Failures of testpmd on XXV710 card in VMs under Openshift Container Platform
https://bugs.dpdk.org/show_bug.cgi?id=1334
Bug ID: 1334
Summary: Failures of testpmd on XXV710 card in VMs under
Openshift Container Platform
Product: DPDK
Version: 22.11
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: Normal
Component: testpmd
Assignee: [email protected]
Reporter: [email protected]Target Milestone: ---
I met the following issue when running dpdk-testpmd under the OpenShift Virtualization environment recently. We did the test on 2 VFs, each passed through to a VM, and they come from the same PF(XXV710) on the host. However, it's found there are the following errors when I quit the test on the receiver side.
# dpdk-testpmd --socket-mem 256 --lcores 0,1 -n 1 -a 00:05:00.0 --proc-type auto --file-prefix rx -- --forward-mode=rxonly --port-topology=chained --disable-rss -i --rxq=1 --txq=1 --rxd=256 --txd=256 --nb-cores=1 --auto-start EAL: Detected CPU lcores: 2 EAL: Detected NUMA nodes: 1 EAL: Auto-detected process type: PRIMARY EAL: Detected shared linkage of DPDK EAL: Multi-process socket /var/run/dpdk/rx/mp_socket EAL: Selected IOVA mode 'PA' EAL: VFIO support initialized EAL: Using IOMMU type 8 (No-IOMMU) EAL: Probe PCI driver: net_iavf (8086:154c) device: 0000:05:00.0 (socket -1) ...... iavf_dev_init_vlan(): Failed to update vlan offload iavf_dev_configure(): configure VLAN failed: -95 iavf_set_rx_function(): request RXDID[1] in Queue[0] is legacy, set rx_pkt_burst as legacy for all queues ...... testpmd> quit Telling cores to stop... Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 158837911 RX-dropped: 0 RX-total: 158837911 TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 158837911 RX-dropped: 0 RX-total: 158837911 TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
Stopping port 0...
Stopping ports...iavf_execute_vf_cmd(): Return failure -37 for cmd 9 iavf_disable_queues(): Failed to execute command of OP_DISABLE_QUEUES iavf_stop_queues(): Fail to stop queuesiavf_stop_queues(): Fail to stop queues iavf_execute_vf_cmd(): No response for cmd 11 iavf_add_del_all_mac_addr(): fail to execute command OP_DEL_ETHER_ADDRESS Done
Shutting down port 0...
Closing ports...
Port 0 is closed
Done
Bye...
Signature · 2 lines
You are receiving this mail because: You are the assignee for the bug.