Skip to contentSkip to conversation

New: Support ATA command passthrough for iSCSI -> SATA

Bug 215311 [email protected] 1 participant 1 message Dec 12, 2021 SCSI

lore
Share & tools
lore
#0 lore raw

https://bugzilla.kernel.org/show_bug.cgi?id=215311

            Bug ID: 215311
           Summary: Support ATA command passthrough for iSCSI -> SATA
           Product: IO/Storage
           Version: 2.5
    Kernel Version: 5.10.x
          Hardware: All
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: enhancement
          Priority: P1
         Component: SCSI
          Assignee: [email protected]
          Reporter: [email protected]
        Regression: No

This would be a nice feature for using smartctl over iSCSI (where the target is a SATA disk). So far, this seems to be needed in the iSCSI target implementation or another part of the target's SCSI layer or SATA glue code. I can actually send ATA passthrough commands (0x85) from a Linux initiator, just the target rejects them as invalid or unknown.

Hints which subsystem or even source file would handle this would be nice too, maybe I could attempt a patch (though somewhat unlikely I would succeed).

Does iSCSI+SATA really work by translating SCSI commands to ATA commands? Crazy world if that's correct.

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.