New: "E/xHCI: BIOS handoff failed" breaks poweroff
A message that is not in the archive (sent off-list or not yet received): [email protected]/
Bjorn Helgaas
maintainer[+cc linux-pci, Rafael, Sarah, Alan]
Quoted 6 lines · On Sun, Apr 21, 2013 at 11:41 AM, <[email protected]> wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=56931
Summary: "E/xHCI: BIOS handoff failed" breaks poweroff
Kernel Version: 3.8.8
Regression: No
Quoted 7 lines
--> (https://bugzilla.kernel.org/attachment.cgi?id=99541)
full dmesgUsually I see "EHCI: BIOS handoff failed" and "xHCI: BIOS handoff failed" in dmesg, and laptop hangs after "Power down" message. However, if I was lucky enough and "handoff failed" messages didn't appear, laptop suspends and turns off without any problems.
Thanks for the problem report. If I understand correctly, when you boot this HP Pavilion dv6, you normally see this in the dmesg:
pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001 pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001 pci 0000:19:00.0: xHCI BIOS handoff failed (BIOS bug ?) 00010401
and when you attempt a power-off, it hangs after the "Power down" message and never actually turns the power off. But sometimes, you don't see those "handoff failed" messages, and then a power-off works as expected?
I'm a little confused by the mention of "suspend."
My guess is that this is actually a USB issue, not a PCI core problem.
Quoted 2 lines
I remember that it didn't happen with old kernels (3.2 maybe). With 3.8 it happens almost always.
Sounds like this is actually a regression, but we don't have a solid idea of what kernel worked.
Quoted 7 lines
On the same laptop, Windows 7 runs fine. However, looks like there is a long pause during boot.
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.