Skip to contentSkip to conversation

New: test_meminit: failures: 70 out of 130 / reference already released.

Bug 217191 Andrew Morton 4 participants 6 messages Mar 14, 2023 – Mar 16, 2023 1 message not in the archive Memory management

lore
Share & tools
lore

Andrew Morton

author maintainer
#1 lore raw
In reply to a message not in the archive

(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).

Quoted 5 lines · On Tue, 14 Mar 2023 05:23:31 +0000 [email protected] wrote:

https://bugzilla.kernel.org/show_bug.cgi?id=217191

Bug ID: 217191
Summary: test_meminit: failures: 70 out of 130 / reference
already released.

Alexander, could you please take a look? Thanks.

Quoted 170 lines
           Product: Memory Management
           Version: 2.5
    Kernel Version: 6.2.6, 6.2.5, 5.17.11
          Hardware: All
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: Other
          Assignee: [email protected]
          Reporter: [email protected]
        Regression: No

With CONFIG_TEST_MEMINIT=y (at least), looks like this has been happening since, at least 5.17.11 kernel, on Gentoo, and I've only noticed it since 6.2.5 and now on 6.2.6 kernel as well.

I've some logs saved from previous kernels, if needed.

```
[    0.000000] Linux version 6.2.6-gentoo-x86_64 (_kernelbuilder@i87k) (gcc
(Gentoo 12.2.1_p20230304 p13) 12.2.1 20230304, GNU ld (Gentoo 2.40 p3) 2.40.0)
#1 SMP Tue Mar 14 05:47:58 CET 2023
...
[   25.431948] test_uuid: all 18 tests passed
[   25.432064] test_memcat_p: test passed
[   25.435701] test_meminit: test_pages failed 10 out of 10 times
[   25.437724] test_meminit: test_kvmalloc failed 40 out of 40 times
[   25.447595] test_meminit: test_kmemcache failed 20 out of 70 times
[   25.447797] test_meminit: all 10 tests in test_rcu_persistent passed
[   25.447912] test_meminit: failures: 70 out of 130
[   25.448044] reference already released.
[   25.448153] allocated in:
[   25.448260]  test_ref_tracker_init+0xa6/0x1e0
[   25.448374]  do_one_initcall+0xb1/0x210
[   25.448485]  kernel_init_freeable+0x197/0x250
[   25.448597]  kernel_init+0x11/0x1d0
[   25.448708]  ret_from_fork+0x1f/0x30
[   25.448818] freed in:
[   25.448925]  test_ref_tracker_init+0x185/0x1e0
[   25.449885]  do_one_initcall+0xb1/0x210
[   25.449885]  kernel_init_freeable+0x197/0x250
[   25.449885]  kernel_init+0x11/0x1d0
[   25.449885]  ret_from_fork+0x1f/0x30
[   25.451220] ------------[ cut here ]------------
[   25.451331] WARNING: CPU: 2 PID: 1 at lib/ref_tracker.c:136
ref_tracker_free+0x233/0x2a0
[   25.451464] Modules linked in:
[   25.451572] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G     U          TN
6.2.6-gentoo-x86_64 #1 644473e507c86b163c18e9f84729e44d3514c8d0
[   25.451710] Hardware name: System manufacturer System Product Name/PRIME
Z370-A, BIOS 3004 07/12/2021
[   25.451843] RIP: 0010:ref_tracker_free+0x233/0x2a0
[   25.451956] Code: e9 71 ff ff ff 48 c7 c7 e8 88 d7 9b e8 96 3d a5 ff 8b 55
14 85 d2 75 51 8b 45 18 85 c0 75 34 4c 89 e6 48 89 df e8 6d e7 b2 00 <0f> 0b b8
ea ff ff ff e9 42 ff ff ff 48 8d 7b 08 b8 ff ff ff ff f0
[   25.452119] RSP: 0000:ffffb4c68000bdf8 EFLAGS: 00010246
[   25.452232] RAX: 0000000000000000 RBX: ffffffff9d200ee0 RCX:
0000000000000000
[   25.452361] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
0000000000000000
[   25.452490] RBP: ffff9ac5c0989900 R08: 0000000000000000 R09:
0000000000000000
[   25.452618] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000246
[   25.452747] R13: 0000000004500000 R14: 0000000000000000 R15:
0000000000000000
[   25.452876] FS:  0000000000000000(0000) GS:ffff9ad51a280000(0000)
knlGS:0000000000000000
[   25.453006] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.453119] CR2: 0000000000000000 CR3: 000000040200b001 CR4:
00000000003706e0
[   25.453258] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[   25.453387] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[   25.453515] Call Trace:
[   25.453622]  <TASK>
[   25.453729]  ? test_ref_tracker_init+0x19a/0x1e0
[   25.453841]  ? do_one_initcall+0xb1/0x210
[   25.453952]  ? kernel_init_freeable+0x197/0x250
[   25.454065]  ? kernel_init+0x11/0x1d0
[   25.454175]  ? ret_from_fork+0x1f/0x30
[   25.454285]  ? test_meminit_init+0x940/0x940
[   25.454396]  test_ref_tracker_init+0x19a/0x1e0
[   25.454508]  do_one_initcall+0xb1/0x210
[   25.454619]  kernel_init_freeable+0x197/0x250
[   25.454731]  ? rest_init+0xa0/0xa0
[   25.454841]  kernel_init+0x11/0x1d0
[   25.454952]  ret_from_fork+0x1f/0x30
[   25.455062]  </TASK>
[   25.455169] ---[ end trace 0000000000000000 ]---
[   25.455281] leaked reference.
[   25.455389]  test_ref_tracker_timer_func+0x18/0x30
[   25.455502]  call_timer_fn.constprop.0+0xe/0x80
[   25.455614]  __run_timers+0x22b/0x270
[   25.455724]  run_timer_softirq+0x14/0x30
[   25.455835]  __do_softirq+0xb9/0x210
[   25.455945] leaked reference.
[   25.456053]  test_ref_tracker_init+0x9a/0x1e0
[   25.456165]  do_one_initcall+0xb1/0x210
[   25.456275]  kernel_init_freeable+0x197/0x250
[   25.456386]  kernel_init+0x11/0x1d0
[   25.456496]  ret_from_fork+0x1f/0x30
[   25.456610] ------------[ cut here ]------------
[   25.456721] WARNING: CPU: 2 PID: 1 at lib/ref_tracker.c:39
ref_tracker_dir_exit+0x110/0x180
[   25.456854] Modules linked in:
[   25.456962] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G     U  W       TN
6.2.6-gentoo-x86_64 #1 644473e507c86b163c18e9f84729e44d3514c8d0
[   25.457101] Hardware name: System manufacturer System Product Name/PRIME
Z370-A, BIOS 3004 07/12/2021
[   25.457233] RIP: 0010:ref_tracker_dir_exit+0x110/0x180
[   25.457347] Code: 48 89 c5 48 c7 c7 a3 88 d7 9b e8 3b 40 a5 ff 41 8b 7e 14
85 ff 74 a7 e8 8e fd ff ff eb a0 48 8b 34 24 48 89 df e8 10 ea b2 00 <0f> 0b 8b
43 08 83 f8 01 75 35 8b 43 0c 83 f8 01 75 37 48 83 c4 08
[   25.457509] RSP: 0000:ffffb4c68000be70 EFLAGS: 00010246
[   25.457622] RAX: ffffffff9d200ef8 RBX: ffffffff9d200ee0 RCX:
0000000000000000
[   25.457751] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
0000000000000000
[   25.457880] RBP: ffffffff9d200ef8 R08: 0000000000000000 R09:
0000000000000000
[   25.458008] R10: 0000000000000000 R11: 0000000000000000 R12:
ffffffff9d200ef8
[   25.458136] R13: ffffffff9d200ef8 R14: ffffffff9d200ef8 R15:
dead000000000100
[   25.458265] FS:  0000000000000000(0000) GS:ffff9ad51a280000(0000)
knlGS:0000000000000000
[   25.458396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.458509] CR2: 0000000000000000 CR3: 000000040200b001 CR4:
00000000003706e0
[   25.458637] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[   25.458766] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[   25.458894] Call Trace:
[   25.459001]  <TASK>
[   25.459108]  ? test_meminit_init+0x940/0x940
[   25.459220]  test_ref_tracker_init+0x1c4/0x1e0
[   25.459332]  do_one_initcall+0xb1/0x210
[   25.459442]  kernel_init_freeable+0x197/0x250
[   25.459554]  ? rest_init+0xa0/0xa0
[   25.459664]  kernel_init+0x11/0x1d0
[   25.459774]  ret_from_fork+0x1f/0x30
[   25.459886]  </TASK>
[   25.459992] ---[ end trace 0000000000000000 ]---
[   25.460106] test_div64: Starting 64bit/32bit division and modulo test
[   25.460858] test_div64: Completed 64bit/32bit division and modulo test,
0.000637198s elapsed
[   25.461843] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[   25.461955] crc32: self tests passed, processed 225944 bytes in 108224 nsec
[   25.462193] crc32c: CRC_LE_BITS = 64
[   25.462302] crc32c: self tests passed, processed 112972 bytes in 54045 nsec
[   25.471308] crc32_combine: 8373 self tests passed
[   25.480294] crc32c_combine: 8373 self tests passed
[   25.480908] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[   25.481038] interval tree insert/remove
[   25.483347]  -> 8535 cycles
[   25.483564] interval tree search
[   25.500073]  -> 61061 cycles (2692 results)
[   25.500346] pciehp: pcie_port_service_register = 0
```
Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
#2 lore raw

Hi Emmanuel,

Can you please share the kernel config where the problem is reproducible, along with the full dmesg?

I think "test_meminit: failures: 70 out of 130" is a red herring, the kernel probably does not enable memory initialization, that's why the tests are failing.
We could see that from the "mem auto-init" line in the dmesg, but it got stripped away.
The leaked reference probably belongs to lib/test_ref_tracker.c, which is a completely different test suite.

#3 lore raw
Quoted 7 lines · Alexander Potapenko

Hi Emmanuel,

hello, thank you for looking into this.

Can you please share the kernel config where the problem is reproducible, along with the full dmesg?

attached both

Quoted 9 lines

I think "test_meminit: failures: 70 out of 130" is a red herring, the kernel probably does not enable memory initialization, that's why the tests are failing.
We could see that from the "mem auto-init" line in the dmesg, but it got stripped away.
The leaked reference probably belongs to lib/test_ref_tracker.c, which is a completely different test suite.

