Skip to contentSkip to conversation

New: Kernel panic 1gb lan connection

Bugme-new Andrew Morton 1 participant 1 message Jan 27, 2009 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]/

#1 lore raw

(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).

Quoted 27 lines · On Mon, 19 Jan 2009 02:10:36 -0800 (PST) [email protected] wrote:

http://bugzilla.kernel.org/show_bug.cgi?id=12484

           Summary: Kernel panic 1gb lan connection
           Product: Other
           Version: 2.5
     KernelVersion: 2.6.27
          Platform: All
        OS/Version: Linux
              Tree: Mainline
            Status: NEW
          Severity: high
          Priority: P1
         Component: Modules
        AssignedTo: [email protected]
        ReportedBy: [email protected]

Latest working kernel version:?
Earliest failing kernel version:2.6.27
Distribution: Fedora 10, Ubuntu, etc...
Hardware Environment: Asus P4S800D-E Delux mother board with Marvell Yukon giga-lan chipset.
Software Environment:
Problem Description: The combination of Marvel 1gb Lan connection and kernel 2.6.27 generates a kernel panic at boot. The identical setup connected to a 10/100 network boots regular.

Quoted 3 lines

Steps to reproduce: Boot system equipped with (Asus motherboard) Marvell Yukon network chipset connected to a 1gb Lan enabled network.

We'd like a bit more information about the panic please.

Ideally, set up a serial console and capture the entire kernel output. If that is not practical, perhaps a digital photograph of the screen? Setting the screen into 50-row mode beforehand is often useful.

Worst-case, just type it all in again :( Usually all the hexadecimal numbers can just be omitted when doing this.

Thanks.