Skip to contentSkip to conversation

New: Some amount of ifconfig cause load average increase and system freeze

Bug 60555 Bjorn Helgaas 1 participant 3 messages Sep 10, 2013 – Nov 8, 2013 2 messages not in the archive PCI

lore
Share & tools
lore

Bjorn Helgaas

author maintainer
#1 lore raw
In reply to a message not in the archive

[+cc Thomas, e1000e driver folks, linux-pci, lkml]

Quoted 19 lines · On Mon, Jul 15, 2013 at 2:31 AM, <[email protected]> wrote:

https://bugzilla.kernel.org/show_bug.cgi?id=60555

            Bug ID: 60555
           Summary: Some amount of ifconfig cause load average increase
                    and system freeze
           Product: Drivers
           Version: 2.5
    Kernel Version: 3.10.0
          Hardware: All
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: PCI
          Assignee: [email protected]
          Reporter: [email protected]
        Regression: No
Quoted 3 lines

I've faced with the situation when system stopped to process any request. Further analysis showed that the load average was around 20, and was constantly increasing (the normal LA for this system is 0.3-1).

Thanks for the report; sorry it fell through the cracks.

Is this problem reproducible? If so, can you try to reproduce it on v3.11? Can you please attach a complete dmesg log and "lspci -vv" (as root) output to the bugzilla?

The BUG_ON you're hitting is here, but I don't know what it means:

    #ifdef CONFIG_GENERIC_HARDIRQS
                for (i = 0; i < nvec; i++)
                        BUG_ON(irq_has_action(entry->irq + i));
    #endif
Quoted 55 lines

dmesg showed following:
================================
kernel BUG at drivers/pci/msi.c:342!
invalid opcode: 0000 [#1] PREEMPT SMP

Modules linked in: btusb binfmt_misc uinput ipv6 uvcvideo videobuf2_vmalloc
videobuf2_memops videobuf2_core snd_hda_codec_hdmi arc4 snd_hda_codec_conexant
snd_hda_intel iwldvm snd_hda_codec mac80211 snd_hwdep thinkpad_acpi iwlwifi
cfg80211 mperf coretemp kvm_intel kvm e1000e ptp pps_core
CPU: 0 PID: 23655 Comm: ifconfig Not tainted 3.10.0 #1
Hardware name: LENOVO 4290PW4/4290PW4, BIOS 8DET66WW (1.36 ) 10/22/2012
task: ffff880362cadb00 ti: ffff8803935b0000 task.ti: ffff8803935b0000
RIP: 0010:[<ffffffff8127308a>]  [<ffffffff8127308a>] free_msi_irqs+0x56/0x10a
RSP: 0018:ffff8803935b1c80  EFLAGS: 00010282
RAX: ffff8803a8dcb900 RBX: ffff880393653e00 RCX: 00000000fffffffa
RDX: 0000000000000000 RSI: 000000000000002a RDI: 0000000000000000
RBP: ffff8803935b1ca8 R08: ffff88040d400000 R09: 000000000000002c
R10: 00000000000000c8 R11: ffff8803935b1c5c R12: ffff880407823000
R13: ffff8804078236a8 R14: 0000000000000000 R15: 0000000000000001
FS:  00007f537f15d700(0000) GS:ffff88041e200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004026d4 CR3: 00000003a8faf000 CR4: 00000000000407f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 ffff880407823000 ffff88040629c000 00000000fffffff0 ffff880407823098
 0000000000000001 ffff8803935b1cc0 ffffffff81273a5f ffff88040629c800
 ffff8803935b1cd8 ffffffffa00283dc ffff88040629c800 ffff8803935b1d00
Call Trace:
 [<ffffffff81273a5f>] pci_disable_msi+0x2c/0x46
 [<ffffffffa00283dc>] e1000e_reset_interrupt_capability+0x4c/0x59 [e1000e]
 [<ffffffffa00286cf>] e1000_request_irq+0x1f1/0x249 [e1000e]
 [<ffffffffa002c45a>] e1000_open+0xde/0x440 [e1000e]
 [<ffffffff814b7a76>] __dev_open+0x8b/0xd0
 [<ffffffff814b7c9a>] __dev_change_flags+0xa4/0x126
 [<ffffffff814b7d8a>] dev_change_flags+0x18/0x4c
 [<ffffffff81504e85>] devinet_ioctl+0x25b/0x548
 [<ffffffff8150632d>] inet_ioctl+0x81/0x9e
 [<ffffffff814a24b0>] sock_do_ioctl+0x20/0x3d
 [<ffffffff814a28d6>] sock_ioctl+0x1fd/0x207
 [<ffffffff810f058d>] vfs_ioctl+0x18/0x34
 [<ffffffff810f0d49>] do_vfs_ioctl+0x32f/0x3e4
 [<ffffffff810eb690>] ? final_putname+0x2f/0x32
 [<ffffffff810f0e50>] SyS_ioctl+0x52/0x7d
 [<ffffffff81023c20>] ? do_page_fault+0x9/0xb
 [<ffffffff8157a652>] system_call_fastpath+0x16/0x1b
Code: 83 7b 0c 00 74 2f 8a 0b 41 bf 01 00 00 00 45 31 f6 d0 e9 83 e1 07 41 d3