[    0.000000] microcode: microcode updated early to revision 0xf0, date = 2021-11-15
[    0.000000] Linux version 6.2.6-gentoo-x86_64 (_kernelbuilder@i87k) (gcc (Gentoo 12.2.1_p20230304 p13) 12.2.1 20230304, GNU ld (Gentoo 2.40 p3) 2.40.0) #1 SMP Tue Mar 14 05:47:58 CET 2023
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.2.6-gentoo-x86_64 root=UUID=ae174e75-7960-44f7-9ae0-3fcef5efae64 ro root_trim=yes rd.luks.allow-discards rd.luks.options=discard ipv6.disable=1 ipv6.disable_ipv6=1 ipv6.autoconf=0 loglevel=15 log_buf_len=16M ignore_loglevel printk.always_kmsg_dump=y printk.time=y printk.devkmsg=on fbcon=scrollback:4096k fbcon=font:ProFont6x11 net.ifnames=0 nolvm dobtrfs gk.log.keep=true console=tty1 earlyprintk=vga audit=0 systemd.log_target=kmsg systemd.journald.forward_to_console=1 enforcing=0 udev.children-max=1256 rd.udev.children-max=1256 nohz=on oops=panic crashkernel=1536M panic=0 print_fatal_signals=1 psi=1 sysrq_always_enabled random.trust_cpu=off logo.nologo lpj=0 mce=bootlog reboot=force,cold noexec=on nohibernate scsi_mod.use_blk_mq=1 consoleblank=120 mitigations=off nospectre_v1 nospectre_v2 spectre_v2=off nospec_store_bypass_disable kvm-intel.vmentry_l1d_flush=never l1tf=off nopti pti=off no_stf_barrier noibrs noibpb ssbd=force-off srbds=off spectre_v2_user=off noretpoline mds=off pnp.debug=1 rd.log=all noefi cpuidle.governor=menu zram.num_devices=4 zswap.enabled=0 zswap.same_filled_pages_enabled=1 zswap.compressor=zstd zswap.max_pool_percent=40 zswap.zpool=z3fold vsyscall=none apparmor=0 acpi_force_table_verification systemd.mask=dhcpcd@ page_owner=on debug_pagealloc=on page_poison=1 init_on_free=0 init_on_alloc=0 page_table_check=on numa_balancing=disable numa=off i915.enable_fbc=1 i915.verbose_state_checks=1 i915.enable_hangcheck=1 i915.error_capture=1 nvme.poll_queues=6 enable_mtrr_cleanup delayacct mminit_loglevel=4 memory_corruption_check_period=60 memory_corruption_check=1 memory_corruption_check_size=600K randomize_kstack_offset=on memtest=3
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 2032
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009187afff] usable
[    0.000000] BIOS-e820: [mem 0x000000009187b000-0x00000000918b5fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000918b6000-0x0000000091c69fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000091c6a000-0x0000000091c6afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000091c6b000-0x0000000091c6bfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000091c6c000-0x00000000984ecfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000984ed000-0x0000000099dd1fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000099dd2000-0x0000000099de6fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000099de7000-0x0000000099ee6fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000099ee7000-0x000000009a20efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009a20f000-0x000000009afa0fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009afa1000-0x000000009affefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000105effffff] usable
[    0.000000] printk: debug: ignoring loglevel setting.
[    0.000000] printk: bootconsole [earlyvga0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: System manufacturer System Product Name/PRIME Z370-A, BIOS 3004 07/12/2021
[    0.000000] tsc: Detected 3700.000 MHz processor
[    0.000000] tsc: Detected 3699.850 MHz TSC
[    0.000331] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.003049] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.003964] last_pfn = 0x105f000 max_arch_pfn = 0x400000000
[    0.004877] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.007799] last_pfn = 0x9afff max_arch_pfn = 0x400000000
[    0.013482] found SMP MP-table at [mem 0x000fce20-0x000fce2f]
[    0.014424] check: Scanning 1 areas for low memory corruption
[    0.015336] Using GB pages for direct mapping
[    0.016822] early_memtest: # of tests: 3
[    0.017729]   0x0000000000100000 - 0x0000000035e6d000 pattern 5555555555555555
[    0.117418]   0x0000000036f2e000 - 0x000000009187b000 pattern 5555555555555555
[    0.284067]   0x00000000918b6000 - 0x0000000091c6a000 pattern 5555555555555555
[    0.286290]   0x0000000091c6c000 - 0x00000000984ed000 pattern 5555555555555555
[    0.299716]   0x0000000099de7000 - 0x0000000099ee7000 pattern 5555555555555555
[    0.301630]   0x000000009afa1000 - 0x000000009afff000 pattern 5555555555555555
[    0.303475]   0x0000000100000000 - 0x0000000c92000000 pattern 5555555555555555
[    5.680151]   0x0000000c9540d000 - 0x000000105f000000 pattern 5555555555555555
[    7.440413]   0x0000000000100000 - 0x0000000035e6d000 pattern ffffffffffffffff
[    7.538747]   0x0000000036f2e000 - 0x000000009187b000 pattern ffffffffffffffff
[    7.703091]   0x00000000918b6000 - 0x0000000091c6a000 pattern ffffffffffffffff
[    7.705308]   0x0000000091c6c000 - 0x00000000984ed000 pattern ffffffffffffffff
[    7.718921]   0x0000000099de7000 - 0x0000000099ee7000 pattern ffffffffffffffff
[    7.720837]   0x000000009afa1000 - 0x000000009afff000 pattern ffffffffffffffff
[    7.722681]   0x0000000100000000 - 0x0000000c92000000 pattern ffffffffffffffff
[   13.119164]   0x0000000c9540d000 - 0x000000105f000000 pattern ffffffffffffffff
[   14.890367]   0x0000000000100000 - 0x0000000035e6d000 pattern 0000000000000000
[   14.990100]   0x0000000036f2e000 - 0x000000009187b000 pattern 0000000000000000
[   15.158368]   0x00000000918b6000 - 0x0000000091c6a000 pattern 0000000000000000
[   15.160590]   0x0000000091c6c000 - 0x00000000984ed000 pattern 0000000000000000
[   15.174201]   0x0000000099de7000 - 0x0000000099ee7000 pattern 0000000000000000
[   15.176114]   0x000000009afa1000 - 0x000000009afff000 pattern 0000000000000000
[   15.177958]   0x0000000100000000 - 0x0000000c92000000 pattern 0000000000000000
[   20.573579]   0x0000000c9540d000 - 0x000000105f000000 pattern 0000000000000000
[   22.350673] printk: log_buf_len: 16777216 bytes
[   22.351582] printk: early log buf free: 2089880(99%)
[   22.352491] RAMDISK: [mem 0x35e6d000-0x36f2dfff]
[   22.353403] ACPI: Early table checksum verification enabled
[   22.354315] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[   22.355228] ACPI: XSDT 0x000000009187B0A8 0000CC (v01 ALASKA A M I    01072009 AMI  00010013)
[   22.357044] ACPI: FACP 0x00000000918A8EB8 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[   22.358932] ACPI: DSDT 0x000000009187B210 02DCA2 (v02 ALASKA A M I    01072009 INTL 20160422)
[   22.360757] ACPI: FACS 0x000000009A20EF00 000040
[   22.361891] ACPI: APIC 0x00000000918A8FD0 0000F4 (v03 ALASKA A M I    01072009 AMI  00010013)
[   22.363714] ACPI: FPDT 0x00000000918A90C8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[   22.365536] ACPI: FIDT 0x00000000918A9110 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[   22.367358] ACPI: WSMT 0x00000000918B5B70 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[   22.369180] ACPI: MCFG 0x00000000918A9208 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[   22.371003] ACPI: SSDT 0x00000000918A9248 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
[   22.372830] ACPI: SSDT 0x00000000918A95F0 003043 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[   22.374658] ACPI: SSDT 0x00000000918AC638 002611 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[   22.376482] ACPI: HPET 0x00000000918AEC50 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
[   22.378539] ACPI: SSDT 0x00000000918AEC88 0011A2 (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
[   22.380365] ACPI: SSDT 0x00000000918AFE30 000B13 (v02 INTEL  xh_rvp08 00000000 INTL 20160422)
[   22.382191] ACPI: UEFI 0x00000000918B0948 000042 (v01 ALASKA A M I    00000002      01000013)
[   22.384018] ACPI: SSDT 0x00000000918B0990 0017AE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[   22.385844] ACPI: LPIT 0x00000000918B2140 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[   22.387670] ACPI: SSDT 0x00000000918B21D8 000141 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[   22.389496] ACPI: SSDT 0x00000000918B2320 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[   22.391327] ACPI: SSDT 0x00000000918B25C0 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[   22.393154] ACPI: SSDT 0x00000000918B55C8 000517 (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[   22.395201] ACPI: DBGP 0x00000000918B5AE0 000034 (v01 INTEL           00000002 MSFT 0000005F)
[   22.397028] ACPI: DBG2 0x00000000918B5B18 000054 (v00 INTEL           00000002 MSFT 0000005F)
[   22.398842] ACPI: Reserving FACP table memory at [mem 0x918a8eb8-0x918a8fcb]
[   22.400654] ACPI: Reserving DSDT table memory at [mem 0x9187b210-0x918a8eb1]
[   22.402465] ACPI: Reserving FACS table memory at [mem 0x9a20ef00-0x9a20ef3f]
[   22.404276] ACPI: Reserving APIC table memory at [mem 0x918a8fd0-0x918a90c3]
[   22.406086] ACPI: Reserving FPDT table memory at [mem 0x918a90c8-0x918a910b]
[   22.407896] ACPI: Reserving FIDT table memory at [mem 0x918a9110-0x918a91ab]
[   22.409707] ACPI: Reserving WSMT table memory at [mem 0x918b5b70-0x918b5b97]
[   22.411749] ACPI: Reserving MCFG table memory at [mem 0x918a9208-0x918a9243]
[   22.413560] ACPI: Reserving SSDT table memory at [mem 0x918a9248-0x918a95ea]
[   22.415371] ACPI: Reserving SSDT table memory at [mem 0x918a95f0-0x918ac632]
[   22.417182] ACPI: Reserving SSDT table memory at [mem 0x918ac638-0x918aec48]
[   22.418992] ACPI: Reserving HPET table memory at [mem 0x918aec50-0x918aec87]
[   22.420804] ACPI: Reserving SSDT table memory at [mem 0x918aec88-0x918afe29]
[   22.422615] ACPI: Reserving SSDT table memory at [mem 0x918afe30-0x918b0942]
[   22.424426] ACPI: Reserving UEFI table memory at [mem 0x918b0948-0x918b0989]
[   22.426237] ACPI: Reserving SSDT table memory at [mem 0x918b0990-0x918b213d]
[   22.428275] ACPI: Reserving LPIT table memory at [mem 0x918b2140-0x918b21d3]
[   22.430085] ACPI: Reserving SSDT table memory at [mem 0x918b21d8-0x918b2318]
[   22.431895] ACPI: Reserving SSDT table memory at [mem 0x918b2320-0x918b25be]
[   22.433705] ACPI: Reserving SSDT table memory at [mem 0x918b25c0-0x918b55c1]
[   22.435516] ACPI: Reserving SSDT table memory at [mem 0x918b55c8-0x918b5ade]
[   22.437327] ACPI: Reserving DBGP table memory at [mem 0x918b5ae0-0x918b5b13]
[   22.439138] ACPI: Reserving DBG2 table memory at [mem 0x918b5b18-0x918b5b6b]
[   22.440985] Reserving 256MB of low memory at 2064MB for crashkernel (low RAM limit: 4096MB)
[   22.442798] Reserving 1536MB of memory at 65440MB for crashkernel (System RAM: 65397MB)
[   22.444872] Zone ranges:
[   22.445777]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[   22.446688]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[   22.447600]   Normal   [mem 0x0000000100000000-0x000000105effffff]
[   22.448512] Movable zone start for each node
[   22.449418] Early memory node ranges
[   22.450325]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[   22.451236]   node   0: [mem 0x0000000000100000-0x000000009187afff]
[   22.452148]   node   0: [mem 0x00000000918b6000-0x0000000091c69fff]
[   22.453058]   node   0: [mem 0x0000000091c6c000-0x00000000984ecfff]
[   22.453970]   node   0: [mem 0x0000000099de7000-0x0000000099ee6fff]
[   22.454881]   node   0: [mem 0x000000009afa1000-0x000000009affefff]
[   22.455792]   node   0: [mem 0x0000000100000000-0x000000105effffff]
[   22.456706] mminit::pageflags_layout_widths Section 0 Node 0 Zone 2 Lastcpupid 0 Kasantag 0 Gen 0 Tier 0 Flags 25
[   22.458523] mminit::pageflags_layout_shifts Section 19 Node 0 Zone 2 Lastcpupid 0 Kasantag 0
[   22.460337] mminit::pageflags_layout_pgshifts Section 0 Node 0 Zone 62 Lastcpupid 0 Kasantag 0
[   22.462381] mminit::pageflags_layout_nodezoneid Node/Zone ID: 64 -> 62
[   22.464191] mminit::pageflags_layout_usage location: 64 -> 62 layout 62 -> 25 unused 25 -> 0 page-flags
[   22.466006] Initmem setup node 0 [mem 0x0000000000001000-0x000000105effffff]
[   22.467818] mminit::memmap_init Initialising map node 0 zone 0 pfns 1 -> 4096
[   22.469628] mminit::memmap_init Initialising map node 0 zone 1 pfns 4096 -> 1048576
[   22.471441] mminit::memmap_init Initialising map node 0 zone 2 pfns 1048576 -> 17166336
[   22.473254] On node 0, zone DMA: 1 pages in unavailable ranges
[   22.473267] On node 0, zone DMA: 100 pages in unavailable ranges
[   22.476183] On node 0, zone DMA32: 59 pages in unavailable ranges
[   22.477185] On node 0, zone DMA32: 2 pages in unavailable ranges
[   22.478360] On node 0, zone DMA32: 6394 pages in unavailable ranges
[   22.479292] On node 0, zone DMA32: 4282 pages in unavailable ranges
[   22.480441] On node 0, zone Normal: 20481 pages in unavailable ranges
[   22.481372] On node 0, zone Normal: 4096 pages in unavailable ranges
[   22.483231] Reserving Intel graphics memory at [mem 0x9c000000-0x9fffffff]
[   22.490142] ACPI: PM-Timer IO Port: 0x1808
[   22.491053] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[   22.491963] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[   22.492874] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[   22.493785] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[   22.494927] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[   22.495838] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[   22.496748] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[   22.497659] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[   22.498568] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[   22.499479] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[   22.500389] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[   22.501300] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[   22.502246] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[   22.504057] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[   22.504969] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[   22.506781] ACPI: Using ACPI (MADT) for SMP configuration information
[   22.508591] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[   22.509501] TSC deadline timer available
[   22.510408] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[   22.511546] [mem 0xa0000000-0xdfffffff] available for PCI devices
[   22.512458] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[   22.520263] setup_percpu: NR_CPUS:64 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[   22.522385] percpu: Embedded 45 pages/cpu s144808 r8192 d31320 u262144
[   22.524199] pcpu-alloc: s144808 r8192 d31320 u262144 alloc=1*2097152
[   22.525112] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- 
[   22.526939] mminit::zonelist general 0:DMA = 0:DMA 
[   22.528081] mminit::zonelist general 0:DMA32 = 0:DMA32 0:DMA 
[   22.528992] mminit::zonelist general 0:Normal = 0:Normal 0:DMA32 0:DMA 
[   22.530804] Built 1 zonelists, mobility grouping on.  Total pages: 16480053
[   22.532614] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.2.6-gentoo-x86_64 root=UUID=ae174e75-7960-44f7-9ae0-3fcef5efae64 ro root_trim=yes rd.luks.allow-discards rd.luks.options=discard ipv6.disable=1 ipv6.disable_ipv6=1 ipv6.autoconf=0 loglevel=15 log_buf_len=16M ignore_loglevel printk.always_kmsg_dump=y printk.time=y printk.devkmsg=on fbcon=scrollback:4096k fbcon=font:ProFont6x11 net.ifnames=0 nolvm dobtrfs gk.log.keep=true console=tty1 earlyprintk=vga audit=0 systemd.log_target=kmsg systemd.journald.forward_to_console=1 enforcing=0 udev.children-max=1256 rd.udev.children-max=1256 nohz=on oops=panic crashkernel=1536M panic=0 print_fatal_signals=1 psi=1 sysrq_always_enabled random.trust_cpu=off logo.nologo lpj=0 mce=bootlog reboot=force,cold noexec=on nohibernate scsi_mod.use_blk_mq=1 consoleblank=120 mitigations=off nospectre_v1 nospectre_v2 spectre_v2=off nospec_store_bypass_disable kvm-intel.vmentry_l1d_flush=never l1tf=off nopti pti=off no_stf_barrier noibrs noibpb ssbd=force-off srbds=off spectre_v2_user=off noretpoline mds=off pnp.debug=1 rd.log=all noefi cpuidle.governor=menu zram.num_devices=4 zswap.enabled=0 zswap.same_filled_pages_enabled=1 zswap.compressor=zstd zswap.max_pool_percent=40 zswap.zpool=z3fold vsyscall=none apparmor=0 acpi_force_table_verification systemd.mask=dhcpcd@ page_owner=on debug_pagealloc=on page_poison=1 init_on_free=0 init_on_alloc=0 page_table_check=on numa_balancing=disable numa=off i915.enable_fbc=1 i915.verbose_state_checks=1 i915.enable_hangcheck=1 i915.error_capture=1 nvme.poll_queues=6 enable_mtrr_cleanup delayacct mminit_loglevel=4 memory_corruption_check_period=60 memory_corruption_check=1 memory_corruption_check_size=600K randomize_kstack_offset=on memtest=3
[   22.532776] Ignoring scrollback size option
[   22.533760] audit: disabled (until reboot)
[   22.534803] sysrq: sysrq always enabled.
[   22.536153] Setting dangerous option i915.enable_fbc - tainting kernel
[   22.537972] Setting dangerous option i915.enable_hangcheck - tainting kernel
[   22.539898] Unknown kernel command line parameters "nolvm dobtrfs nohibernate nospectre_v2 nospec_store_bypass_disable nopti no_stf_barrier noibrs noibpb noretpoline noefi BOOT_IMAGE=/boot/vmlinuz-6.2.6-gentoo-x86_64 root_trim=yes enforcing=0 noexec=on spectre_v2=off pti=off ssbd=force-off spectre_v2_user=off apparmor=0 page_owner=on debug_pagealloc=on numa_balancing=disable numa=off", will be passed to user space.
[   22.548935] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[   22.552410] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[   22.554497] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[   22.556308] software IO TLB: area num 16.
[   22.690584] Memory: 2281520K/66967204K available (22528K kernel code, 8152K rwdata, 9688K rodata, 1512K init, 4612K bss, 3197408K reserved, 0K cma-reserved)
[   22.694340] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[   22.697201] rcu: Hierarchical RCU implementation.
[   22.698109] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=12.
[   22.699920] 	Tracing variant of Tasks RCU enabled.
[   22.700827] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[   22.702639] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[   22.704475] NR_IRQS: 4352, nr_irqs: 2152, preallocated irqs: 16
[   22.705596] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[   22.707591] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[   22.711624] Console: colour VGA+ 80x25
[   22.712532] printk: console [tty1] enabled
[   22.713551] printk: bootconsole [earlyvga0] disabled
[   22.714572] ------------------------
[   22.714682] | Locking API testsuite:
[   22.714782] ----------------------------------------------------------------------------
[   22.714887]                                  | spin |wlock |rlock |mutex | wsem | rsem |rtmutex
[   22.715016]   --------------------------------------------------------------------------
[   22.715157]                      A-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[   22.715305]                  A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[   22.715449]              A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[   22.715593]              A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[   22.715738]          A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[   22.715882]          A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[   22.716027]          A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
[   22.716172]                     double unlock:failed|failed|failed|failed|failed|failed|  ok  |
[   22.716316]                   initialize held:failed|failed|failed|failed|failed|failed|failed|
[   22.716460]   --------------------------------------------------------------------------
[   22.716601]               recursive read-lock:             |  ok  |             |failed|
[   22.716743]            recursive read-lock #2:             |  ok  |             |failed|
[   22.716885]             mixed read-write-lock:             |failed|             |failed|
[   22.717027]             mixed write-read-lock:             |failed|             |failed|
[   22.717169]   mixed read-lock/lock-write ABBA:             |failed|             |failed|
[   22.717170]    mixed read-lock/lock-read ABBA:             |  ok  |             |failed|
[   22.717312]  mixed write-lock/lock-write ABBA:             |failed|             |failed|
[   22.717453]   chain cached mixed R-L/L-W ABBA:             |failed|
[   22.717594]          rlock W1R2/W2R3/W3R1/123:             |failed|
[   22.717843]          rlock W1R2/W2R3/W3R1/132:             |failed|
[   22.717968]          rlock W1R2/W2R3/W3R1/213:             |failed|
[   22.718093]          rlock W1R2/W2R3/W3R1/231:             |failed|
[   22.718218]          rlock W1R2/W2R3/W3R1/312:             |failed|
[   22.718343]          rlock W1R2/W2R3/W3R1/321:             |failed|
[   22.718468]          rlock W1W2/R2R3/W3R1/123:             |failed|
[   22.718593]          rlock W1W2/R2R3/W3R1/132:             |failed|
[   22.718718]          rlock W1W2/R2R3/W3R1/213:             |failed|
[   22.718844]          rlock W1W2/R2R3/W3R1/231:             |failed|
[   22.718969]          rlock W1W2/R2R3/W3R1/312:             |failed|
[   22.719094]          rlock W1W2/R2R3/W3R1/321:             |failed|
[   22.719218]          rlock W1W2/R2R3/R3W1/123:             |  ok  |
[   22.719344]          rlock W1W2/R2R3/R3W1/132:             |  ok  |
[   22.719469]          rlock W1W2/R2R3/R3W1/213:             |  ok  |
[   22.719595]          rlock W1W2/R2R3/R3W1/231:             |  ok  |
[   22.719720]          rlock W1W2/R2R3/R3W1/312:             |  ok  |
[   22.719845]          rlock W1W2/R2R3/R3W1/321:             |  ok  |
[   22.719970]          rlock W1R2/R2R3/W3W1/123:             |  ok  |
[   22.720095]          rlock W1R2/R2R3/W3W1/132:             |  ok  |
[   22.720220]          rlock W1R2/R2R3/W3W1/213:             |  ok  |
[   22.720344]          rlock W1R2/R2R3/W3W1/231:             |  ok  |
[   22.720470]          rlock W1R2/R2R3/W3W1/312:             |  ok  |
[   22.720594]          rlock W1R2/R2R3/W3W1/321:             |  ok  |
[   22.720719]   --------------------------------------------------------------------------
[   22.720860]      hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[   22.720986]      soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[   22.721112]      hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[   22.721237]      soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[   22.721362]        sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
[   22.721488]        sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
[   22.721613]          hard-safe-A + irqs-on/12:failed|failed|  ok  |
[   22.721739]          soft-safe-A + irqs-on/12:failed|failed|  ok  |
[   22.721865]          hard-safe-A + irqs-on/21:failed|failed|  ok  |
[   22.721991]          soft-safe-A + irqs-on/21:failed|failed|  ok  |
[   22.722117]     hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[   22.722242]     soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[   22.722368]     hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[   22.722494]     soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[   22.722619]     hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[   22.722745]     soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[   22.722870]     hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[   22.722996]     soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[   22.723122]     hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[   22.723247]     soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[   22.723372]     hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[   22.723498]     soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[   22.723624]     hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[   22.723750]     soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[   22.723876]     hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[   22.724002]     soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[   22.724127]     hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[   22.724252]     soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[   22.724378]     hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[   22.724503]     soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[   22.724628]     hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[   22.724754]     soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[   22.724880]     hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[   22.725005]     soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[   22.725131]       hard-irq lock-inversion/123:failed|failed|  ok  |
[   22.725256]       soft-irq lock-inversion/123:failed|failed|  ok  |
[   22.725382]       hard-irq lock-inversion/132:failed|failed|  ok  |
[   22.725507]       soft-irq lock-inversion/132:failed|failed|  ok  |
[   22.725633]       hard-irq lock-inversion/213:failed|failed|  ok  |
[   22.725758]       soft-irq lock-inversion/213:failed|failed|  ok  |
[   22.725883]       hard-irq lock-inversion/231:failed|failed|  ok  |
[   22.726009]       soft-irq lock-inversion/231:failed|failed|  ok  |
[   22.726134]       hard-irq lock-inversion/312:failed|failed|  ok  |
[   22.726260]       soft-irq lock-inversion/312:failed|failed|  ok  |
[   22.726385]       hard-irq lock-inversion/321:failed|failed|  ok  |
[   22.726510]       soft-irq lock-inversion/321:failed|failed|  ok  |
[   22.726635]       hard-irq read-recursion/123:      |failed|  ok  |
[   22.726761]       soft-irq read-recursion/123:      |failed|  ok  |
[   22.726887]       hard-irq read-recursion/132:      |failed|  ok  |
[   22.727013]       soft-irq read-recursion/132:      |failed|  ok  |
[   22.727139]       hard-irq read-recursion/213:      |failed|  ok  |
[   22.727264]       soft-irq read-recursion/213:      |failed|  ok  |
[   22.727624]       hard-irq read-recursion/231:      |failed|  ok  |
[   22.727749]       soft-irq read-recursion/231:      |failed|  ok  |
[   22.727875]       hard-irq read-recursion/312:      |failed|  ok  |
[   22.728000]       soft-irq read-recursion/312:      |failed|  ok  |
[   22.728126]       hard-irq read-recursion/321:      |failed|  ok  |
[   22.728252]       soft-irq read-recursion/321:      |failed|  ok  |
[   22.728376]    hard-irq read-recursion #2/123:      |failed|  ok  |
[   22.728501]    soft-irq read-recursion #2/123:      |failed|  ok  |
[   22.728627]    hard-irq read-recursion #2/132:      |failed|  ok  |
[   22.728753]    soft-irq read-recursion #2/132:      |failed|  ok  |
[   22.728879]    hard-irq read-recursion #2/213:      |failed|  ok  |
[   22.729005]    soft-irq read-recursion #2/213:      |failed|  ok  |
[   22.729130]    hard-irq read-recursion #2/231:      |failed|  ok  |
[   22.729255]    soft-irq read-recursion #2/231:      |failed|  ok  |
[   22.729380]    hard-irq read-recursion #2/312:      |failed|  ok  |
[   22.729504]    soft-irq read-recursion #2/312:      |failed|  ok  |
[   22.729629]    hard-irq read-recursion #2/321:      |failed|  ok  |
[   22.729754]    soft-irq read-recursion #2/321:      |failed|  ok  |
[   22.729880]    hard-irq read-recursion #3/123:      |failed|  ok  |
[   22.730005]    soft-irq read-recursion #3/123:      |failed|  ok  |
[   22.730131]    hard-irq read-recursion #3/132:      |failed|  ok  |
[   22.730256]    soft-irq read-recursion #3/132:      |failed|  ok  |
[   22.730382]    hard-irq read-recursion #3/213:      |failed|  ok  |
[   22.730507]    soft-irq read-recursion #3/213:      |failed|  ok  |
[   22.730633]    hard-irq read-recursion #3/231:      |failed|  ok  |
[   22.730758]    soft-irq read-recursion #3/231:      |failed|  ok  |
[   22.730884]    hard-irq read-recursion #3/312:      |failed|  ok  |
[   22.731010]    soft-irq read-recursion #3/312:      |failed|  ok  |
[   22.731135]    hard-irq read-recursion #3/321:      |failed|  ok  |
[   22.731260]    soft-irq read-recursion #3/321:      |failed|  ok  |
[   22.731385]   --------------------------------------------------------------------------
[   22.731525]   | Wound/wait tests |
[   22.731644]   ---------------------
[   22.731764]                   ww api failures:  ok  |  ok  |failed|
[   22.731891]                ww contexts mixing:failed|failed|
[   22.732016]              finishing ww context:failed|failed|failed|failed|
[   22.732155]                locking mismatches:failed|failed|failed|
[   22.732281]                  EDEADLK handling:  ok  |  ok  |failed|failed|failed|failed|failed|failed|failed|failed|
[   22.732434]            spinlock nest unlocked:failed|
[   22.732556]                spinlock nest test:  ok  |
[   22.732679]   -----------------------------------------------------
[   22.732803]                                  |block | try  |context|
[   22.732927]   -----------------------------------------------------
[   22.733052]                           context:failed|  ok  |  ok  |
[   22.733178]                               try:failed|  ok  |failed|
[   22.733304]                             block:failed|  ok  |failed|
[   22.733430]                          spinlock:failed|  ok  |failed|
[   22.733555]   --------------------------------------------------------------------------
[   22.733696]   | queued read lock tests |
[   22.733817]   ---------------------------
[   22.733937]       hardirq read-lock/lock-read:failed|
[   22.734059]       hardirq lock-read/read-lock:  ok  |
[   22.734181]                 hardirq inversion:failed|
[   22.734304]   --------------------
[   22.734423]   | fs_reclaim tests |
