New: [6.14.0_rc7] TX timeout and ping failed after change the tx queue length
https://bugzilla.kernel.org/show_bug.cgi?id=219903
Bug ID: 219903
Summary: [6.14.0_rc7] TX timeout and ping failed after change
the tx queue length
Product: Virtualization
Version: unspecified
Hardware: All
OS: Linux
Status: NEW
Severity: low
Priority: P3
Component: kvm
Assignee: [email protected]
Reporter: [email protected]
Regression: No
How reproducible:
100%
Steps to reproduce
1.Boot guest with virtio-net device and enable queue_reset:
-device virtio-net-pci,id=net0,netdev=hostnet0,queue_reset=on,bus=pcie.0,addr=0x5 \
-netdev tap,id=hostnet0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown,vhost=on \
2.Ping external host after change the tx size, ping failed
[root@guest ~]# ethtool -G eth0 tx 8
[root@guest ~]# ping 10.72.136.90 -c 10
PING 10.72.136.90 (10.72.136.90) 56(84) bytes of data. From 10.72.139.48 icmp_seq=1 Destination Host Unreachable From 10.72.139.48 icmp_seq=2 Destination Host Unreachable From 10.72.139.48 icmp_seq=3 Destination Host Unreachable From 10.72.139.48 icmp_seq=4 Destination Host Unreachable From 10.72.139.48 icmp_seq=5 Destination Host Unreachable From 10.72.139.48 icmp_seq=6 Destination Host Unreachable From 10.72.139.48 icmp_seq=7 Destination Host Unreachable
— 10.72.136.90 ping statistics —
10 packets transmitted, 0 received, +7 errors, 100% packet loss, time 9227ms pipe 4
3.Guest dmesg will repeatedly print messages like the following:
[ 488.149842] virtio_net virtio1 eth0: NETDEV WATCHDOG: CPU: 25: transmit queue 0 timed out 5004 ms [ 488.149855] virtio_net virtio1 eth0: TX timeout on queue: 0, sq: output.0,
vq: 0x1, name: output.0, 5004000 usecs ago
I don't think this is a regression issues, since this is first time to test this scenario.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.