Skip to contentSkip to conversation

New: pci=assign-busses breaks power-off of T4215 laptop

Bug 84471 Bjorn Helgaas 1 participant 1 message Sep 13, 2014 1 message not in the archive PCI

lore
Share & tools
lore

Bjorn Helgaas

author maintainer
#1 lore raw
In reply to a message not in the archive

[+cc linux-pci, Andreas, switching to email for discussion]

Quoted 18 lines · On Sat, Sep 13, 2014 at 10:08 AM, <[email protected]> wrote:

https://bugzilla.kernel.org/show_bug.cgi?id=84471

            Bug ID: 84471
           Summary: pci=assign-busses breaks power-off of T4215 laptop
           Product: Drivers
           Version: 2.5
    Kernel Version: 3.17.0-rc4
          Hardware: x86-64
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: PCI
          Assignee: [email protected]
          Reporter: [email protected]
        Regression: No
Quoted 5 lines

If the kernel argument "pci=assign-busses" is specified as a kernel boot parameter, power-off does no longer work with the T4215 laptop. The machine goes through the power-down cycle, but then sits idle with a blank screen after reporting "powering down". Without the kernel parameter, power-off works correctly.

Thank you very much for the report!

It sounds like this is a regression, i.e., power-off used to work correctly with "pci=assign-busses", but it doesn't any more. If that's the case, what's the most recent kernel you know of where it worked correctly?

Can you attach complete dmesg and "lspci -vv" output (as root) both with and without "pci=assign-busses" to the bugzilla? If you have an older kernel where power-off works correctly with "pci=assign-busses", please attach the same information for that kernel, too.

Why do you use "pci=assign-busses" in the first place? This is likely a different issue, but if "pci=assign-busses" fixes something, I consider that a bug in itself, because Linux should be smart enough to do the right thing even without "pci=assign-busses". So if something on your machine requires "pci=assign-busses" in order to work, please open a second bugzilla for that.

It's possible this is the same problem reported at
https://bugzilla.kernel.org/show_bug.cgi?id=83441. We think that is related to fc1b253141b3 ("PCI: Don't scan random busses in pci_scan_bridge()"), which appeared in v3.15. I attached a test patch to that bugzilla to revert that commit. If you think it looks like the same problem, you might try testing that patch.

Thanks again,
Bjorn