[   22.734542]   --------------------
[   22.734661]                   correct nesting:  ok  |
[   22.734783]                     wrong nesting:failed|
[   22.734899]                 protected nesting:  ok  |
[   22.735021]   --------------------------------------------------------------------------
[   22.735681]   | local_lock tests |
[   22.735800]   ---------------------
[   22.735919]           local_lock inversion  2:  ok  |
[   22.736042]           local_lock inversion 3A:  ok  |
[   22.736165]           local_lock inversion 3B:failed|
[   22.736288]       hardirq_unsafe_softirq_safe:failed|
[   22.736411] --------------------------------------------------------
[   22.736536] 238 out of 358 testcases failed, as expected. |
[   22.736660] ----------------------------------------------------
[   22.736789] ACPI: Core revision 20221020
[   22.736995] hpet: HPET dysfunctional in PC10. Force disabled.
[   22.737130] APIC: Switch to symmetric I/O mode setup
[   22.738453] x2apic: IRQ remapping doesn't support X2APIC mode
[   22.738846] Switched APIC routing to physical flat.
[   22.742878] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns
[   22.743030] Calibrating delay loop (skipped), value calculated using timer frequency.. 7402.02 BogoMIPS (lpj=12332833)
[   22.743177] pid_max: default: 32768 minimum: 301
[   22.743475] LSM: initializing lsm=capability
[   22.743632] Stack Depot allocating hash table of 262144 entries with kvcalloc
[   22.744484] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[   22.744765] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[   22.745292] x86/cpu: VMX (outside TXT) disabled by BIOS
[   22.745429] CPU0: Thermal monitoring enabled (TM1)
[   22.745590] process: using mwait in idle threads
[   22.745722] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[   22.745845] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[   22.745973] Spectre V2 : User space: Vulnerable
[   22.746099] Speculative Store Bypass: Vulnerable
[   22.746223] SRBDS: Vulnerable
[   22.746362] Freeing SMP alternatives memory: 56K
[   22.746362] smpboot: CPU0: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[   22.746362] cblist_init_generic: Setting adjustable number of callback queues.
[   22.746362] cblist_init_generic: Setting shift to 4 and lim to 1.
[   22.746362] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[   22.746362] ... version:                4
[   22.746362] ... bit width:              48
[   22.746362] ... generic registers:      4
[   22.746362] ... value mask:             0000ffffffffffff
[   22.746362] ... max period:             00007fffffffffff
[   22.746362] ... fixed-purpose events:   3
[   22.746362] ... event mask:             000000070000000f
[   22.746362] Estimated ratio of average max frequency by base frequency (times 1024): 1300
[   22.746362] rcu: Hierarchical SRCU implementation.
[   22.746362] rcu: 	Max phase no-delay instances is 1000.
[   22.746362] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[   22.746362] smp: Bringing up secondary CPUs ...
[   22.746362] x86: Booting SMP configuration:
[   22.746362] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[   22.760236] smp: Brought up 1 node, 12 CPUs
[   22.760236] CPUunderclocking: activating(?)=0 {apply_underclocking_if_needed kernel/smp.c:1502}
[   22.760236] CPUunderclocking: done. {apply_underclocking_if_needed kernel/smp.c:1525}
[   22.760268] smpboot: Max logical packages: 1
[   22.760389] ----------------
[   22.760507] | NMI testsuite:
[   22.760625] --------------------
[   22.760743]   remote IPI:  ok  |
[   22.761671]    local IPI:  ok  |
[   22.761793] --------------------
[   22.761906] Good, all   2 testcases passed! |
[   22.762027] ---------------------------------
[   22.763031] smpboot: Total of 12 processors activated (88831.24 BogoMIPS)
[   24.377438] node 0 deferred pages initialised in 1614ms
[   24.405404] allocated 268435456 bytes of page_ext
[   24.405696] devtmpfs: initialized
[   24.407003] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[   24.407180] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[   24.407380] prandom: seed boundary self test passed
[   24.407681] prandom: 100 self tests passed
[   24.407812] pinctrl core: initialized pinctrl subsystem
[   24.407963] regulator-dummy: no parameters, enabled
[   24.408203] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[   24.409046] i2c-core: driver [dummy] registered
[   24.409187] thermal_sys: Registered thermal governor 'fair_share'
[   24.409188] thermal_sys: Registered thermal governor 'bang_bang'
[   24.409323] thermal_sys: Registered thermal governor 'step_wise'
[   24.409697] thermal_sys: Registered thermal governor 'user_space'
[   24.409827] cpuidle: using governor ladder
[   24.410078] cpuidle: using governor menu
[   24.410817] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[   24.410817] dca service started, version 1.12.1
[   24.410817] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[   24.410817] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as E820 entry
[   24.410817] PCI: Using configuration type 1 for base access
[   24.411272] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[   24.411411] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[   24.411411] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[   24.413031] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[   24.413169] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[   24.413315] cryptd: max_cpu_qlen set to 1000
[   24.469696] raid6: avx2x4   gen() 42880 MB/s
[   24.526363] raid6: avx2x2   gen() 42588 MB/s
[   24.583029] raid6: avx2x1   gen() 34733 MB/s
[   24.583162] raid6: using algorithm avx2x4 gen() 42880 MB/s
[   24.639696] raid6: .... xor() 17601 MB/s, rmw enabled
[   24.639829] raid6: using avx2x2 recovery algorithm
[   24.640023] ACPI: Added _OSI(Module Device)
[   24.640154] ACPI: Added _OSI(Processor Device)
[   24.640276] ACPI: Added _OSI(3.0 _SCP Extensions)
[   24.640398] ACPI: Added _OSI(Processor Aggregator Device)
[   24.672506] ACPI: 11 ACPI AML tables successfully acquired and loaded
[   24.676536] ACPI: Dynamic OEM Table Load:
[   24.676674] ACPI: SSDT 0xFFFF8EBD15432800 00077A (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[   24.677400] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[   24.678421] ACPI: Dynamic OEM Table Load:
[   24.678556] ACPI: SSDT 0xFFFF8EBD1543D800 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[   24.679416] ACPI: Dynamic OEM Table Load:
[   24.679551] ACPI: SSDT 0xFFFF8EB180083000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160422)
[   24.680575] ACPI: Dynamic OEM Table Load:
[   24.680709] ACPI: SSDT 0xFFFF8EBD15438C00 000317 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[   24.681395] ACPI: Dynamic OEM Table Load:
[   24.681530] ACPI: SSDT 0xFFFF8EBD1543FC00 00030A (v02 PmRef  ApCst    00003000 INTL 20160422)
[   24.684617] ACPI: EC: EC started
[   24.684747] ACPI: EC: interrupt blocked
[   24.684875] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[   24.684998] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[   24.685138] ACPI: Interpreter enabled
[   24.685265] ACPI: PM: (supports S0 S5)
[   24.685384] ACPI: Using IOAPIC for interrupt routing
[   24.685525] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[   24.685678] PCI: Using E820 reservations for host bridge windows
[   24.686493] ACPI: Enabled 7 GPEs in block 00 to 7F
[   24.688699] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource
[   24.689063] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource
[   24.689409] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource
[   24.706300] ACPI: \_TZ_.FN00: New power resource
[   24.706417] ACPI: \_TZ_.FN01: New power resource
[   24.706589] ACPI: \_TZ_.FN02: New power resource
[   24.706760] ACPI: \_TZ_.FN03: New power resource
[   24.706929] ACPI: \_TZ_.FN04: New power resource
[   24.707976] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[   24.708116] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[   24.709363] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[   24.710383] PCI host bridge to bus 0000:00
[   24.710515] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[   24.710655] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[   24.710794] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[   24.710935] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[   24.711075] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x2fffffffff window]
[   24.711216] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[   24.711356] pci_bus 0000:00: root bus resource [bus 00-fe]
[   24.711484] pci_bus 0000:00: scanning bus
[   24.711677] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[   24.711851] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[   24.713060] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[   24.713197] pci 0000:00:01.0: PME# disabled
[   24.713407] pci 0000:00:01.0: EDR: Notify handler installed
[   24.713677] pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000
[   24.713818] pci 0000:00:02.0: reg 0x10: [mem 0x2ffe000000-0x2ffeffffff 64bit]
[   24.713961] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[   24.714102] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[   24.714237] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[   24.714420] pci 0000:00:02.0: EDR: Notify handler installed
[   24.714691] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
[   24.714843] pci 0000:00:14.0: reg 0x10: [mem 0x2fff010000-0x2fff01ffff 64bit]
[   24.715080] pci 0000:00:14.0: PME# supported from D3hot D3cold
[   24.715209] pci 0000:00:14.0: PME# disabled
[   24.715502] pci 0000:00:14.0: EDR: Notify handler installed
[   24.716022] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
[   24.716171] pci 0000:00:16.0: reg 0x10: [mem 0x2fff025000-0x2fff025fff 64bit]
[   24.716393] pci 0000:00:16.0: PME# supported from D3hot
[   24.716518] pci 0000:00:16.0: PME# disabled
[   24.716744] pci 0000:00:16.0: EDR: Notify handler installed
[   24.717125] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
[   24.717270] pci 0000:00:17.0: reg 0x10: [mem 0xdf324000-0xdf325fff]
[   24.717406] pci 0000:00:17.0: reg 0x14: [mem 0xdf327000-0xdf3270ff]
[   24.717541] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[   24.717675] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[   24.717809] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[   24.717943] pci 0000:00:17.0: reg 0x24: [mem 0xdf326000-0xdf3267ff]
[   24.718126] pci 0000:00:17.0: PME# supported from D3hot
[   24.718252] pci 0000:00:17.0: PME# disabled
[   24.718429] pci 0000:00:17.0: EDR: Notify handler installed
[   24.718703] pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
[   24.718959] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[   24.719088] pci 0000:00:1b.0: PME# disabled
[   24.719322] pci 0000:00:1b.0: EDR: Notify handler installed
[   24.719722] pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
[   24.719979] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[   24.720109] pci 0000:00:1c.0: PME# disabled
[   24.720337] pci 0000:00:1c.0: EDR: Notify handler installed
[   24.720723] pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
[   24.720978] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[   24.721105] pci 0000:00:1c.4: PME# disabled
[   24.721345] pci 0000:00:1c.4: EDR: Notify handler installed
[   24.721734] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
[   24.721992] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[   24.722119] pci 0000:00:1d.0: PME# disabled
[   24.722363] pci 0000:00:1d.0: EDR: Notify handler installed
[   24.722768] pci 0000:00:1f.0: [8086:a2c9] type 00 class 0x060100
[   24.723039] pci 0000:00:1f.0: EDR: Notify handler installed
[   24.723295] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
[   24.723438] pci 0000:00:1f.2: reg 0x10: [mem 0xdf320000-0xdf323fff]
[   24.723683] pci 0000:00:1f.2: EDR: Notify handler installed
[   24.723939] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
[   24.724088] pci 0000:00:1f.3: reg 0x10: [mem 0x2fff020000-0x2fff023fff 64bit]
[   24.724265] pci 0000:00:1f.3: reg 0x20: [mem 0x2fff000000-0x2fff00ffff 64bit]
[   24.724458] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[   24.724585] pci 0000:00:1f.3: PME# disabled
[   24.724902] pci 0000:00:1f.3: EDR: Notify handler installed
[   24.725429] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
[   24.725611] pci 0000:00:1f.4: reg 0x10: [mem 0x2fff024000-0x2fff0240ff 64bit]
[   24.725821] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[   24.726070] pci 0000:00:1f.4: EDR: Notify handler installed
[   24.726326] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
[   24.726382] pci 0000:00:1f.6: reg 0x10: [mem 0xdf300000-0xdf31ffff]
[   24.726621] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[   24.726749] pci 0000:00:1f.6: PME# disabled
[   24.726930] pci 0000:00:1f.6: EDR: Notify handler installed
[   24.727165] pci_bus 0000:00: fixups for bus
[   24.727287] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 0
[   24.727444] pci_bus 0000:01: scanning bus
[   24.727595] pci 0000:01:00.0: [10de:1e89] type 00 class 0x030000
[   24.727746] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[   24.727895] pci 0000:01:00.0: reg 0x14: [mem 0x2fe0000000-0x2fefffffff 64bit pref]
[   24.728059] pci 0000:01:00.0: reg 0x1c: [mem 0x2ff0000000-0x2ff1ffffff 64bit pref]
[   24.728216] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[   24.728351] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[   24.728570] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[   24.728710] pci 0000:01:00.0: PME# disabled
[   24.728897] pci 0000:01:00.0: EDR: Notify handler installed
[   24.729107] pci 0000:01:00.1: [10de:10f8] type 00 class 0x040300
[   24.729261] pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
[   24.729585] pci 0000:01:00.2: [10de:1ad8] type 00 class 0x0c0330
[   24.729722] pci 0000:01:00.2: reg 0x10: [mem 0x2ff2000000-0x2ff203ffff 64bit pref]
[   24.729899] pci 0000:01:00.2: reg 0x1c: [mem 0x2ff2040000-0x2ff204ffff 64bit pref]
[   24.730137] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
[   24.730275] pci 0000:01:00.2: PME# disabled
[   24.730460] pci 0000:01:00.3: [10de:1ad9] type 00 class 0x0c8000
[   24.730615] pci 0000:01:00.3: reg 0x10: [mem 0xdf084000-0xdf084fff]
[   24.730871] pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
[   24.731009] pci 0000:01:00.3: PME# disabled
[   24.731214] pci_bus 0000:01: fixups for bus
[   24.731345] pci 0000:00:01.0: PCI bridge to [bus 01]
[   24.731469] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[   24.731595] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[   24.731734] pci 0000:00:01.0:   bridge window [mem 0x2fe0000000-0x2ff20fffff 64bit pref]
[   24.731875] pci_bus 0000:01: bus scan returning with max=01
[   24.732002] pci 0000:00:1b.0: scanning [bus 02-02] behind bridge, pass 0
[   24.732231] pci_bus 0000:02: scanning bus
[   24.732350] pci_bus 0000:02: fixups for bus
[   24.732471] pci 0000:00:1b.0: PCI bridge to [bus 02]
[   24.732608] pci_bus 0000:02: bus scan returning with max=02
[   24.732738] pci 0000:00:1c.0: scanning [bus 03-03] behind bridge, pass 0
[   24.732965] pci_bus 0000:03: scanning bus
[   24.733033] pci_bus 0000:03: fixups for bus
[   24.733155] pci 0000:00:1c.0: PCI bridge to [bus 03]
[   24.733291] pci_bus 0000:03: bus scan returning with max=03
[   24.733420] pci 0000:00:1c.4: scanning [bus 04-04] behind bridge, pass 0
[   24.733693] pci_bus 0000:04: scanning bus
[   24.733888] pci 0000:04:00.0: [1b21:2142] type 00 class 0x0c0330
[   24.734091] pci 0000:04:00.0: reg 0x10: [mem 0xdf200000-0xdf207fff 64bit]
[   24.734343] pci 0000:04:00.0: enabling Extended Tags
[   24.734604] pci 0000:04:00.0: PME# supported from D0
[   24.734781] pci 0000:04:00.0: PME# disabled
[   24.735044] pci 0000:04:00.0: EDR: Notify handler installed
[   24.735382] pci_bus 0000:04: fixups for bus
[   24.735492] pci 0000:00:1c.4: PCI bridge to [bus 04]
[   24.735610] pci 0000:00:1c.4:   bridge window [mem 0xdf200000-0xdf2fffff]
[   24.735745] pci_bus 0000:04: bus scan returning with max=04
[   24.735862] pci 0000:00:1d.0: scanning [bus 05-05] behind bridge, pass 0
[   24.736064] pci_bus 0000:05: scanning bus
[   24.736213] pci 0000:05:00.0: [8086:2522] type 00 class 0x010802
[   24.736358] pci 0000:05:00.0: reg 0x10: [mem 0xdf100000-0xdf103fff 64bit]
[   24.736429] pci 0000:05:00.0: enabling Extended Tags
[   24.736810] pci 0000:05:00.0: EDR: Notify handler installed
[   24.737078] pci_bus 0000:05: fixups for bus
[   24.737188] pci 0000:00:1d.0: PCI bridge to [bus 05]
[   24.737306] pci 0000:00:1d.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[   24.737440] pci_bus 0000:05: bus scan returning with max=05
[   24.737555] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 1
[   24.737688] pci 0000:00:1b.0: scanning [bus 02-02] behind bridge, pass 1
[   24.737826] pci 0000:00:1c.0: scanning [bus 03-03] behind bridge, pass 1
[   24.737964] pci 0000:00:1c.4: scanning [bus 04-04] behind bridge, pass 1
[   24.738099] pci 0000:00:1d.0: scanning [bus 05-05] behind bridge, pass 1
[   24.738233] pci_bus 0000:00: bus scan returning with max=05
[   24.738346] pci_bus 0000:00: on NUMA node 0
[   24.739412] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[   24.739560] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[   24.739707] ACPI: PCI: Interrupt link LNKC configured for IRQ 15
[   24.739852] ACPI: PCI: Interrupt link LNKD configured for IRQ 5
[   24.739996] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[   24.740110] ACPI: PCI: Interrupt link LNKE disabled
[   24.740253] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[   24.740367] ACPI: PCI: Interrupt link LNKF disabled
[   24.740510] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[   24.740624] ACPI: PCI: Interrupt link LNKG disabled
[   24.740766] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[   24.740880] ACPI: PCI: Interrupt link LNKH disabled
[   24.745268] ACPI: EC: interrupt unblocked
[   24.745379] ACPI: EC: event unblocked
[   24.745500] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[   24.745613] ACPI: EC: GPE=0x16
[   24.745721] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[   24.746363] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[   24.746518] i2c-core: driver [lp3972] registered
[   24.746632] i2c-core: driver [lp8755-regulator] registered
[   24.746756] iommu: Default domain type: Translated 
[   24.746756] iommu: DMA domain TLB invalidation policy: lazy mode 
[   24.746756] SCSI subsystem initialized
[   24.746756] libata version 3.00 loaded.
[   24.746756] ACPI: bus type USB registered
[   24.746756] usbcore: registered new interface driver usbfs
[   24.746756] usbcore: registered new interface driver hub
[   24.746837] usbcore: registered new device driver usb
[   24.746964] pps_core: LinuxPPS API ver. 1 registered
[   24.747076] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[   24.747213] EDAC MC: Ver: 3.0.0
[   24.747409] Advanced Linux Sound Architecture Driver Initialized.
[   24.747409] PCI: Using ACPI for IRQ routing
[   24.776460] PCI: pci_cache_line_size set to 64 bytes
[   24.776577] pci 0000:01:00.1: BAR 0: reserving [mem 0xdf080000-0xdf083fff flags 0x40200] (d=0, p=0)
[   24.776713] pci 0000:01:00.2: BAR 0: reserving [mem 0x2ff2000000-0x2ff203ffff flags 0x14220c] (d=0, p=0)
[   24.776846] pci 0000:01:00.2: BAR 3: reserving [mem 0x2ff2040000-0x2ff204ffff flags 0x14220c] (d=0, p=0)
[   24.776982] pci 0000:01:00.3: BAR 0: reserving [mem 0xdf084000-0xdf084fff flags 0x40200] (d=0, p=0)
[   24.777116] pci 0000:00:02.0: BAR 0: reserving [mem 0x2ffe000000-0x2ffeffffff flags 0x140204] (d=0, p=0)
[   24.777249] pci 0000:00:02.0: BAR 2: reserving [mem 0xc0000000-0xcfffffff flags 0x14220c] (d=0, p=0)
[   24.777382] pci 0000:00:02.0: BAR 4: reserving [io  0xf000-0xf03f flags 0x40101] (d=0, p=0)
[   24.777516] pci 0000:00:14.0: BAR 0: reserving [mem 0x2fff010000-0x2fff01ffff flags 0x140204] (d=0, p=0)
[   24.777653] pci 0000:00:17.0: BAR 0: reserving [mem 0xdf324000-0xdf325fff flags 0x40200] (d=0, p=0)
[   24.777785] pci 0000:00:17.0: BAR 1: reserving [mem 0xdf327000-0xdf3270ff flags 0x40200] (d=0, p=0)
[   24.777918] pci 0000:00:17.0: BAR 2: reserving [io  0xf090-0xf097 flags 0x40101] (d=0, p=0)
[   24.778049] pci 0000:00:17.0: BAR 3: reserving [io  0xf080-0xf083 flags 0x40101] (d=0, p=0)
[   24.778181] pci 0000:00:17.0: BAR 4: reserving [io  0xf060-0xf07f flags 0x40101] (d=0, p=0)
[   24.778312] pci 0000:00:17.0: BAR 5: reserving [mem 0xdf326000-0xdf3267ff flags 0x40200] (d=0, p=0)
[   24.778455] pci 0000:04:00.0: BAR 0: reserving [mem 0xdf200000-0xdf207fff flags 0x140204] (d=0, p=0)
[   24.779696] pci 0000:05:00.0: BAR 0: reserving [mem 0xdf100000-0xdf103fff flags 0x140204] (d=0, p=0)
[   24.779833] pci 0000:00:1f.2: BAR 0: reserving [mem 0xdf320000-0xdf323fff flags 0x40200] (d=0, p=0)
[   24.779967] pci 0000:00:1f.3: BAR 0: reserving [mem 0x2fff020000-0x2fff023fff flags 0x140204] (d=0, p=0)
[   24.780100] pci 0000:00:1f.3: BAR 4: reserving [mem 0x2fff000000-0x2fff00ffff flags 0x140204] (d=0, p=0)
[   24.780237] pci 0000:00:1f.4: BAR 0: reserving [mem 0x2fff024000-0x2fff0240ff flags 0x140204] (d=0, p=0)
[   24.780370] pci 0000:00:1f.4: BAR 4: reserving [io  0xf040-0xf05f flags 0x40101] (d=0, p=0)
[   24.780503] pci 0000:00:1f.6: BAR 0: reserving [mem 0xdf300000-0xdf31ffff flags 0x40200] (d=0, p=0)
[   24.780638] pci 0000:01:00.0: BAR 0: reserving [mem 0xde000000-0xdeffffff flags 0x40200] (d=1, p=1)
[   24.780772] pci 0000:01:00.0: BAR 1: reserving [mem 0x2fe0000000-0x2fefffffff flags 0x14220c] (d=1, p=1)
[   24.780905] pci 0000:01:00.0: BAR 3: reserving [mem 0x2ff0000000-0x2ff1ffffff flags 0x14220c] (d=1, p=1)
[   24.781039] pci 0000:01:00.0: BAR 5: reserving [io  0xe000-0xe07f flags 0x40101] (d=1, p=1)
[   24.781180] pci 0000:00:16.0: BAR 0: reserving [mem 0x2fff025000-0x2fff025fff flags 0x140204] (d=1, p=1)
[   24.781343] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[   24.781457] e820: reserve RAM buffer [mem 0x9187b000-0x93ffffff]
[   24.781572] e820: reserve RAM buffer [mem 0x91c6a000-0x93ffffff]
[   24.781686] e820: reserve RAM buffer [mem 0x984ed000-0x9bffffff]
[   24.781801] e820: reserve RAM buffer [mem 0x99ee7000-0x9bffffff]
[   24.781915] e820: reserve RAM buffer [mem 0x9afff000-0x9bffffff]
[   24.782029] e820: reserve RAM buffer [mem 0x105f000000-0x105fffffff]
[   24.782148] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[   24.782148] pci 0000:00:02.0: vgaarb: bridge control possible
[   24.782148] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[   24.782148] pci 0000:01:00.0: vgaarb: bridge control possible
[   24.782148] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[   24.782148] vgaarb: loaded
[   24.785570] microcode: CPU: sig=0x906ea, pf=0x2, rev=0xf0
[   24.785684] microcode: mc_saved[0]: sig=0x906ea, pf=0x22, rev=0xf0, total size=0x19800, date = 2021-11-15
[   24.785841] clocksource: Switched to clocksource tsc-early
[   24.786052] pnp: PnP ACPI init
[   24.786219] pnp 00:00: parse allocated resources
[   24.786219] pnp 00:00: PNP0c02: calling quirk_system_pci_resources+0x0/0x130
[   24.786219] pnp 00:00: PNP0c02: calling quirk_intel_mch+0x0/0x220
[   24.786219] system 00:00: [io  0x0290-0x029f] has been reserved
[   24.786219] pnp 00:01: parse allocated resources
[   24.786219] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x130
[   24.786219] pnp 00:01: PNP0c02: calling quirk_intel_mch+0x0/0x220
[   24.786219] system 00:01: [io  0x0680-0x069f] has been reserved
[   24.786219] system 00:01: [io  0xffff] has been reserved
[   24.786219] system 00:01: [io  0xffff] has been reserved
[   24.786219] system 00:01: [io  0xffff] has been reserved
[   24.786219] system 00:01: [io  0x1800-0x18fe] has been reserved
[   24.786219] system 00:01: [io  0x164e-0x164f] has been reserved
[   24.786219] pnp 00:02: parse allocated resources
[   24.786219] pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x130
[   24.786219] pnp 00:02: PNP0c02: calling quirk_intel_mch+0x0/0x220
[   24.786219] system 00:02: [io  0x0800-0x087f] has been reserved
[   24.786219] pnp 00:03: parse allocated resources
[   24.786219] pnp 00:04: parse allocated resources
[   24.786219] pnp 00:04: PNP0c02: calling quirk_system_pci_resources+0x0/0x130
[   24.786219] pnp 00:04: PNP0c02: calling quirk_intel_mch+0x0/0x220
[   24.786309] system 00:04: [io  0x1854-0x1857] has been reserved
[   24.786461] pnp 00:05: parse allocated resources
[   24.786658] pnp 00:05: PNP0c02: calling quirk_system_pci_resources+0x0/0x130
[   24.786794] pnp 00:05: PNP0c02: calling quirk_intel_mch+0x0/0x220
[   24.786922] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[   24.787051] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[   24.787180] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[   24.787308] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[   24.787436] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[   24.787564] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[   24.787692] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[   24.787820] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[   24.787948] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[   24.788078] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[   24.788210] pnp 00:06: parse allocated resources
[   24.788330] pnp 00:06: PNP0c02: calling quirk_system_pci_resources+0x0/0x130
[   24.788466] pnp 00:06: PNP0c02: calling quirk_intel_mch+0x0/0x220
[   24.788590] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[   24.788719] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[   24.788847] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
[   24.788975] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
[   24.789103] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
[   24.789234] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[   24.789362] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[   24.789491] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[   24.789621] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[   24.789752] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[   24.789883] pnp 00:07: parse allocated resources
[   24.790198] pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x130
[   24.790332] pnp 00:07: PNP0c02: calling quirk_intel_mch+0x0/0x220
[   24.790459] system 00:07: [io  0xfe00-0xfefe] has been reserved
[   24.790640] pnp 00:08: parse allocated resources
[   24.791456] pnp 00:08: PNP0c02: calling quirk_system_pci_resources+0x0/0x130
[   24.791590] pnp 00:08: PNP0c02: calling quirk_intel_mch+0x0/0x220
[   24.791715] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[   24.791844] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[   24.793716] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[   24.794426] pnp: PnP ACPI: found 9 devices
[   24.799864] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[   24.800065] NET: Registered PF_INET protocol family
[   24.800437] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[   24.802806] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
[   24.802987] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[   24.803447] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[   24.804034] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[   24.804347] TCP: Hash tables configured (established 524288 bind 65536)
[   24.804595] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[   24.804871] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[   24.805113] NET: Registered PF_UNIX/PF_LOCAL protocol family
[   24.805395] pci 0000:00:1b.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[   24.805528] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[   24.805667] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[   24.805803] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[   24.805933] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[   24.806071] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[   24.806210] pci 0000:00:1b.0: BAR 14: assigned [mem 0xa0000000-0xa01fffff]
[   24.806339] pci 0000:00:1b.0: BAR 15: assigned [mem 0x2000000000-0x20001fffff 64bit pref]
[   24.806474] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0200000-0xa03fffff]
[   24.806604] pci 0000:00:1c.0: BAR 15: assigned [mem 0x2000200000-0x20003fffff 64bit pref]
[   24.806735] pci 0000:00:1b.0: BAR 13: assigned [io  0x2000-0x2fff]
[   24.806850] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[   24.806965] pci 0000:00:01.0: PCI bridge to [bus 01]
[   24.807079] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[   24.807194] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[   24.807323] pci 0000:00:01.0:   bridge window [mem 0x2fe0000000-0x2ff20fffff 64bit pref]
[   24.807456] pci 0000:00:1b.0: PCI bridge to [bus 02]
[   24.807572] pci 0000:00:1b.0:   bridge window [io  0x2000-0x2fff]
[   24.807692] pci 0000:00:1b.0:   bridge window [mem 0xa0000000-0xa01fffff]
[   24.807826] pci 0000:00:1b.0:   bridge window [mem 0x2000000000-0x20001fffff 64bit pref]
[   24.807965] pci 0000:00:1c.0: PCI bridge to [bus 03]
[   24.808080] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[   24.808201] pci 0000:00:1c.0:   bridge window [mem 0xa0200000-0xa03fffff]
[   24.808335] pci 0000:00:1c.0:   bridge window [mem 0x2000200000-0x20003fffff 64bit pref]
[   24.808474] pci 0000:00:1c.4: PCI bridge to [bus 04]
