Skip to contentSkip to conversation

kernel 2.6.31 loading goes in loop on IBM xSeries 330

Bug 15288 [email protected] 4 participants 11 messages Feb 12, 2010 – Feb 18, 2010 1 message not in the archive SCSI

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive

http://bugzilla.kernel.org/show_bug.cgi?id=15288

Andrew Morton <[email protected]> changed:

What |Removed |Added
----------------------------------------------------------------------------

                 CC|                            |[email protected]
          Component|Modules                     |Other
         AssignedTo|[email protected] |scsi_drivers-other@kernel-b
                   |sdl.org                     |ugs.osdl.org
            Product|Other                       |SCSI Drivers

--- Comment #3 from Andrew Morton <[email protected]> 2010-02-12 20:28:19 --- I'll reassign this regression to scsi.

I reattached the most interesting jpg screenshot: scsi_async_scan got stuck.

Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
#2 lore raw
Quoted 4 lines · On Fri, Feb 12, 2010 at 08:28:24PM +0000, [email protected]…

--- Comment #3 from Andrew Morton <[email protected]> 2010-02-12 20:28:19 --- I'll reassign this regression to scsi.

I reattached the most interesting jpg screenshot: scsi_async_scan got stuck.

This probably isn't anything to do with the scsi async scan (boot with scsi_mod.scan=sync to eliminate the possibility). It's probably a driver failing to finish the scan. Probably the reason for that is broken interrupt routing. But that's a lot of probables, so some investigation with scsi_mod.scan=sync should be used to confirm the first hypothesis before assigning the blame elsewhere.

Signature · 4 lines
Matthew Wilcox				Intel Open Source Technology Centre
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours.  We can't possibly take such
a retrograde step."
#3 lore raw
In reply to a message not in the archive

http://bugzilla.kernel.org/show_bug.cgi?id=15288

--- Comment #4 from Matthew Wilcox <[email protected]> 2010-02-12 21:15:42 ---

Quoted 4 lines · On Fri, Feb 12, 2010 at 08:28:24PM +0000, [email protected]…

--- Comment #3 from Andrew Morton <[email protected]> 2010-02-12 20:28:19 --- I'll reassign this regression to scsi.

I reattached the most interesting jpg screenshot: scsi_async_scan got stuck.

This probably isn't anything to do with the scsi async scan (boot with scsi_mod.scan=sync to eliminate the possibility). It's probably a driver failing to finish the scan. Probably the reason for that is broken interrupt routing. But that's a lot of probables, so some investigation with scsi_mod.scan=sync should be used to confirm the first hypothesis before assigning the blame elsewhere.

Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
#4 lore raw
In reply to a message not in the archive

http://bugzilla.kernel.org/show_bug.cgi?id=15288

--- Comment #5 from Domenico Palumbo <[email protected]> 2010-02-15 12:00:54 --- I've tried to boot adding at the end of the line the option "scsi_mod.scan=sync", but nothing changed, except some more messages, that I'm reporting as a screen shot "Kernel 2.6.31 boot scsi_mod.scan=sync.jpg".

Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
#5 lore raw
In reply to a message not in the archive

http://bugzilla.kernel.org/show_bug.cgi?id=15288

--- Comment #6 from Domenico Palumbo <[email protected]> 2010-02-15 12:02:48 --- Created an attachment (id=25046)
--> (http://bugzilla.kernel.org/attachment.cgi?id=25046)
Screen shot of boot using option scsi_mod.scan=sync

Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
#6 lore raw
Quoted 4 lines · On Mon, 2010-02-15 at 12:02 +0000, [email protected] wrote:

--- Comment #6 from Domenico Palumbo <[email protected]> 2010-02-15 12:02:48 --- Created an attachment (id=25046)
--> (http://bugzilla.kernel.org/attachment.cgi?id=25046)
Screen shot of boot using option scsi_mod.scan=sync

Well, the answer is at the top. It says

aic7xxx: 0000:01:03.0: Can't find IRQ for PCI INT A; probably buggy MP table

So this is an IRQ misrouting to the adaptec card as Matthew suspect. The likely cause is ACPI.

James

#7 lore raw
In reply to a message not in the archive

http://bugzilla.kernel.org/show_bug.cgi?id=15288

--- Comment #7 from Anonymous Emailer <[email protected]> 2010-02-15 15:54:53 ---
Reply-To: [email protected]

Quoted 2 lines · On Mon, 2010-02-15 at 12:02 +0000, [email protected] wrote:

--- Comment #6 from Domenico Palumbo <[email protected]> 2010-02-15 12:02:48 --- Created an attachment (id=25046)

--> (http://bugzilla.kernel.org/attachment.cgi?id=25046)

Quoted 2 lines

--> (http://bugzilla.kernel.org/attachment.cgi?id=25046)
Screen shot of boot using option scsi_mod.scan=sync

Well, the answer is at the top. It says

aic7xxx: 0000:01:03.0: Can't find IRQ for PCI INT A; probably buggy MP table

So this is an IRQ misrouting to the adaptec card as Matthew suspect. The likely cause is ACPI.

James

Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
#8 lore raw
In reply to a message not in the archive

http://bugzilla.kernel.org/show_bug.cgi?id=15288

Antti Louko <[email protected]> changed:

What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]

--- Comment #8 from Antti Louko <[email protected]> 2010-02-16 06:42:55 --- This bug also applies to kernel 2.6.32.6 (vanilla, patched with grsec) with exactly same symptoms.

The system is IBM xSeries 220 (also Pentium III Coppermine) 01:03.0 SCSI storage controller: Adaptec AIC-7892P U160/m (rev 02)

Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
#9 lore raw
In reply to a message not in the archive

http://bugzilla.kernel.org/show_bug.cgi?id=15288

--- Comment #9 from Domenico Palumbo <[email protected]> 2010-02-17 12:33:26 --- Sorry,
but I don't know if, after comment from [email protected], do I have to reassign this report to ACPI "Product"?
Thanks,

Domenico

Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
#10 lore raw
In reply to a message not in the archive

http://bugzilla.kernel.org/show_bug.cgi?id=15288

Andrew Morton <[email protected]> changed:

What |Removed |Added
----------------------------------------------------------------------------

          Component|Other                       |Config-Interrupts
         AssignedTo|scsi_drivers-other@kernel-b |acpi_config-interrupts@kern
                   |ugs.osdl.org                |el-bugs.osdl.org
            Product|SCSI Drivers                |ACPI
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.