igb_uio legacy mode can not be used in X710/XL710/XXV710
https://bugs.dpdk.org/show_bug.cgi?id=1649
Bug ID: 1649
Summary: igb_uio legacy mode can not be used in
X710/XL710/XXV710
Product: DPDK
Version: unspecified
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: Normal
Component: other
Assignee: [email protected]
Reporter: [email protected]Target Milestone: ---
X710/XL710/XXV710 NICs lack support for indicating INTx is asserted via the interrupt bit in the PCI status register. Linux deleted them from INTx support table. The related commit.
Implication:
When insmod igb_uio with intr_mode=legacy and test link status interrupt. Since INTx interrupt is not supported by X710/XL710/XXV710, it will cause Input/Output error when reading file descriptor.
Resolution/Workaround:
Do not bind igb_uio with legacy mode in X710/XL710/XXV710 NICs, or do not use kernel version >4.7 when you bind igb_uio with legacy mode.
Affected Environment/Platform:
ALL.
Driver/Module:
Poll Mode Driver (PMD).
Signature · 2 lines
You are receiving this mail because: You are the assignee for the bug.
https://bugs.dpdk.org/show_bug.cgi?id=1649
Kevin Traynor ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|UNCONFIRMED |RESOLVED
Resolution|--- |WONTFIX
CC| |[email protected]--- Comment #1 from Kevin Traynor ([email protected]) --- This report is 7 years old. At this stage, i'm sure anybody who needed this information has got it.
Signature · 2 lines
You are receiving this mail because: You are the assignee for the bug.