[   24.808591] pci 0000:00:1c.4:   bridge window [mem 0xdf200000-0xdf2fffff]
[   24.808728] pci 0000:00:1d.0: PCI bridge to [bus 05]
[   24.808844] pci 0000:00:1d.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[   24.808981] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[   24.809096] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[   24.809211] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[   24.809339] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xdfffffff window]
[   24.809468] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x2fffffffff window]
[   24.809598] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window]
[   24.809728] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[   24.809842] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[   24.809956] pci_bus 0000:01: resource 2 [mem 0x2fe0000000-0x2ff20fffff 64bit pref]
[   24.810086] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[   24.810199] pci_bus 0000:02: resource 1 [mem 0xa0000000-0xa01fffff]
[   24.810313] pci_bus 0000:02: resource 2 [mem 0x2000000000-0x20001fffff 64bit pref]
[   24.810444] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[   24.810557] pci_bus 0000:03: resource 1 [mem 0xa0200000-0xa03fffff]
[   24.810672] pci_bus 0000:03: resource 2 [mem 0x2000200000-0x20003fffff 64bit pref]
[   24.810801] pci_bus 0000:04: resource 1 [mem 0xdf200000-0xdf2fffff]
[   24.810916] pci_bus 0000:05: resource 1 [mem 0xdf100000-0xdf1fffff]
[   24.811289] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[   24.811420] pci 0000:01:00.1: saving config space at offset 0x0 (reading 0x10f810de)
[   24.811553] pci 0000:01:00.1: saving config space at offset 0x4 (reading 0x100006)
[   24.811683] pci 0000:01:00.1: saving config space at offset 0x8 (reading 0x40300a1)
[   24.811816] pci 0000:01:00.1: saving config space at offset 0xc (reading 0x800010)
[   24.811947] pci 0000:01:00.1: saving config space at offset 0x10 (reading 0xdf080000)
[   24.812079] pci 0000:01:00.1: saving config space at offset 0x14 (reading 0x0)
[   24.812209] pci 0000:01:00.1: saving config space at offset 0x18 (reading 0x0)
[   24.812339] pci 0000:01:00.1: saving config space at offset 0x1c (reading 0x0)
[   24.812470] pci 0000:01:00.1: saving config space at offset 0x20 (reading 0x0)
[   24.812600] pci 0000:01:00.1: saving config space at offset 0x24 (reading 0x0)
[   24.812731] pci 0000:01:00.1: saving config space at offset 0x28 (reading 0x0)
[   24.812862] pci 0000:01:00.1: saving config space at offset 0x2c (reading 0x134d10de)
[   24.812993] pci 0000:01:00.1: saving config space at offset 0x30 (reading 0x0)
[   24.813127] pci 0000:01:00.1: saving config space at offset 0x34 (reading 0x60)
[   24.813147] pci 0000:01:00.2: D0 power state depends on 0000:01:00.0
[   24.813258] pci 0000:01:00.1: saving config space at offset 0x38 (reading 0x0)
[   24.813403] pci 0000:01:00.2: saving config space at offset 0x0 (reading 0x1ad810de)
[   24.813505] pci 0000:01:00.1: saving config space at offset 0x3c (reading 0x20a)
[   24.813636] pci 0000:01:00.2: saving config space at offset 0x4 (reading 0x100006)
[   24.813911] pci 0000:01:00.2: saving config space at offset 0x8 (reading 0xc0330a1)
[   24.814012] pci 0000:01:00.3: D0 power state depends on 0000:01:00.0
[   24.814072] pci 0000:01:00.2: saving config space at offset 0xc (reading 0x800010)
[   24.814194] pci 0000:04:00.0: PME# does not work under D0, disabling it
[   24.814318] pci 0000:01:00.2: saving config space at offset 0x10 (reading 0xf200000c)
[   24.814466] pci 0000:01:00.3: saving config space at offset 0x0 (reading 0x1ad910de)
[   24.814579] pci 0000:01:00.2: saving config space at offset 0x14 (reading 0x2f)
[   24.814709] pci 0000:01:00.3: saving config space at offset 0x4 (reading 0x100006)
[   24.814839] pci 0000:01:00.2: saving config space at offset 0x18 (reading 0x0)
[   24.814969] pci 0000:01:00.3: saving config space at offset 0x8 (reading 0xc8000a1)
[   24.815098] pci 0000:01:00.2: saving config space at offset 0x1c (reading 0xf204000c)
[   24.815229] pci 0000:01:00.3: saving config space at offset 0xc (reading 0x800010)
[   24.815360] pci 0000:01:00.2: saving config space at offset 0x20 (reading 0x2f)
[   24.815489] pci 0000:01:00.3: saving config space at offset 0x10 (reading 0xdf084000)
[   24.815619] pci 0000:01:00.2: saving config space at offset 0x24 (reading 0x0)
[   24.815749] pci 0000:01:00.3: saving config space at offset 0x14 (reading 0x0)
[   24.815878] pci 0000:01:00.2: saving config space at offset 0x28 (reading 0x0)
[   24.816008] pci 0000:01:00.3: saving config space at offset 0x18 (reading 0x0)
[   24.816138] pci 0000:01:00.2: saving config space at offset 0x2c (reading 0x134d10de)
[   24.816267] pci 0000:01:00.3: saving config space at offset 0x1c (reading 0x0)
[   24.816401] pci 0000:01:00.2: saving config space at offset 0x30 (reading 0x0)
[   24.816532] pci 0000:01:00.3: saving config space at offset 0x20 (reading 0x0)
[   24.816632] PCI: CLS 64 bytes, default 64
[   24.816638] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   24.816638] software IO TLB: mapped [mem 0x00000000944ed000-0x00000000984ed000] (64MB)
[   24.816674] Unpacking initramfs...
[   24.816688] pci 0000:01:00.2: saving config space at offset 0x34 (reading 0x68)
[   24.816818] pci 0000:01:00.3: saving config space at offset 0x24 (reading 0x0)
[   24.816929] pci 0000:01:00.2: saving config space at offset 0x38 (reading 0x0)
[   24.817045] pci 0000:01:00.3: saving config space at offset 0x28 (reading 0x0)
[   24.817176] pci 0000:01:00.2: saving config space at offset 0x3c (reading 0x30f)
[   24.817285] pci 0000:01:00.3: saving config space at offset 0x2c (reading 0x134d10de)
[   24.819840] pci 0000:01:00.3: saving config space at offset 0x30 (reading 0x0)
[   24.819971] pci 0000:01:00.3: saving config space at offset 0x34 (reading 0x68)
[   24.820102] pci 0000:01:00.3: saving config space at offset 0x38 (reading 0x0)
[   24.820233] pci 0000:01:00.3: saving config space at offset 0x3c (reading 0x405)
[   24.826409] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   24.826542] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   24.826655] RAPL PMU: hw unit of domain package 2^-14 Joules
[   24.826768] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   24.826881] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   24.827017] skl_uncore 0000:00:00.0: vgaarb: pci_notify
[   24.827131] skl_uncore 0000:00:00.0: runtime IRQ mapping not provided by arch
[   24.827270] skl_uncore 0000:00:00.0: vgaarb: pci_notify
[   24.827626] check: Scanning for low memory corruption every 60 seconds
[   24.827941] clocksource_wdtest: --- holdoff=10
[   24.828213] Initialise system trusted keyrings
[   24.828333] Key type blacklist registered
[   24.828463] workingset: timestamp_bits=46 max_order=24 bucket_order=0
[   24.828584] zbud: loaded
[   24.828846] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   24.828997] fuse: init (API version 7.38)
[   24.835462] xor: automatically using best checksumming function   avx       
[   24.835596] async_tx: api initialized (async)
[   24.835707] Key type asymmetric registered
[   24.835817] Asymmetric key parser 'x509' registered
[   24.835928] Running certificate verification selftests
[   25.123517] Freeing initrd memory: 17156K
[   25.178167] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'
[   25.178707] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[   25.178858] io scheduler mq-deadline registered
[   25.178970] io scheduler kyber registered
[   25.179090] io scheduler bfq registered
[   25.179201] test_string_helpers: Running tests...
[   25.181876] test_hexdump: all 1184 tests passed
[   25.181988] 
               Start testing find_bit() with random-filled bitmap
[   25.182969] find_next_bit:                  693803 ns, 164108 iterations
[   25.183820] find_next_zero_bit:             721212 ns, 163573 iterations
[   25.184553] find_last_bit:                  604739 ns, 164108 iterations
[   25.191738] find_nth_bit:                  7057093 ns,  16421 iterations
[   25.193440] find_first_bit:                1573073 ns,  16422 iterations
[   25.234581] find_first_and_bit:           41010715 ns,  32827 iterations
[   25.235057] find_next_and_bit:              348574 ns,  73699 iterations
[   25.235186] 
               Start testing find_bit() with sparse bitmap
[   25.237156] find_next_bit:                    9547 ns,    653 iterations
[   25.238661] find_next_zero_bit:            1377484 ns, 327028 iterations
[   25.238799] find_last_bit:                    9689 ns,    653 iterations
[   25.241191] find_nth_bit:                  2258922 ns,    652 iterations
[   25.241892] find_first_bit:                 572914 ns,    653 iterations
[   25.242025] find_first_and_bit:               4180 ns,      1 iterations
[   25.242155] find_next_and_bit:                2822 ns,      1 iterations
[   25.249465] IDA: 147353 of 147353 tests passed
[   25.249712] min_heap_test: test passed
[   25.249919] Running rhashtable test nelem=8, max_size=0, shrinking=0
[   25.250034] Test 00:
[   25.250168]   Adding 50000 keys
[   25.257113]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   25.259837]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   25.259969]   Deleting 50000 keys
[   25.262604]   Duration of test: 12327236 ns
[   25.262739] Test 01:
[   25.262870]   Adding 50000 keys
[   25.269485]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   25.272131]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   25.272263]   Deleting 50000 keys
[   25.274863]   Duration of test: 11883632 ns
[   25.275003] Test 02:
[   25.275151]   Adding 50000 keys
[   25.282044]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   25.284744]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   25.284876]   Deleting 50000 keys
[   25.287528]   Duration of test: 12268119 ns
[   25.287668] Test 03:
[   25.287806]   Adding 50000 keys
[   25.294732]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   25.297436]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   25.297567]   Deleting 50000 keys
[   25.300201]   Duration of test: 12287091 ns
[   25.301526] test if its possible to exceed max_size 8192: no, ok
[   25.301675] Average test time: 12191519
[   25.301785] test inserting duplicates
[   25.301898] 
               ---- ht: ----
               bucket[1] -> [[ val 21 (tid=1) ]] -> [[ val 1 (tid=0) ]]
               -------------
[   25.302069] 
               ---- ht: ----
               bucket[1] -> [[ val 21 (tid=1) ]] -> [[ val 1 (tid=2),  val 1 (tid=0) ]]
               -------------
[   25.302254] 
               ---- ht: ----
               bucket[1] -> [[ val 21 (tid=1) ]] -> [[ val 1 (tid=0) ]]
               -------------
[   25.302425] 
               ---- ht: ----
               bucket[1] -> [[ val 21 (tid=1) ]] -> [[ val 1 (tid=2),  val 1 (tid=0) ]]
               -------------
[   25.302606] Testing concurrent rhashtable access from 10 threads
[   25.395538] test 3125 add/delete pairs into rhlist
[   25.413651] test 3125 random rhlist add/delete operations
[   25.440948] Started 10 threads, 0 failed, rhltable test returns 0
[   25.441063] test_printf: loaded.
[   25.441223] test_printf: crng possibly not yet initialized. plain 'p' buffer contains "(____ptrval____)"
[   25.441223] test_printf: crng possibly not yet initialized. plain 'p' buffer contains "(____ptrval____)"
[   25.441370] test_printf: crng possibly not yet initialized. plain 'p' buffer contains "(____ptrval____)"
[   25.441661] test_printf: crng possibly not yet initialized. plain 'p' buffer contains "(____ptrval____)"
[   25.441843] test_printf: all 416 tests passed
[   25.442086] test_scanf: loaded.
[   25.443211] test_scanf: all 2545 tests passed
[   25.443323] test_bitmap: loaded.
[   25.443502] test_bitmap: parselist: 14: input is '0-2047:128/256' OK, Time: 189
[   25.443638] test_bitmap: bitmap_print_to_pagebuf: input is '0-32767
               ', Time: 546
[   25.445009] test_bitmap: all 6550 tests passed
[   25.445122] test_uuid: all 18 tests passed
[   25.445238] test_memcat_p: test passed
[   25.448845] test_meminit: test_pages failed 10 out of 10 times
[   25.450786] test_meminit: test_kvmalloc failed 40 out of 40 times
[   25.460869] test_meminit: test_kmemcache failed 20 out of 70 times
[   25.461072] test_meminit: all 10 tests in test_rcu_persistent passed
[   25.461187] test_meminit: failures: 70 out of 130
[   25.461319] reference already released.
[   25.461429] allocated in:
[   25.461536]  test_ref_tracker_init+0xa6/0x1e0
[   25.461650]  do_one_initcall+0xb1/0x210
[   25.461762]  kernel_init_freeable+0x197/0x250
[   25.461874]  kernel_init+0x11/0x1d0
[   25.461985]  ret_from_fork+0x1f/0x30
[   25.462095] freed in:
[   25.462202]  test_ref_tracker_init+0x185/0x1e0
[   25.463029]  do_one_initcall+0xb1/0x210
[   25.463029]  kernel_init_freeable+0x197/0x250
[   25.463029]  kernel_init+0x11/0x1d0
[   25.463029]  ret_from_fork+0x1f/0x30
[   25.464510] ------------[ cut here ]------------
[   25.464622] WARNING: CPU: 6 PID: 1 at lib/ref_tracker.c:136 ref_tracker_free+0x233/0x2a0
[   25.464754] Modules linked in:
[   25.464864] CPU: 6 PID: 1 Comm: swapper/0 Tainted: G     U          TN 6.2.6-gentoo-x86_64 #1 644473e507c86b163c18e9f84729e44d3514c8d0
[   25.465002] Hardware name: System manufacturer System Product Name/PRIME Z370-A, BIOS 3004 07/12/2021
[   25.465136] RIP: 0010:ref_tracker_free+0x233/0x2a0
[   25.465249] Code: e9 71 ff ff ff 48 c7 c7 e8 88 d7 b2 e8 96 3d a5 ff 8b 55 14 85 d2 75 51 8b 45 18 85 c0 75 34 4c 89 e6 48 89 df e8 6d e7 b2 00 <0f> 0b b8 ea ff ff ff e9 42 ff ff ff 48 8d 7b 08 b8 ff ff ff ff f0
[   25.465412] RSP: 0000:ffff93854000bdf8 EFLAGS: 00010246
[   25.465526] RAX: 0000000000000000 RBX: ffffffffb4200ee0 RCX: 0000000000000000
[   25.465656] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[   25.465785] RBP: ffff8eb180c68dc0 R08: 0000000000000000 R09: 0000000000000000
[   25.465913] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000246
[   25.466043] R13: 0000000004500000 R14: 0000000000000000 R15: 0000000000000000
[   25.466172] FS:  0000000000000000(0000) GS:ffff8ec0da380000(0000) knlGS:0000000000000000
[   25.466303] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.466422] CR2: 0000000000000000 CR3: 0000000c9400b001 CR4: 00000000003706e0
[   25.466552] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   25.466681] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   25.466812] Call Trace:
[   25.466920]  <TASK>
[   25.467027]  ? test_ref_tracker_init+0x19a/0x1e0
[   25.467141]  ? do_one_initcall+0xb1/0x210
[   25.467252]  ? kernel_init_freeable+0x197/0x250
[   25.467365]  ? kernel_init+0x11/0x1d0
[   25.467476]  ? ret_from_fork+0x1f/0x30
[   25.467587]  ? test_meminit_init+0x940/0x940
[   25.467699]  test_ref_tracker_init+0x19a/0x1e0
[   25.467811]  do_one_initcall+0xb1/0x210
[   25.467922]  kernel_init_freeable+0x197/0x250
[   25.468035]  ? rest_init+0xa0/0xa0
[   25.468145]  kernel_init+0x11/0x1d0
[   25.468255]  ret_from_fork+0x1f/0x30
[   25.468365]  </TASK>
[   25.468473] ---[ end trace 0000000000000000 ]---
[   25.468585] leaked reference.
[   25.468693]  test_ref_tracker_timer_func+0x18/0x30
[   25.468807]  call_timer_fn.constprop.0+0xe/0x80
[   25.468919]  __run_timers+0x22b/0x270
[   25.469029]  run_timer_softirq+0x14/0x30
[   25.469140]  __do_softirq+0xb9/0x210
[   25.469251] leaked reference.
[   25.469359]  test_ref_tracker_init+0x9a/0x1e0
[   25.469470]  do_one_initcall+0xb1/0x210
[   25.469581]  kernel_init_freeable+0x197/0x250
[   25.469692]  kernel_init+0x11/0x1d0
[   25.469751]  ret_from_fork+0x1f/0x30
[   25.469920] ------------[ cut here ]------------
[   25.470031] WARNING: CPU: 6 PID: 1 at lib/ref_tracker.c:39 ref_tracker_dir_exit+0x110/0x180
[   25.470164] Modules linked in:
[   25.470273] CPU: 6 PID: 1 Comm: swapper/0 Tainted: G     U  W       TN 6.2.6-gentoo-x86_64 #1 644473e507c86b163c18e9f84729e44d3514c8d0
[   25.470412] Hardware name: System manufacturer System Product Name/PRIME Z370-A, BIOS 3004 07/12/2021
[   25.470545] RIP: 0010:ref_tracker_dir_exit+0x110/0x180
[   25.470659] Code: 48 89 c5 48 c7 c7 a3 88 d7 b2 e8 3b 40 a5 ff 41 8b 7e 14 85 ff 74 a7 e8 8e fd ff ff eb a0 48 8b 34 24 48 89 df e8 10 ea b2 00 <0f> 0b 8b 43 08 83 f8 01 75 35 8b 43 0c 83 f8 01 75 37 48 83 c4 08
[   25.470823] RSP: 0000:ffff93854000be70 EFLAGS: 00010246
[   25.470936] RAX: ffffffffb4200ef8 RBX: ffffffffb4200ee0 RCX: 0000000000000000
[   25.471066] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[   25.471194] RBP: ffffffffb4200ef8 R08: 0000000000000000 R09: 0000000000000000
[   25.471322] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffb4200ef8
[   25.471451] R13: ffffffffb4200ef8 R14: ffffffffb4200ef8 R15: dead000000000100
[   25.471580] FS:  0000000000000000(0000) GS:ffff8ec0da380000(0000) knlGS:0000000000000000
[   25.471712] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.471825] CR2: 0000000000000000 CR3: 0000000c9400b001 CR4: 00000000003706e0
[   25.471954] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   25.472082] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   25.472211] Call Trace:
[   25.472318]  <TASK>
[   25.472425]  ? test_meminit_init+0x940/0x940
[   25.472537]  test_ref_tracker_init+0x1c4/0x1e0
[   25.472650]  do_one_initcall+0xb1/0x210
[   25.472761]  kernel_init_freeable+0x197/0x250
[   25.472872]  ? rest_init+0xa0/0xa0
[   25.472983]  kernel_init+0x11/0x1d0
[   25.473095]  ret_from_fork+0x1f/0x30
[   25.473206]  </TASK>
[   25.473312] ---[ end trace 0000000000000000 ]---
[   25.473427] test_div64: Starting 64bit/32bit division and modulo test
[   25.474177] test_div64: Completed 64bit/32bit division and modulo test, 0.000635890s elapsed
[   25.475169] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[   25.475281] crc32: self tests passed, processed 225944 bytes in 108224 nsec
[   25.475520] crc32c: CRC_LE_BITS = 64
[   25.475629] crc32c: self tests passed, processed 112972 bytes in 54136 nsec
[   25.484631] crc32_combine: 8373 self tests passed
[   25.493589] crc32c_combine: 8373 self tests passed
[   25.494203] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[   25.494333] interval tree insert/remove
[   25.496665]  -> 8617 cycles
[   25.496882] interval tree search
[   25.513341]  -> 60876 cycles (2692 results)
[   25.513611] pciehp: pcie_port_service_register = 0
[   25.513728] pcieport 0000:00:01.0: vgaarb: pci_notify
[   25.513842] pcieport 0000:00:01.0: runtime IRQ mapping not provided by arch
[   25.514006] pcieport 0000:00:01.0: PME: Signaling with IRQ 120
[   25.514129] pcieport 0000:00:01.0: saving config space at offset 0x0 (reading 0x19018086)
[   25.514260] pcieport 0000:00:01.0: saving config space at offset 0x4 (reading 0x100407)
[   25.514391] pcieport 0000:00:01.0: saving config space at offset 0x8 (reading 0x6040007)
[   25.514522] pcieport 0000:00:01.0: saving config space at offset 0xc (reading 0x810010)
[   25.514653] pcieport 0000:00:01.0: saving config space at offset 0x10 (reading 0x0)
[   25.514783] pcieport 0000:00:01.0: saving config space at offset 0x14 (reading 0x0)
[   25.514913] pcieport 0000:00:01.0: saving config space at offset 0x18 (reading 0x10100)
[   25.515044] pcieport 0000:00:01.0: saving config space at offset 0x1c (reading 0x2000e0e0)
[   25.515176] pcieport 0000:00:01.0: saving config space at offset 0x20 (reading 0xdf00de00)
[   25.515307] pcieport 0000:00:01.0: saving config space at offset 0x24 (reading 0xf201e001)
[   25.515438] pcieport 0000:00:01.0: saving config space at offset 0x28 (reading 0x2f)
[   25.515569] pcieport 0000:00:01.0: saving config space at offset 0x2c (reading 0x2f)
[   25.515699] pcieport 0000:00:01.0: saving config space at offset 0x30 (reading 0x0)
[   25.515829] pcieport 0000:00:01.0: saving config space at offset 0x34 (reading 0x88)
[   25.515959] pcieport 0000:00:01.0: saving config space at offset 0x38 (reading 0x0)
[   25.516089] pcieport 0000:00:01.0: saving config space at offset 0x3c (reading 0x12010b)
[   25.516227] pcieport 0000:00:01.0: vgaarb: pci_notify
[   25.516342] pcieport 0000:00:1b.0: vgaarb: pci_notify
[   25.516458] pcieport 0000:00:1b.0: runtime IRQ mapping not provided by arch
[   25.516729] pcieport 0000:00:1b.0: PME: Signaling with IRQ 121
[   25.516862] pcieport 0000:00:1b.0: pciehp: Slot Capabilities      : 0x00040060
[   25.516995] pcieport 0000:00:1b.0: pciehp: Slot Status            : 0x0000
[   25.517128] pcieport 0000:00:1b.0: pciehp: Slot Control           : 0x0000
[   25.517261] pcieport 0000:00:1b.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   25.517420] pci_bus 0000:02: dev 00, created physical slot 0
[   25.517556] pcieport 0000:00:1b.0: pciehp: pcie_enable_notification: SLOTCTRL 58 write cmd 1028
[   25.517694] pcieport 0000:00:1b.0: pciehp: pciehp_check_link_active: lnk_status = 1001
[   25.519581] pcieport 0000:00:1b.0: saving config space at offset 0x0 (reading 0xa2e78086)
[   25.519718] pcieport 0000:00:1b.0: saving config space at offset 0x4 (reading 0x100407)
[   25.519852] pcieport 0000:00:1b.0: saving config space at offset 0x8 (reading 0x60400f0)
[   25.519986] pcieport 0000:00:1b.0: saving config space at offset 0xc (reading 0x810010)
[   25.520120] pcieport 0000:00:1b.0: saving config space at offset 0x10 (reading 0x0)
[   25.520253] pcieport 0000:00:1b.0: saving config space at offset 0x14 (reading 0x0)
[   25.520387] pcieport 0000:00:1b.0: saving config space at offset 0x18 (reading 0x20200)
[   25.520522] pcieport 0000:00:1b.0: saving config space at offset 0x1c (reading 0x20002020)
[   25.520657] pcieport 0000:00:1b.0: saving config space at offset 0x20 (reading 0xa010a000)
[   25.520792] pcieport 0000:00:1b.0: saving config space at offset 0x24 (reading 0x110001)
[   25.520926] pcieport 0000:00:1b.0: saving config space at offset 0x28 (reading 0x20)
[   25.521060] pcieport 0000:00:1b.0: saving config space at offset 0x2c (reading 0x20)
[   25.521194] pcieport 0000:00:1b.0: saving config space at offset 0x30 (reading 0x0)
[   25.521328] pcieport 0000:00:1b.0: saving config space at offset 0x34 (reading 0x40)
[   25.521462] pcieport 0000:00:1b.0: saving config space at offset 0x38 (reading 0x0)
[   25.521596] pcieport 0000:00:1b.0: saving config space at offset 0x3c (reading 0x12010b)
[   25.521753] pcieport 0000:00:1b.0: vgaarb: pci_notify
[   25.521868] pcieport 0000:00:1c.0: vgaarb: pci_notify
[   25.521981] pcieport 0000:00:1c.0: runtime IRQ mapping not provided by arch
[   25.522222] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[   25.522354] pcieport 0000:00:1c.0: pciehp: Slot Capabilities      : 0x00040060
[   25.522487] pcieport 0000:00:1c.0: pciehp: Slot Status            : 0x0000
[   25.522620] pcieport 0000:00:1c.0: pciehp: Slot Control           : 0x0000
[   25.522753] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[   25.522910] pci_bus 0000:03: dev 00, created physical slot 0-1
[   25.523047] pcieport 0000:00:1c.0: pciehp: pcie_enable_notification: SLOTCTRL 58 write cmd 1028
[   25.523185] pcieport 0000:00:1c.0: pciehp: pciehp_check_link_active: lnk_status = 1001
[   25.523326] pcieport 0000:00:1c.0: saving config space at offset 0x0 (reading 0xa2908086)
[   25.523461] pcieport 0000:00:1c.0: saving config space at offset 0x4 (reading 0x100407)
[   25.523595] pcieport 0000:00:1c.0: saving config space at offset 0x8 (reading 0x60400f0)
[   25.523729] pcieport 0000:00:1c.0: saving config space at offset 0xc (reading 0x810010)
[   25.523863] pcieport 0000:00:1c.0: saving config space at offset 0x10 (reading 0x0)
[   25.523997] pcieport 0000:00:1c.0: saving config space at offset 0x14 (reading 0x0)
[   25.524130] pcieport 0000:00:1c.0: saving config space at offset 0x18 (reading 0x30300)
[   25.524265] pcieport 0000:00:1c.0: saving config space at offset 0x1c (reading 0x20003030)
[   25.524400] pcieport 0000:00:1c.0: saving config space at offset 0x20 (reading 0xa030a020)
[   25.524534] pcieport 0000:00:1c.0: saving config space at offset 0x24 (reading 0x310021)
[   25.524669] pcieport 0000:00:1c.0: saving config space at offset 0x28 (reading 0x20)
[   25.524803] pcieport 0000:00:1c.0: saving config space at offset 0x2c (reading 0x20)
[   25.524936] pcieport 0000:00:1c.0: saving config space at offset 0x30 (reading 0x0)
[   25.525071] pcieport 0000:00:1c.0: saving config space at offset 0x34 (reading 0x40)
[   25.525205] pcieport 0000:00:1c.0: saving config space at offset 0x38 (reading 0x0)
[   25.525338] pcieport 0000:00:1c.0: saving config space at offset 0x3c (reading 0x12010b)
[   25.525496] pcieport 0000:00:1c.0: vgaarb: pci_notify
[   25.525610] pcieport 0000:00:1c.4: vgaarb: pci_notify
[   25.525723] pcieport 0000:00:1c.4: runtime IRQ mapping not provided by arch
[   25.525915] pcieport 0000:00:1c.4: PME: Signaling with IRQ 123
[   25.526071] pcieport 0000:00:1c.4: AER: enabled with IRQ 123
[   25.526192] pcieport 0000:00:1c.4: saving config space at offset 0x0 (reading 0xa2948086)
[   25.526324] pcieport 0000:00:1c.4: saving config space at offset 0x4 (reading 0x100407)
[   25.526459] pcieport 0000:00:1c.4: saving config space at offset 0x8 (reading 0x60400f0)
[   25.526592] pcieport 0000:00:1c.4: saving config space at offset 0xc (reading 0x810010)
[   25.526723] pcieport 0000:00:1c.4: saving config space at offset 0x10 (reading 0x0)
[   25.526855] pcieport 0000:00:1c.4: saving config space at offset 0x14 (reading 0x0)
[   25.526986] pcieport 0000:00:1c.4: saving config space at offset 0x18 (reading 0x40400)
[   25.527118] pcieport 0000:00:1c.4: saving config space at offset 0x1c (reading 0x200000f0)
[   25.527251] pcieport 0000:00:1c.4: saving config space at offset 0x20 (reading 0xdf20df20)
[   25.527383] pcieport 0000:00:1c.4: saving config space at offset 0x24 (reading 0x1fff1)
[   25.527515] pcieport 0000:00:1c.4: saving config space at offset 0x28 (reading 0x0)
[   25.527646] pcieport 0000:00:1c.4: saving config space at offset 0x2c (reading 0x0)
[   25.527778] pcieport 0000:00:1c.4: saving config space at offset 0x30 (reading 0x0)
[   25.527909] pcieport 0000:00:1c.4: saving config space at offset 0x34 (reading 0x40)
[   25.528040] pcieport 0000:00:1c.4: saving config space at offset 0x38 (reading 0x0)
[   25.528172] pcieport 0000:00:1c.4: saving config space at offset 0x3c (reading 0x12010b)
[   25.528331] pcieport 0000:00:1c.4: vgaarb: pci_notify
[   25.528445] pcieport 0000:00:1d.0: vgaarb: pci_notify
[   25.528558] pcieport 0000:00:1d.0: runtime IRQ mapping not provided by arch
[   25.528798] pcieport 0000:00:1d.0: PME: Signaling with IRQ 124
[   25.528958] pcieport 0000:00:1d.0: AER: enabled with IRQ 124
[   25.529080] pcieport 0000:00:1d.0: saving config space at offset 0x0 (reading 0xa2988086)
[   25.529215] pcieport 0000:00:1d.0: saving config space at offset 0x4 (reading 0x100407)
[   25.529349] pcieport 0000:00:1d.0: saving config space at offset 0x8 (reading 0x60400f0)
[   25.529483] pcieport 0000:00:1d.0: saving config space at offset 0xc (reading 0x810010)
[   25.529617] pcieport 0000:00:1d.0: saving config space at offset 0x10 (reading 0x0)
[   25.529753] pcieport 0000:00:1d.0: saving config space at offset 0x14 (reading 0x0)
[   25.529887] pcieport 0000:00:1d.0: saving config space at offset 0x18 (reading 0x50500)
[   25.530021] pcieport 0000:00:1d.0: saving config space at offset 0x1c (reading 0x200000f0)
[   25.530156] pcieport 0000:00:1d.0: saving config space at offset 0x20 (reading 0xdf10df10)
[   25.530291] pcieport 0000:00:1d.0: saving config space at offset 0x24 (reading 0x1fff1)
[   25.530425] pcieport 0000:00:1d.0: saving config space at offset 0x28 (reading 0x0)
[   25.530559] pcieport 0000:00:1d.0: saving config space at offset 0x2c (reading 0x0)
[   25.530693] pcieport 0000:00:1d.0: saving config space at offset 0x30 (reading 0x0)
[   25.530826] pcieport 0000:00:1d.0: saving config space at offset 0x34 (reading 0x40)
[   25.530959] pcieport 0000:00:1d.0: saving config space at offset 0x38 (reading 0x0)
[   25.531093] pcieport 0000:00:1d.0: saving config space at offset 0x3c (reading 0x12010b)
[   25.531255] pcieport 0000:00:1d.0: vgaarb: pci_notify
[   25.531389] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   25.531518] acpiphp_ibm: ibm_acpiphp_init
[   25.535320] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[   25.535910] IPMI message handler: version 39.2
[   25.536025] ipmi device interface
[   25.536199] ipmi_si: IPMI System Interface driver
[   25.536326] ipmi_si: Unable to find any System Interface(s)
[   25.536443] ipmi_ssif: IPMI SSIF Interface driver
[   25.536560] i2c-core: driver [ipmi_ssif] registered
[   25.536673] IPMI Watchdog: driver initialized
[   25.536783] IPMI poweroff: Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot
[   25.537685] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[   25.537819] ACPI: button: Sleep Button [SLPB]
[   25.537947] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[   25.538079] ACPI: button: Power Button [PWRB]
[   25.538205] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   25.540085] ACPI: button: Power Button [PWRF]
[   25.540733] thermal LNXTHERM:00: registered as thermal_zone0
[   25.540847] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[   25.541032] thermal LNXTHERM:01: registered as thermal_zone1
[   25.541146] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[   25.541378] ioatdma: Intel(R) QuickData Technology Driver 5.00
[   25.541506] i2c-core: driver [LP3971] registered
[   25.541619] i2c-core: driver [lp872x] registered
[   25.541776] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   25.542296] hpet_acpi_add: no address or irqs in _CRS
