New: SCSI devices missing for disks attached to controller
https://bugzilla.kernel.org/show_bug.cgi?id=204769
Bug ID: 204769
Summary: SCSI devices missing for disks attached to controller
Product: SCSI Drivers
Version: 2.5
Kernel Version: 5.12.11
Hardware: Intel
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: AACRAID
Assignee: [email protected]
Reporter: [email protected]
Regression: NoWe use an Adaptec ASR8405 RAID controller with LSI backplane. The RAID controller is configured to expose attached disks to the system ("Expose RAW").
Up to Linux 5.1.12, devices would show as expected. lsscsi -v reports:
Quoted 34 lines
[0:0:0:0] disk ASR8405 storage V1.0
/dev/sda
dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:0:0/0:0:0:0]
[0:1:4:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:4:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:4/0:1:4:0]
[0:1:5:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:5:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:5/0:1:5:0]
[0:1:6:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:6:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:6/0:1:6:0]
[0:1:7:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:7:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:7/0:1:7:0]
[0:1:8:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:8:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:8/0:1:8:0]
[0:1:9:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:9:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:9/0:1:9:0]
[0:1:10:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:10:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:10/0:1:10:0]
[0:1:11:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:11:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:11/0:1:11:0]
[0:1:12:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:12:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:12/0:1:12:0]
[0:1:13:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:13:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:13/0:1:13:0]
[0:3:0:0] enclosu LSI SAS3x36 0601 -
Quoted 8 lines
dir: /sys/bus/scsi/devices/0:3:0:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:3:0/0:3:0:0]
[N:0:4:1] dsk/nvm Samsung SSD 970 PRO 1TB__1/dev/nvme0n1
dir:/sys/class/nvme/nvme0/nvme0n1[/sys/devices/pci0000:10/0000:10:01.3/0000:13:00.0/nvme/nvme0/nvme0n1]
[N:1:4:1] dsk/nvm Samsung SSD 970 PRO 1TB__1/dev/nvme1n1
dir:/sys/class/nvme/nvme1/nvme1n1[/sys/devices/pci0000:10/0000:10:01.4/0000:14:00.0/nvme/nvme1/nvme1n1]
On Linux 5.12.11, the devices are missing. lsscsi -v reports:
Quoted 4 lines
[0:0:0:0] disk ASR8405 storage V1.0
/dev/sda
dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:0:0/0:0:0:0]
[0:3:0:0] enclosu LSI SAS3x36 0601 -
Quoted 8 lines
dir: /sys/bus/scsi/devices/0:3:0:0 [/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:3:0/0:3:0:0]
[N:1:4:1] dsk/nvm Samsung SSD 970 PRO 1TB__1/dev/nvme1n1
dir:/sys/class/nvme/nvme0/nvme1n1[/sys/devices/pci0000:10/0000:10:01.3/0000:13:00.0/nvme/nvme0/nvme1n1]
[N:0:4:1] dsk/nvm Samsung SSD 970 PRO 1TB__1/dev/nvme0n1
dir:/sys/class/nvme/nvme1/nvme0n1[/sys/devices/pci0000:10/0000:10:01.4/0000:14:00.0/nvme/nvme1/nvme0n1]
Output in dmesg is basically the same, except that the following lines are missing with the newer kernel:
Quoted 19 lines
[ 17.016661] scsi 0:1:4:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.018313] scsi 0:1:5:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.020129] scsi 0:1:6:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.022530] scsi 0:1:7:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.024291] scsi 0:1:8:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.026041] scsi 0:1:9:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.027725] scsi 0:1:10:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.029395] scsi 0:1:11:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.031145] scsi 0:1:12:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.032672] scsi 0:1:13:0: Direct-Access ATA HGST HUH721212AL
Quoted 1 line
T3D0 PQ: 1 ANSI: 6
The only change on the system to obtain the different behavior is upgrade/downgrade of the kernel via kexec.
Signature · 2 lines
You are receiving this mail because: You are watching the assignee of the bug.
