Skip to contentSkip to conversation

New: System unsuable with intel_iommu=on

Bug 42767 Andrew Morton 1 participant 1 message Feb 13, 2012 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]/

A message that is not in the archive (sent off-list or not yet received): bug-42767-27-3bo0kxnWaOQUvHkbgXJLS5sdmw4N0Rt+2LY78lusg7I@public.gmane.org/

#2 lore raw

(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).

Quoted 115 lines · On Mon, 13 Feb 2012 20:45:21 GMT bugzilla-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq…

https://bugzilla.kernel.org/show_bug.cgi?id=42767

Summary: System unsuable with intel_iommu=on
Product: Memory Management
Version: 2.5
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
AssignedTo: akpm-de/[email protected]
ReportedBy: [email protected]
Regression: No

Hi,
i've some very strange problems since kernel 3.2.0.
When I enable the CONFIG_INTEL_IOMMU_DEFAULT_ON, the problems starts.

OS: Gentoo Linux
Kernel: Gentoo Sources 3.2.5 (tried also with vanilla 3.2.5)
Hardware: Thinkpad X200 Tablet
Bios: 3.20

The problems are, that my video card fails with 3d rendering (e.g. GNOME3 crashes) and my network card stops working after using some network i/o. When I choose intel_iommu=off, all problems disapear and everything works fine.

Feb 13 21:24:11 [kernel] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
Feb 13 21:24:11 [kernel] render error detected, EIR: 0x00000010
Feb 13 21:24:11 [kernel]   IPEIR: 0x00000000
Feb 13 21:24:11 [kernel]   IPEHR: 0x18800180
Feb 13 21:24:11 [kernel]   INSTDONE: 0xffffffff
Feb 13 21:24:11 [kernel]   INSTPS: 0x4001e020
Feb 13 21:24:11 [kernel]   INSTDONE1: 0xbfffffff
Feb 13 21:24:11 [kernel]   ACTHD: 0x013f0000
Feb 13 21:24:11 [kernel] page table error
Feb 13 21:24:11 [kernel]   PGTBL_ER: 0x00100000
Feb 13 21:25:44 [kernel] DRHD: handling fault status reg 2
Feb 13 21:25:44 [kernel] DMAR:[DMA Read] Request device [00:19.0] fault addr
fff84000
Feb 13 21:25:44 [kernel] DMAR:[fault reason 06] PTE Read access is not set
Feb 13 21:25:47 [kernel] e1000e 0000:00:19.0: eth0: Detected Hardware Unit
Hang:
Feb 13 21:25:47 [kernel]   TDH                  <57>
Feb 13 21:25:47 [kernel]   TDT                  <68>
Feb 13 21:25:47 [kernel]   next_to_use          <68>
Feb 13 21:25:47 [kernel]   next_to_clean        <56>
Feb 13 21:25:47 [kernel] buffer_info[next_to_clean]:
Feb 13 21:25:47 [kernel]   time_stamp           <fffd86c5>
Feb 13 21:25:47 [kernel]   next_to_watch        <57>
Feb 13 21:25:47 [kernel]   jiffies              <fffd91c0>
Feb 13 21:25:47 [kernel]   next_to_watch.status <0>
Feb 13 21:25:47 [kernel] MAC Status             <80383>
Feb 13 21:25:47 [kernel] PHY Status             <796d>
Feb 13 21:25:47 [kernel] PHY 1000BASE-T Status  <3c00>
Feb 13 21:25:47 [kernel] PHY Extended Status    <3000>
Feb 13 21:25:47 [kernel] PCI Status             <10>
Feb 13 21:25:48 [kernel] fbcondecor: switched decor state to 'off' on console 0
Feb 13 21:25:48 [kernel] fbcondecor: console 0 using theme
'battlestar-galactica'
Feb 13 21:25:48 [kernel] fbcondecor: switched decor state to 'on' on console 0
Feb 13 21:25:49 [kernel] e1000e 0000:00:19.0: eth0: Detected Hardware Unit
Hang:
Feb 13 21:25:49 [kernel]   TDH                  <57>
Feb 13 21:25:49 [kernel]   TDT                  <68>
Feb 13 21:25:49 [kernel]   next_to_use          <68>
Feb 13 21:25:49 [kernel]   next_to_clean        <56>
Feb 13 21:25:49 [kernel] buffer_info[next_to_clean]:
Feb 13 21:25:49 [kernel]   time_stamp           <fffd86c5>
Feb 13 21:25:49 [kernel]   next_to_watch        <57>
Feb 13 21:25:49 [kernel]   jiffies              <fffd9990>
Feb 13 21:25:49 [kernel]   next_to_watch.status <0>
Feb 13 21:25:49 [kernel] MAC Status             <80383>
Feb 13 21:25:49 [kernel] PHY Status             <796d>
Feb 13 21:25:49 [kernel] PHY 1000BASE-T Status  <3c00>
Feb 13 21:25:49 [kernel] PHY Extended Status    <3000>
Feb 13 21:25:49 [kernel] PCI Status             <10>
Feb 13 21:25:51 [kernel] ------------[ cut here ]------------
Feb 13 21:25:51 [kernel] WARNING: at net/sched/sch_generic.c:255
dev_watchdog+0x249/0x260()
Feb 13 21:25:51 [kernel] Hardware name: 7450EQG
Feb 13 21:25:51 [kernel] NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed
out
Feb 13 21:25:51 [kernel] Modules linked in:
Feb 13 21:25:51 [kernel] Pid: 0, comm: swapper/1 Not tainted 3.2.1-gentoo #1
Feb 13 21:25:51 [kernel] Call Trace:
Feb 13 21:25:51 [kernel]  <IRQ>  [<ffffffff810433bb>] ?
warn_slowpath_common+0x7b/0xc0
Feb 13 21:25:51 [kernel]  [<ffffffff810434b5>] ? warn_slowpath_fmt+0x45/0x50
Feb 13 21:25:51 [kernel]  [<ffffffff8104f9dd>] ? mod_timer+0x13d/0x240
Feb 13 21:25:51 [kernel]  [<ffffffff8156eb99>] ? dev_watchdog+0x249/0x260
Feb 13 21:25:51 [kernel]  [<ffffffff8104ef7b>] ? cascade+0x7b/0xa0
Feb 13 21:25:51 [kernel]  [<ffffffff8156e950>] ? qdisc_reset+0x40/0x40
Feb 13 21:25:51 [kernel]  [<ffffffff8104f0b6>] ? run_timer_softirq+0x116/0x270
Feb 13 21:25:51 [kernel]  [<ffffffff81049298>] ? __do_softirq+0x98/0x120
Feb 13 21:25:51 [kernel]  [<ffffffff816c84ac>] ? call_softirq+0x1c/0x30
Feb 13 21:25:51 [kernel]  [<ffffffff8100469d>] ? do_softirq+0x4d/0x80
Feb 13 21:25:51 [kernel]  [<ffffffff8104964e>] ? irq_exit+0x8e/0xd0
Feb 13 21:25:51 [kernel]  [<ffffffff8101be08>] ?
smp_apic_timer_interrupt+0x68/0xa0
Feb 13 21:25:51 [kernel]  [<ffffffff816c7c0b>] ? apic_timer_interrupt+0x6b/0x70
Feb 13 21:25:51 [kernel]  <EOI>  [<ffffffff8134225d>] ?
acpi_idle_enter_bm+0x214/0x252
Feb 13 21:25:51 [kernel]  [<ffffffff81342258>] ? acpi_idle_enter_bm+0x20f/0x252
Feb 13 21:25:51 [kernel]  [<ffffffff814c2c4a>] ? cpuidle_idle_call+0x8a/0xf0
Feb 13 21:25:51 [kernel]  [<ffffffff810011df>] ? cpu_idle+0xbf/0x110
Feb 13 21:25:51 [kernel]  [<ffffffff816b7cc9>] ? start_secondary+0x1f5/0x1fb
Feb 13 21:25:51 [kernel] ---[ end trace 71e047540e69b903 ]---
Feb 13 21:25:51 [kernel] e1000e 0000:00:19.0: eth0: Reset adapter