[   25.542461] Non-volatile memory driver v1.3
[   25.542595] Linux agpgart interface v0.103
[   25.542710] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[   25.542850] i2c-core: driver [tpm_i2c_infineon] registered
[   25.544812] loop: module loaded
[   25.544976] zram: Added device: zram0
[   25.545136] zram: Added device: zram1
[   25.545294] zram: Added device: zram2
[   25.545481] zram: Added device: zram3
[   25.545594] usbcore: registered new interface driver rtsx_usb
[   25.545948] ahci 0000:00:17.0: vgaarb: pci_notify
[   25.545973] nvme 0000:05:00.0: vgaarb: pci_notify
[   25.546061] ahci 0000:00:17.0: runtime IRQ mapping not provided by arch
[   25.546179] nvme 0000:05:00.0: runtime IRQ mapping not provided by arch
[   25.546302] ahci 0000:00:17.0: version 3.0
[   25.546498] nvme nvme0: pci function 0000:05:00.0
[   25.550143] nvme 0000:05:00.0: saving config space at offset 0x0 (reading 0x25228086)
[   25.550282] nvme 0000:05:00.0: saving config space at offset 0x4 (reading 0x100406)
[   25.553784] nvme 0000:05:00.0: saving config space at offset 0x8 (reading 0x1080200)
[   25.553915] nvme 0000:05:00.0: saving config space at offset 0xc (reading 0x10)
[   25.554046] nvme 0000:05:00.0: saving config space at offset 0x10 (reading 0xdf100004)
[   25.554178] nvme 0000:05:00.0: saving config space at offset 0x14 (reading 0x0)
[   25.554308] nvme 0000:05:00.0: saving config space at offset 0x18 (reading 0x0)
[   25.554445] nvme 0000:05:00.0: saving config space at offset 0x1c (reading 0x0)
[   25.554581] nvme 0000:05:00.0: saving config space at offset 0x20 (reading 0x0)
[   25.554718] nvme 0000:05:00.0: saving config space at offset 0x24 (reading 0x0)
[   25.554854] nvme 0000:05:00.0: saving config space at offset 0x28 (reading 0x0)
[   25.554991] nvme 0000:05:00.0: saving config space at offset 0x2c (reading 0x38108086)
[   25.555129] nvme 0000:05:00.0: saving config space at offset 0x30 (reading 0x0)
[   25.555265] nvme 0000:05:00.0: saving config space at offset 0x34 (reading 0x40)
[   25.555402] nvme 0000:05:00.0: saving config space at offset 0x38 (reading 0x0)
[   25.555538] nvme 0000:05:00.0: saving config space at offset 0x3c (reading 0x10b)
[   25.560120] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x2 impl SATA mode
[   25.560256] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
[   25.560841] scsi host0: ahci
[   25.561191] scsi host1: ahci
[   25.561514] scsi host2: ahci
[   25.561786] scsi host3: ahci
[   25.562069] scsi host4: ahci
[   25.562305] scsi host5: ahci
[   25.562438] ata1: DUMMY
[   25.562547] ata2: SATA max UDMA/133 abar m2048@0xdf326000 port 0xdf326180 irq 125
[   25.562676] ata3: DUMMY
[   25.562783] ata4: DUMMY
[   25.562891] ata5: DUMMY
[   25.562998] ata6: DUMMY
[   25.563127] ahci 0000:00:17.0: vgaarb: pci_notify
[   25.563344] ACPI: bus type drm_connector registered
[   25.563505] [drm] radeon kernel modesetting enabled.
[   25.563678] i915 0000:00:02.0: vgaarb: pci_notify
[   25.563793] i915 0000:00:02.0: runtime IRQ mapping not provided by arch
[   25.564642] i915 0000:00:02.0: vgaarb: deactivate vga console
[   25.565975] Console: switching to colour dummy device 80x25
[   25.567133] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[   25.567137] i915 0000:00:02.0: vgaarb: decoding count now is: 1
[   25.567139] i915 0000:00:02.0: vgaarb: __vga_tryget: 1
[   25.567140] i915 0000:00:02.0: vgaarb: __vga_tryget: owns: 3
[   25.567142] i915 0000:00:02.0: vgaarb: __vga_put
[   25.567155] Loading firmware: i915/kbl_dmc_ver1_04.bin
[   25.567174] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2
[   25.567177] i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management.
[   25.567179] i915 0000:00:02.0: [drm] DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[   25.567347] i2c i2c-0: adapter [i915 gmbus dpc] registered
[   25.567387] i2c i2c-1: adapter [i915 gmbus dpb] registered
[   25.567394] i2c i2c-2: adapter [i915 gmbus dpd] registered
[   25.567457] i915 0000:00:02.0: vgaarb: __vga_tryget: 1
[   25.567458] i915 0000:00:02.0: vgaarb: __vga_tryget: owns: 3
[   25.567460] i915 0000:00:02.0: vgaarb: __vga_put
[   25.575879] nvme nvme0: 2/0/6 default/read/poll queues
[   25.583020] nvme 0000:05:00.0: vgaarb: pci_notify
[   25.835945] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP
[   25.836370] tsc: Refined TSC clocksource calibration: 3696.000 MHz
[   25.836377] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns
[   25.836390] clocksource: Switched to clocksource tsc
[   25.836797] i915 0000:00:02.0: [drm] [ENCODER:110:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[   25.836801] i915 0000:00:02.0: [drm] [ENCODER:114:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
[   25.839423] i2c i2c-3: adapter [AUX B/DDI B/PHY B] registered
[   25.839480] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[   25.841070] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   25.841128] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[   25.841177] i915 0000:00:02.0: vgaarb: pci_notify
[   25.841197] i2c-core: driver [tda998x] registered
[   25.841202] i2c-core: driver [tda9950] registered
[   25.841351] tun: Universal TUN/TAP device driver, 1.6
[   25.841396] e100: Intel(R) PRO/100 Network Driver
[   25.841398] e100: Copyright(c) 1999-2006 Intel Corporation
[   25.841405] e1000: Intel(R) PRO/1000 Network Driver
[   25.841406] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   25.841413] e1000e: Intel(R) PRO/1000 Network Driver
[   25.841414] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   25.841423] e1000e 0000:00:1f.6: vgaarb: pci_notify
[   25.841425] e1000e 0000:00:1f.6: runtime IRQ mapping not provided by arch
[   25.841489] e1000e 0000:00:1f.6: saving config space at offset 0x0 (reading 0x15b88086)
[   25.841493] e1000e 0000:00:1f.6: saving config space at offset 0x4 (reading 0x100006)
[   25.841497] e1000e 0000:00:1f.6: saving config space at offset 0x8 (reading 0x2000000)
[   25.841500] e1000e 0000:00:1f.6: saving config space at offset 0xc (reading 0x0)
[   25.841504] e1000e 0000:00:1f.6: saving config space at offset 0x10 (reading 0xdf300000)
[   25.841507] e1000e 0000:00:1f.6: saving config space at offset 0x14 (reading 0x0)
[   25.841511] e1000e 0000:00:1f.6: saving config space at offset 0x18 (reading 0x0)
[   25.841514] e1000e 0000:00:1f.6: saving config space at offset 0x1c (reading 0x0)
[   25.841517] e1000e 0000:00:1f.6: saving config space at offset 0x20 (reading 0x0)
[   25.841521] e1000e 0000:00:1f.6: saving config space at offset 0x24 (reading 0x0)
[   25.841524] e1000e 0000:00:1f.6: saving config space at offset 0x28 (reading 0x0)
[   25.841527] e1000e 0000:00:1f.6: saving config space at offset 0x2c (reading 0x86721043)
[   25.841531] e1000e 0000:00:1f.6: saving config space at offset 0x30 (reading 0x0)
[   25.841534] e1000e 0000:00:1f.6: saving config space at offset 0x34 (reading 0xc8)
[   25.841538] e1000e 0000:00:1f.6: saving config space at offset 0x38 (reading 0x0)
[   25.841541] e1000e 0000:00:1f.6: saving config space at offset 0x3c (reading 0x10b)
[   25.841564] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   25.851818] i2c i2c-1: NAK from device addr 0x50 msg #0
[   25.855032] i2c i2c-0: NAK from device addr 0x50 msg #0
[   25.858243] i2c i2c-2: NAK from device addr 0x50 msg #0
[   25.863581] fbcon: i915drmfb (fb0) is primary device
[   25.879470] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   25.880101] ata2.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[   25.880104] ata2.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[   25.880419] ata2.00: supports DRM functions and may not be fully accessible
[   25.880420] ata2.00: ATA-9: Samsung SSD 840 EVO 1TB, EXT0DB6Q, max UDMA/133
[   25.881209] ata2.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[   25.882008] ata2.00: Features: Trust NCQ-sndrcv
[   25.882630] ata2.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[   25.882632] ata2.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[   25.883016] ata2.00: supports DRM functions and may not be fully accessible
[   25.883988] ata2.00: configured for UDMA/133
[   25.884127] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 840  DB6Q PQ: 0 ANSI: 5
[   25.884563] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   25.884596] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[   25.884601] sd 1:0:0:0: [sda] Write Protect is off
[   25.884603] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   25.884610] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA; mp='8' o='16' d.h_l='8' d.b_l='8' b[o+2]='00000100
[   25.884623] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[   25.884994]  sda: sda1
[   25.885208] sd 1:0:0:0: [sda] supports TCG Opal
[   25.885209] sd 1:0:0:0: [sda] Attached SCSI disk
[   25.935778] Console: switching to colour frame buffer device 640x196
[   25.952527] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[   25.963498] i2c i2c-1: NAK from device addr 0x50 msg #0
[   25.966716] i2c i2c-0: NAK from device addr 0x50 msg #0
[   25.969930] i2c i2c-2: NAK from device addr 0x50 msg #0
[   25.990697] i2c i2c-1: NAK from device addr 0x50 msg #0
[   25.993916] i2c i2c-0: NAK from device addr 0x50 msg #0
[   25.997131] i2c i2c-2: NAK from device addr 0x50 msg #0
[   26.148238] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 18:31:bf:4c:45:6a
[   26.148252] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[   26.148321] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[   26.148333] e1000e 0000:00:1f.6: vgaarb: pci_notify
[   26.148352] igb: Intel(R) Gigabit Ethernet Network Driver
[   26.148358] igb: Copyright (c) 2007-2014 Intel Corporation.
[   26.148373] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[   26.148379] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[   26.148424] usbcore: registered new interface driver ath6kl_usb
[   26.148438] usbcore: registered new interface driver mt7601u
[   26.148453] usbcore: registered new interface driver rndis_wlan
[   26.148462] usbcore: registered new interface driver r8152
[   26.148471] usbcore: registered new interface driver cdc_ether
[   26.148480] usbcore: registered new interface driver cdc_eem
[   26.148489] usbcore: registered new interface driver rndis_host
[   26.148502] usbcore: registered new interface driver r8153_ecm
[   26.148517] ehci_hcd: block sizes: qh 144 qtd 96 itd 192 sitd 96
[   26.148528] ohci_hcd: block sizes: ed 112 td 96
[   26.148555] usbcore: registered new interface driver usblp
[   26.148565] usbcore: registered new interface driver usb-storage
[   26.148574] usbcore: registered new interface driver ums-realtek
[   26.148581] xhci_hcd 0000:00:14.0: vgaarb: pci_notify
[   26.148585] xhci_hcd 0000:01:00.2: vgaarb: pci_notify
[   26.148593] xhci_hcd 0000:00:14.0: runtime IRQ mapping not provided by arch
[   26.148594] usbcore: registered new interface driver usbserial_generic
[   26.148595] usbserial: generic: using generic open
[   26.148596] usbserial: generic: using generic write
[   26.148596] usbserial: generic: using generic close
[   26.148597] usbserial: generic: using generic write_room
[   26.148597] usbserial: generic: using generic chars_in_buffer
[   26.148598] usbserial: generic: using generic read_bulk_callback
[   26.148599] usbserial: generic: using generic write_bulk_callback
[   26.148599] usbserial: generic: using generic process_read_urb
[   26.148600] usbserial: generic: using generic prepare_write_buffer
[   26.148603] xhci_hcd 0000:01:00.2: runtime IRQ mapping not provided by arch
[   26.148604] xhci_hcd 0000:04:00.0: vgaarb: pci_notify
[   26.148606] usbserial: USB Serial support registered for generic
[   26.148612] xhci_hcd 0000:04:00.0: runtime IRQ mapping not provided by arch
[   26.148614] usbcore: registered new interface driver ark3116
[   26.148615] usbserial: ark3116: using generic write
[   26.148615] usbserial: ark3116: using generic write_room
[   26.148616] usbserial: ark3116: using generic chars_in_buffer
[   26.148616] usbserial: ark3116: using generic read_bulk_callback
[   26.148617] usbserial: ark3116: using generic write_bulk_callback
[   26.148617] usbserial: ark3116: using generic prepare_write_buffer
[   26.148620] usbserial: USB Serial support registered for ark3116
[   26.148665] xhci_hcd 0000:01:00.2: restoring config space at offset 0x4 (was 0x100002, writing 0x100006)
[   26.148704] xhci_hcd 0000:01:00.2: xHCI Host Controller
[   26.148712] usbcore: registered new interface driver usb_serial_simple
[   26.148723] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 1
[   26.148727] usbserial: carelink: using generic open
[   26.148728] usbserial: carelink: using generic write
[   26.148753] xhci_hcd 0000:01:00.2: Resetting HCD
[   26.148756] usbserial: carelink: using generic close
[   26.148756] usbserial: carelink: using generic write_room
[   26.148824] xhci_hcd 0000:04:00.0: enabling bus mastering
[   26.148826] usbserial: carelink: using generic chars_in_buffer
[   26.148826] usbserial: carelink: using generic read_bulk_callback
[   26.148827] usbserial: carelink: using generic write_bulk_callback
[   26.148827] usbserial: carelink: using generic process_read_urb
[   26.148831] xhci_hcd 0000:00:14.0: enabling bus mastering
[   26.148837] xhci_hcd 0000:04:00.0: xHCI Host Controller
[   26.148840] usbserial: carelink: using generic prepare_write_buffer
[   26.148843] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   26.148847] usbserial: USB Serial support registered for carelink
[   26.148848] usbserial: zio: using generic open
[   26.148849] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[   26.148857] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[   26.148862] usbserial: zio: using generic write
[   26.148863] usbserial: zio: using generic close
[   26.148895] xhci_hcd 0000:04:00.0: Resetting HCD
[   26.148901] usbserial: zio: using generic write_room
[   26.148902] usbserial: zio: using generic chars_in_buffer
[   26.148913] xhci_hcd 0000:00:14.0: Resetting HCD
[   26.148913] usbserial: zio: using generic read_bulk_callback
[   26.148914] usbserial: zio: using generic write_bulk_callback
[   26.148993] usbserial: zio: using generic process_read_urb
[   26.149000] usbserial: zio: using generic prepare_write_buffer
[   26.149011] usbserial: USB Serial support registered for zio
[   26.149019] usbserial: funsoft: using generic open
[   26.149025] usbserial: funsoft: using generic write
[   26.149032] usbserial: funsoft: using generic close
[   26.149038] usbserial: funsoft: using generic write_room
[   26.149045] usbserial: funsoft: using generic chars_in_buffer
[   26.149052] usbserial: funsoft: using generic read_bulk_callback
[   26.149059] usbserial: funsoft: using generic write_bulk_callback
[   26.149066] usbserial: funsoft: using generic process_read_urb
[   26.149074] usbserial: funsoft: using generic prepare_write_buffer
[   26.149084] usbserial: USB Serial support registered for funsoft
[   26.149093] usbserial: flashloader: using generic open
[   26.149099] usbserial: flashloader: using generic write
[   26.149106] usbserial: flashloader: using generic close
[   26.149113] usbserial: flashloader: using generic write_room
[   26.149120] usbserial: flashloader: using generic chars_in_buffer
[   26.149127] usbserial: flashloader: using generic read_bulk_callback
[   26.149134] usbserial: flashloader: using generic write_bulk_callback
[   26.149142] usbserial: flashloader: using generic process_read_urb
[   26.149149] usbserial: flashloader: using generic prepare_write_buffer
[   26.149159] usbserial: USB Serial support registered for flashloader
[   26.149166] usbserial: google: using generic open
[   26.149173] usbserial: google: using generic write
[   26.149179] usbserial: google: using generic close
[   26.149185] usbserial: google: using generic write_room
[   26.149192] usbserial: google: using generic chars_in_buffer
[   26.149199] usbserial: google: using generic read_bulk_callback
[   26.149206] usbserial: google: using generic write_bulk_callback
[   26.149213] usbserial: google: using generic process_read_urb
[   26.149220] usbserial: google: using generic prepare_write_buffer
[   26.149229] usbserial: USB Serial support registered for google
[   26.149236] usbserial: libtransistor: using generic open
[   26.149243] usbserial: libtransistor: using generic write
[   26.149250] usbserial: libtransistor: using generic close
[   26.149257] usbserial: libtransistor: using generic write_room
[   26.149264] usbserial: libtransistor: using generic chars_in_buffer
[   26.149266] xhci_hcd 0000:01:00.2: Reset complete
[   26.149272] usbserial: libtransistor: using generic read_bulk_callback
[   26.149273] usbserial: libtransistor: using generic write_bulk_callback
[   26.149280] xhci_hcd 0000:01:00.2: Enabling 64-bit DMA addresses.
[   26.149288] usbserial: libtransistor: using generic process_read_urb
[   26.149288] usbserial: libtransistor: using generic prepare_write_buffer
[   26.149297] xhci_hcd 0000:01:00.2: Calling HCD init
[   26.149307] usbserial: USB Serial support registered for libtransistor
[   26.149336] usbserial: vivopay: using generic open
[   26.149348] usbserial: vivopay: using generic write
[   26.149357] usbserial: vivopay: using generic close
[   26.149366] usbserial: vivopay: using generic write_room
[   26.149373] usbserial: vivopay: using generic chars_in_buffer
[   26.149380] usbserial: vivopay: using generic read_bulk_callback
[   26.149390] usbserial: vivopay: using generic write_bulk_callback
[   26.149397] usbserial: vivopay: using generic process_read_urb
[   26.149405] usbserial: vivopay: using generic prepare_write_buffer
[   26.149415] xhci_hcd 0000:01:00.2: Called HCD init
[   26.149419] usbserial: USB Serial support registered for vivopay
[   26.149424] xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[   26.149432] usbserial: moto_modem: using generic open
[   26.149432] usbserial: moto_modem: using generic write
[   26.149443] xhci_hcd 0000:01:00.2: Got SBRN 49
[   26.149450] usbserial: moto_modem: using generic close
[   26.149451] usbserial: moto_modem: using generic write_room
[   26.149462] xhci_hcd 0000:01:00.2: enabling Mem-Wr-Inval
[   26.149463] usbserial: moto_modem: using generic chars_in_buffer
[   26.149464] usbserial: moto_modem: using generic read_bulk_callback
[   26.149472] xhci_hcd 0000:01:00.2: MWI active
[   26.149478] usbserial: moto_modem: using generic write_bulk_callback
[   26.149479] usbserial: moto_modem: using generic process_read_urb
[   26.149486] xhci_hcd 0000:01:00.2: Finished xhci_pci_reinit
[   26.149494] usbserial: moto_modem: using generic prepare_write_buffer
[   26.149497] usbserial: USB Serial support registered for moto_modem
[   26.149973] xhci_hcd 0000:00:14.0: Reset complete
[   26.149973] xhci_hcd 0000:00:14.0: Enabling 64-bit DMA addresses.
[   26.149974] xhci_hcd 0000:00:14.0: Calling HCD init
[   26.149984] pcieport 0000:00:1c.4: AER: Corrected error received: 0000:00:1c.4
[   26.149991] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[   26.149992] pcieport 0000:00:1c.4:   device [8086:a294] error status/mask=00000001/00002000
[   26.149993] pcieport 0000:00:1c.4:    [ 0] RxErr                  (First)
[   26.150142] xhci_hcd 0000:00:14.0: Called HCD init
[   26.150143] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[   26.150144] xhci_hcd 0000:00:14.0: Got SBRN 48
[   26.150152] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[   26.150152] xhci_hcd 0000:00:14.0: Finished xhci_pci_reinit
[   26.150561] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   26.150563] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[   26.150564] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[   26.150585] usb usb3: default language 0x0409
[   26.150591] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[   26.150592] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.150593] usb usb3: Product: xHCI Host Controller
[   26.150594] usb usb3: Manufacturer: Linux 6.2.6-gentoo-x86_64 xhci-hcd
[   26.150595] usb usb3: SerialNumber: 0000:00:14.0
[   26.150710] usb usb3: usb_probe_device
[   26.150712] xHCI xhci_add_endpoint called for root hub
[   26.150713] xHCI xhci_check_bandwidth called for root hub
[   26.150718] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[   26.150733] hub 3-0:1.0: usb_probe_interface
[   26.150734] hub 3-0:1.0: usb_probe_interface - got id
[   26.150735] hub 3-0:1.0: USB hub found
[   26.150793] hub 3-0:1.0: 16 ports detected
[   26.152287] xhci_hcd 0000:01:00.2: xHCI Host Controller
[   26.152525] usb usb4: default language 0x0409
[   26.152530] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[   26.152531] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.152532] usb usb4: Product: xHCI Host Controller
[   26.152533] usb usb4: Manufacturer: Linux 6.2.6-gentoo-x86_64 xhci-hcd
[   26.152534] usb usb4: SerialNumber: 0000:00:14.0
[   26.152610] usb usb4: usb_probe_device
[   26.152611] xHCI xhci_add_endpoint called for root hub
[   26.152612] xHCI xhci_check_bandwidth called for root hub
[   26.152618] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[   26.152633] hub 4-0:1.0: usb_probe_interface
[   26.152634] hub 4-0:1.0: usb_probe_interface - got id
[   26.152635] hub 4-0:1.0: USB hub found
[   26.152677] hub 4-0:1.0: 10 ports detected
[   26.152798] usb usb4-port1: peered to usb3-port1
[   26.152899] usb usb4-port2: peered to usb3-port2
[   26.153000] usb usb4-port3: peered to usb3-port3
[   26.153102] usb usb4-port4: peered to usb3-port4
[   26.153198] usb usb4-port5: peered to usb3-port5
[   26.153292] usbserial: motorola_tetra: using generic open
[   26.153297] usb usb4-port6: peered to usb3-port6
[   26.153393] usb usb4-port7: peered to usb3-port7
[   26.153490] usb usb4-port8: peered to usb3-port8
[   26.153585] usb usb4-port9: peered to usb3-port9
[   26.153680] usb usb4-port10: peered to usb3-port10
[   26.153683] usb usb4: port-1 disable U1/U2 _DSM: -19
[   26.153685] usb usb4: port-2 disable U1/U2 _DSM: -19
[   26.153686] usb usb4: port-3 disable U1/U2 _DSM: -19
[   26.153688] usb usb4: port-4 disable U1/U2 _DSM: -19
[   26.153689] usb usb4: port-5 disable U1/U2 _DSM: -19
[   26.153690] usb usb4: port-6 disable U1/U2 _DSM: -19
[   26.153692] usb usb4: port-7 disable U1/U2 _DSM: -19
[   26.153693] usb usb4: port-8 disable U1/U2 _DSM: -19
[   26.153694] usb usb4: port-9 disable U1/U2 _DSM: -19
[   26.153695] usb usb4: port-10 disable U1/U2 _DSM: -19
[   26.153857] xhci_hcd 0000:00:14.0: vgaarb: pci_notify
[   26.154513] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 5
[   26.155727] usbserial: motorola_tetra: using generic write
[   26.155728] usbserial: motorola_tetra: using generic close
[   26.156991] xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[   26.158202] usbserial: motorola_tetra: using generic write_room
[   26.158203] usbserial: motorola_tetra: using generic chars_in_buffer
[   26.159445] usb usb1: default language 0x0409
[   26.160698] usbserial: motorola_tetra: using generic read_bulk_callback
[   26.160699] usbserial: motorola_tetra: using generic write_bulk_callback
[   26.161911] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[   26.163106] usbserial: motorola_tetra: using generic process_read_urb
[   26.163107] usbserial: motorola_tetra: using generic prepare_write_buffer
[   26.164307] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.165510] usbserial: USB Serial support registered for motorola_tetra
[   26.166740] usb usb1: Product: xHCI Host Controller
[   26.167932] usbserial: nokia: using generic open
[   26.167933] usbserial: nokia: using generic write
[   26.169131] usb usb1: Manufacturer: Linux 6.2.6-gentoo-x86_64 xhci-hcd
[   26.170046] xhci_hcd 0000:00:14.0: Port change event, 3-6, id 6, portsc: 0x20ae1
[   26.170049] xhci_hcd 0000:00:14.0: handle_port_status: starting usb3 port polling.
[   26.170106] xhci_hcd 0000:00:14.0: Port change event, 3-11, id 11, portsc: 0x206e1
[   26.170110] xhci_hcd 0000:00:14.0: handle_port_status: starting usb3 port polling.
[   26.170170] xhci_hcd 0000:00:14.0: Port change event, 3-13, id 13, portsc: 0x206e1
[   26.170173] xhci_hcd 0000:00:14.0: handle_port_status: starting usb3 port polling.
[   26.170233] xhci_hcd 0000:00:14.0: Port change event, 3-14, id 14, portsc: 0x20ae1
[   26.170236] xhci_hcd 0000:00:14.0: handle_port_status: starting usb3 port polling.
[   26.170373] usbserial: nokia: using generic close
[   26.170373] usbserial: nokia: using generic write_room
[   26.171566] usb usb1: SerialNumber: 0000:01:00.2
[   26.172752] usbserial: nokia: using generic chars_in_buffer
[   26.172752] usbserial: nokia: using generic read_bulk_callback
[   26.174080] usb usb1: usb_probe_device
[   26.175193] usbserial: nokia: using generic write_bulk_callback
[   26.175194] usbserial: nokia: using generic process_read_urb
[   26.176373] xHCI xhci_add_endpoint called for root hub
[   26.177534] usbserial: nokia: using generic prepare_write_buffer
[   26.177539] usbserial: USB Serial support registered for nokia
[   26.178728] xHCI xhci_check_bandwidth called for root hub
[   26.178734] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[   26.179940] usbserial: novatel_gps: using generic open
[   26.179940] usbserial: novatel_gps: using generic write
[   26.181138] hub 1-0:1.0: usb_probe_interface
[   26.182306] usbserial: novatel_gps: using generic close
[   26.182306] usbserial: novatel_gps: using generic write_room
[   26.183534] hub 1-0:1.0: usb_probe_interface - got id
[   26.184711] usbserial: novatel_gps: using generic chars_in_buffer
[   26.184712] usbserial: novatel_gps: using generic read_bulk_callback
[   26.185894] hub 1-0:1.0: USB hub found
[   26.187131] usbserial: novatel_gps: using generic write_bulk_callback
[   26.187132] usbserial: novatel_gps: using generic process_read_urb
[   26.188321] hub 1-0:1.0: 2 ports detected
[   26.189483] usbserial: novatel_gps: using generic prepare_write_buffer
[   26.189488] usbserial: USB Serial support registered for novatel_gps
[   26.190818] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[   26.191915] usbserial: hp4x: using generic open
[   26.191915] usbserial: hp4x: using generic write
[   26.193092] usb usb5: default language 0x0409
[   26.194248] usbserial: hp4x: using generic close
[   26.194249] usbserial: hp4x: using generic write_room
[   26.195411] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[   26.196586] usbserial: hp4x: using generic chars_in_buffer
[   26.196586] usbserial: hp4x: using generic read_bulk_callback
[   26.197748] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.198907] usbserial: hp4x: using generic write_bulk_callback
[   26.198907] usbserial: hp4x: using generic process_read_urb
[   26.200102] usb usb5: Product: xHCI Host Controller
[   26.201245] usbserial: hp4x: using generic prepare_write_buffer
[   26.201249] usbserial: USB Serial support registered for hp4x
[   26.202389] usb usb5: Manufacturer: Linux 6.2.6-gentoo-x86_64 xhci-hcd
[   26.203575] usbserial: suunto: using generic open
[   26.203576] usbserial: suunto: using generic write
[   26.203649] xhci_hcd 0000:04:00.0: Reset complete
[   26.203650] xhci_hcd 0000:04:00.0: Enabling 32-bit DMA addresses.
[   26.203650] xhci_hcd 0000:04:00.0: Calling HCD init
[   26.203720] xhci_hcd 0000:04:00.0: Called HCD init
[   26.203720] xhci_hcd 0000:04:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010
[   26.203722] xhci_hcd 0000:04:00.0: Got SBRN 48
[   26.203725] xhci_hcd 0000:04:00.0: enabling Mem-Wr-Inval
[   26.203727] xhci_hcd 0000:04:00.0: MWI active
[   26.203728] xhci_hcd 0000:04:00.0: Finished xhci_pci_reinit
[   26.203952] xhci_hcd 0000:04:00.0: xHCI Host Controller
[   26.204715] usb usb5: SerialNumber: 0000:01:00.2
[   26.205852] usbserial: suunto: using generic close
[   26.205853] usbserial: suunto: using generic write_room
[   26.207121] usb usb5: usb_probe_device
[   26.208188] usbserial: suunto: using generic chars_in_buffer
[   26.208189] usbserial: suunto: using generic read_bulk_callback
[   26.209323] xHCI xhci_add_endpoint called for root hub
[   26.210529] usbserial: suunto: using generic write_bulk_callback
[   26.210530] usbserial: suunto: using generic process_read_urb
[   26.211676] xHCI xhci_check_bandwidth called for root hub
[   26.211682] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[   26.212826] usbserial: suunto: using generic prepare_write_buffer
[   26.212834] usbserial: USB Serial support registered for suunto
[   26.214106] hub 5-0:1.0: usb_probe_interface
[   26.215206] usbserial: siemens_mpi: using generic open
[   26.215207] usbserial: siemens_mpi: using generic write
[   26.216341] hub 5-0:1.0: usb_probe_interface - got id
[   26.217569] usbserial: siemens_mpi: using generic close
[   26.217570] usbserial: siemens_mpi: using generic write_room
[   26.218710] hub 5-0:1.0: USB hub found
[   26.219855] usbserial: siemens_mpi: using generic chars_in_buffer
[   26.220999] hub 5-0:1.0: 4 ports detected
[   26.222115] usbserial: siemens_mpi: using generic read_bulk_callback
[   26.222116] usbserial: siemens_mpi: using generic write_bulk_callback
[   26.223278] usb usb5-port1: peered to usb1-port1
[   26.224393] usbserial: siemens_mpi: using generic process_read_urb
[   26.224394] usbserial: siemens_mpi: using generic prepare_write_buffer
[   26.225538] usb usb5-port2: peered to usb1-port2
[   26.226681] usbserial: USB Serial support registered for siemens_mpi
[   26.227883] usb usb5: port-1 disable U1/U2 _DSM: -19
