest failing kernel version: 2.6.27 to 2.6.27.2 (Vanilla)
Distribution: ArchLinux, Gentoo
Hardware Environment: Acer Aspire 5051AWXMi
Software Environment: ArchLinux
Problem Description:
At boot I have this problem and it slows the boot proces (dmesg):
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_acpi 0000:00:14.1: setting latency timer to 64 scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
input: AT Translated Set 2 keyboard as /class/input/input1 ata1.00: ATA-7: WDC WD1200UE-22KVT0, 01.03K01, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48
ata1.01: ATAPI: MATSHITADVD-RAM UJ-850S, 1.20, max UDMA/33 ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
Switched to high resolution mode on CPU 0
isa bounce pool size: 16 pages
scsi 0:0:0:0: Direct-Access ATA WDC WD1200UE-22K 01.0 PQ: 0 ANSI: 5 scsi 0:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.20 PQ: 0 ANSI: 5 sata_sil 0000:00:12.0: version 2.3
scsi2 : sata_sil
scsi3 : sata_sil
ata3: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc0004080 irq 22
ata4: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc00040c0 irq 22
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x3)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x3)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x3)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x3)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x3)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x3)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Steps to reproduce:
1) Use sata_sil