New: sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
https://bugzilla.kernel.org/show_bug.cgi?id=215447
Bug ID: 215447
Summary: sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
Product: SCSI Drivers
Version: 2.5
Kernel Version: 5.15.6
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
Assignee: [email protected]
Reporter: [email protected]
Regression: NoCreated attachment 300216
--> https://bugzilla.kernel.org/attachment.cgi?id=300216&action=edit
SUSE Tumbleweed default kernel with CONFIG_FUSION_LOGGING (debug_level 0x488)
scsi_lib.c: scsi_mode_sense() has defaults assuming MODE_SENSE_10, fallback to MODE_SENSE if that fails.
sr.c: doesn't set sdev->use_10_for_ms. In my case this causes scsi_mode_sense() to fail and "scsi-1 drive" fallback to be selected.
I tried setting use_10_for_ms in the sr_probe() function, seems to work for code page 0x2A, as requested by sr.c.
I'm unsure where the request for code page 0x19 originates / if failure is acceptable or if it indicates another issue.
4 attachments
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
https://bugzilla.kernel.org/show_bug.cgi?id=215447
--- Comment #1 from Chris Horler ([email protected]) --- Created attachment 300217
--> https://bugzilla.kernel.org/attachment.cgi?id=300217&action=edit
SUSE Tumbleweed kernel with fix
notable by omission of messages (only error conditions are logged by mptscsih)
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=215447
--- Comment #2 from Chris Horler ([email protected]) --- Created attachment 300218
--> https://bugzilla.kernel.org/attachment.cgi?id=300218&action=edit
my understanding of a typical scsi messages / error codes from the logs
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=215447
--- Comment #3 from Chris Horler ([email protected]) --- Created attachment 300219
--> https://bugzilla.kernel.org/attachment.cgi?id=300219&action=edit
add use_10_for_ms default to sr.c
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=215447
--- Comment #4 from Chris Horler ([email protected]) --- self-ping my list-email
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
Re: [Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
Is anyone able to comment on the sr_mod / cdrom / mptsas issue I'm experiencing (see details in bug)?
I fixed my issue with a one line patch, but I'd like to know if it's correct and what I should do to have it integrated upstream.
Thanks, Chris
Quoted 11 lines · On Sat, 15 Jan 2022 at 11:42, <[email protected]> wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=215447
--- Comment #4 from Chris Horler ([email protected]) --- self-ping my list-email
--
You may reply to this email to add a comment.You are receiving this mail because:
You are watching the assignee of the bug.
[Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=215447
--- Comment #5 from Chris Horler ([email protected]) --- Is anyone able to comment on the sr_mod / cdrom / mptsas issue I'm experiencing (see details in bug)?
I fixed my issue with a one line patch, but I'd like to know if it's correct and what I should do to have it integrated upstream.
Thanks, Chris
Quoted 11 lines · On Sat, 15 Jan 2022 at 11:42, <[email protected]> wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=215447
--- Comment #4 from Chris Horler ([email protected]) --- self-ping my list-email
--
You may reply to this email to add a comment.You are receiving this mail because:
You are watching the assignee of the bug.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
Re: [Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
In reply to Christopher HorlerChristopher,
Quoted 4 lines
Is anyone able to comment on the
sr_mod/ cdrom / mptsas issue I'm experiencing (see details in bug)? I fixed my issue with a one line patch, but I'd like to know if it's correct and what I should do to have it integrated upstream.
My concern is that switching to MODE SENSE(10) by default could break things for other devices.
There are compelling arguments that we should use MODE SENSE(10). Most ROM devices appear to favor it. The specs allow both but MMC3 (2001) mentions MODE SENSE(10) as "shall implement" although it doesn't go as far as marking it as mandatory in the SCSI command table.
In the current code we fall back to the MODE SENSE(6) command if a MODE SENSE(10) fails. So if we change the default, unless a device hangs when we send the 10-byte command, we should be OK.
Another option is to allow a fallback to the 10-byte command if the 6-byte command fails. We currently don't do that because MODE SENSE(6) was required for so many years. This way we could accommodate devices such as yours without the risk of changing the default.
The good news is that the "consumer" transports (ATA, FireWire, USB) all use MODE SENSE(10) by default. So we are really only talking about changing things for SPI-attached devices which typically are well-behaved. So my hunch is that switching the default is probably OK, although I would like the 6/10-byte fallback mechanism to work in both directions as well.
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering
[Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=215447
--- Comment #6 from Martin K. Petersen ([email protected]) --- Christopher,
Quoted 4 lines
Is anyone able to comment on the
sr_mod/ cdrom / mptsas issue I'm experiencing (see details in bug)? I fixed my issue with a one line patch, but I'd like to know if it's correct and what I should do to have it integrated upstream.
My concern is that switching to MODE SENSE(10) by default could break things for other devices.
There are compelling arguments that we should use MODE SENSE(10). Most ROM devices appear to favor it. The specs allow both but MMC3 (2001) mentions MODE SENSE(10) as "shall implement" although it doesn't go as far as marking it as mandatory in the SCSI command table.
In the current code we fall back to the MODE SENSE(6) command if a MODE SENSE(10) fails. So if we change the default, unless a device hangs when we send the 10-byte command, we should be OK.
Another option is to allow a fallback to the 10-byte command if the 6-byte command fails. We currently don't do that because MODE SENSE(6) was required for so many years. This way we could accommodate devices such as yours without the risk of changing the default.
The good news is that the "consumer" transports (ATA, FireWire, USB) all use MODE SENSE(10) by default. So we are really only talking about changing things for SPI-attached devices which typically are well-behaved. So my hunch is that switching the default is probably OK, although I would like the 6/10-byte fallback mechanism to work in both directions as well.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=215447
--- Comment #7 from Chris Horler ([email protected]) ---
is it risky to implement the fallback mechanism in both directions? is there a chance of forever retry? (fail 6, fail 10, fail 6, fail 10...)
scsi_lib.c:scsi_mode_sense(): ...
if (!scsi_status_is_good(result) &&
driver_byte(result) == DRIVER_SENSE) {
if (scsi_sense_valid(sshdr)) {
if ((sshdr->sense_key == ILLEGAL_REQUEST) &&
(sshdr->asc == 0x20) && (sshdr->ascq == 0)) {
/*
* Invalid command operation code
*/
sdev->use_10_for_ms = !sdev->use_10_for_ms;
goto retry;
}
}
}I guess I could increase the default retry_count at initialisation and also decrementing it here.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
Re: [Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
Quoted 3 lines
is it risky to implement the fallback mechanism in both directions? is there a chance of forever retry? (fail 6, fail 10, fail 6, fail 10...)
Just a heads-up that I am still working on a reasonable way to go about this. It is not entirely trivial to perform the transition from MODE SENSE(6) to (10) given how the SCSI disk driver works.
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering
[Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=215447
--- Comment #8 from Martin K. Petersen ([email protected]) ---
Quoted 2 lines
is it risky to implement the fallback mechanism in both directions? is there a chance of forever retry? (fail 6, fail 10, fail 6, fail 10...)
Just a heads-up that I am still working on a reasonable way to go about this. It is not entirely trivial to perform the transition from MODE SENSE(6) to (10) given how the SCSI disk driver works.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=215447
--- Comment #9 from Chris Horler ([email protected]) --- okay, thanks for the update!
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=215447
--- Comment #10 from Chris Horler ([email protected]) --- any update on this?
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.