[   26.228969] userial_init: registered 8 ttyGS* devices
[   26.230113] usb usb5: port-2 disable U1/U2 _DSM: -19
[   26.231242] UDC core: g_ether: couldn't find an available UDC
[   26.232362] usb usb5: port-3 disable U1/U2 _DSM: -19
[   26.233524] file system registered
[   26.234636] usb usb5: port-4 disable U1/U2 _DSM: -19
[   26.235755] UDC core: g_cdc: couldn't find an available UDC
[   26.237001] xhci_hcd 0000:01:00.2: vgaarb: pci_notify
[   26.237027] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
[   26.237030] xhci_hcd 0000:04:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[   26.237060] usb usb2: default language 0x0409
[   26.237065] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[   26.237066] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.237067] usb usb2: Product: xHCI Host Controller
[   26.237068] usb usb2: Manufacturer: Linux 6.2.6-gentoo-x86_64 xhci-hcd
[   26.237069] usb usb2: SerialNumber: 0000:04:00.0
[   26.237155] usb usb2: usb_probe_device
[   26.237156] xHCI xhci_add_endpoint called for root hub
[   26.237157] xHCI xhci_check_bandwidth called for root hub
[   26.237162] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[   26.237173] hub 2-0:1.0: usb_probe_interface
[   26.237174] hub 2-0:1.0: usb_probe_interface - got id
[   26.237175] hub 2-0:1.0: USB hub found
[   26.237180] hub 2-0:1.0: 2 ports detected
[   26.237283] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[   26.237288] usb usb6: default language 0x0409
[   26.237293] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[   26.237294] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.237295] usb usb6: Product: xHCI Host Controller
[   26.237296] usb usb6: Manufacturer: Linux 6.2.6-gentoo-x86_64 xhci-hcd
[   26.237296] usb usb6: SerialNumber: 0000:04:00.0
[   26.237376] usb usb6: usb_probe_device
[   26.237378] xHCI xhci_add_endpoint called for root hub
[   26.237379] xHCI xhci_check_bandwidth called for root hub
[   26.237384] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[   26.237395] hub 6-0:1.0: usb_probe_interface
[   26.237396] hub 6-0:1.0: usb_probe_interface - got id
[   26.237397] hub 6-0:1.0: USB hub found
[   26.237402] hub 6-0:1.0: 2 ports detected
[   26.237439] usb usb6-port1: peered to usb2-port1
[   26.237466] usb usb6-port2: peered to usb2-port2
[   26.237469] usb usb6: port-1 disable U1/U2 _DSM: -19
[   26.237471] usb usb6: port-2 disable U1/U2 _DSM: -19
[   26.237506] xhci_hcd 0000:04:00.0: vgaarb: pci_notify
[   26.238074] UDC core: g_multi: couldn't find an available UDC
[   26.279739] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.280117] i8042: PNP: No PS/2 controller found.
[   26.336141] xhci_hcd 0000:00:14.0: Port change event, 3-6, id 6, portsc: 0x200a03
[   26.337149] mousedev: PS/2 mouse device common for all mice
[   26.337949] xhci_hcd 0000:00:14.0: handle_port_status: starting usb3 port polling.
[   26.339141] rtc_cmos 00:03: RTC can wake from S4
[   26.383400] rtc rtc0: alarm rollover: day
[   26.384507] rtc_cmos 00:03: char device (252:0)
[   26.385431] rtc_cmos 00:03: registered as rtc0
[   26.386477] rtc_cmos 00:03: setting system clock to 2023-03-15T17:15:14 UTC (1678900514)
[   26.387418] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
[   26.388351] i2c-core: driver [smbus_alert] registered
[   26.389278] i2c_dev: i2c /dev entries driver
[   26.390247] i2c_dev: adapter [i915 gmbus dpc] registered as minor 0
[   26.391217] i2c_dev: adapter [i915 gmbus dpb] registered as minor 1
[   26.392183] i2c_dev: adapter [i915 gmbus dpd] registered as minor 2
[   26.393190] i2c_dev: adapter [AUX B/DDI B/PHY B] registered as minor 3
[   26.394135] i801_smbus 0000:00:1f.4: vgaarb: pci_notify
[   26.394168] i2c-core: driver [sbsm] registered
[   26.395381] i801_smbus 0000:00:1f.4: runtime IRQ mapping not provided by arch
[   26.397698] Driver 'corsair-psu' was unable to register with bus_type 'hid' because the bus was not initialized.
[   26.397724] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   26.399079] i2c-core: driver [jc42] registered
[   26.400337] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   26.401655] nct6775: Enabling hardware monitor logical device mappings.
[   26.402866] pci 0000:00:1f.1: [8086:a2a0] type 00 class 0x058000
[   26.404220] nct6775: Found NCT6793D or compatible chip at 0x2e:0x290
[   26.405519] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit]
[   26.406398] usb 3-6: new low-speed USB device number 2 using xhci_hcd
[   26.406401] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.406768] ACPI Warning: 
[   26.407264] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   26.411968] SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_GPE.HWM) (20221020/utaddress-204)
[   26.412967] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   26.413031] pci 0000:00:1f.1: vgaarb: pci_notify
[   26.414361] i2c-core: driver [nct6775-i2c] registered
[   26.415644] pci 0000:00:1f.1: PME# disabled
[   26.418053] pci 0000:00:1f.1: vgaarb: pci_notify
[   26.419128] pci 0000:00:1f.1: vgaarb: pci_notify
[   26.419180] iTCO_vendor_support: vendor-support=0
[   26.420555] pci 0000:00:1f.1: device released
[   26.421661] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[   26.422629] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[   26.423598] softdog:              soft_reboot_cmd=<not set> soft_active_on_boot=0
[   26.423610] device-mapper: uevent: version 1.0.3
[   26.424711] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   26.425665] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
[   26.426720] i2c_dev: adapter [SMBus I801 adapter at f040] registered as minor 4
[   26.427715] intel_pstate: Intel P-state driver initializing
[   26.428682] i2c i2c-4: adapter [SMBus I801 adapter at f040] registered
[   26.431958] intel_pstate: Disabling energy efficiency optimization
[   26.432366] i2c i2c-4: found normal entry for adapter 4, addr 0x18
[   26.432770] intel_pstate: HWP enabled
[   26.432991] ccp_crypto: Cannot load: there are no available CCPs
[   26.436492] i2c i2c-4: Creating jc42 at 0x18
[   26.437378] jc42 4-0018: probe
[   26.437494] hid: raw HID events driver (C) Jiri Kosina
[   26.439110] usbcore: registered new interface driver usbhid
[   26.439584] i2c i2c-4: client [jc42] registered with bus id 4-0018
[   26.439938] usbhid: USB HID core driver
[   26.440769] i2c i2c-4: found normal entry for adapter 4, addr 0x19
[   26.441620] hdaps: supported laptop not found!
[   26.443265] hdaps: driver init failed (ret=-19)!
[   26.444113] resource: resource sanity check: requesting [mem 0x00000000fdffe800-0x00000000fe0007ff], which spans more than pnp 00:06 [mem 0xfdb00000-0xfdffffff]
[   26.444954] caller pmc_core_probe+0xca/0x530 mapping multiple BARs
[   26.445292] i2c i2c-4: Creating jc42 at 0x19
[   26.445805] intel_pmc_core INT33A1:00:  initialized
[   26.446669] jc42 4-0019: probe
[   26.448322] intel_rapl_common: Found RAPL domain package
[   26.449158] intel_rapl_common: Found RAPL domain core
[   26.450069] intel_rapl_common: Found RAPL domain uncore
[   26.450941] intel_rapl_common: Found RAPL domain dram
[   26.451075] i2c i2c-4: client [jc42] registered with bus id 4-0019
[   26.452880] i2c i2c-4: found normal entry for adapter 4, addr 0x1a
[   26.454042] snd_hda_intel 0000:00:1f.3: vgaarb: pci_notify
[   26.454955] snd_hda_intel 0000:00:1f.3: runtime IRQ mapping not provided by arch
[   26.455940] snd_hda_intel 0000:00:1f.3: vgaarb: pci_notify
[   26.456586] i2c i2c-4: Creating jc42 at 0x1a
[   26.456844] snd_hda_intel 0000:01:00.1: vgaarb: pci_notify
[   26.457749] jc42 4-001a: probe
[   26.458624] snd_hda_intel 0000:01:00.1: runtime IRQ mapping not provided by arch
[   26.460510] snd_hda_intel 0000:01:00.1: Disabling MSI
[   26.460849] i2c i2c-4: client [jc42] registered with bus id 4-001a
[   26.461410] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   26.462317] i2c i2c-4: found normal entry for adapter 4, addr 0x1b
[   26.462374] xhci_hcd 0000:00:14.0: Port change event, 3-6, id 6, portsc: 0x200a03
[   26.462377] xhci_hcd 0000:00:14.0: handle_port_status: starting usb3 port polling.
[   26.463233] snd_hda_intel 0000:01:00.1: vgaarb: pci_notify
[   26.466971] GACT probability on
[   26.467013] i2c i2c-4: Creating jc42 at 0x1b
[   26.467887] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
[   26.468787] jc42 4-001b: probe
[   26.469707] u32 classifier
[   26.471518]     Performance counters on
[   26.472446]     input device check on
[   26.472502] i2c i2c-4: client [jc42] registered with bus id 4-001b
[   26.473364]     Actions configured
[   26.473977] xt_time: kernel timezone is -0000
[   26.474279] i2c i2c-4: found normal entry for adapter 4, addr 0x1c
[   26.475272] NET: Registered PF_PACKET protocol family
[   26.477153] i801_smbus 0000:00:1f.4: No response
[   26.478979] i2c i2c-4: found normal entry for adapter 4, addr 0x1d
[   26.480180] i801_smbus 0000:00:1f.4: No response
[   26.481110] i2c i2c-4: found normal entry for adapter 4, addr 0x1e
[   26.482024] microcode: Microcode Update Driver: v2.2.
[   26.482027] IPI shorthand broadcast: enabled
[   26.482258] i801_smbus 0000:00:1f.4: No response
[   26.482974] AVX2 version of gcm_enc/dec engaged.
[   26.483871] i2c i2c-4: found normal entry for adapter 4, addr 0x1f
[   26.486835] i801_smbus 0000:00:1f.4: No response
[   26.487765] AES CTR mode by8 optimization enabled
[   26.487784] i2c i2c-4: 4/4 memory slots populated (from DMI)
[   26.489862] i2c i2c-4: client [ee1004] registered with bus id 4-0050
[   26.490729] i2c i2c-4: Successfully instantiated SPD at 0x50
[   26.490861] sched_clock: Marking stable (26454208323, 35488206)->(26541014051, -51317522)
[   26.491928] i2c i2c-4: client [ee1004] registered with bus id 4-0051
[   26.493343] i2c i2c-4: Successfully instantiated SPD at 0x51
[   26.494404] registered taskstats version 1
[   26.494557] i2c i2c-4: client [ee1004] registered with bus id 4-0052
[   26.495582] Loading compiled-in X.509 certificates
[   26.496693] i2c i2c-4: Successfully instantiated SPD at 0x52
[   26.497212] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
[   26.497250] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[   26.497287] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[   26.497304] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[   26.497875] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   26.499056] i2c i2c-4: client [ee1004] registered with bus id 4-0053
[   26.499602] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   26.499603] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   26.501142] i2c i2c-4: Successfully instantiated SPD at 0x53
[   26.501273] zswap: loaded using pool zstd/z3fold
[   26.502012] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   26.502013] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   26.503153] i801_smbus 0000:00:1f.4: vgaarb: pci_notify
[   26.504022] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   26.505748] Key type .fscrypt registered
[   26.506435] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   26.506436] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   26.506437] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   26.507324] Key type fscrypt-provisioning registered
[   26.517438] Btrfs loaded, crc32c=crc32c-intel, zoned=no, fsverity=no
[   26.523497] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[   26.524459] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[   26.525410] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[   26.526378] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   26.527332] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   26.528286] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   26.529240] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[   26.529829] alg: No test for 842 (842-scomp)
[   26.530227] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[   26.531203] alg: No test for 842 (842-generic)
[   26.532102] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[   26.533064] xhci_hcd 0000:00:14.0: Resetting device with slot ID 1
[   26.534006] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[   26.534941] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.536855] xhci_hcd 0000:00:14.0: Completed reset device command.
[   26.538139] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 1) in default state
[   26.539088] xhci_hcd 0000:00:14.0: Not freeing device rings.
[   26.540040] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.559663] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   26.560626] usb 3-6: default language 0x0409
[   26.562717] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   26.563689] usb 3-6: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[   26.564642] usb 3-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   26.565589] usb 3-6: Product: USB Optical Mouse
[   26.566791] usb 3-6: usb_probe_device
[   26.567742] xhci_hcd 0000:00:14.0: add ep 0x81, slot id 1, new drop flags = 0x0, new add flags = 0x8
[   26.568697] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev (____ptrval____)
[   26.569652] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.570859] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.571833] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 2
[   26.572795] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.576494] usb 3-6: adding 3-6:1.0 (config #1, interface 0)
[   26.577537] usbhid 3-6:1.0: usb_probe_interface
[   26.578498] usbhid 3-6:1.0: usb_probe_interface - got id
[   26.581748] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:1BCF:0005.0001/input/input18
[   26.582810] hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-6/input0
[   26.583832] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.605694] printk: console [netcon0] enabled
[   26.606673] netconsole: network logging started
[   26.607684] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   26.608770] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   26.609756] Loading firmware: regulatory.db
[   26.610738] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   26.611717] cfg80211: failed to load regulatory.db
[   26.612704] ALSA device list:
[   26.613695]   #0: HDA Intel PCH at 0x2fff020000 irq 141
[   26.614684]   #1: HDA NVidia at 0xdf080000 irq 17
[   26.615670] KTAP version 1
[   26.616656] 1..15
[   26.617687]     KTAP version 1
[   26.618669]     # Subtest: cpumask
[   26.618670]     1..6
[   26.619779]     ok 1 test_cpumask_weight
[   26.620888]     ok 2 test_cpumask_first
[   26.621944]     ok 3 test_cpumask_last
[   26.622989]     ok 4 test_cpumask_next
[   26.624038]     ok 5 test_cpumask_iterators
[   26.625080]     ok 6 test_cpumask_iterators_builtin
[   26.626056] # cpumask: pass:6 fail:0 skip:0 total:6
[   26.627031] # Totals: pass:6 fail:0 skip:0 total:6
[   26.627999] ok 1 cpumask
[   26.629942]     KTAP version 1
[   26.630908]     # Subtest: hash
[   26.630908]     1..2
[   26.632259]     ok 1 test_string_or
[   26.635400]     ok 2 test_hash_or
[   26.636373] # hash: pass:2 fail:0 skip:0 total:2
[   26.637330] # Totals: pass:2 fail:0 skip:0 total:2
[   26.638288] ok 2 hash
[   26.639852] xhci_hcd 0000:00:14.0: Port change event, 3-11, id 11, portsc: 0x200603
[   26.640211]     KTAP version 1
[   26.641175] xhci_hcd 0000:00:14.0: handle_port_status: starting usb3 port polling.
[   26.642147]     # Subtest: list_sort
[   26.643125]     1..1
[   26.645327]     ok 1 list_sort_test
[   26.646307] ok 3 list_sort
[   26.648233]     KTAP version 1
[   26.649188]     # Subtest: lib_sort
[   26.649189]     1..1
[   26.650321]     ok 1 test_sort
[   26.651278] ok 4 lib_sort
[   26.653180]     KTAP version 1
[   26.654127]     # Subtest: rational
[   26.654127]     1..1
[   26.655067]         KTAP version 1
[   26.656950]         # Subtest: rational_test
[   26.657067]         ok 1 Exceeds bounds, semi-convergent term > 1/2 last term
[   26.658124]         ok 2 Exceeds bounds, semi-convergent term < 1/2 last term
[   26.659189]         ok 3 Closest to zero
[   26.660196]         ok 4 Closest to smallest non-zero
[   26.661184]         ok 5 Use convergent
[   26.662170]         ok 6 Exact answer
[   26.663173]         ok 7 Semiconvergent, numerator limit
[   26.664162]         ok 8 Semiconvergent, denominator limit
[   26.665090]     # rational_test: pass:8 fail:0 skip:0 total:8
[   26.666017]     ok 1 rational_test
[   26.666949] # Totals: pass:8 fail:0 skip:0 total:8
[   26.667873] ok 5 rational
[   26.669725]     KTAP version 1
[   26.670642]     # Subtest: bitfields
[   26.670643]     1..2
[   26.671654]     ok 1 test_bitfields_constants
[   26.672639]     ok 2 test_bitfields_variables
[   26.673160] xhci_hcd 0000:01:00.2: config port 5-1 wake bits, portsc: 0xa0002a0, write: 0xa0202a0
[   26.673556] # bitfields: pass:2 fail:0 skip:0 total:2
[   26.674466] xhci_hcd 0000:01:00.2: config port 5-2 wake bits, portsc: 0xa0002a0, write: 0xa0202a0
[   26.675385] # Totals: pass:2 fail:0 skip:0 total:2
[   26.676302] xhci_hcd 0000:01:00.2: config port 5-3 wake bits, portsc: 0xa0002a0, write: 0xa0202a0
[   26.677228] ok 6 bitfields
[   26.678143] xhci_hcd 0000:01:00.2: config port 5-4 wake bits, portsc: 0xa0002a0, write: 0xa0202a0
[   26.679078]     KTAP version 1
[   26.679998] xhci_hcd 0000:01:00.2: config port 1-1 wake bits, portsc: 0xa0002a0, write: 0xa0202a0
[   26.680930]     # Subtest: list-kunit-test
[   26.681861] xhci_hcd 0000:01:00.2: config port 1-2 wake bits, portsc: 0xa0002a0, write: 0xa0202a0
[   26.682800]     1..39
[   26.683736] xhci_hcd 0000:01:00.2: xhci_suspend: stopping usb1 port polling.
[   26.684812]     ok 1 list_test_list_init
[   26.686692]     ok 2 list_test_list_add
[   26.686781] xhci_hcd 0000:01:00.2: hcd_pci_runtime_suspend: 0
[   26.687769]     ok 3 list_test_list_add_tail
[   26.688563] xhci_hcd 0000:01:00.2: saving config space at offset 0x0 (reading 0x1ad810de)
[   26.689573]     ok 4 list_test_list_del
[   26.690425] xhci_hcd 0000:01:00.2: saving config space at offset 0x4 (reading 0x100402)
[   26.691431]     ok 5 list_test_list_replace
[   26.692295] xhci_hcd 0000:01:00.2: saving config space at offset 0x8 (reading 0xc0330a1)
[   26.693310]     ok 6 list_test_list_replace_init
[   26.694176] xhci_hcd 0000:01:00.2: saving config space at offset 0xc (reading 0x800010)
[   26.695240]     ok 7 list_test_list_swap
[   26.696067] xhci_hcd 0000:01:00.2: saving config space at offset 0x10 (reading 0xf200000c)
[   26.697138]     ok 8 list_test_list_del_init
[   26.697974] xhci_hcd 0000:01:00.2: saving config space at offset 0x14 (reading 0x2f)
[   26.699008]     ok 9 list_test_list_del_init_careful
[   26.699893] xhci_hcd 0000:01:00.2: saving config space at offset 0x18 (reading 0x0)
[   26.700927]     ok 10 list_test_list_move
[   26.701814] xhci_hcd 0000:01:00.2: saving config space at offset 0x1c (reading 0xf204000c)
[   26.702849]     ok 11 list_test_list_move_tail
[   26.703744] xhci_hcd 0000:01:00.2: saving config space at offset 0x20 (reading 0x2f)
[   26.704789]     ok 12 list_test_list_bulk_move_tail
[   26.705668] xhci_hcd 0000:01:00.2: saving config space at offset 0x24 (reading 0x0)
[   26.706389] usb 3-11: new full-speed USB device number 3 using xhci_hcd
[   26.706392] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.706559] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   26.706762]     ok 13 list_test_list_is_head
[   26.707603] xhci_hcd 0000:01:00.2: saving config space at offset 0x28 (reading 0x0)
[   26.708680]     ok 14 list_test_list_is_first
[   26.709541] xhci_hcd 0000:01:00.2: saving config space at offset 0x2c (reading 0x134d10de)
[   26.710595]     ok 15 list_test_list_is_last
[   26.711488] xhci_hcd 0000:01:00.2: saving config space at offset 0x30 (reading 0x0)
[   26.712536]     ok 16 list_test_list_empty
[   26.713434] xhci_hcd 0000:01:00.2: saving config space at offset 0x34 (reading 0x68)
[   26.714476]     ok 17 list_test_list_empty_careful
[   26.715380] xhci_hcd 0000:01:00.2: saving config space at offset 0x38 (reading 0x0)
[   26.716464]     ok 18 list_test_list_rotate_left
[   26.717331] xhci_hcd 0000:01:00.2: saving config space at offset 0x3c (reading 0x30f)
[   26.718395]     ok 19 list_test_list_rotate_to_front
[   26.719315] xhci_hcd 0000:01:00.2: PME# enabled
[   26.720363]     ok 20 list_test_list_is_singular
[   26.725318]     ok 21 list_test_list_cut_position
[   26.726450]     ok 22 list_test_list_cut_before
[   26.727509]     ok 23 list_test_list_splice
[   26.728555]     ok 24 list_test_list_splice_tail
[   26.729603]     ok 25 list_test_list_splice_init
[   26.730650]     ok 26 list_test_list_splice_tail_init
[   26.731746]     ok 27 list_test_list_entry
[   26.732791]     ok 28 list_test_list_entry_is_head
[   26.733836]     ok 29 list_test_list_first_entry
[   26.734870]     ok 30 list_test_list_last_entry
[   26.735906]     ok 31 list_test_list_first_entry_or_null
[   26.736942]     ok 32 list_test_list_next_entry
[   26.738023]     ok 33 list_test_list_prev_entry
[   26.739066]     ok 34 list_test_list_for_each
[   26.740103]     ok 35 list_test_list_for_each_prev
[   26.741134]     ok 36 list_test_list_for_each_safe
[   26.742160]     ok 37 list_test_list_for_each_prev_safe
[   26.743231]     ok 38 list_test_list_for_each_entry
[   26.744256]     ok 39 list_test_list_for_each_entry_reverse
[   26.745207] # list-kunit-test: pass:39 fail:0 skip:0 total:39
[   26.746153] # Totals: pass:39 fail:0 skip:0 total:39
[   26.747111] ok 7 list-kunit-test
[   26.749011]     KTAP version 1
[   26.749958]     # Subtest: hlist
[   26.749958]     1..18
[   26.750960]     ok 1 hlist_test_init
[   26.751960]     ok 2 hlist_test_unhashed
[   26.752961]     ok 3 hlist_test_unhashed_lockless
[   26.753960]     ok 4 hlist_test_del
[   26.754953]     ok 5 hlist_test_del_init
[   26.755943]     ok 6 hlist_test_add
[   26.756947]     ok 7 hlist_test_fake
[   26.757988]     ok 8 hlist_test_is_singular_node
[   26.759014]     ok 9 hlist_test_empty
[   26.760008]     ok 10 hlist_test_move_list
[   26.760995]     ok 11 hlist_test_entry
[   26.761598] xhci_hcd 0000:00:14.0: Port change event, 3-11, id 11, portsc: 0x200603
[   26.761984]     ok 12 hlist_test_entry_safe
[   26.762856] xhci_hcd 0000:00:14.0: handle_port_status: starting usb3 port polling.
[   26.763860]     ok 13 hlist_test_for_each
[   26.765710]     ok 14 hlist_test_for_each_safe
[   26.766702]     ok 15 hlist_test_for_each_entry
[   26.767693]     ok 16 hlist_test_for_each_entry_continue
[   26.768675]     ok 17 hlist_test_for_each_entry_from
[   26.769658]     ok 18 hlist_test_for_each_entry_safe
[   26.770578] # hlist: pass:18 fail:0 skip:0 total:18
[   26.771492] # Totals: pass:18 fail:0 skip:0 total:18
[   26.772403] ok 8 hlist
[   26.774217]     KTAP version 1
[   26.775117]     # Subtest: linear-ranges-test
[   26.775118]     1..4
[   26.776107]     ok 1 range_test_get_value_amount
[   26.777076]     ok 2 range_test_get_selector_high
[   26.778038]     ok 3 range_test_get_selector_low
[   26.778995]     ok 4 range_test_get_value
[   26.779892] # linear-ranges-test: pass:4 fail:0 skip:0 total:4
[   26.780779] # Totals: pass:4 fail:0 skip:0 total:4
[   26.781668] ok 9 linear-ranges-test
[   26.783448]     KTAP version 1
[   26.784332]     # Subtest: bits-test
[   26.784332]     1..3
[   26.785275]     ok 1 genmask_test
[   26.786240]     ok 2 genmask_ull_test
[   26.787191]     ok 3 genmask_input_check_test
[   26.788069] # bits-test: pass:3 fail:0 skip:0 total:3
[   26.788941] # Totals: pass:3 fail:0 skip:0 total:3
[   26.789812] ok 10 bits-test
[   26.791555]     KTAP version 1
[   26.792420]     # Subtest: cmdline
[   26.792421]     1..4
[   26.793369]     ok 1 cmdline_test_noint
[   26.794329]     ok 2 cmdline_test_lead_int
[   26.795273]     ok 3 cmdline_test_tail_int
[   26.796199]     ok 4 cmdline_test_range
[   26.797056] # cmdline: pass:4 fail:0 skip:0 total:4
[   26.797907] # Totals: pass:4 fail:0 skip:0 total:4
[   26.798753] ok 11 cmdline
[   26.800443]     KTAP version 1
[   26.801286]     # Subtest: slub_test
[   26.801286]     1..6
[   26.802386]     ok 1 test_clobber_zone
[   26.803319]     ok 2 test_next_pointer
[   26.804244]     ok 3 test_first_word
[   26.805165]     ok 4 test_clobber_50th_byte
[   26.806079]     ok 5 test_clobber_redzone_free
[   26.806999]     ok 6 test_kmalloc_redzone_access
[   26.807825] # slub_test: pass:6 fail:0 skip:0 total:6
[   26.808647] # Totals: pass:6 fail:0 skip:0 total:6
[   26.809469] ok 12 slub_test
[   26.811120]     KTAP version 1
[   26.811944]     # Subtest: memcpy
[   26.811945]     1..7
[   26.812831]     # memset_test: ok: memset() direct assignment
[   26.814506]     # memset_test: ok: memset() complete overwrite
[   26.815333]     # memset_test: ok: memset() middle overwrite
[   26.816159]     # memset_test: ok: memset() argument side-effects
[   26.816987]     # memset_test: ok: memset() memset_after()
[   26.817812]     # memset_test: ok: memset() memset_startat()
[   26.818637]     ok 1 memset_test
[   26.818732]     # memcpy_test: ok: memcpy() static initializers
[   26.820396]     # memcpy_test: ok: memcpy() direct assignment
[   26.821223]     # memcpy_test: ok: memcpy() complete overwrite
[   26.822050]     # memcpy_test: ok: memcpy() middle overwrite
[   26.822875]     # memcpy_test: ok: memcpy() argument side-effects
[   26.823728]     ok 2 memcpy_test
[   26.829726] xhci_hcd 0000:00:14.0: Resetting device with slot ID 2
[   26.831384] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.832217] xhci_hcd 0000:00:14.0: Completed reset device command.
[   26.833050] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 2) in default state
[   26.833877] xhci_hcd 0000:00:14.0: Not freeing device rings.
[   26.834697] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.849735] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.851327] xhci_hcd 0000:00:14.0: Stalled endpoint for slot 2 ep 0
[   26.852153] xhci_hcd 0000:00:14.0: Hard-reset ep 0, slot 2
[   26.852972] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.853797] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.854617] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB (____ptrval____) TD as cancel_status is 2
[   26.855444] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB (____ptrval____) TD
[   26.856273] xhci_hcd 0000:00:14.0: Giveback URB (____ptrval____), len = 0, expected = 10, status = -32
[   26.857220] xhci_hcd 0000:00:14.0: Stalled endpoint for slot 2 ep 0
[   26.858060] xhci_hcd 0000:00:14.0: Hard-reset ep 0, slot 2
[   26.858893] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.859738] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.860574] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB (____ptrval____) TD as cancel_status is 2
[   26.861415] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB (____ptrval____) TD
[   26.862257] xhci_hcd 0000:00:14.0: Giveback URB (____ptrval____), len = 0, expected = 10, status = -32
[   26.863292] xhci_hcd 0000:00:14.0: Stalled endpoint for slot 2 ep 0
[   26.864139] xhci_hcd 0000:00:14.0: Hard-reset ep 0, slot 2
[   26.864980] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.865828] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.866673] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB (____ptrval____) TD as cancel_status is 2
[   26.867523] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB (____ptrval____) TD
[   26.868372] xhci_hcd 0000:00:14.0: Giveback URB (____ptrval____), len = 0, expected = 10, status = -32
[   26.871037] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   26.871901] usb 3-11: default language 0x0409
[   26.873820] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   26.876113] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   26.876979] usb 3-11: New USB device found, idVendor=1b1c, idProduct=1c06, bcdDevice= 0.02
[   26.877836] usb 3-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   26.878691] usb 3-11: Product:                       
[   26.879553] usb 3-11: Manufacturer:                          
[   26.880523] usb 3-11: usb_probe_device
[   26.881380] xhci_hcd 0000:00:14.0: add ep 0x81, slot id 2, new drop flags = 0x0, new add flags = 0x9
[   26.882236] xhci_hcd 0000:00:14.0: add ep 0x1, slot id 2, new drop flags = 0x0, new add flags = 0xd
[   26.883091] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev (____ptrval____)
[   26.883940] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.885077] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.885936] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 2
[   26.886784] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.887917] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.888762] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 1
[   26.889599] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.890892] usb 3-11: adding 3-11:1.0 (config #1, interface 0)
[   26.891785] usbhid 3-11:1.0: usb_probe_interface
[   26.892608] usbhid 3-11:1.0: usb_probe_interface - got id
[   26.894624] hid-generic 0003:1B1C:1C06.0002: hiddev96,hidraw1: USB HID v1.11 Device [                                                ] on usb-0000:00:14.0-11/input0
[   26.895493] xhci_hcd 0000:00:14.0: // Ding dong!
[   26.951387] xhci_hcd 0000:00:14.0: Port change event, 3-13, id 13, portsc: 0x200603
[   26.952224] xhci_hcd 0000:00:14.0: handle_port_status: starting usb3 port polling.
[   26.980092]     ok 3 memcpy_large_test
[   26.980187]     # memmove_test: ok: memmove() static initializers
[   26.981843]     # memmove_test: ok: memmove() direct assignment
