New: Noticeably Increased CPU temperature
A message that is not in the archive (sent off-list or not yet received): [email protected]/
Hi Rafael,
I got a copy of the below bugreport in my mailbox and I was wondering if this rings any bells.
Are there any relevant power-management / scheduler changes in 5.7 (vs 5.6) which might be related? And is there any quick way for the reporter to test this (by e.g. picking a different scheduler / cpufreq-governor).
Regards,
Hans
-------- Forwarded Message --------
Subject: [Bug 1854502] New: Noticeably Increased CPU temperature
Date: Tue, 07 Jul 2020 15:23:38 +0000
From: [email protected]
To: [email protected]
https://bugzilla.redhat.com/show_bug.cgi?id=1854502
Bug ID: 1854502
Summary: Noticeably Increased CPU temperature
Product: Fedora
Version: 32
Hardware: x86_64
OS: Linux
Status: NEW
Component: kernel
Severity: medium
Assignee: [email protected]
Reporter: [email protected]
QA Contact: [email protected]
CC: [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected]
Target Milestone: ---
Classification: Fedora
First things first, I'm running Fedora 32 with latest packages on intel 6700hq. With latest kernel-5.7, cpu temperatures are noticeably higher. Using kernel-5.6 my idle cpu temperature is around 35-40°C, but with kernel-5.7 its around 50-55. Htop and KDE System Monitor don't show anything using cpu and idle cpu usage on both kernels is 0-2%.
I first noticed this issue on kernel-5.7.6-201.fc32.x86_64, and it is also there with kernel-5.7.7-200.fc32.x86_64.
Booting with kernel-5.6.19-300.fc32.x86_64 fixes the issue.
Are you running any modules that not shipped with directly Fedora's kernel? No.
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
Rafael J. Wysocki
maintainerHi Hans,
Quoted 8 lines · Hans de Goede
Hi Rafael,
I got a copy of the below bugreport in my mailbox and I was wondering if this rings any bells.
Are there any relevant power-management / scheduler changes in 5.7 (vs 5.6) which might be related?
There were a few, but I'm not sure how they can cause thermal issues to happen.
Quoted 2 lines
And is there any quick way for the reporter to test this (by e.g. picking a different scheduler / cpufreq-governor).
Well, as usual, I would recommend looking for possible configuration differences between the good and bad cases, ie. different default governors, different cpufreq/cpuidle drivers etc.
Also, if the system is Intel-based, run turbostat to collect CPU PM information for both the good and bad cases.
Cheers,
Rafael
Quoted 48 lines
-------- Forwarded Message --------
Subject: [Bug 1854502] New: Noticeably Increased CPU temperature
Date: Tue, 07 Jul 2020 15:23:38 +0000
From: [email protected]
To: [email protected]https://bugzilla.redhat.com/show_bug.cgi?id=1854502
Bug ID: 1854502
Summary: Noticeably Increased CPU temperature
Product: Fedora
Version: 32
Hardware:x86_64
OS: Linux
Status: NEW
Component: kernel
Severity: medium
Assignee: [email protected]
Reporter: [email protected]
QA Contact: [email protected]
CC: [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected]
Target Milestone: ---
Classification: FedoraFirst things first, I'm running Fedora 32 with latest packages on intel 6700hq. With latest kernel-5.7, cpu temperatures are noticeably higher. Using kernel-5.6 my idle cpu temperature is around 35-40°C, but with kernel-5.7 its around 50-55. Htop and KDE System Monitor don't show anything using cpu and idle cpu usage on both kernels is 0-2%.
I first noticed this issue on kernel-5.7.6-201.fc32.x86_64, and it is also there with kernel-5.7.7-200.fc32.x86_64.
Booting with kernel-5.6.19-300.fc32.x86_64 fixes the issue.
Are you running any modules that not shipped with directly Fedora's kernel? No.
Hi,
Quoted 17 lines · Rafael J. Wysocki
Hi Hans,
Quoted 8 lines · Hans de Goede
Hi Rafael,
I got a copy of the below bugreport in my mailbox and I was wondering if this rings any bells.
