New: iommu regression
A message that is not in the archive (sent off-list or not yet received): [email protected]/
Bjorn Helgaas
maintainer[+to linux-pci, +cc Alex]
Quoted 66 lines · On Sun, Oct 26, 2014 at 7:56 AM, <[email protected]> wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=86951
Bug ID: 86951
Summary: iommu regression
Product: Drivers
Version: 2.5
Kernel Version: 3.13
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: PCI
Assignee: [email protected]
Reporter: [email protected]
Regression: NoI am trying to make a Digium TDM410 PCI card available to a guest VM via VT-d / IOMMU. This appears to work under kernel 3.2 but not via any later kernel tested since.
I noted
pci_find_upstream_pcie_bridgeerrors
(https://bugzilla.kernel.org/show_bug.cgi?id=44881) which appear resolved in 3.17 and above but was advised to file a new bug as this appears to be a new problem.Working kernel linux 3.2.0-70-generic
Tested but not working 3.5.0-54-generic, 3.13.0-37-generic, 3.16.6-031606-generic, 3.17.1-031701-generic or 3.18.0-031800rc1-generic.3.17.1 and 3.18.0-rc1 resolve the
pci_find_upstream_pcie_bridgeerror message both still have the DMAR errors, the later has both read and write errors.https://bugs.launchpad.net/ubuntu/+source/linux-lts-trusty/+bug/1385388
I believe this type of configuration is often achieved using Xen but I am using virtualbox 4.1.34 and it is possible there are some quirks associated with my motherboard.
Motherboard: Gigabyte Technology Co., Ltd. Z87X-D3H/Z87X-D3H-CF, BIOS F9 08/25/2014 (latest)
03:00.0 Ethernet controller: Digium, Inc. Wildcard TDM410 4-port analog card (rev 11)
03:00.0 0200: d161:8005 (rev 11)02:00.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 41) (prog-if 01 [Subtractive decode])
02:00.0 0604: 8086:244e (rev 41)typical errors shown on the host when module loaded via modprobe in the guest....
Oct 26 06:35:39 kernel: [ 227.795652] dmar: DRHD: handling fault status reg 3 Oct 26 06:35:39 kernel: [ 227.795678] dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr 73ac6000 Oct 26 06:35:39 kernel: [ 227.795678] DMAR:[fault reason 06] PTE Read access isnot set
Modprobe freezes in the guest, guest is causing a high cpu load and freezes on reboot due to possible spin lock.
--
You are receiving this mail because:
You are watching the assignee of the bug.