[   26.982664]     # memmove_test: ok: memmove() complete overwrite
[   26.983484]     # memmove_test: ok: memmove() middle overwrite
[   26.984298]     # memmove_test: ok: memmove() argument side-effects
[   26.985106]     # memmove_test: ok: memmove() overlapping write
[   26.985932]     ok 4 memmove_test
[   27.019724] usb 3-13: new full-speed USB device number 4 using xhci_hcd
[   27.021332] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.022307] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   27.078141] xhci_hcd 0000:00:14.0: Port change event, 3-13, id 13, portsc: 0x200603
[   27.078948] xhci_hcd 0000:00:14.0: handle_port_status: starting usb3 port polling.
[   27.142176]     ok 5 memmove_large_test
[   27.146394] xhci_hcd 0000:00:14.0: Resetting device with slot ID 3
[   27.147985] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.148779] xhci_hcd 0000:00:14.0: Completed reset device command.
[   27.149574] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 3) in default state
[   27.150365] xhci_hcd 0000:00:14.0: Not freeing device rings.
[   27.151150] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.166401] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.169181] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   27.169977] usb 3-13: default language 0x0409
[   27.171265] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   27.172472] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   27.173261] usb 3-13: New USB device found, idVendor=1532, idProduct=0109, bcdDevice= b.62
[   27.174040] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   27.174811] usb 3-13: Product: Razer Lycosa
[   27.175579] usb 3-13: Manufacturer: Razer
[   27.176462] usb 3-13: usb_probe_device
[   27.177231] xhci_hcd 0000:00:14.0: add ep 0x81, slot id 3, new drop flags = 0x0, new add flags = 0x9
[   27.178000] xhci_hcd 0000:00:14.0: add ep 0x82, slot id 3, new drop flags = 0x0, new add flags = 0x29
[   27.178761] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev (____ptrval____)
[   27.179523] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.180640] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.181416] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 3 ep 2
[   27.182180] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.183289] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.184066] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 3 ep 4
[   27.184837] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.185997] usb 3-13: adding 3-13:1.0 (config #1, interface 0)
[   27.186838] usbhid 3-13:1.0: usb_probe_interface
[   27.187609] usbhid 3-13:1.0: usb_probe_interface - got id
[   27.190619] input: Razer Razer Lycosa as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/0003:1532:0109.0003/input/input19
[   27.246566] hid-generic 0003:1532:0109.0003: input,hidraw2: USB HID v1.10 Keyboard [Razer Razer Lycosa] on usb-0000:00:14.0-13/input0
[   27.247370] usb 3-13: adding 3-13:1.1 (config #1, interface 1)
[   27.248216] usbhid 3-13:1.1: usb_probe_interface
[   27.249002] usbhid 3-13:1.1: usb_probe_interface - got id
[   27.250958] input: Razer Razer Lycosa Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.1/0003:1532:0109.0004/input/input20
[   27.306461] input: Razer Razer Lycosa System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.1/0003:1532:0109.0004/input/input21
[   27.307368] hid-generic 0003:1532:0109.0004: input,hidraw3: USB HID v1.10 Device [Razer Razer Lycosa] on usb-0000:00:14.0-13/input1
[   27.308209] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.364079] xhci_hcd 0000:00:14.0: Port change event, 3-14, id 14, portsc: 0x200a03
[   27.364903] xhci_hcd 0000:00:14.0: handle_port_status: starting usb3 port polling.
[   27.429720] usb 3-14: new low-speed USB device number 5 using xhci_hcd
[   27.430544] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.432095] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   27.487956] xhci_hcd 0000:00:14.0: Port change event, 3-14, id 14, portsc: 0x200a03
[   27.488782] xhci_hcd 0000:00:14.0: handle_port_status: starting usb3 port polling.
[   27.493635]     ok 6 memmove_overlap_test
[   27.493789]     ok 7 strtomem_test
[   27.494621] # memcpy: pass:7 fail:0 skip:0 total:7
[   27.495449] # Totals: pass:7 fail:0 skip:0 total:7
[   27.496284] ok 13 memcpy
[   27.497954]     KTAP version 1
[   27.498785]     # Subtest: overflow
[   27.498786]     1..21
[   27.499698]     # u8_u8__u8_overflow_test: 18 u8_u8__u8 arithmetic tests finished
[   27.501367]     ok 1 u8_u8__u8_overflow_test
[   27.501429]     # s8_s8__s8_overflow_test: 19 s8_s8__s8 arithmetic tests finished
[   27.503132]     ok 2 s8_s8__s8_overflow_test
[   27.503229]     # u16_u16__u16_overflow_test: 17 u16_u16__u16 arithmetic tests finished
[   27.504916]     ok 3 u16_u16__u16_overflow_test
[   27.505014]     # s16_s16__s16_overflow_test: 17 s16_s16__s16 arithmetic tests finished
[   27.506728]     ok 4 s16_s16__s16_overflow_test
[   27.506827]     # u32_u32__u32_overflow_test: 17 u32_u32__u32 arithmetic tests finished
[   27.508542]     ok 5 u32_u32__u32_overflow_test
[   27.508640]     # s32_s32__s32_overflow_test: 17 s32_s32__s32 arithmetic tests finished
[   27.510363]     ok 6 s32_s32__s32_overflow_test
[   27.510459]     # u64_u64__u64_overflow_test: 17 u64_u64__u64 arithmetic tests finished
[   27.512198]     ok 7 u64_u64__u64_overflow_test
[   27.512301]     # s64_s64__s64_overflow_test: 21 s64_s64__s64 arithmetic tests finished
[   27.514051]     ok 8 s64_s64__s64_overflow_test
[   27.514150]     # u32_u32__int_overflow_test: 2 u32_u32__int arithmetic tests finished
[   27.515904]     ok 9 u32_u32__int_overflow_test
[   27.516000]     # u32_u32__u8_overflow_test: 3 u32_u32__u8 arithmetic tests finished
[   27.517791]     ok 10 u32_u32__u8_overflow_test
[   27.517887]     # u8_u8__int_overflow_test: 3 u8_u8__int arithmetic tests finished
[   27.519669]     ok 11 u8_u8__int_overflow_test
[   27.519785]     # int_int__u8_overflow_test: 3 int_int__u8 arithmetic tests finished
[   27.521575]     ok 12 int_int__u8_overflow_test
[   27.521672]     # shift_sane_test: 36 sane shift tests finished
[   27.523507]     ok 13 shift_sane_test
[   27.523613]     # shift_overflow_test: 25 overflow shift tests finished
[   27.525420]     ok 14 shift_overflow_test
[   27.525517]     # shift_truncate_test: 27 truncate shift tests finished
[   27.527324]     ok 15 shift_truncate_test
[   27.527421]     # shift_nonsense_test: 25 nonsense shift tests finished
[   27.529252]     ok 16 shift_nonsense_test
[   27.529345]     # overflow_allocation_test: 11 allocation overflow tests finished
[   27.531163]     ok 17 overflow_allocation_test
[   27.531262]     # overflow_size_helpers_test: 43 overflow size helper tests finished
[   27.533131]     ok 18 overflow_size_helpers_test
[   27.533228]     # overflows_type_test: 658 overflows_type() tests finished
[   27.535073]     ok 19 overflows_type_test
[   27.535174]     # same_type_test: 0 __same_type() tests finished
[   27.537070]     ok 20 same_type_test
[   27.537165]     # castable_to_type_test: 103 castable_to_type() tests finished
[   27.539059]     ok 21 castable_to_type_test
[   27.539061] # overflow: pass:21 fail:0 skip:0 total:21
[   27.540061] # Totals: pass:21 fail:0 skip:0 total:21
[   27.541047] ok 14 overflow
[   27.543025]     KTAP version 1
[   27.544013]     # Subtest: stackinit
[   27.544014]     1..65
[   27.545141]     ok 1 test_u8_zero
[   27.546232]     ok 2 test_u16_zero
[   27.547371]     ok 3 test_u32_zero
[   27.548508]     ok 4 test_u64_zero
[   27.549566]     ok 5 test_char_array_zero
[   27.550616]     ok 6 test_small_hole_zero
[   27.551665]     ok 7 test_big_hole_zero
[   27.552733]     ok 8 test_trailing_hole_zero
[   27.553064] xhci_hcd 0000:00:14.0: Resetting device with slot ID 4
[   27.553846]     ok 9 test_packed_zero
[   27.554720] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.555834]     ok 10 test_small_hole_dynamic_partial
[   27.556722] xhci_hcd 0000:00:14.0: Completed reset device command.
[   27.557793]     ok 11 test_big_hole_dynamic_partial
[   27.558725] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 4) in default state
[   27.559800]     ok 12 test_trailing_hole_dynamic_partial
[   27.560734] xhci_hcd 0000:00:14.0: Not freeing device rings.
[   27.561815]     ok 13 test_packed_dynamic_partial
[   27.562761] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.563854]     ok 14 test_small_hole_assigned_dynamic_partial
[   27.565885]     ok 15 test_big_hole_assigned_dynamic_partial
[   27.567063]     ok 16 test_trailing_hole_assigned_dynamic_partial
[   27.568206]     ok 17 test_packed_assigned_dynamic_partial
[   27.569296]     ok 18 test_small_hole_static_partial
[   27.570430]     ok 19 test_big_hole_static_partial
[   27.571515]     ok 20 test_trailing_hole_static_partial
[   27.572566]     ok 21 test_packed_static_partial
[   27.573576]     ok 22 test_small_hole_static_all
[   27.574582]     ok 23 test_big_hole_static_all
[   27.575632]     ok 24 test_trailing_hole_static_all
[   27.576645]     ok 25 test_packed_static_all
[   27.577652]     ok 26 test_small_hole_dynamic_all
[   27.578659]     ok 27 test_big_hole_dynamic_all
[   27.579660]     ok 28 test_trailing_hole_dynamic_all
[   27.580668]     ok 29 test_packed_dynamic_all
[   27.581671]     ok 30 test_small_hole_runtime_partial
[   27.582667] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   27.582675]     ok 31 test_big_hole_runtime_partial
[   27.583621] usb 3-14: default language 0x0409
[   27.584665]     ok 32 test_trailing_hole_runtime_partial
[   27.586511]     ok 33 test_packed_runtime_partial
[   27.586669] xhci_hcd 0000:00:14.0: Waiting for status stage event
[   27.587518]     ok 34 test_small_hole_runtime_all
[   27.588401] usb 3-14: New USB device found, idVendor=1bcf, idProduct=0053, bcdDevice= 0.72
[   27.589407]     ok 35 test_big_hole_runtime_all
[   27.590282] usb 3-14: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   27.591294]     ok 36 test_trailing_hole_runtime_all
[   27.592177] usb 3-14: Product: USB Optical Mouse 
[   27.593222]     ok 37 test_packed_runtime_all
[   27.594181] usb 3-14: usb_probe_device
[   27.595077]     ok 38 test_small_hole_assigned_static_partial
[   27.595958] xhci_hcd 0000:00:14.0: add ep 0x81, slot id 4, new drop flags = 0x0, new add flags = 0x8
[   27.597003]     ok 39 test_big_hole_assigned_static_partial
[   27.597859] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev (____ptrval____)
[   27.598865]     ok 40 test_trailing_hole_assigned_static_partial
[   27.599769] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.600797]     ok 41 test_packed_assigned_static_partial
[   27.602083] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.602699]     ok 42 test_small_hole_assigned_static_all
[   27.603594] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 4 ep 2
[   27.604613]     ok 43 test_big_hole_assigned_static_all
[   27.605494] xhci_hcd 0000:00:14.0: // Ding dong!
[   27.606517]     ok 44 test_trailing_hole_assigned_static_all
[   27.608086] usb 3-14: adding 3-14:1.0 (config #1, interface 0)
[   27.608422]     ok 45 test_packed_assigned_static_all
[   27.609376] usbhid 3-14:1.0: usb_probe_interface
[   27.610333]     ok 46 test_small_hole_assigned_dynamic_all
[   27.611219] usbhid 3-14:1.0: usb_probe_interface - got id
[   27.612280]     ok 47 test_big_hole_assigned_dynamic_all
[   27.614160]     ok 48 test_trailing_hole_assigned_dynamic_all
[   27.615175]     ok 49 test_packed_assigned_dynamic_all
[   27.616188]     ok 50 test_small_hole_assigned_copy # SKIP XFAIL uninit bytes: 3
[   27.617427] input: USB Optical Mouse  Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:1BCF:0053.0005/input/input22
[   27.618167]     ok 51 test_big_hole_assigned_copy # SKIP XFAIL uninit bytes: 124
[   27.620077]     ok 52 test_trailing_hole_assigned_copy # SKIP XFAIL uninit bytes: 7
[   27.621097]     ok 53 test_packed_assigned_copy
[   27.621159]     ok 54 test_u8_none
[   27.622208]     ok 55 test_u16_none
[   27.623224]     ok 56 test_u32_none
[   27.624234]     ok 57 test_u64_none
[   27.625241]     ok 58 test_char_array_none
[   27.626245]     ok 59 test_switch_1_none # SKIP XFAIL uninit bytes: 80
[   27.628192]     ok 60 test_switch_2_none # SKIP XFAIL uninit bytes: 80
[   27.629202]     ok 61 test_small_hole_none
[   27.629271]     ok 62 test_big_hole_none
[   27.630285]     ok 63 test_trailing_hole_none
[   27.631290]     ok 64 test_packed_none
[   27.632301]     ok 65 test_user
[   27.633246] # stackinit: pass:60 fail:0 skip:5 total:65
[   27.634188] # Totals: pass:60 fail:0 skip:5 total:65
[   27.635128] ok 15 stackinit
[   27.637405] Freeing unused kernel image (initmem) memory: 1512K
[   27.669971] Write protecting the kernel read-only data: 32768k
[   27.671279] Freeing unused kernel image (rodata/data gap) memory: 552K
[   27.672809] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[   27.673158] input: USB Optical Mouse  Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:1BCF:0053.0005/input/input23
[   27.673815] rodata_test: all tests were successful
[   27.674867] hid-generic 0003:1BCF:0053.0005: input,hidraw4: USB HID v1.10 Keyboard [USB Optical Mouse ] on usb-0000:00:14.0-14/input0
[   27.675843] Run /init as init process
[   27.677874]   with arguments:
[   27.678888]     /init
[   27.679911]     nolvm
[   27.680925]     dobtrfs
[   27.681937]     nohibernate
[   27.682945]     nospectre_v2
[   27.683957]     nospec_store_bypass_disable
[   27.684964]     nopti
[   27.685969]     no_stf_barrier
[   27.686973]     noibrs
[   27.687976]     noibpb
[   27.688978]     noretpoline
[   27.689976]     noefi
[   27.690972]   with environment:
[   27.691964]     HOME=/
[   27.692955]     TERM=linux
[   27.693950]     BOOT_IMAGE=/boot/vmlinuz-6.2.6-gentoo-x86_64
[   27.694895]     root_trim=yes
[   27.695820]     enforcing=0
[   27.696747]     noexec=on
[   27.697669]     spectre_v2=off
[   27.698587]     pti=off
[   27.699503]     ssbd=force-off
[   27.700418]     spectre_v2_user=off
[   27.701335]     apparmor=0
[   27.702244]     page_owner=on
[   27.703149]     debug_pagealloc=on
[   27.704049]     numa_balancing=disable
[   27.704945]     numa=off
[   27.746371] i801_smbus 0000:00:1f.4: saving config space at offset 0x0 (reading 0xa2a38086)
[   27.747284] i801_smbus 0000:00:1f.4: saving config space at offset 0x4 (reading 0x2800003)
[   27.748183] i801_smbus 0000:00:1f.4: saving config space at offset 0x8 (reading 0xc050000)
[   27.749074] i801_smbus 0000:00:1f.4: saving config space at offset 0xc (reading 0x0)
[   27.749968] i801_smbus 0000:00:1f.4: saving config space at offset 0x10 (reading 0xff024004)
[   27.750856] i801_smbus 0000:00:1f.4: saving config space at offset 0x14 (reading 0x2f)
[   27.751741] i801_smbus 0000:00:1f.4: saving config space at offset 0x18 (reading 0x0)
[   27.752622] i801_smbus 0000:00:1f.4: saving config space at offset 0x1c (reading 0x0)
[   27.753505] i801_smbus 0000:00:1f.4: saving config space at offset 0x20 (reading 0xf041)
[   27.754383] i801_smbus 0000:00:1f.4: saving config space at offset 0x24 (reading 0x0)
[   27.755259] i801_smbus 0000:00:1f.4: saving config space at offset 0x28 (reading 0x0)
[   27.756132] i801_smbus 0000:00:1f.4: saving config space at offset 0x2c (reading 0x86941043)
[   27.757008] i801_smbus 0000:00:1f.4: saving config space at offset 0x30 (reading 0x0)
[   27.757879] i801_smbus 0000:00:1f.4: saving config space at offset 0x34 (reading 0x0)
[   27.758749] i801_smbus 0000:00:1f.4: saving config space at offset 0x38 (reading 0x0)
[   27.759616] i801_smbus 0000:00:1f.4: saving config space at offset 0x3c (reading 0x10b)
[   29.857729] snd_hda_intel 0000:01:00.1: saving config space at offset 0x0 (reading 0x10f810de)
[   29.862290] snd_hda_intel 0000:01:00.1: saving config space at offset 0x4 (reading 0x100006)
[   29.867163] snd_hda_intel 0000:01:00.1: saving config space at offset 0x8 (reading 0x40300a1)
[   29.872038] snd_hda_intel 0000:01:00.1: saving config space at offset 0xc (reading 0x800010)
[   29.876861] snd_hda_intel 0000:01:00.1: saving config space at offset 0x10 (reading 0xdf080000)
[   29.880814] snd_hda_intel 0000:01:00.1: saving config space at offset 0x14 (reading 0x0)
[   29.884049] snd_hda_intel 0000:01:00.1: saving config space at offset 0x18 (reading 0x0)
[   29.886480] snd_hda_intel 0000:01:00.1: saving config space at offset 0x1c (reading 0x0)
[   29.888886] snd_hda_intel 0000:01:00.1: saving config space at offset 0x20 (reading 0x0)
[   29.890831] snd_hda_intel 0000:01:00.1: saving config space at offset 0x24 (reading 0x0)
[   29.892731] snd_hda_intel 0000:01:00.1: saving config space at offset 0x28 (reading 0x0)
[   29.894539] snd_hda_intel 0000:01:00.1: saving config space at offset 0x2c (reading 0x134d10de)
[   29.896092] snd_hda_intel 0000:01:00.1: saving config space at offset 0x30 (reading 0x0)
[   29.897640] snd_hda_intel 0000:01:00.1: saving config space at offset 0x34 (reading 0x60)
[   29.899176] snd_hda_intel 0000:01:00.1: saving config space at offset 0x38 (reading 0x0)
[   29.900514] snd_hda_intel 0000:01:00.1: saving config space at offset 0x3c (reading 0x20a)
[   29.903039] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x0 (reading 0xa2f08086)
[   29.904347] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x4 (reading 0x100406)
[   29.905513] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x8 (reading 0x4030000)
[   29.906682] snd_hda_intel 0000:00:1f.3: saving config space at offset 0xc (reading 0x2010)
[   29.907840] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x10 (reading 0xff020004)
[   29.909000] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x14 (reading 0x2f)
[   29.910014] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x18 (reading 0x0)
[   29.911017] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x1c (reading 0x0)
[   29.912034] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x20 (reading 0xff000004)
[   29.913068] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x24 (reading 0x2f)
[   29.914095] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x28 (reading 0x0)
[   29.915021] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x2c (reading 0x87241043)
[   29.915942] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x30 (reading 0x0)
[   29.916858] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x34 (reading 0x50)
[   29.917772] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x38 (reading 0x0)
[   29.918673] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x3c (reading 0x10b)
[   29.919547] snd_hda_intel 0000:00:1f.3: PME# enabled
[   29.932430] snd_hda_intel 0000:00:1f.3: power state changed by ACPI to D3hot
[   29.933298] snd_hda_intel 0000:00:1f.3: power state changed by ACPI to D0
[   29.946198] snd_hda_intel 0000:00:1f.3: PME# disabled
[   33.899281] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x0 (reading 0xa2f08086)
[   33.900056] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x4 (reading 0x100406)
[   33.900815] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x8 (reading 0x4030000)
[   33.901570] snd_hda_intel 0000:00:1f.3: saving config space at offset 0xc (reading 0x2010)
[   33.902324] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x10 (reading 0xff020004)
[   33.903075] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x14 (reading 0x2f)
[   33.903823] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x18 (reading 0x0)
[   33.904567] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x1c (reading 0x0)
[   33.905307] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x20 (reading 0xff000004)
[   33.906047] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x24 (reading 0x2f)
[   33.906790] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x28 (reading 0x0)
[   33.907527] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x2c (reading 0x87241043)
[   33.908263] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x30 (reading 0x0)
[   33.908998] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x34 (reading 0x50)
[   33.909734] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x38 (reading 0x0)
[   33.910469] snd_hda_intel 0000:00:1f.3: saving config space at offset 0x3c (reading 0x10b)
[   33.911217] snd_hda_intel 0000:00:1f.3: PME# enabled
[   33.923097] snd_hda_intel 0000:00:1f.3: power state changed by ACPI to D3hot
[   34.953110] clocksource_wdtest: --- Verify jiffies-like uncertainty margin.
[   34.956984] clocksource: wdtest-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[   35.370304] udevd[12852]: starting version 3.2.10
[   35.966399] clocksource_wdtest: --- Verify tsc-like uncertainty margin.
[   35.967166] clocksource: wdtest-ktime: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[   35.967934] clocksource_wdtest: --- tsc-like times: 1678900524081459167 - 1678900524081458050 = 1117.
[   35.968697] clocksource_wdtest: --- Watchdog with 0x error injection, 2 retries.
[   36.099698] random: crng init done
[   36.101322] udevd[12853]: starting eudev-3.2.10
[   36.123199] BTRFS: device fsid ae174e75-7960-44f7-9ae0-3fcef5efae64 devid 1 transid 1127259 /dev/sda1 scanned by udevd (12888)
[   36.199966] xhci_hcd 0000:00:14.0: // Ding dong!
[   36.203053] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 1 ep 2
[   36.206830] xhci_hcd 0000:00:14.0: // Ding dong!
[   36.209407] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000bb6e7acd TD as cancel_status is 2
[   36.210190] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000bb6e7acd TD
[   36.210969] xhci_hcd 0000:00:14.0: Giveback URB 00000000bb6e7acd, len = 0, expected = 7, status = -115
[   36.278395] BTRFS info (device sda1): using crc32c (crc32c-intel) checksum algorithm
[   36.280840] BTRFS info (device sda1): disk space caching is enabled
[   36.458942] BTRFS info (device sda1): enabling ssd optimizations
[   36.459748] BTRFS info (device sda1): auto enabling async discard
[   38.153269] clocksource_wdtest: --- Watchdog with 1x error injection, 2 retries.
[   38.669265] udevd[13500]: starting eudev-3.2.11
[   40.286583] clocksource_wdtest: --- Watchdog with 2x error injection, 2 retries, expect message.
[   40.474828] clocksource: timekeeping watchdog on CPU8: tsc retried 2 times before success
[   41.741296] nvidia-gpu 0000:01:00.3: vgaarb: pci_notify
[   41.742290] nvidia-gpu 0000:01:00.3: runtime IRQ mapping not provided by arch
[   41.743843] i2c_dev: adapter [NVIDIA GPU I2C adapter] registered as minor 5
[   41.744985] i2c i2c-5: adapter [NVIDIA GPU I2C adapter] registered
[   41.746351] i2c i2c-5: client [ccgx-ucsi] registered with bus id 5-0008
[   41.747519] nvidia-gpu 0000:01:00.3: vgaarb: pci_notify
[   41.751344] input: PC Speaker as /devices/platform/pcspkr/input/input24
[   41.755668] e1000e 0000:00:1f.6 em1: renamed from eth0
[   41.845666] nvidia: loading out-of-tree module taints kernel.
[   41.846732] nvidia: module license 'NVIDIA' taints kernel.
[   41.847737] Disabling lock debugging due to kernel taint
[   41.894035] zram0: detected capacity change from 0 to 201326592
[   41.895843] nvidia-nvlink: Nvlink Core is being initialized, major device number 239
[   41.898166] nvidia 0000:01:00.0: vgaarb: pci_notify
[   41.900215] nvidia 0000:01:00.0: runtime IRQ mapping not provided by arch
[   41.900227] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[   41.900370] nvidia 0000:01:00.0: enabling bus mastering
[   41.903562] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[   41.903563] nvidia 0000:01:00.0: vgaarb: decoding count now is: 0
[   41.952713] nvidia 0000:01:00.0: vgaarb: pci_notify
[   41.952741] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  525.89.02  Wed Feb  1 23:23:25 UTC 2023
[   41.957760] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  525.89.02  Wed Feb  1 23:09:40 UTC 2023
[   41.958669] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[   41.958670] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[   41.976521] xhci_hcd 0000:00:14.0: // Ding dong!
[   41.976533] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 1 ep 2
[   41.976537] xhci_hcd 0000:00:14.0: // Ding dong!
[   41.976539] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000bb6e7acd TD as cancel_status is 2
[   41.976571] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000bb6e7acd TD
[   41.976572] xhci_hcd 0000:00:14.0: Giveback URB 00000000bb6e7acd, len = 0, expected = 7, status = -115
[   41.994178] zram3: detected capacity change from 0 to 402653184
[   41.995581] zram1: detected capacity change from 0 to 402653184
[   41.997015] zram2: detected capacity change from 0 to 402653184
[   42.419720] clocksource_wdtest: --- Watchdog with 3x error injection, 2 retries, expect clock skew.
[   42.475430] clocksource: timekeeping watchdog on CPU0: tsc read-back delay of 800917ns, attempt 3, marking unstable
[   42.476428] clocksource_wdtest: --- Marking wdtest-ktime unstable due to clocksource watchdog.
[   43.114371] BTRFS info (device sda1: state M): force zstd compression, level 1
[   43.114376] BTRFS info (device sda1: state M): force clearing of disk cache
[   43.114378] BTRFS info (device sda1: state M): enabling auto defrag
[   43.332066] BTRFS info (device sda1: state M): force clearing of disk cache
[   43.571207] EXT4-fs (zram1): mounted filesystem 5a9f25ed-08f3-49bd-922f-5d17b5c179ef without journal. Quota mode: disabled.
[   43.575785] EXT4-fs (zram2): mounted filesystem 0b3efb6b-49ed-4dd6-b027-945dccab5ecc without journal. Quota mode: disabled.
[   43.580406] EXT4-fs (zram3): mounted filesystem 2d0a76ed-d3b3-454f-856b-443ce453fb29 without journal. Quota mode: disabled.
[   44.656590] clocksource: wdtest-ktime: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[   44.658034] clocksource_wdtest: --- Watchdog clock-value-fuzz error injection, expect clock skew and per-CPU mismatches.
[   45.493867] nvidia-gpu 0000:01:00.3: saving config space at offset 0x0 (reading 0x1ad910de)
[   45.498015] nvidia-gpu 0000:01:00.3: saving config space at offset 0x4 (reading 0x100406)
[   45.499640] nvidia-gpu 0000:01:00.3: saving config space at offset 0x8 (reading 0xc8000a1)
[   45.500407] nvidia-gpu 0000:01:00.3: saving config space at offset 0xc (reading 0x800010)
[   45.501173] nvidia-gpu 0000:01:00.3: saving config space at offset 0x10 (reading 0xdf084000)
[   45.501938] nvidia-gpu 0000:01:00.3: saving config space at offset 0x14 (reading 0x0)
[   45.502701] nvidia-gpu 0000:01:00.3: saving config space at offset 0x18 (reading 0x0)
[   45.503469] nvidia-gpu 0000:01:00.3: saving config space at offset 0x1c (reading 0x0)
[   45.504229] nvidia-gpu 0000:01:00.3: saving config space at offset 0x20 (reading 0x0)
[   45.504989] nvidia-gpu 0000:01:00.3: saving config space at offset 0x24 (reading 0x0)
[   45.505747] nvidia-gpu 0000:01:00.3: saving config space at offset 0x28 (reading 0x0)
[   45.506503] nvidia-gpu 0000:01:00.3: saving config space at offset 0x2c (reading 0x134d10de)
[   45.507254] nvidia-gpu 0000:01:00.3: saving config space at offset 0x30 (reading 0x0)
[   45.508003] nvidia-gpu 0000:01:00.3: saving config space at offset 0x34 (reading 0x68)
[   45.508749] nvidia-gpu 0000:01:00.3: saving config space at offset 0x38 (reading 0x0)
[   45.509491] nvidia-gpu 0000:01:00.3: saving config space at offset 0x3c (reading 0x405)
[   45.510256] nvidia-gpu 0000:01:00.3: PME# enabled
[   45.673256] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'wdtest-ktime' as unstable because the skew is too large:
[   45.674287] clocksource:                       'tsc' wd_nsec: 506697701 wd_now: 3bbad7e900 wd_last: 3b4b37f0dc mask: ffffffffffffffff
[   45.675301] clocksource:                       'wdtest-ktime' cs_nsec: 706697527 cs_now: 174ca723eb32e61a cs_last: 174ca723c1138ce3 mask: ffffffffffffffff
[   45.676372] clocksource:                       'tsc' (not 'wdtest-ktime') is current clocksource.
[   45.677483] clocksource_wdtest: --- Marking wdtest-ktime unstable due to clocksource watchdog.
[   46.686586] clocksource: Checking clocksource wdtest-ktime synchronization from CPU 9 to CPUs 0-1,3,6,10.
[   46.690762] clocksource:         CPUs 0,3,10 ahead of CPU 9 for clocksource wdtest-ktime.
[   46.692540] clocksource:         CPUs 1,6 behind CPU 9 for clocksource wdtest-ktime.
[   46.693287] clocksource:         CPU 9 check durations 8764ns - 44368ns for clocksource wdtest-ktime.
[   46.694034] clocksource_wdtest: --- Done with test.
[   47.118682] elogind-daemon[14341]: New seat seat0.
[   47.120171] elogind-daemon[14341]: Watching system buttons on /dev/input/event2 (Power Button)
[   47.121035] elogind-daemon[14341]: Watching system buttons on /dev/input/event1 (Power Button)
[   47.121883] elogind-daemon[14341]: Watching system buttons on /dev/input/event0 (Sleep Button)
[   47.122907] elogind-daemon[14341]: Watching system buttons on /dev/input/event19 (Razer Razer Lycosa)
[   47.123746] elogind-daemon[14341]: Watching system buttons on /dev/input/event20 (Razer Razer Lycosa Consumer Control)
[   47.124556] elogind-daemon[14341]: Watching system buttons on /dev/input/event21 (Razer Razer Lycosa System Control)
[   47.125366] elogind-daemon[14341]: Watching system buttons on /dev/input/event22 (USB Optical Mouse  Keyboard)
[   51.317989] Adding 100663292k swap on /dev/zram0.  Priority:-2 extents:1 across:100663292k SSDscFS
[   61.089080] e1000e 0000:00:1f.6 em1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   71.396624] elogind-daemon[14341]: New session 2 of user user.
#4 lore raw
Quoted 5 lines · Emanuel Attila Czirai

