Skip to contentSkip to conversation

New: PCMCIA cards not recognized in IBM 31 without pci=assign-busses

Bug 84571 Bjorn Helgaas 1 participant 1 message Sep 14, 2014 1 message not in the archive PCI

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]/

Bjorn Helgaas

author maintainer
#1 lore raw

[+cc linux-pci, Andreas, switching to email for discussion]

Quoted 19 lines · On Sun, Sep 14, 2014 at 5:29 AM, <[email protected]> wrote:

https://bugzilla.kernel.org/show_bug.cgi?id=84571

            Bug ID: 84571
           Summary: PCMCIA cards not recognized in IBM 31 without
                    pci=assign-busses
           Product: Drivers
           Version: 2.5
    Kernel Version: 3.17.0-rc4
          Hardware: i386
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: PCI
          Assignee: [email protected]
          Reporter: [email protected]
        Regression: No
Quoted 5 lines

Recent kernels do not recognize PCMCIA cards inserted into the card slot of the (admittedly old) IBM R31 laptop. The kernel argument pci=assign-busses is needed to make such cards visible (e.g. wifi cards). The PCMCIA hardware is not very spectacular, it is the typical yenta cardbus bridge. lspci -vv and dmesg will follow tomorrow.

You mention "recent kernels," so this sounds like a regression. If so, can you mark the bugzilla as a regression and mention the most recent kernel you know of where it worked without "pci=assign-busses"?
If you have that old working kernel handy, a dmesg log from it would
also be useful.

Possibly the same problem as https://bugzilla.kernel.org/show_bug.cgi?id=83441

Bjorn