Quoted 158 lines · On Wed, 2019-09-04 at 15:18 +0000, [email protected] wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=204769
Bug ID: 204769
Summary: SCSI devices missing for disks attached to
controllerProduct: SCSI Drivers Version: 2.5 Kernel Version: 5.12.11 Hardware: Intel OS: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: AACRAID Assignee: [email protected] Reporter: [email protected] Regression: NoWe use an Adaptec ASR8405 RAID controller with LSI backplane. The RAID
controller is configured to expose attached disks to the system ("Expose RAW").Up to Linux 5.1.12, devices would show as expected. lsscsi -v reports:
Quoted 64 lines
[0:0:0:0] disk ASR8405 storage V1.0
/dev/sda
dir: /sys/bus/scsi/devices/0:0:0:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:0:
0/0:0:0:0]
[0:1:4:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:4:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
4/0:1:4:0]
[0:1:5:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:5:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
5/0:1:5:0]
[0:1:6:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:6:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
6/0:1:6:0]
[0:1:7:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:7:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
7/0:1:7:0]
[0:1:8:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:8:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
8/0:1:8:0]
[0:1:9:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:9:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
9/0:1:9:0]
[0:1:10:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:10:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
10/0:1:10:0]
[0:1:11:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:11:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
11/0:1:11:0]
[0:1:12:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:12:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
12/0:1:12:0]
[0:1:13:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:13:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
13/0:1:13:0]
[0:3:0:0] enclosu LSI SAS3x36 0601 -
dir: /sys/bus/scsi/devices/0:3:0:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:3:
0/0:3:0:0]
[N:0:4:1] dsk/nvm Samsung SSD 970 PRO
1TB__1/dev/nvme0n1
dir:/sys/class/nvme/nvme0/nvme0n1Quoted 8 lines
[/sys/devices/pci0000:10/0000:10:01.3/0000:13:00.0/nvme/nvme0/nvme0 n1]
[N:1:4:1] dsk/nvm Samsung SSD 970 PRO
1TB__1/dev/nvme1n1
dir:/sys/class/nvme/nvme1/nvme1n1[/sys/devices/pci0000:10/0000:10:01.4/0000:14:00.0/nvme/nvme1/nvme1 n1]
On Linux 5.12.11, the devices are missing. lsscsi -v reports:
Quoted 14 lines
[0:0:0:0] disk ASR8405 storage V1.0
/dev/sda
dir: /sys/bus/scsi/devices/0:0:0:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:0:
0/0:0:0:0]
[0:3:0:0] enclosu LSI SAS3x36 0601 -
dir: /sys/bus/scsi/devices/0:3:0:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:3:
0/0:3:0:0]
[N:1:4:1] dsk/nvm Samsung SSD 970 PRO
1TB__1/dev/nvme1n1
dir:/sys/class/nvme/nvme0/nvme1n1Quoted 8 lines
[/sys/devices/pci0000:10/0000:10:01.3/0000:13:00.0/nvme/nvme0/nvme1 n1]
[N:0:4:1] dsk/nvm Samsung SSD 970 PRO
1TB__1/dev/nvme0n1
dir:/sys/class/nvme/nvme1/nvme0n1[/sys/devices/pci0000:10/0000:10:01.4/0000:14:00.0/nvme/nvme1/nvme0 n1]
Output in dmesg is basically the same, except that the following lines are
missing with the newer kernel:Quoted 28 lines
[ 17.016661] scsi 0:1:4:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.018313] scsi 0:1:5:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.020129] scsi 0:1:6:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.022530] scsi 0:1:7:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.024291] scsi 0:1:8:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.026041] scsi 0:1:9:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.027725] scsi 0:1:10:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.029395] scsi 0:1:11:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.031145] scsi 0:1:12:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.032672] scsi 0:1:13:0: Direct-Access ATA HGSTQuoted 2 lines
HUH721212AL
T3D0 PQ: 1 ANSI: 6
Quoted 2 lines
The only change on the system to obtain the different behavior is upgrade/downgrade of the kernel via kexec.
So the driver is loading as /dev/sda is being seen above. Seems likely to be the enclosure then that is not being probed
[0:0:0:0] disk ASR8405 storage V1.0 /dev/sda
The enclosure looks like its on another port correct ? 0:1:x:x
I am looking at what may have changed in the latest commits
Quoted 1 line
[Bug 204769] SCSI devices missing for disks attached to controller
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=204769
--- Comment #1 from [email protected] ---
Quoted 158 lines · On Wed, 2019-09-04 at 15:18 +0000, [email protected] wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=204769
Bug ID: 204769
Summary: SCSI devices missing for disks attached to
controllerProduct: SCSI Drivers Version: 2.5 Kernel Version: 5.12.11 Hardware: Intel OS: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: AACRAID Assignee: [email protected] Reporter: [email protected] Regression: NoWe use an Adaptec ASR8405 RAID controller with LSI backplane. The RAID
controller is configured to expose attached disks to the system ("Expose RAW").Up to Linux 5.1.12, devices would show as expected. lsscsi -v reports:
Quoted 64 lines
[0:0:0:0] disk ASR8405 storage V1.0
/dev/sda
dir: /sys/bus/scsi/devices/0:0:0:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:0:
0/0:0:0:0]
[0:1:4:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:4:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
4/0:1:4:0]
[0:1:5:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:5:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
5/0:1:5:0]
[0:1:6:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:6:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
6/0:1:6:0]
[0:1:7:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:7:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
7/0:1:7:0]
