New: Setting BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE does not work
https://bugs.busybox.net/show_bug.cgi?id=15196
Bug ID: 15196
Summary: Setting BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE does not
work
Product: buildroot
Version: 2022.08.3
Hardware: Other
OS: Linux
Status: NEW
Severity: blocker
Priority: P5
Component: Other
Assignee: [email protected]
Reporter: [email protected]
CC: [email protected]Target Milestone: ---
.config in buildroot root has been configured with BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="xxx/boot/config.txt"
administrator@zzzz:~/project/buildroot/xxx/boot $ ls -l total 8
-rw-rw-r-- 1 administrator administrator 1612 Dec 19 22:44 config.txt
But the boot partition in the image doesn't contain my version of config.txt
What is seen in build log is
INFO: vfat(boot.vfat): adding file 'rpi-firmware/config.txt' as 'rpi-firmware/config.txt' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -sp -i '/home/administrator/project/buildroot/output/images/boot.vfat' '/home/administrator/project/buildroot/output/images/rpi-firmware/config.txt' '::'" (stderr):
Is there any other setting that needs to done?
Signature · 6 lines
You are receiving this mail because: You are on the CC list for the bug. _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
[Buildroot] [Bug 15196] Setting BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE does not work
https://bugs.busybox.net/show_bug.cgi?id=15196
[email protected] changed:
What |Removed |Added
----------------------------------------------------------------------------
Target| |RPi Zero 2W
CC| |[email protected]Signature · 6 lines
You are receiving this mail because: You are on the CC list for the bug. _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
[Buildroot] [Bug 15196] Setting BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE does not work
In reply to [email protected]https://bugs.busybox.net/show_bug.cgi?id=15196
--- Comment #1 from [email protected] ---
It turns out that output/images/rpi-firmware/config.txt hasn't updated with content from xxx/boot/config.txt
Signature · 6 lines
You are receiving this mail because: You are on the CC list for the bug. _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
[Buildroot] [Bug 15196] Setting BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE does not work
In reply to [email protected]https://bugs.busybox.net/show_bug.cgi?id=15196
Yann E. MORIN <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected] Status|NEW |RESOLVED Resolution|--- |INVALID
--- Comment #2 from Yann E. MORIN <[email protected]> --- Mats, All,
Quoted 2 lines
output/images/rpi-firmware/config.txthasn't updated with content fromxxx/boot/config.txt
config.txt is instaleld by the rpi-firmware package, so when you change it (or change BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE to point to another file), then you need to instruct Buildroot to reinstall the package:
$ make rpi-firmware-reinstall
Otherwise, when changing the configuration (like changing BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE is), Buildroot only guarantees that it is entorely taken into account on a full rebuild:
$ make clean; make
See the manual:
https://buildroot.org/downloads/manual/manual.html#_full_rebuild
Regards,
Yann E. MORIN.
Signature · 6 lines
You are receiving this mail because: You are on the CC list for the bug. _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot