Skip to contentSkip to conversation

Intel PMD both i40 and iavf send OP_DISABLE_VLAN_STRIPPING and it not mandatory

dpdk-dev [email protected] 2 participants 2 messages Sep 23, 2021

lore
Share & tools
lore
#0 lore raw

https://bugs.dpdk.org/show_bug.cgi?id=814

Bug ID: 814
Summary: Intel PMD both i40 and iavf send
OP_DISABLE_VLAN_STRIPPING and it not mandatory
Product: DPDK
Version: 20.11
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: Normal
Component: core
Assignee: [email protected]
Reporter: [email protected]
Target Milestone: ---

Hi Folks,

There is an issue in i40 and ivfx PMD's both drivers send optional commands that require trusted mode enabled and if OP_DISABLE_VLAN_STRIPPING discard by PF, PMD return error and not gracefully handles.

Example iavf_disable_vlan_strip() same function present in i40 that disable vlan strip. That is optional and not required and must be gracefully be handled.

EAL: Detected 4 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: No available hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: Probe PCI driver: net_iavf (8086:1889) device: 0000:13:00.0 (socket 0)
EAL: Error reading from file descriptor 26: Input/output error
EAL: No legacy callbacks, legacy socket not created
testpmd: create a new mbuf pool <mb_pool_0>: n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc

Warning! port-topology=paired and odd forward ports number, the last port will pair with itself.

Configuring Port 0 (socket 0)
iavf_execute_vf_cmd(): No response for cmd 28 iavf_disable_vlan_strip(): Failed to execute command of OP_DISABLE_VLAN_STRIPPING
iavf_init_rss(): RSS is enabled by PF by default iavf_execute_vf_cmd(): No response for cmd 24 iavf_configure_rss_lut(): Failed to execute command of OP_CONFIG_RSS_LUT iavf_dev_configure(): configure rss failed
Port0 dev_configure = -1
Fail to configure port 0
EAL: Error - exiting with code: 1
Cause: Start ports failed

Thank you,
Mus>

Signature · 2 lines
You are receiving this mail because:
You are the assignee for the bug.
#1 lore raw

The second issue is in CONFIG_RSS_LUT.

That *VIRTCHNL_OP_CONFIG_RSS_LUT*
<http://code.dpdk.org/dpdk/v20.05/ident/VIRTCHNL_OP_CONFIG_RSS_LUT>; is optional so if it returns ret it must be handled correctly.

int

*iavf_configure_rss_lut*
<http://code.dpdk.org/dpdk/v20.05/ident/iavf_configure_rss_lut>(struct
*iavf_adapter* <http://code.dpdk.org/dpdk/v20.05/ident/iavf_adapter>
*adapter)

{

struct *iavf_info*
<http://code.dpdk.org/dpdk/v20.05/ident/iavf_info> *vf = *IAVF_DEV_PRIVATE_TO_VF*
<http://code.dpdk.org/dpdk/v20.05/ident/IAVF_DEV_PRIVATE_TO_VF>(adapter);

struct *virtchnl_rss_lut*
<http://code.dpdk.org/dpdk/v20.05/ident/virtchnl_rss_lut> *rss_lut;

struct *iavf_cmd_info*
<http://code.dpdk.org/dpdk/v20.05/ident/iavf_cmd_info> args;

        int len, err = 0;



        len = sizeof(*rss_lut) + vf->vf_res->rss_lut_size - 1;

        rss_lut = *rte_zmalloc*

<http://code.dpdk.org/dpdk/v20.05/ident/rte_zmalloc>("rss_lut", len, 0);

        if (!rss_lut)

                return -ENOMEM;



        rss_lut->vsi_id = vf->vsi_res->vsi_id;

        rss_lut->lut_entries = vf->vf_res->rss_lut_size;

        *rte_memcpy*

<http://code.dpdk.org/dpdk/v20.05/ident/rte_memcpy>(rss_lut->lut,
vf->rss_lut, vf->vf_res->rss_lut_size);

args.ops = *VIRTCHNL_OP_CONFIG_RSS_LUT*
<http://code.dpdk.org/dpdk/v20.05/ident/VIRTCHNL_OP_CONFIG_RSS_LUT>;

        args.in_args = (*u8*

<http://code.dpdk.org/dpdk/v20.05/ident/u8> *)rss_lut;

        args.in_args_size = len;

        args.out_buffer = vf->aq_resp;

        args.out_size = *IAVF_AQ_BUF_SZ*

<http://code.dpdk.org/dpdk/v20.05/ident/IAVF_AQ_BUF_SZ>;

err = *iavf_execute_vf_cmd*
<http://code.dpdk.org/dpdk/v20.05/ident/iavf_execute_vf_cmd>(adapter,
&args);

        if (err)

                *PMD_DRV_LOG*

<http://code.dpdk.org/dpdk/v20.05/ident/PMD_DRV_LOG>(ERR,

                           "Failed to execute command of OP_CONFIG_RSS_LUT");



        *rte_free* <http://code.dpdk.org/dpdk/v20.05/ident/rte_free>(rss_lut);

        return err;

}

Quoted 66 lines · On Fri, Sep 24, 2021 at 12:29 AM <[email protected]> wrote:

https://bugs.dpdk.org/show_bug.cgi?id=814

Bug ID: 814
Summary: Intel PMD both i40 and iavf send
OP_DISABLE_VLAN_STRIPPING and it not mandatory
Product: DPDK
Version: 20.11
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: Normal
Component: core
Assignee: [email protected]
Reporter: [email protected]
Target Milestone: ---

Hi Folks,

There is an issue in i40 and ivfx PMD's both drivers send optional commands that require trusted mode enabled and if OP_DISABLE_VLAN_STRIPPING discard by
PF, PMD return error and not gracefully handles.

Example iavf_disable_vlan_strip() same function present in i40 that disable vlan strip. That is optional and not required and must be gracefully be handled.

EAL: Detected 4 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: No available hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: Probe PCI driver: net_iavf (8086:1889) device: 0000:13:00.0 (socket 0)
EAL: Error reading from file descriptor 26: Input/output error
EAL: No legacy callbacks, legacy socket not created
testpmd: create a new mbuf pool <mb_pool_0>: n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc

Warning! port-topology=paired and odd forward ports number, the last port will
pair with itself.

Configuring Port 0 (socket 0)
iavf_execute_vf_cmd(): No response for cmd 28 iavf_disable_vlan_strip(): Failed to execute command of OP_DISABLE_VLAN_STRIPPING
iavf_init_rss(): RSS is enabled by PF by default iavf_execute_vf_cmd(): No response for cmd 24 iavf_configure_rss_lut(): Failed to execute command of OP_CONFIG_RSS_LUT iavf_dev_configure(): configure rss failed
Port0 dev_configure = -1
Fail to configure port 0
EAL: Error - exiting with code: 1
Cause: Start ports failed

Thank you,
Mus>

--
You are receiving this mail because:
You are the assignee for the bug.