Skip to contentSkip to conversation

New: kms mode breaks and using radeon.agpmode=-1

Bug 61811 Bjorn Helgaas 1 participant 2 messages Sep 23, 2013 – Sep 24, 2013 1 message not in the archive PCI

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]/

Bjorn Helgaas

author maintainer
#1 lore raw

[+cc linux-pci, linux-kernel, dri-devel]

Quoted 18 lines · On Sat, Sep 21, 2013 at 11:39 AM, <[email protected]> wrote:

https://bugzilla.kernel.org/show_bug.cgi?id=61811

Bug ID: 61811
Summary: kms mode breaks and using radeon.agpmode=-1
Product: Drivers
Version: 2.5
Kernel Version: 3.12
Hardware: All
OS: Linux
Tree: Fedora
Status: NEW
Severity: normal
Priority: P1
Component: PCI
Assignee: [email protected]
Reporter: [email protected]
Regression: No

Quoted 12 lines

I need to use radeon.agpmode=-1 with my rv280 based graphics card due to a long (2+ years) standing bug with the driver. Recently I was no longer able to start X because modesetting is no longer working. At boot I no longer see the resolution change and I got log entries later in Xor.0.log saying "[KMS] drm report modesetting isn't supported."
If I boot without radeon.agpmode=-1 X starts, though becomes unusable shortly due to the pre-existing but. kernel-PAE-3.12.0-0.rc0.git22.2.fc21.i686 works for me. kernel-PAE-3.12.0-0.rc0.git24.1.fc21.i686 doesn't work. (git23's build failed so I didn't test that one.)
I did a git whatchanged d5d04bb..3711d86 which I think should have showed me the commits that were in git24 and not git22 and I didn't see any specifically directed at the radeon driver. I did see some PCI related commits.

Thanks for the report! Can you attach the complete dmesg logs from the working kernel and the failing one (booted with "radeon.agpmode=-1") to the bugzilla? Also the output of "lspci -vv".

Bjorn

author maintainer
#2 lore raw

[+cc Dave]

Quoted 34 lines · Bjorn Helgaas

[+cc linux-pci, linux-kernel, dri-devel]

Quoted 18 lines · On Sat, Sep 21, 2013 at 11:39 AM, <[email protected]> wrote:

https://bugzilla.kernel.org/show_bug.cgi?id=61811

Bug ID: 61811
Summary: kms mode breaks and using radeon.agpmode=-1
Product: Drivers
Version: 2.5
Kernel Version: 3.12
Hardware: All
OS: Linux
Tree: Fedora
Status: NEW
Severity: normal
Priority: P1
Component: PCI
Assignee: [email protected]
Reporter: [email protected]
Regression: No

Quoted 12 lines

I need to use radeon.agpmode=-1 with my rv280 based graphics card due to a long (2+ years) standing bug with the driver. Recently I was no longer able to start X because modesetting is no longer working. At boot I no longer see the resolution change and I got log entries later in Xor.0.log saying "[KMS] drm report modesetting isn't supported."
If I boot without radeon.agpmode=-1 X starts, though becomes unusable shortly due to the pre-existing but. kernel-PAE-3.12.0-0.rc0.git22.2.fc21.i686 works for me. kernel-PAE-3.12.0-0.rc0.git24.1.fc21.i686 doesn't work. (git23's build failed so I didn't test that one.)
I did a git whatchanged d5d04bb..3711d86 which I think should have showed me the commits that were in git24 and not git22 and I didn't see any specifically directed at the radeon driver. I did see some PCI related commits.

Quoted 3 lines

Thanks for the report! Can you attach the complete dmesg logs from the working kernel and the failing one (booted with "radeon.agpmode=-1") to the bugzilla? Also the output of "lspci -vv".

I don't see any obvious PCI issue there, so I reassigned the bugzilla to the video folks.

Bjorn