e7 8b 7b 0c 44 01 f7 e8 f1 93 e1 ff 48 83 78 58 00 74 02 <0f> 0b 41 ff c6 45 39 fe 7c e4 48 8b 5b 10 48 83 eb 10 eb b8 4c
RIP [<ffffffff8127308a>] free_msi_irqs+0x56/0x10a
RSP <ffff8803935b1c80>
==================

--
You are receiving this mail because:
You are watching the assignee of the bug.

author maintainer
#2 lore raw
Quoted 32 lines · Bjorn Helgaas

[+cc Thomas, e1000e driver folks, linux-pci, lkml]

Quoted 19 lines · On Mon, Jul 15, 2013 at 2:31 AM, <[email protected]> wrote:

https://bugzilla.kernel.org/show_bug.cgi?id=60555

            Bug ID: 60555
           Summary: Some amount of ifconfig cause load average increase
                    and system freeze
           Product: Drivers
           Version: 2.5
    Kernel Version: 3.10.0
          Hardware: All
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: PCI
          Assignee: [email protected]
          Reporter: [email protected]
        Regression: No
Quoted 3 lines

I've faced with the situation when system stopped to process any request. Further analysis showed that the load average was around 20, and was constantly increasing (the normal LA for this system is 0.3-1).

Thanks for the report; sorry it fell through the cracks.

Is this problem reproducible? If so, can you try to reproduce it on v3.11? Can you please attach a complete dmesg log and "lspci -vv" (as root) output to the bugzilla?

Quoted 6 lines

The BUG_ON you're hitting is here, but I don't know what it means:

    #ifdef CONFIG_GENERIC_HARDIRQS
                for (i = 0; i < nvec; i++)
                        BUG_ON(irq_has_action(entry->irq + i));
    #endif

What's the status of this? Is it still a problem? Should we just close the bug as unreproducible?

Bjorn

author maintainer
#4 lore raw
In reply to a message not in the archive
Quoted 2 lines · Yaroslav Molochko

Sorry. I was not using this machine for quite a bit, I've updated to the new kernel and updated bug with the information you asked

Thanks.

Note that this appears to be vanilla v3.12, which has e1000e version 2.3.2-k in it. Intel maintains newer drivers out-of-tree at
http://sourceforge.net/projects/e1000/, and it's possible this is some bug that has already been fixed. The current version there looks like e1000e-2.5.4, released 2013-09-05.

I think only the Intel folks can help you out with this.

Bjorn

Quoted 46 lines
Quoted 44 lines
Quoted 33 lines
Quoted 19 lines · On Mon, Jul 15, 2013 at 2:31 AM, <[email protected]> wrote:

https://bugzilla.kernel.org/show_bug.cgi?id=60555

            Bug ID: 60555
           Summary: Some amount of ifconfig cause load average increase
                    and system freeze
           Product: Drivers
           Version: 2.5
    Kernel Version: 3.10.0
          Hardware: All
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: PCI
          Assignee: [email protected]
          Reporter: [email protected]
        Regression: No
Quoted 5 lines

I've faced with the situation when system stopped to process any request.
Further analysis showed that the load average was around 20, and was constantly
increasing (the normal LA for this system is 0.3-1).

Thanks for the report; sorry it fell through the cracks.

Is this problem reproducible? If so, can you try to reproduce it on v3.11? Can you please attach a complete dmesg log and "lspci -vv" (as root) output to the bugzilla?

Quoted 6 lines

The BUG_ON you're hitting is here, but I don't know what it means:

    #ifdef CONFIG_GENERIC_HARDIRQS
                for (i = 0; i < nvec; i++)
                        BUG_ON(irq_has_action(entry->irq + i));
    #endif

What's the status of this? Is it still a problem? Should we just close the bug as unreproducible?

Bjorn