New: 'powersave' performance excessively slow on Dell Venue 8 Pro (Baytrail tablet)
https://bugzilla.kernel.org/show_bug.cgi?id=70941
Bug ID: 70941
Summary: 'powersave' performance excessively slow on Dell Venue
8 Pro (Baytrail tablet)
Product: Power Management
Version: 2.5
Kernel Version: 3.14rc3
Hardware: i386
OS: Linux
Tree: Fedora
Status: NEW
Severity: high
Priority: P1
Component: cpufreq
Assignee: [email protected]
Reporter: [email protected]
Regression: NoI've noticed recent 3.14 kernels perform extremely sluggishly on my Venue 8 Pro (Baytrail-based tablet). Doing 'echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor' speeds things right up
again: default is 'powersave'.
Obviously performance will be faster, but powersave seems really egregiously slow. Just stuff like paging through console output at a VT is incredibly sluggish - I can run 'journalctl -b', hit End, and watch it draw one painful line at a time.
The scaling_driver is 'intel_pstate' . I think pstate stuff may have been broken on baytrail for a while - I had to boot with intel_pstate=disable for a bit, and before that it may just not have been kicking in - which is probably why I didn't notice this until rc2 or so.
The frequency range is 200MHz->1.6GHz with both 'powersave' and 'performance'. I'm not sure what's the best way to watch the scaling kick in, but using powertop or just spamming 'cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq' , it does seem to scale up rather faster with performance.
Not sure what info is needed to help debug this, just ask and I'll provide.
Signature · 2 lines
You are receiving this mail because: You are the assignee for the bug.
[Bug 70941] 'powersave' performance excessively slow on Dell Venue 8 Pro (Baytrail tablet)
https://bugzilla.kernel.org/show_bug.cgi?id=70941
Dirk Brandewie <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #1 from Dirk Brandewie <[email protected]> ---
commit fcb6a15c2e7e76d493e6f91ea889ab40e1c643a4 is the problem. I am working on a fix ATM.
Lowering the setpoint for the PID should workaround the problem
echo 90 > /sys/kernel/debug/pstate_snb/setpoint
This will cost some power though.
This also broke GregKH
https://lkml.org/lkml/2014/2/19/626
Signature · 2 lines
You are receiving this mail because: You are the assignee for the bug.
[Bug 70941] 'powersave' performance excessively slow on Dell Venue 8 Pro (Baytrail tablet)
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=70941
Lan Tianyu <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
Assignee|[email protected] |[email protected] Status|NEW |ASSIGNED CC| |[email protected]
Signature · 2 lines
You are receiving this mail because: You are the assignee for the bug.