On Wed, Mar 15, 2023 at 2:58 PM Alexander Potapenko <[email protected]> wrote:

Quoted 12 lines
Quoted 7 lines

Hi Emmanuel,

hello, thank you for looking into this.

Can you please share the kernel config where the problem is reproducible, along with the full dmesg?

attached both

Quoted 3 lines

Ok, so according to your dmesg, heap initialization is disabled:
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
, which causes the test failures.

The warnings indeed originate from CONFIG_TEST_REF_TRACKER=y, and seem to be yielding the desired output for that test (ccing Eric who wrote it). Perhaps that test could print something about its expectations to dmesg, but anyway there's nothing to fix in the kernel.

May I ask what is the purpose of the config in question?

#5 lore raw
Quoted 17 lines · Alexander Potapenko
Quoted 12 lines · Emanuel Attila Czirai
Quoted 7 lines · Alexander Potapenko

Hi Emmanuel,

hello, thank you for looking into this.

Can you please share the kernel config where the problem is reproducible, along with the full dmesg?

Quoted 9 lines
Quoted 5 lines

attached both

Quoted 3 lines

Ok, so according to your dmesg, heap initialization is disabled:
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
, which causes the test failures.

Looks like I've set page_poison=1 which is why I've also set init_on_free=0 init_on_alloc=0 otherwise they're considered to be =0 due to the former being 1, as per:

[ 22.533779] mem auto-init: CONFIG_PAGE_POISONING is on, will take
precedence over init_on_alloc and init_on_free
[ 22.535704] mem auto-init: stack:all(zero), heap alloc:off, heap free:off

^ that's dmesg when i try them all =1

However if I do enable heap initialization by /proc/cmdline having:
page_poison=0 init_on_free=1 init_on_alloc=1
then:

[ 25.467867] test_meminit: all 130 tests passed!

(attached dmesg for this case)

and the ref_tracker issue remains, but as you've said below, it's expected to give that output as if to show that it's able to "track" the reference properly, and it makes sense to me now. I'll do CONFIG_TEST_REF_TRACKER=n and make a note about it.

Quoted 5 lines

The warnings indeed originate from CONFIG_TEST_REF_TRACKER=y, and seem to be yielding the desired output for that test (ccing Eric who wrote it). Perhaps that test could print something about its expectations to dmesg, but anyway there's nothing to fix in the kernel.

Alright, thank you for taking a look at this. I didn't realize there were two unrelated issues here.

Quoted 2 lines

May I ask what is the purpose of the config in question?

it's what I use on my home desktop PC(but merged the laptop .config into it, didn't have the time to test it on laptop so far yet) and I've enabled all tests to catch things early in the hopes of avoiding some potential btrfs filesystem corruption(for a third time, so far) if nothing else... but otherwise it'd be just reassuring to know that things are performing within their expected parameters (with tests passing and all). I don't remember why I've tried to keep modules at a minimum though.

Best regards!

#6 lore raw
Quoted 6 lines
Quoted 6 lines

May I ask what is the purpose of the config in question?

Quoted 8 lines

it's what I use on my home desktop PC(but merged the laptop .config into it, didn't have the time to test it on laptop so far yet) and I've enabled all tests to catch things early in the hopes of avoiding some potential btrfs filesystem corruption(for a third time, so far) if nothing else... but otherwise it'd be just reassuring to know that things are performing within their expected parameters (with tests passing and all). I don't remember why I've tried to keep modules at a minimum though.

I see, thanks for the explanation.
I think many tests in lib/ may produce strange warnings that are meant to be parsed by human devs that know what to expect.
It would be nice to have them converted to KUNIT, but that's a long way to go.