Skip to contentSkip to conversation

New: [2.6.31] Network interfaces are dead with 2.6.31 (iwlagn and sky2)

Bugme-new Andrew Morton 2 participants 3 messages Nov 3, 2009 – Nov 16, 2009 1 message not in the archive

Subsystems (3)
lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]/

#1 lore raw

(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).

Quoted 7 lines · On Wed, 21 Oct 2009 07:30:12 GMT [email protected] wrote:

http://bugzilla.kernel.org/show_bug.cgi?id=14450

           Summary: [2.6.31] Network interfaces are dead with 2.6.31
                    (iwlagn and sky2)
           Product: Drivers
           Version: 2.5
    Kernel Version: 2.6.31

Rafael, this is a 2.6.30->2.6.31 regression.

Quoted 79 lines

Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: high
Priority: P1
Component: Network
AssignedTo: [email protected]
ReportedBy: [email protected]
Regression: Yes

My wireless and ethernet networks are dead with the kernel 2.6.31. All work very fine with the 2.6.30 and older. I have a Toshiba laptop wich uses the iwlagn module for wireless and the sky2 for ethernet. I have tested with acpi=off in the grub kernel line but it freezes the system on boot... ifconfig gets only the lo interface. ifconfig eth0 or wlan0 up gets something like "the interface doesn't exist".

lspci shows:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev
03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series]
01:00.1 Audio device: ATI Technologies Inc R700 Audio Device [Radeon HD 4000 Series]
02:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100 03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040T PCI-E Fast Ethernet Controller (rev 12)
0a:01.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 0a:01.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev
02)
0a:01.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)

Dmesg shows errors on sky2 and iwlagn driver:
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks2009-10-13 17:57:36
iwlagn: Copyright(c) 2003-2009 Intel Corporation2009-10-13 17:57:36 iwlagn 0000:02:00.0: enabling device (0000 -> 0002)2009-10-13 17:57:36 iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 162009-10-13 17:57:36
iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0xFFFFFFFF2009-10-13 17:57:36
Clocksource tsc unstable (delta = -212055894 ns)2009-10-13 17:57:36 iwlagn 0000:02:00.0: Failed, HW not ready2009-10-13 17:57:36 iwlagn 0000:02:00.0: PCI INT A disabled2009-10-13 17:57:36

Quoted 6 lines

sky2 driver version 1.232009-10-13 17:50:48
sky2 0000:03:00.0: enabling device (0000 -> 0003)2009-10-13 17:50:48 sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 172009-10-13 17:50:48
sky2 0000:03:00.0: PCI INT A disabled2009-10-13 17:50:48
sky2: probe of 0000:03:00.0 failed with error -952009-10-13 17:50:48

Given that both the wired and wireless interfaces failed, I'd assume that something went wrong at the bus level. Perhaps due to an ACPI change.

Could the sky2, iwlagn and ACPI developers please take a look, offer an opinion as to where we should be looking?

Thanks.

#2 lore raw
Quoted 5 lines · Andrew Morton

(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).

Quoted 1 line

http://bugzilla.kernel.org/show_bug.cgi?id=14450

This looks like a duplicate of http://bugzilla.kernel.org/show_bug.cgi?id=13940

There's a patch in that bug that is upstream already:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=15b812f1d0a5ca8f5efe7f5882f468af10682ca8

Please try booting 2.6.31 with "pci=use_crs" and report the result.

If possible, please also try booting an upstream kernel containing the patch above (without "pci=use_crs") and report that result, too.

#3 lore raw
Quoted 9 lines · Bjorn Helgaas
Quoted 5 lines · Andrew Morton

(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).

Quoted 1 line

http://bugzilla.kernel.org/show_bug.cgi?id=14450

This looks like a duplicate of http://bugzilla.kernel.org/show_bug.cgi?id=13940

Quoted 7 lines

There's a patch in that bug that is upstream already:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=15b812f1d0a5ca8f5efe7f5882f468af10682ca8

Please try booting 2.6.31 with "pci=use_crs" and report the result.

If possible, please also try booting an upstream kernel containing the patch above (without "pci=use_crs") and report that result, too.

Ping! A.G., have you had a chance to try this out?