Are there any relevant power-management / scheduler changes in 5.7 (vs 5.6) which might be related?
There were a few, but I'm not sure how they can cause thermal issues to happen.
Quoted 2 lines
And is there any quick way for the reporter to test this (by e.g. picking a different scheduler / cpufreq-governor).
Quoted 6 lines
Well, as usual, I would recommend looking for possible configuration differences between the good and bad cases, ie. different default governors, different cpufreq/cpuidle drivers etc.
Also, if the system is Intel-based, run turbostat to collect CPU PM information for both the good and bad cases.
Ok I've asked the user to run some tests and provide powertop and turbostat outputs for both the cold and hot cases.
I will follow-up on this when I know more.
Regards,
Hans
Quoted 49 lines
Quoted 48 lines
-------- Forwarded Message --------
Subject: [Bug 1854502] New: Noticeably Increased CPU temperature
Date: Tue, 07 Jul 2020 15:23:38 +0000
From: [email protected]
To: [email protected]https://bugzilla.redhat.com/show_bug.cgi?id=1854502
Bug ID: 1854502
Summary: Noticeably Increased CPU temperature
Product: Fedora
Version: 32
Hardware:x86_64
OS: Linux
Status: NEW
Component: kernel
Severity: medium
Assignee: [email protected]
Reporter: [email protected]
QA Contact: [email protected]
CC: [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected]
Target Milestone: ---
Classification: FedoraFirst things first, I'm running Fedora 32 with latest packages on intel 6700hq. With latest kernel-5.7, cpu temperatures are noticeably higher. Using kernel-5.6 my idle cpu temperature is around 35-40°C, but with kernel-5.7 its around 50-55. Htop and KDE System Monitor don't show anything using cpu and idle cpu usage on both kernels is 0-2%.
I first noticed this issue on kernel-5.7.6-201.fc32.x86_64, and it is also there with kernel-5.7.7-200.fc32.x86_64.
Booting with kernel-5.6.19-300.fc32.x86_64 fixes the issue.
Are you running any modules that not shipped with directly Fedora's kernel? No.
Hi,
Quoted 24 lines · Hans de Goede
Hi,
Quoted 21 lines · Rafael J. Wysocki
Hi Hans,
Quoted 8 lines · Hans de Goede
Hi Rafael,
I got a copy of the below bugreport in my mailbox and I was wondering if this rings any bells.
Are there any relevant power-management / scheduler changes in 5.7 (vs 5.6) which might be related?
There were a few, but I'm not sure how they can cause thermal issues to happen.
Quoted 2 lines
And is there any quick way for the reporter to test this (by e.g. picking a different scheduler / cpufreq-governor).
Well, as usual, I would recommend looking for possible configuration differences between the good and bad cases, ie. different default governors, different cpufreq/cpuidle drivers etc.
Quoted 7 lines
Quoted 2 lines
Also, if the system is Intel-based, run turbostat to collect CPU PM information for both the good and bad cases.
Ok I've asked the user to run some tests and provide powertop and turbostat outputs for both the cold and hot cases.
I will follow-up on this when I know more.
Ok, I've asked the user to gather the necessary info. He has collected screenshots from both powertop and turbostat under both 5.6 (with the CPU staying cool) and with 5.7 (where the CPU runs a bit hot) both with the system fully idle.
The screenshots are attached to the bug as a tarbal:
https://bugzilla.redhat.com/show_bug.cgi?id=1854502
I've never looked at turbostat output before so I do not know what I'm looking for there. But the powertop output does show a significant difference.
On the powertop overview page we can see that 5.7 has slightly less wakeup then 5.6 (probably just normal variation) but despite this, the "idle stats" page shows that under 5.6 we get 90/91% C7 residency, where as 5.7 only reaches 85%, that seems like a significant difference to me. IOW the CPU is in a higher powerstae (consuming more power) for 15% of the time with 5.6, vs 10% with 5.7.
Note that this users system is somewhat customized, he is using bumblebee with the nvidia binary driver to run games, while using the i915 gfx for his normal desktop stuff. Doing his tests no apps are running using the nvidia GPU and in both cases the nvidia GPU is powered-down (according to the /proc/... info).