[0:1:8:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:8:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
8/0:1:8:0]
[0:1:9:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:9:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
9/0:1:9:0]
[0:1:10:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:10:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
10/0:1:10:0]
[0:1:11:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:11:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
11/0:1:11:0]
[0:1:12:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:12:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
12/0:1:12:0]
[0:1:13:0] disk ATA HGST HUH721212AL T3D0 -
dir: /sys/bus/scsi/devices/0:1:13:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:1:
13/0:1:13:0]
[0:3:0:0] enclosu LSI SAS3x36 0601 -
dir: /sys/bus/scsi/devices/0:3:0:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:3:
0/0:3:0:0]
[N:0:4:1] dsk/nvm Samsung SSD 970 PRO
1TB__1/dev/nvme0n1
dir:/sys/class/nvme/nvme0/nvme0n1Quoted 8 lines
[/sys/devices/pci0000:10/0000:10:01.3/0000:13:00.0/nvme/nvme0/nvme0 n1]
[N:1:4:1] dsk/nvm Samsung SSD 970 PRO
1TB__1/dev/nvme1n1
dir:/sys/class/nvme/nvme1/nvme1n1[/sys/devices/pci0000:10/0000:10:01.4/0000:14:00.0/nvme/nvme1/nvme1 n1]
On Linux 5.12.11, the devices are missing. lsscsi -v reports:
Quoted 14 lines
[0:0:0:0] disk ASR8405 storage V1.0
/dev/sda
dir: /sys/bus/scsi/devices/0:0:0:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:0:
0/0:0:0:0]
[0:3:0:0] enclosu LSI SAS3x36 0601 -
dir: /sys/bus/scsi/devices/0:3:0:0[/sys/devices/pci0000:60/0000:60:03.1/0000:61:00.0/host0/target0:3:
0/0:3:0:0]
[N:1:4:1] dsk/nvm Samsung SSD 970 PRO
1TB__1/dev/nvme1n1
dir:/sys/class/nvme/nvme0/nvme1n1Quoted 8 lines
[/sys/devices/pci0000:10/0000:10:01.3/0000:13:00.0/nvme/nvme0/nvme1 n1]
[N:0:4:1] dsk/nvm Samsung SSD 970 PRO
1TB__1/dev/nvme0n1
dir:/sys/class/nvme/nvme1/nvme0n1[/sys/devices/pci0000:10/0000:10:01.4/0000:14:00.0/nvme/nvme1/nvme0 n1]
Output in dmesg is basically the same, except that the following lines are
missing with the newer kernel:Quoted 28 lines
[ 17.016661] scsi 0:1:4:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.018313] scsi 0:1:5:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.020129] scsi 0:1:6:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.022530] scsi 0:1:7:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.024291] scsi 0:1:8:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.026041] scsi 0:1:9:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.027725] scsi 0:1:10:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.029395] scsi 0:1:11:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.031145] scsi 0:1:12:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 1 ANSI: 6 [ 17.032672] scsi 0:1:13:0: Direct-Access ATA HGSTQuoted 2 lines
HUH721212AL
T3D0 PQ: 1 ANSI: 6
Quoted 2 lines
The only change on the system to obtain the different behavior is upgrade/downgrade of the kernel via kexec.
So the driver is loading as /dev/sda is being seen above. Seems likely to be the enclosure then that is not being probed
[0:0:0:0] disk ASR8405 storage V1.0 /dev/sda
The enclosure looks like its on another port correct ? 0:1:x:x
I am looking at what may have changed in the latest commits
Quoted 1 line
Signature · 2 lines
You are receiving this mail because: You are watching the assignee of the bug.
[Bug 204769] SCSI devices missing for disks attached to controller
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=204769
--- Comment #2 from Johannes Jordan ([email protected]) ---
Quoted 2 lines
The enclosure looks like its on another port correct ? 0:1:x:x
Funny enough, the enclosure is 0:3:0:0, and is properly exposed by both kernel versions.
Btw., it seems like this is a duplicate of
https://bugzilla.kernel.org/show_bug.cgi?id=204173. Sorry I didn't spot it when submitting, got confused by how Bugzilla orders search results.
Signature · 2 lines
You are receiving this mail because: You are watching the assignee of the bug.
[Bug 204769] SCSI devices missing for disks attached to controller
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=204769
Nathanial ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #3 from Nathanial ([email protected]) ---
I am seeing the exact same issue.
No hardware changes, but updating beyond 5.2 breaks this.
I'll note that if you force the expose_physicals Parm to 1, the disks do still become exposed as /dev/ah* and /dev/sd* even behind an array.
In protect mode( -1 ), sg* should be RO but is not exposed at all.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 204769] SCSI devices missing for disks attached to controller
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=204769
Tim Düsterhus ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #4 from Tim Düsterhus ([email protected]) ---
I believe I've run into the same issue with my Debian Distro kernel (5.10.x) and reported it in Debian's bug tracker at:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1027921.
This Kernel.org bug was linked in Debian's Tracker and this comment is intended to provide the backlink.
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1027921#47 also suggests that
https://github.com/torvalds/linux/commit/948e922fc44611ee2de0c89583ca958cb5307d36
might be the cause of this bug. I'm not personally qualified to tell.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 204769] SCSI devices missing for disks attached to controller
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=204769
Martin Wilck ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #5 from Martin Wilck ([email protected]) --- Personally, I'd say that 948e922fc446 ("scsi: core: map PQ=1, PDT=other values to SCSI_SCAN_TARGET_PRESENT") is indeed broken.
But this has been discussed previously, and the SCSI maintainer disagrees:
https://www.mail-archive.com/[email protected]/msg84659.html
Back then, the proposed solution was to "either have a SCSI host flag to override the behavior or consider masking PQ in the driver", but apparently neither idea has been implemented.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.