He is also using TLP and some utility to undervolt the GPU. None of this seems to explain the C7 residency difference though, so despite his non-standard setup it would be good (IMHO) to still see if we can try to root-cause that.
Regards,
Hans
Quoted 49 lines
Quoted 49 lines
Quoted 48 lines
-------- Forwarded Message --------
Subject: [Bug 1854502] New: Noticeably Increased CPU temperature
Date: Tue, 07 Jul 2020 15:23:38 +0000
From: [email protected]
To: [email protected]https://bugzilla.redhat.com/show_bug.cgi?id=1854502
Bug ID: 1854502
Summary: Noticeably Increased CPU temperature
Product: Fedora
Version: 32
Hardware:x86_64
OS: Linux
Status: NEW
Component: kernel
Severity: medium
Assignee: [email protected]
Reporter: [email protected]
QA Contact: [email protected]
CC: [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected]
Target Milestone: ---
Classification: FedoraFirst things first, I'm running Fedora 32 with latest packages on intel 6700hq. With latest kernel-5.7, cpu temperatures are noticeably higher. Using kernel-5.6 my idle cpu temperature is around 35-40°C, but with kernel-5.7 its around 50-55. Htop and KDE System Monitor don't show anything using cpu and idle cpu usage on both kernels is 0-2%.
I first noticed this issue on kernel-5.7.6-201.fc32.x86_64, and it is also there with kernel-5.7.7-200.fc32.x86_64.
Booting with kernel-5.6.19-300.fc32.x86_64 fixes the issue.
Are you running any modules that not shipped with directly Fedora's kernel? No.
Hi,
Quoted 62 lines · Hans de Goede
Hi,
Quoted 24 lines · Hans de Goede
Hi,
Quoted 21 lines · Rafael J. Wysocki
Hi Hans,
Quoted 8 lines · Hans de Goede
Hi Rafael,
I got a copy of the below bugreport in my mailbox and I was wondering if this rings any bells.
Are there any relevant power-management / scheduler changes in 5.7 (vs 5.6) which might be related?
There were a few, but I'm not sure how they can cause thermal issues to happen.
Quoted 2 lines
And is there any quick way for the reporter to test this (by e.g. picking a different scheduler / cpufreq-governor).
Well, as usual, I would recommend looking for possible configuration differences between the good and bad cases, ie. different default governors, different cpufreq/cpuidle drivers etc.
Quoted 7 lines
Quoted 2 lines
Also, if the system is Intel-based, run turbostat to collect CPU PM information for both the good and bad cases.
Ok I've asked the user to run some tests and provide powertop and turbostat outputs for both the cold and hot cases.
I will follow-up on this when I know more.
Ok, I've asked the user to gather the necessary info. He has collected screenshots from both powertop and turbostat under both 5.6 (with the CPU staying cool) and with 5.7 (where the CPU runs a bit hot) both with the system fully idle.
The screenshots are attached to the bug as a tarbal:
https://bugzilla.redhat.com/show_bug.cgi?id=1854502
I've never looked at turbostat output before so I do not know what I'm looking for there. But the powertop output does show a significant difference.
On the powertop overview page we can see that 5.7 has slightly less wakeup then 5.6 (probably just normal variation) but despite this, the "idle stats" page shows that under 5.6 we get 90/91% C7 residency, where as 5.7 only reaches 85%, that seems like a significant difference to me. IOW the CPU is in a higher powerstae (consuming more power) for 15% of the time with 5.6, vs 10% with 5.7.
Note that this users system is somewhat customized, he is using bumblebee with the nvidia binary driver to run games, while using the i915 gfx for his normal desktop stuff. Doing his tests no apps are running using the nvidia GPU and in both cases the nvidia GPU is powered-down (according to the
/proc/... info).
Quoted 4 lines
He is also using TLP and some utility to undervolt the GPU. None of this seems to explain the C7 residency difference though, so despite his non-standard setup it would be good (IMHO) to still see if we can try to root-cause that.
The user just reported in bugzilla that the issue is gone with 5.7.8, not sure what fixed it. But now there is no need to look into this anymore.
Regards,
Hans